← volver a la publicación›Editar / bifurcar

Publicación sin título

#4QGQdn3SfJpublic / publicnueva versión

por @amber-zebra-8262 creado 25 days ago sin caducidad 48.4 KB sintaxis: text

Tus cambios crean una nueva publicación enlazada a esta — la original no se toca.

nueva versión Tus cambios crean una nueva publicación enlazada a esta — la original no se toca.

Visibilidad Feed público Acceso public

Nota de cambio (opcional)

Esta publicación aparecerá en el feed público. Cambia Visibilidad si solo quieres compartirla por enlace.

Cancelar

#include "view_configGenerator.h"

#include <QCheckBox>
#include <QComboBox>
#include <QFileDialog>
#include <QFormLayout>
#include <QGroupBox>
#include <QHeaderView>
#include <QLabel>
#include <QLineEdit>
#include <QMessageBox>
#include <QPushButton>
#include <QSpinBox>
#include <QTableWidget>
#include <QListWidget>
#include <QTabWidget>
#include <QJsonDocument>
#include <QFile>

#include "e3d_configManager_equipment.h"

view_configGenerator::view_configGenerator(QWidget *parent)
	: QWidget(parent), currentData(new data_equipment)
	, ui(new Ui::e3d_configGenaraterClass())
{
	ui->setupUi(this);

if (this->layout()) {
		delete this->layout();
	}
	initUI();
}

view_configGenerator::~view_configGenerator()
{
	delete currentData;
	delete ui;
}

void view_configGenerator::initUI() {
	auto *mainLayout = new QVBoxLayout(this);

// 1. 顶部文件操作栏
	auto *gb_file = new QGroupBox(tr("Config File Operations"), this);
	auto *hl_file = new QHBoxLayout(gb_file);
	le_configPath = new QLineEdit(gb_file);
	pb_loadConfig = new QPushButton(tr("Load Config File"), gb_file);
	pb_saveConfigToFile = new QPushButton(tr("Save Config to File"), gb_file);
	pb_saveConfigToTemp = new QPushButton(tr("Save to Memory"), gb_file);

hl_file->addWidget(le_configPath);
	hl_file->addWidget(pb_loadConfig);
	hl_file->addWidget(pb_saveConfigToFile);
	hl_file->addWidget(pb_saveConfigToTemp);
	mainLayout->addWidget(gb_file);

// 2. Tab 页面容器
	auto *tabWidget = new QTabWidget(this);
	tabWidget->addTab(createMotionControllerTab(), tr("Motion Controllers & I/O / Axes"));
	tabWidget->addTab(createCommsTab(), tr("Comms Config"));
	tabWidget->addTab(createHeightSensorTab(), tr("Height Sensor Config"));
	tabWidget->addTab(createDispenserTab(), tr("Dispenser Config"));
	tabWidget->addTab(createExternalDeviceTab(), tr("Global External Devices"));
	tabWidget->addTab(createToolheadTab(), tr("Toolhead Config"));
	tabWidget->addTab(createCommonTab(), tr("Common Config"));

mainLayout->addWidget(tabWidget);

// 3. 信号槽绑定
	connect(pb_loadConfig, &QPushButton::clicked, this, &view_configGenerator::onLoadConfigFromFile);
	connect(pb_saveConfigToFile, &QPushButton::clicked, this, &view_configGenerator::onSaveConfigToFile);
	connect(pb_saveConfigToTemp, &QPushButton::clicked, this, &view_configGenerator::onSaveTempClicked);

// 初始化右侧面板状态（为空时不可编辑）
	updateControllerRightPanel();
	updateToolheadRightPanel();
}

void view_configGenerator::updateTableRows(QTableWidget *table, int targetCount) {
	int current = table->rowCount();
	if (targetCount > current) {
		for (int i = current; i < targetCount; ++i) {
			table->insertRow(i);
		}
	}
	else if (targetCount < current) {
		for (int i = current - 1; i >= targetCount; --i) {
			table->removeRow(i);
		}
	}
}

// ============================================================================
// 1. 控制卡 Master-Detail 页面构建
// ============================================================================
QWidget* view_configGenerator::createMotionControllerTab() {
	auto *widget = new QWidget();
	auto *mainLayout = new QHBoxLayout(widget);

auto *leftGroup = new QGroupBox(tr("Controller List"), widget);
	auto *leftLayout = new QVBoxLayout(leftGroup);

m_cardListWidget = new QListWidget(leftGroup);

auto *btnLayout = new QHBoxLayout();
	auto *btnAddCard = new QPushButton(tr("Add Card"), leftGroup);
	auto *btnDelCard = new QPushButton(tr("Delete Card"), leftGroup);
	btnLayout->addWidget(btnAddCard);
	btnLayout->addWidget(btnDelCard);

leftLayout->addWidget(m_cardListWidget);
	leftLayout->addLayout(btnLayout);

// 使用成员变量管理右侧面板 GroupBox
	m_controllerRightGroup = new QGroupBox(tr("Controller Properties & Sub-Devices"), widget);
	auto *rightLayout = new QVBoxLayout(m_controllerRightGroup);

auto *formLayout = new QFormLayout();
	m_editCardName = new QLineEdit();
	m_comboBrand = new QComboBox();
	m_comboBrand->addItem("ZMOTION","ZMOTION");
	m_comboBrand->addItem("ACS","ACS");

m_editIP = new QLineEdit("127.0.0.1");
	m_spinPort = new QSpinBox();
	m_spinPort->setRange(1, 65535);
	m_spinPort->setValue(8080);

m_editAllAxisHomePath = new QLineEdit("AllAxisHomePath");
	m_showSub = new QCheckBox();

formLayout->addRow(tr("Controller Name (userName):"), m_editCardName);
	formLayout->addRow(tr("Brand:"), m_comboBrand);
	formLayout->addRow(tr("IP Address:"), m_editIP);
	formLayout->addRow(tr("Port:"), m_spinPort);
	formLayout->addRow(tr("AllAxisHomePath:"), m_editAllAxisHomePath);
	formLayout->addRow(tr("showSub:"), m_showSub);
	rightLayout->addLayout(formLayout);

m_subConfigTab = new QTabWidget(m_controllerRightGroup);

auto *axisTabWidget = new QWidget();
	auto *axisLayout = new QVBoxLayout(axisTabWidget);
	m_axisTable = new QTableWidget(0, 9);
	m_axisTable->setSelectionBehavior(QAbstractItemView::SelectRows);
	m_axisTable->setSelectionMode(QAbstractItemView::SingleSelection);
	m_axisTable->setHorizontalHeaderLabels({
		tr("Axis Name (userName)"), tr("Axis No"), tr("Left Limit"), tr("Right Limit"),
		tr("Acc"), tr("Dec"), tr("Fast Dec"), tr("Enable Left Limit"), tr("Enable Right Limit")
		});
	m_axisTable->horizontalHeader()->setSectionResizeMode(QHeaderView::ResizeToContents);

auto *axisBtnLayout = new QHBoxLayout();
	auto *btnAddAxis = new QPushButton(tr("Add Axis"));
	auto *btnDelAxis = new QPushButton(tr("Delete Axis"));
	axisBtnLayout->addWidget(btnAddAxis);
	axisBtnLayout->addWidget(btnDelAxis);
	axisBtnLayout->addStretch();
	axisLayout->addLayout(axisBtnLayout);
	axisLayout->addWidget(m_axisTable);
	m_subConfigTab->addTab(axisTabWidget, tr("Axes (AxisInfo)"));

auto createIOTab = [this](QTableWidget*& table, const QString& title, bool isDigital) {
		auto *w = new QWidget();
		auto *ly = new QVBoxLayout(w);
		table = new QTableWidget(0, isDigital ? 3 : 2);
		table->setSelectionBehavior(QAbstractItemView::SelectRows);
		table->setSelectionMode(QAbstractItemView::SingleSelection);

if (isDigital) {
			table->setHorizontalHeaderLabels({ tr("IO Name (userName)"), tr("Main IO (Port)"), tr("Sub IO (Pin)") });
		}
		else {
			table->setHorizontalHeaderLabels({ tr("IO Name (userName)"), tr("Address") });
		}
		table->horizontalHeader()->setSectionResizeMode(QHeaderView::Stretch);

auto *bLy = new QHBoxLayout();
		auto *bAdd = new QPushButton(tr("Add IO"));
		auto *bDel = new QPushButton(tr("Delete IO"));
		bLy->addWidget(bAdd); bLy->addWidget(bDel); bLy->addStretch();
		ly->addLayout(bLy); ly->addWidget(table);

connect(bAdd, &QPushButton::clicked, this, [this, table]() { onAddIO(table); });
		connect(bDel, &QPushButton::clicked, this, [this, table]() { onDeleteIO(table); });

m_subConfigTab->addTab(w, title);
	};

createIOTab(m_dinTable, tr("Digital Input (DIN)"), true);
	createIOTab(m_doutTable, tr("Digital Output (DOUT)"), true);
	createIOTab(m_ainTable, tr("Analog Input (AIN)"), false);
	createIOTab(m_aoutTable, tr("Analog Output (AOUT)"), false);

rightLayout->addWidget(m_subConfigTab);

mainLayout->addWidget(leftGroup, 1);
	mainLayout->addWidget(m_controllerRightGroup, 3);

connect(btnAddCard, &QPushButton::clicked, this, &view_configGenerator::onAddController);
	connect(btnDelCard, &QPushButton::clicked, this, &view_configGenerator::onDeleteController);
	connect(m_cardListWidget, &QListWidget::currentRowChanged, this, &view_configGenerator::onControllerSelected);

connect(btnAddAxis, &QPushButton::clicked, this, &view_configGenerator::onAddAxis);
	connect(btnDelAxis, &QPushButton::clicked, this, &view_configGenerator::onDeleteAxis);

return widget;
}

// ============================================================================
// 2. 通讯模块页构建 (Comms Config)
// ============================================================================
QWidget* view_configGenerator::createCommsTab() {
	auto *widget = new QWidget();
	auto *layout = new QVBoxLayout(widget);

auto *hl_comms = new QHBoxLayout();
	auto *btnAdd = new QPushButton(tr("Add Comms Module"), widget);
	auto *btnDel = new QPushButton(tr("Delete Selected"), widget);
	hl_comms->addWidget(btnAdd);
	hl_comms->addWidget(btnDel);

hl_comms->addSpacing(20);
	hl_comms->addWidget(new QLabel(tr("Comms Module Count:")));
	sb_count_Comms = new QSpinBox();
	sb_count_Comms->setRange(0, 50);
	hl_comms->addWidget(sb_count_Comms);
	hl_comms->addStretch();
	layout->addLayout(hl_comms);

tw_Comms = new QTableWidget(0, 12);
	tw_Comms->setSelectionBehavior(QAbstractItemView::SelectRows);
	tw_Comms->setSelectionMode(QAbstractItemView::SingleSelection);
	tw_Comms->setHorizontalHeaderLabels({
		tr("Comms Name"), tr("Type"), tr("Port Name"), tr("Baud Rate"),
		tr("Parity"), tr("Data Bits"), tr("Stop Bits"), tr("IP Address"),
		tr("TCP Port"), tr("Slave Addr"), tr("Timeout(ms)"), tr("Retry Times")
		});
	tw_Comms->horizontalHeader()->setSectionResizeMode(QHeaderView::ResizeToContents);
	layout->addWidget(tw_Comms);

auto addCommsRow = [this](int r) {
		tw_Comms->setItem(r, 0, new QTableWidgetItem(QString("Comms_%1").arg(r + 1)));

auto *cbType = new QComboBox();
		cbType->addItems(toStringList<data_CommsConfig::CommsType>());
		tw_Comms->setCellWidget(r, 1, cbType);

tw_Comms->setItem(r, 2, new QTableWidgetItem("COM1"));
		tw_Comms->setItem(r, 3, new QTableWidgetItem("115200"));
		tw_Comms->setItem(r, 4, new QTableWidgetItem("N"));
		tw_Comms->setItem(r, 5, new QTableWidgetItem("8"));
		tw_Comms->setItem(r, 6, new QTableWidgetItem("1"));

tw_Comms->setItem(r, 7, new QTableWidgetItem("192.168.1.100"));
		tw_Comms->setItem(r, 8, new QTableWidgetItem("8080"));

tw_Comms->setItem(r, 9, new QTableWidgetItem("1"));
		tw_Comms->setItem(r, 10, new QTableWidgetItem("1000"));
		tw_Comms->setItem(r, 11, new QTableWidgetItem("2"));
	};

connect(btnAdd, &QPushButton::clicked, [this, addCommsRow]() {
		int r = tw_Comms->rowCount();
		tw_Comms->insertRow(r);
		addCommsRow(r);
		sb_count_Comms->blockSignals(true);
		sb_count_Comms->setValue(tw_Comms->rowCount());
		sb_count_Comms->blockSignals(false);
	});

connect(btnDel, &QPushButton::clicked, [this]() {
		int r = tw_Comms->currentRow();
		if (r >= 0) {
			tw_Comms->removeRow(r);
			sb_count_Comms->blockSignals(true);
			sb_count_Comms->setValue(tw_Comms->rowCount());
			sb_count_Comms->blockSignals(false);
		}
	});

connect(sb_count_Comms, QOverload<int>::of(&QSpinBox::valueChanged), [this, addCommsRow](int val) {
		int oldRow = tw_Comms->rowCount();
		updateTableRows(tw_Comms, val);
		for (int i = oldRow; i < val; ++i) {
			addCommsRow(i);
		}
	});

return widget;
}

// ============================================================================
// 3. 测距传感器配置页构建 (Height Sensor Config) - 新增 m_commsChannelName 列
// ============================================================================
QWidget* view_configGenerator::createHeightSensorTab() {
	auto *widget = new QWidget();
	auto *layout = new QVBoxLayout(widget);

auto *hl = new QHBoxLayout();
	auto *btnAdd = new QPushButton(tr("Add Height Sensor"), widget);
	auto *btnDel = new QPushButton(tr("Delete Selected"), widget);
	hl->addWidget(btnAdd);
	hl->addWidget(btnDel);

hl->addSpacing(20);
	hl->addWidget(new QLabel(tr("Height Sensor Count:")));
	sb_count_HeightSensor = new QSpinBox();
	sb_count_HeightSensor->setRange(0, 20);
	hl->addWidget(sb_count_HeightSensor);
	hl->addStretch();
	layout->addLayout(hl);

tw_HeightSensor = new QTableWidget(0, 9);
	tw_HeightSensor->setSelectionBehavior(QAbstractItemView::SelectRows);
	tw_HeightSensor->setSelectionMode(QAbstractItemView::SingleSelection);
	tw_HeightSensor->setHorizontalHeaderLabels({
		tr("Sensor Name"),
		tr("Comms Channel Name"),
		tr("Comm Type"),
		tr("MSR Addr (Hex/Dec)"),
		tr("Status Addr (Hex/Dec)"),
		tr("Same Dir with Axis"),
		tr("Min Range"),
		tr("Max Range"),
		tr("Offset")
		});
	tw_HeightSensor->horizontalHeader()->setSectionResizeMode(QHeaderView::ResizeToContents);
	layout->addWidget(tw_HeightSensor);

auto addSensorRow = [this](int r) {
		tw_HeightSensor->setItem(r, 0, new QTableWidgetItem(QString("HeightSensor_%1").arg(r + 1)));
		tw_HeightSensor->setItem(r, 1, new QTableWidgetItem("COM_Channel_1"));

auto *cbComm = new QComboBox();
		cbComm->addItems(toStringList<data_HeightSensorConfig::HeightSensorType>());
		tw_HeightSensor->setCellWidget(r, 2, cbComm);

tw_HeightSensor->setItem(r, 3, new QTableWidgetItem("0x6000"));
		tw_HeightSensor->setItem(r, 4, new QTableWidgetItem("0x6001"));

auto *chk = new QCheckBox();
		auto *pContainer = new QWidget();
		auto *pLayout = new QHBoxLayout(pContainer);
		pLayout->addWidget(chk);
		pLayout->setAlignment(Qt::AlignCenter);
		pLayout->setContentsMargins(0, 0, 0, 0);
		tw_HeightSensor->setCellWidget(r, 5, pContainer);

tw_HeightSensor->setItem(r, 6, new QTableWidgetItem("0.0"));
		tw_HeightSensor->setItem(r, 7, new QTableWidgetItem("100.0"));
		tw_HeightSensor->setItem(r, 8, new QTableWidgetItem("0.0"));
	};

connect(btnAdd, &QPushButton::clicked, [this, addSensorRow]() {
		int r = tw_HeightSensor->rowCount();
		tw_HeightSensor->insertRow(r);
		addSensorRow(r);
		sb_count_HeightSensor->blockSignals(true);
		sb_count_HeightSensor->setValue(tw_HeightSensor->rowCount());
		sb_count_HeightSensor->blockSignals(false);
	});

connect(btnDel, &QPushButton::clicked, [this]() {
		int r = tw_HeightSensor->currentRow();
		if (r >= 0) {
			tw_HeightSensor->removeRow(r);
			sb_count_HeightSensor->blockSignals(true);
			sb_count_HeightSensor->setValue(tw_HeightSensor->rowCount());
			sb_count_HeightSensor->blockSignals(false);
		}
	});

connect(sb_count_HeightSensor, QOverload<int>::of(&QSpinBox::valueChanged), [this, addSensorRow](int val) {
		int oldRow = tw_HeightSensor->rowCount();
		updateTableRows(tw_HeightSensor, val);
		for (int i = oldRow; i < val; ++i) {
			addSensorRow(i);
		}
	});

return widget;
}

// ============================================================================
// 4. 点胶机配置页构建 (Dispenser Config) - 新增 m_commsChannelName 列
// ============================================================================
QWidget* view_configGenerator::createDispenserTab() {
	auto *widget = new QWidget();
	auto *layout = new QVBoxLayout(widget);

auto *hl = new QHBoxLayout();
	auto *btnAdd = new QPushButton(tr("Add Dispenser"), widget);
	auto *btnDel = new QPushButton(tr("Delete Selected"), widget);
	hl->addWidget(btnAdd);
	hl->addWidget(btnDel);

hl->addSpacing(20);
	hl->addWidget(new QLabel(tr("Dispenser Count:")));
	sb_count_Dispenser = new QSpinBox();
	sb_count_Dispenser->setRange(0, 20);
	hl->addWidget(sb_count_Dispenser);
	hl->addStretch();
	layout->addLayout(hl);

tw_Dispenser = new QTableWidget(0, 17);
	tw_Dispenser->setSelectionBehavior(QAbstractItemView::SelectRows);
	tw_Dispenser->setSelectionMode(QAbstractItemView::SingleSelection);
	tw_Dispenser->setHorizontalHeaderLabels({
		tr("Dispenser Name"),
		tr("Comms Channel/Controller Name"), tr("CommType"), tr("Port"), tr("BaudRate"), tr("Parity"), tr("DataBits"), tr("StopBits"),
		tr("Analog Addr"), tr("Min Pressure"), tr("Max Pressure"),
		tr("Default Pressure"), tr("Default Time(s)"), tr("Switch IO"), tr("Switch State"),
		tr("MainIO OpenGas"), tr("SubIO OpenGas")
		});
	tw_Dispenser->horizontalHeader()->setSectionResizeMode(QHeaderView::ResizeToContents);
	layout->addWidget(tw_Dispenser);

auto addDispenserRow = [this](int r) {

int i = 0;
		tw_Dispenser->setItem(r, i++, new QTableWidgetItem("Dispenser1"));
		tw_Dispenser->setItem(r, i++, new QTableWidgetItem("ZMOTION_1"));

auto *cbComm = new QComboBox();
		cbComm->addItems(toStringList<data_DispenserConfig::DispenserType>());
		tw_Dispenser->setCellWidget(r, i++, cbComm);

tw_Dispenser->setItem(r, i++, new QTableWidgetItem("COM1"));
		tw_Dispenser->setItem(r, i++, new QTableWidgetItem("9600"));
		tw_Dispenser->setItem(r, i++, new QTableWidgetItem("N"));
		tw_Dispenser->setItem(r, i++, new QTableWidgetItem("8"));
		tw_Dispenser->setItem(r, i++, new QTableWidgetItem("1"));

tw_Dispenser->setItem(r, i++, new QTableWidgetItem("0"));
		tw_Dispenser->setItem(r, i++, new QTableWidgetItem("0.0"));
		tw_Dispenser->setItem(r, i++, new QTableWidgetItem("100.0"));

tw_Dispenser->setItem(r, i++, new QTableWidgetItem("0.2"));
		tw_Dispenser->setItem(r, i++, new QTableWidgetItem("0.5"));
		tw_Dispenser->setItem(r, i++, new QTableWidgetItem("0"));

tw_Dispenser->setItem(r,i++, new QTableWidgetItem("0"));
		tw_Dispenser->setItem(r,i++, new QTableWidgetItem("0"));
	};

connect(btnAdd, &QPushButton::clicked, [this, addDispenserRow]() {
		int r = tw_Dispenser->rowCount();
		tw_Dispenser->insertRow(r);
		addDispenserRow(r);
		sb_count_Dispenser->blockSignals(true);
		sb_count_Dispenser->setValue(tw_Dispenser->rowCount());
		sb_count_Dispenser->blockSignals(false);
	});

connect(btnDel, &QPushButton::clicked, [this]() {
		int r = tw_Dispenser->currentRow();
		if (r >= 0) {
			tw_Dispenser->removeRow(r);
			sb_count_Dispenser->blockSignals(true);
			sb_count_Dispenser->setValue(tw_Dispenser->rowCount());
			sb_count_Dispenser->blockSignals(false);
		}
	});

connect(sb_count_Dispenser, QOverload<int>::of(&QSpinBox::valueChanged), [this, addDispenserRow](int val) {
		int oldRow = tw_Dispenser->rowCount();
		updateTableRows(tw_Dispenser, val);
		for (int i = oldRow; i < val; ++i) {
			addDispenserRow(i);
		}
	});

return widget;
}

// ============================================================================
// 5. 全局外设配置页构建 (External Device Config) - 追加 m_commsChannelName 列
// ============================================================================
QWidget* view_configGenerator::createExternalDeviceTab() {
	auto *widget = new QWidget();
	auto *layout = new QVBoxLayout(widget);

auto *hl = new QHBoxLayout();
	auto *btnAdd = new QPushButton(tr("Add External Device"), widget);
	auto *btnDel = new QPushButton(tr("Delete Selected"), widget);
	hl->addWidget(btnAdd);
	hl->addWidget(btnDel);

hl->addSpacing(20);
	hl->addWidget(new QLabel(tr("External Device Count:")));
	sb_count_ExternalDevice = new QSpinBox();
	sb_count_ExternalDevice->setRange(0, 50);
	hl->addWidget(sb_count_ExternalDevice);
	hl->addStretch();
	layout->addLayout(hl);

tw_ExternalDevice = new QTableWidget(0, 6);
	tw_ExternalDevice->setSelectionBehavior(QAbstractItemView::SelectRows);
	tw_ExternalDevice->setSelectionMode(QAbstractItemView::SingleSelection);
	tw_ExternalDevice->setHorizontalHeaderLabels({
		tr("Device Name (userName)"),
		tr("Device Type"),
		tr("Comms Channel Name"),
		tr("Pos X"),
		tr("Pos Y"),
		tr("Pos Z")
		});
	tw_ExternalDevice->horizontalHeader()->setSectionResizeMode(QHeaderView::Stretch);
	layout->addWidget(tw_ExternalDevice);

auto addExtDevRow = [this](int r) {
		tw_ExternalDevice->setItem(r, 0, new QTableWidgetItem(QString("ExtDevice_%1").arg(r + 1)));
		tw_ExternalDevice->setItem(r, 1, new QTableWidgetItem("HeightSensor"));
		tw_ExternalDevice->setItem(r, 2, new QTableWidgetItem("Comms_Channel_1"));
		tw_ExternalDevice->setItem(r, 3, new QTableWidgetItem("0.0"));
		tw_ExternalDevice->setItem(r, 4, new QTableWidgetItem("0.0"));
		tw_ExternalDevice->setItem(r, 5, new QTableWidgetItem("0.0"));
	};

connect(btnAdd, &QPushButton::clicked, [this, addExtDevRow]() {
		int r = tw_ExternalDevice->rowCount();
		tw_ExternalDevice->insertRow(r);
		addExtDevRow(r);
		sb_count_ExternalDevice->blockSignals(true);
		sb_count_ExternalDevice->setValue(tw_ExternalDevice->rowCount());
		sb_count_ExternalDevice->blockSignals(false);
	});

connect(btnDel, &QPushButton::clicked, [this]() {
		int r = tw_ExternalDevice->currentRow();
		if (r >= 0) {
			tw_ExternalDevice->removeRow(r);
			sb_count_ExternalDevice->blockSignals(true);
			sb_count_ExternalDevice->setValue(tw_ExternalDevice->rowCount());
			sb_count_ExternalDevice->blockSignals(false);
		}
	});

connect(sb_count_ExternalDevice, QOverload<int>::of(&QSpinBox::valueChanged), [this, addExtDevRow](int val) {
		int oldRow = tw_ExternalDevice->rowCount();
		updateTableRows(tw_ExternalDevice, val);
		for (int i = oldRow; i < val; ++i) {
			addExtDevRow(i);
		}
	});

return widget;
}

// ============================================================================
// 6. 工作头配置页构建 (Toolhead Config)
// ============================================================================
QWidget* view_configGenerator::createToolheadTab() {
	auto *widget = new QWidget();
	auto *mainLayout = new QHBoxLayout(widget);

auto *leftGroup = new QGroupBox(tr("Toolhead List"), widget);
	auto *leftLayout = new QVBoxLayout(leftGroup);

m_toolheadListWidget = new QListWidget(leftGroup);

auto *btnLayout = new QHBoxLayout();
	auto *btnAddToolhead = new QPushButton(tr("Add Toolhead"), leftGroup);
	auto *btnDelToolhead = new QPushButton(tr("Delete Toolhead"), leftGroup);
	btnLayout->addWidget(btnAddToolhead);
	btnLayout->addWidget(btnDelToolhead);

leftLayout->addWidget(m_toolheadListWidget);
	leftLayout->addLayout(btnLayout);

m_toolheadRightGroup = new QGroupBox(tr("Toolhead Properties & Mounted Devices"), widget);
	auto *rightLayout = new QVBoxLayout(m_toolheadRightGroup);

auto *formLayout = new QFormLayout();
	m_editToolheadName = new QLineEdit();
	m_chkIsVirtualToolhead = new QCheckBox(tr("Is Virtual Toolhead (Z-axis does not move)"));
	m_editBindMotionGroup = new QLineEdit("XY_Stage_1");
	m_editBindZAxis = new QLineEdit("Z_Axis_1");

formLayout->addRow(tr("Toolhead Name (userName):"), m_editToolheadName);
	formLayout->addRow(tr("Virtual Flag:"), m_chkIsVirtualToolhead);
	formLayout->addRow(tr("Bind Motion Group (XY Stage):"), m_editBindMotionGroup);
	formLayout->addRow(tr("Bind Z Axis Name:"), m_editBindZAxis);
	rightLayout->addLayout(formLayout);

auto *gbMountedDevs = new QGroupBox(tr("Mounted Devices List (mountedDevices)"), m_toolheadRightGroup);
	auto *mountedLayout = new QVBoxLayout(gbMountedDevs);

m_mountedDevicesTable = new QTableWidget(0, 3);
	m_mountedDevicesTable->setSelectionBehavior(QAbstractItemView::SelectRows);
	m_mountedDevicesTable->setSelectionMode(QAbstractItemView::SingleSelection);
	m_mountedDevicesTable->setHorizontalHeaderLabels({
		tr("Device Name (userName)"),
		tr("Device Type"),
		tr("Comms Channel Name")
		});
	m_mountedDevicesTable->horizontalHeader()->setSectionResizeMode(QHeaderView::Stretch);

auto *mDevBtnLayout = new QHBoxLayout();
	auto *btnAddMDev = new QPushButton(tr("Add Mounted Device"));
	auto *btnDelMDev = new QPushButton(tr("Delete Mounted Device"));
	mDevBtnLayout->addWidget(btnAddMDev);
	mDevBtnLayout->addWidget(btnDelMDev);
	mDevBtnLayout->addStretch();

mountedLayout->addLayout(mDevBtnLayout);
	mountedLayout->addWidget(m_mountedDevicesTable);

rightLayout->addWidget(gbMountedDevs);

mainLayout->addWidget(leftGroup, 1);
	mainLayout->addWidget(m_toolheadRightGroup, 3);

connect(btnAddToolhead, &QPushButton::clicked, this, &view_configGenerator::onAddToolhead);
	connect(btnDelToolhead, &QPushButton::clicked, this, &view_configGenerator::onDeleteToolhead);
	connect(m_toolheadListWidget, &QListWidget::currentRowChanged, this, &view_configGenerator::onToolheadSelected);

connect(btnAddMDev, &QPushButton::clicked, this, &view_configGenerator::onAddMountedDevice);
	connect(btnDelMDev, &QPushButton::clicked, this, &view_configGenerator::onDeleteMountedDevice);

return widget;
}

// ============================================================================
// 7. 通用配置页构建 (Common Config)
// ============================================================================
QWidget* view_configGenerator::createCommonTab() {
	auto *widget = new QWidget();
	auto *layout = new QFormLayout(widget);
	le_softwareName = new QLineEdit("ConfigGeneratorApp", widget);
	layout->addRow(tr("Software Name:"), le_softwareName);
	return widget;
}

// ============================================================================
// 控制卡 UI 交互槽实现
// ============================================================================

void view_configGenerator::onAddController() {
	saveCurrentControllerFromUI();

data_motion_controller newCard;
	newCard.m_userName = QString("Card_%1").arg(m_controllerList.size() + 1);
	m_controllerList.append(newCard);

m_cardListWidget->addItem(newCard.m_userName);
	m_cardListWidget->setCurrentRow(m_controllerList.size() - 1);
}

void view_configGenerator::onDeleteController() {
	int row = m_cardListWidget->currentRow();
	if (row < 0 || row >= m_controllerList.size()) return;

m_controllerList.removeAt(row);
	delete m_cardListWidget->takeItem(row);

m_currentCardIndex = -1;
	if (!m_controllerList.isEmpty()) {
		int nextRow = qMin(row, m_controllerList.size() - 1);
		m_cardListWidget->setCurrentRow(nextRow);
	}
	else {
		updateControllerRightPanel();
	}
}

void view_configGenerator::onControllerSelected(int currentRow) {
	if (currentRow == m_currentCardIndex) return;

saveCurrentControllerFromUI();

m_currentCardIndex = currentRow;
	updateControllerRightPanel();
}

void view_configGenerator::saveCurrentControllerFromUI() {
	if (m_currentCardIndex < 0 || m_currentCardIndex >= m_controllerList.size()) return;

data_motion_controller &card = m_controllerList[m_currentCardIndex];
	card.m_userName = m_editCardName->text().trimmed();
	card.motionControllerType = toEnum<data_motion_controller::MotionControllerType>(m_comboBrand->currentData().toString());
	card.ipAddress = m_editIP->text().trimmed();
	card.port = m_spinPort->value();

card.homePath_total = m_editAllAxisHomePath->text().trimmed();
	card.b_showSub = m_showSub->isChecked();

if (auto *item = m_cardListWidget->item(m_currentCardIndex)) {
		item->setText(card.m_userName);
	}

card.data_axisInfo.clear();
	for (int r = 0; r < m_axisTable->rowCount(); ++r) {
		data_AxisInfo axis;
		axis.m_userName = m_axisTable->item(r, 0) ? m_axisTable->item(r, 0)->text() : "";
		axis.axisNo = m_axisTable->item(r, 1) ? m_axisTable->item(r, 1)->text().toInt() : 0;
		axis.soft_leftLimit = m_axisTable->item(r, 2) ? m_axisTable->item(r, 2)->text().toDouble() : 0;
		axis.soft_rightLimit = m_axisTable->item(r, 3) ? m_axisTable->item(r, 3)->text().toDouble() : 0;
		axis.acc = m_axisTable->item(r, 4) ? m_axisTable->item(r, 4)->text().toDouble() : 500;
		axis.dec = m_axisTable->item(r, 5) ? m_axisTable->item(r, 5)->text().toDouble() : 500;
		axis.fastDec = m_axisTable->item(r, 6) ? m_axisTable->item(r, 6)->text().toDouble() : 500;

if (auto *chkL = qobject_cast<QCheckBox*>(m_axisTable->cellWidget(r, 7)))
			axis.enable_leftSoftWareLimit = chkL->isChecked();
		if (auto *chkR = qobject_cast<QCheckBox*>(m_axisTable->cellWidget(r, 8)))
			axis.enable_rightSoftWareLimit = chkR->isChecked();

axis.currentControllerName = card.m_userName;

card.data_axisInfo.append(axis);
	}

auto saveDigitalIO = [&](QTableWidget* table, QList<data_DoInfo>& list) {
		list.clear();
		for (int r = 0; r < table->rowCount(); ++r) {
			data_DoInfo io;
			io.m_userName = table->item(r, 0) ? table->item(r, 0)->text() : "";
			io.mainIO = table->item(r, 1) ? table->item(r, 1)->text().toInt() : 0;
			io.subIO = table->item(r, 2) ? table->item(r, 2)->text().toInt() : 0;
			io.currentControllerName = card.m_userName;
			io.showSub = card.b_showSub;
			list.append(io);
		}
	};

saveDigitalIO(m_dinTable, card.data_Din);
	saveDigitalIO(m_doutTable, card.data_Dout);

auto saveAnalogIO = [&](QTableWidget* table, QList<data_AoInfo>& list) {
		list.clear();
		for (int r = 0; r < table->rowCount(); ++r) {
			data_AoInfo io;
			io.m_userName = table->item(r, 0) ? table->item(r, 0)->text() : "";
			io.address = table->item(r, 1) ? table->item(r, 1)->text().toInt() : 0;
			io.currentControllerName = card.m_userName;
			io.showSub = card.b_showSub;
			list.append(io);
		}
	};

saveAnalogIO(m_ainTable, card.data_Ain);
	saveAnalogIO(m_aoutTable, card.data_Aout);
}

void view_configGenerator::clearControllerRightPanel() {
	m_editCardName->clear();
	m_editIP->clear();
	m_spinPort->setValue(8080);
	m_axisTable->setRowCount(0);
	m_dinTable->setRowCount(0);
	m_doutTable->setRowCount(0);
	m_ainTable->setRowCount(0);
	m_aoutTable->setRowCount(0);
}

void view_configGenerator::updateControllerRightPanel() {
	if (m_currentCardIndex < 0 || m_currentCardIndex >= m_controllerList.size()) {
		m_controllerRightGroup->setEnabled(false);
		clearControllerRightPanel();
		return;
	}

m_controllerRightGroup->setEnabled(true);
	const data_motion_controller &card = m_controllerList[m_currentCardIndex];

m_editCardName->setText(card.m_userName);
	int brandIdx = m_comboBrand->findData(toString(card.motionControllerType));
	m_comboBrand->setCurrentIndex(brandIdx >= 0 ? brandIdx : 0);
	m_editIP->setText(card.ipAddress);
	m_spinPort->setValue(card.port);
	m_editAllAxisHomePath->setText(card.homePath_total);
	m_showSub->setChecked(card.b_showSub);

m_axisTable->setRowCount(0);
	for (const auto& axis : card.data_axisInfo) {
		int r = m_axisTable->rowCount();
		m_axisTable->insertRow(r);
		m_axisTable->setItem(r, 0, new QTableWidgetItem(axis.m_userName));
		m_axisTable->setItem(r, 1, new QTableWidgetItem(QString::number(axis.axisNo)));
		m_axisTable->setItem(r, 2, new QTableWidgetItem(QString::number(axis.soft_leftLimit)));
		m_axisTable->setItem(r, 3, new QTableWidgetItem(QString::number(axis.soft_rightLimit)));
		m_axisTable->setItem(r, 4, new QTableWidgetItem(QString::number(axis.acc)));
		m_axisTable->setItem(r, 5, new QTableWidgetItem(QString::number(axis.dec)));
		m_axisTable->setItem(r, 6, new QTableWidgetItem(QString::number(axis.fastDec)));

auto *chkL = new QCheckBox(); chkL->setChecked(axis.enable_leftSoftWareLimit);
		m_axisTable->setCellWidget(r, 7, chkL);

auto *chkR = new QCheckBox(); chkR->setChecked(axis.enable_rightSoftWareLimit);
		m_axisTable->setCellWidget(r, 8, chkR);
	}

auto fillDigitalIO = [](QTableWidget* table, const QList<data_DoInfo>& list) {
		table->setRowCount(0);
		for (const auto& io : list) {
			int r = table->rowCount();
			table->insertRow(r);
			table->setItem(r, 0, new QTableWidgetItem(io.m_userName));
			table->setItem(r, 1, new QTableWidgetItem(QString::number(io.mainIO)));
			table->setItem(r, 2, new QTableWidgetItem(QString::number(io.subIO)));
		}
	};

fillDigitalIO(m_dinTable, card.data_Din);
	fillDigitalIO(m_doutTable, card.data_Dout);

auto fillAnalogIO = [](QTableWidget* table, const QList<data_AoInfo>& list) {
		table->setRowCount(0);
		for (const auto& io : list) {
			int r = table->rowCount();
			table->insertRow(r);
			table->setItem(r, 0, new QTableWidgetItem(io.m_userName));
			table->setItem(r, 1, new QTableWidgetItem(QString::number(io.address)));
		}
	};

fillAnalogIO(m_ainTable, card.data_Ain);
	fillAnalogIO(m_aoutTable, card.data_Aout);
}

void view_configGenerator::onAddAxis() {
	int r = m_axisTable->rowCount();
	m_axisTable->insertRow(r);
	m_axisTable->setItem(r, 0, new QTableWidgetItem(QString("Axis_%1").arg(r + 1)));
	m_axisTable->setItem(r, 1, new QTableWidgetItem(QString::number(r)));
	m_axisTable->setItem(r, 2, new QTableWidgetItem("-1000.0"));
	m_axisTable->setItem(r, 3, new QTableWidgetItem("1000.0"));
	m_axisTable->setItem(r, 4, new QTableWidgetItem("500.0"));
	m_axisTable->setItem(r, 5, new QTableWidgetItem("500.0"));
	m_axisTable->setItem(r, 6, new QTableWidgetItem("1000.0"));

m_axisTable->setCellWidget(r, 7, new QCheckBox());
	m_axisTable->setCellWidget(r, 8, new QCheckBox());
}

void view_configGenerator::onDeleteAxis() {
	int r = m_axisTable->currentRow();
	if (r >= 0) m_axisTable->removeRow(r);
}

void view_configGenerator::onAddIO(QTableWidget* table) {
	int r = table->rowCount();
	table->insertRow(r);
	table->setItem(r, 0, new QTableWidgetItem(QString("IO_%1").arg(r + 1)));
	table->setItem(r, 1, new QTableWidgetItem("0"));
	if (table->columnCount() > 2) {
		table->setItem(r, 2, new QTableWidgetItem("0"));
	}
}

void view_configGenerator::onDeleteIO(QTableWidget* table) {
	int r = table->currentRow();
	if (r >= 0) table->removeRow(r);
}

// ============================================================================
// 工作头 (Toolhead) Master-Detail UI 交互槽实现
// ============================================================================

void view_configGenerator::onAddToolhead() {
	saveCurrentToolheadFromUI();

data_ToolheadConfig newToolhead;
	newToolhead.m_userName = QString("Toolhead_%1").arg(m_toolheadList.size() + 1);
	m_toolheadList.append(newToolhead);

m_toolheadListWidget->addItem(newToolhead.m_userName);
	m_toolheadListWidget->setCurrentRow(m_toolheadList.size() - 1);
}

void view_configGenerator::onDeleteToolhead() {
	int row = m_toolheadListWidget->currentRow();
	if (row < 0 || row >= m_toolheadList.size()) return;

m_toolheadList.removeAt(row);
	delete m_toolheadListWidget->takeItem(row);

m_currentToolheadIndex = -1;
	if (!m_toolheadList.isEmpty()) {
		int nextRow = qMin(row, m_toolheadList.size() - 1);
		m_toolheadListWidget->setCurrentRow(nextRow);
	}
	else {
		updateToolheadRightPanel();
	}
}

void view_configGenerator::onToolheadSelected(int currentRow) {
	if (currentRow == m_currentToolheadIndex) return;

saveCurrentToolheadFromUI();

m_currentToolheadIndex = currentRow;
	updateToolheadRightPanel();
}

void view_configGenerator::saveCurrentToolheadFromUI() {
	if (m_currentToolheadIndex < 0 || m_currentToolheadIndex >= m_toolheadList.size()) return;

data_ToolheadConfig &th = m_toolheadList[m_currentToolheadIndex];
	th.m_userName = m_editToolheadName->text().trimmed();
	th.b_isVirtual = m_chkIsVirtualToolhead->isChecked();
	th.bindMotionGroup = m_editBindMotionGroup->text().trimmed();
	th.bindZAxisName = m_editBindZAxis->text().trimmed();

if (auto *item = m_toolheadListWidget->item(m_currentToolheadIndex)) {
		item->setText(th.m_userName);
	}

th.mountedDevices.clear();
	for (int r = 0; r < m_mountedDevicesTable->rowCount(); ++r) {
		data_externalDevice dev;
		dev.m_userName = m_mountedDevicesTable->item(r, 0) ? m_mountedDevicesTable->item(r, 0)->text() : "";
		dev.m_deviceType = toEnum<data_externalDevice::ExternalDeviceType>( m_mountedDevicesTable->item(r, 1) ? m_mountedDevicesTable->item(r, 1)->text() : "");
		dev.m_commsChannelName = m_mountedDevicesTable->item(r, 2) ? m_mountedDevicesTable->item(r, 2)->text() : "";

th.mountedDevices.append(dev);
	}
}

void view_configGenerator::clearToolheadRightPanel() {
	m_editToolheadName->clear();
	m_chkIsVirtualToolhead->setChecked(false);
	m_editBindMotionGroup->clear();
	m_editBindZAxis->clear();
	m_mountedDevicesTable->setRowCount(0);
}

void view_configGenerator::updateToolheadRightPanel() {
	if (m_currentToolheadIndex < 0 || m_currentToolheadIndex >= m_toolheadList.size()) {
		m_toolheadRightGroup->setEnabled(false);
		clearToolheadRightPanel();
		return;
	}

m_toolheadRightGroup->setEnabled(true);
	const data_ToolheadConfig &th = m_toolheadList[m_currentToolheadIndex];

m_editToolheadName->setText(th.m_userName);
	m_chkIsVirtualToolhead->setChecked(th.b_isVirtual);
	m_editBindMotionGroup->setText(th.bindMotionGroup);
	m_editBindZAxis->setText(th.bindZAxisName);

m_mountedDevicesTable->setRowCount(0);
	for (const auto& dev : th.mountedDevices) {
		int r = m_mountedDevicesTable->rowCount();
		m_mountedDevicesTable->insertRow(r);
		m_mountedDevicesTable->setItem(r, 0, new QTableWidgetItem(dev.m_userName));
		m_mountedDevicesTable->setItem(r, 1, new QTableWidgetItem(toString( dev.m_deviceType)));
		m_mountedDevicesTable->setItem(r, 2, new QTableWidgetItem(dev.m_commsChannelName));
	}
}

void view_configGenerator::onAddMountedDevice() {
	int r = m_mountedDevicesTable->rowCount();
	m_mountedDevicesTable->insertRow(r);
	m_mountedDevicesTable->setItem(r, 0, new QTableWidgetItem(QString("MountedDev_%1").arg(r + 1)));
	m_mountedDevicesTable->setItem(r, 1, new QTableWidgetItem("DispenserNozzle"));
	m_mountedDevicesTable->setItem(r, 2, new QTableWidgetItem("Comms_Channel_1"));
}

void view_configGenerator::onDeleteMountedDevice() {
	int r = m_mountedDevicesTable->currentRow();
	if (r >= 0) m_mountedDevicesTable->removeRow(r);
}

// ============================================================================
// 数据同步与 JSON 序列化读写
// ============================================================================

QJsonObject view_configGenerator::saveToTempJson() {
	saveCurrentControllerFromUI();
	saveCurrentToolheadFromUI();

data_equipment config;
	config.deviceName = le_softwareName->text().trimmed();

// 1. 读取 Motion Controller 列表
	config.data_motion_controller_configs = m_controllerList;

// 2. 读取 通讯模块 列表
	for (int i = 0; i < tw_Comms->rowCount(); ++i) {
		data_CommsConfig comm;
		comm.m_userName = tw_Comms->item(i, 0) ? tw_Comms->item(i, 0)->text() : "";

if (auto *cbType = qobject_cast<QComboBox*>(tw_Comms->cellWidget(i, 1))) {
			comm.commsType =toEnum<data_CommsConfig::CommsType>(cbType->currentText()) ;
		}

comm.portName = tw_Comms->item(i, 2) ? tw_Comms->item(i, 2)->text() : "COM1";
		comm.baudRate = tw_Comms->item(i, 3) ? tw_Comms->item(i, 3)->text().toInt() : 115200;

QString parityStr = tw_Comms->item(i, 4) ? tw_Comms->item(i, 4)->text() : "N";
		comm.parity = parityStr.isEmpty() ? 'N' : parityStr.at(0).toLatin1();

comm.dataBits = tw_Comms->item(i, 5) ? tw_Comms->item(i, 5)->text().toInt() : 8;
		comm.stopBits = tw_Comms->item(i, 6) ? tw_Comms->item(i, 6)->text().toInt() : 1;

comm.ip = tw_Comms->item(i, 7) ? tw_Comms->item(i, 7)->text() : "192.168.1.100";
		comm.tcpPort = tw_Comms->item(i, 8) ? tw_Comms->item(i, 8)->text().toInt() : 8080;

comm.slaveAddress = tw_Comms->item(i, 9) ? tw_Comms->item(i, 9)->text().toInt() : 1;
		comm.timeoutMs = tw_Comms->item(i, 10) ? tw_Comms->item(i, 10)->text().toInt() : 1000;
		comm.retryTimes = tw_Comms->item(i, 11) ? tw_Comms->item(i, 11)->text().toInt() : 2;

config.data_comms_configs.append(comm);
	}

// 3. 读取 测距传感器 列表 (Height Sensor)
	for (int i = 0; i < tw_HeightSensor->rowCount(); ++i) {
		data_HeightSensorConfig sensor;
		
		sensor.m_userName = tw_HeightSensor->item(i, 0) ? tw_HeightSensor->item(i, 0)->text() : "";
		sensor.m_commsChannelName = tw_HeightSensor->item(i, 1) ? tw_HeightSensor->item(i, 1)->text() : "";
	
		sensor.m_deviceType =data_externalDevice::HEIGHT_SENSOR;

if (auto *cbComm = qobject_cast<QComboBox*>(tw_HeightSensor->cellWidget(i, 2))) {
			sensor.commType = cbComm->currentText();
		}

QString msrAddrStr = tw_HeightSensor->item(i, 3) ? tw_HeightSensor->item(i, 3)->text() : "0x6000";
		bool ok = false;
		sensor.msrAddress = msrAddrStr.toUInt(&ok, 0);

QString statusAddrStr = tw_HeightSensor->item(i, 4) ? tw_HeightSensor->item(i, 4)->text() : "0x6001";
		sensor.statusAddress = statusAddrStr.toUInt(&ok, 0);

if (auto *pContainer = tw_HeightSensor->cellWidget(i, 5)) {
			if (auto *chk = pContainer->findChild<QCheckBox*>()) {
				sensor.b_same_direction_with_axis = chk->isChecked();
			}
		}

sensor.minRange = tw_HeightSensor->item(i, 6) ? tw_HeightSensor->item(i, 6)->text().toDouble() : 0.0;
		sensor.maxRange = tw_HeightSensor->item(i, 7) ? tw_HeightSensor->item(i, 7)->text().toDouble() : 0.0;
		sensor.offset = tw_HeightSensor->item(i, 8) ? tw_HeightSensor->item(i, 8)->text().toDouble() : 0.0;

config.data_heightSensor_configs.append(sensor);
	}

// 4. 读取 Dispenser 列表
	for (int i = 0; i < tw_Dispenser->rowCount(); ++i) {
		data_DispenserConfig disp;
		int j = 0;

disp.m_userName = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text() : "";
		j++;

disp.m_commsChannelName = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text() : "";
		j++;

disp.m_deviceType = data_externalDevice::ExternalDeviceType::DISPENSOR;
		if (auto *cbComm = qobject_cast<QComboBox*>(tw_Dispenser->cellWidget(i, j))) {
			disp.commType = cbComm->currentText();
		}
		j++;
		disp.port = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text() : "COM1";
		j++;
		disp.baudRate = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text().toInt() : 9600;
		j++;

QString parityStr = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text() : "N";
		disp.parity = parityStr.isEmpty() ? 'N' : parityStr.at(0).toLatin1();
		j++;

disp.dataBits = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text().toInt() : 8;
		j++;
		disp.stopBits = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text().toInt() : 1;
		j++;

disp.analogAddress = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text().toInt() : 0;
		j++;
		disp.minPressure = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text().toFloat() : 0.0f;
		j++;
		disp.maxPressure = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text().toFloat() : 100.0f;
		j++;

disp.defaultPressure = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text().toDouble() : 0.2;
		j++;
		disp.defaultDispenseTime = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text().toDouble() : 0.5;
		j++;
		disp.outputSwitchIO = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text().toInt() : 0;
		j++;

if (auto *pContainer = tw_Dispenser->cellWidget(i, j)) {
			if (auto *chk = pContainer->findChild<QCheckBox*>()) {
				disp.state_outputSwitch = chk->isChecked();
			}
		}
		j++;
		disp.mainIO_openGas = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i, j)->text().toInt() : 0;
		j++;
		disp.subIO_openGas = tw_Dispenser->item(i, j) ? tw_Dispenser->item(i,j)->text().toInt() : 0;
		j++;

config.data_dispenser_configs.append(disp);
	}

// 5. 读取 External Devices 全局外设列表
	for (int i = 0; i < tw_ExternalDevice->rowCount(); ++i) {
		data_externalDevice dev;
		dev.m_userName = tw_ExternalDevice->item(i, 0) ? tw_ExternalDevice->item(i, 0)->text() : "";
		dev.m_deviceType =toEnum<data_externalDevice::ExternalDeviceType>( tw_ExternalDevice->item(i, 1) ? tw_ExternalDevice->item(i, 1)->text() : "");
		dev.m_commsChannelName = tw_ExternalDevice->item(i, 2) ? tw_ExternalDevice->item(i, 2)->text() : "";

dev.pos_x = tw_ExternalDevice->item(i, 3) ? tw_ExternalDevice->item(i, 3)->text().toDouble() : 0.0;
		dev.pos_y = tw_ExternalDevice->item(i, 4) ? tw_ExternalDevice->item(i, 4)->text().toDouble() : 0.0;
		dev.pos_z = tw_ExternalDevice->item(i, 5) ? tw_ExternalDevice->item(i, 5)->text().toDouble() : 0.0;

config.data_external_device_configs.append(dev);
	}

// 6. 读取 Toolhead 工作头列表
	config.data_toolhead_configs = m_toolheadList;

*currentData = config;
	return config.toJson();
}

void view_configGenerator::loadFromTempJson(const QJsonObject& json) {
	data_equipment config;
	config.fromJson(json);

*currentData = config;
	le_softwareName->setText(config.deviceName);

// 1. 加载 Motion Controller 数组
	m_controllerList = config.data_motion_controller_configs;
	m_cardListWidget->clear();
	for (const auto& card : m_controllerList) {
		m_cardListWidget->addItem(card.m_userName);
	}
	m_currentCardIndex = -1;
	if (!m_controllerList.isEmpty()) {
		m_cardListWidget->setCurrentRow(0);
	}
	else {
		updateControllerRightPanel();
	}

// 2. 加载 通讯模块
	sb_count_Comms->setValue(config.data_comms_configs.size());
	for (int i = 0; i < config.data_comms_configs.size(); ++i) {
		const auto &comm = config.data_comms_configs[i];

tw_Comms->setItem(i, 0, new QTableWidgetItem(comm.m_userName));

if (auto *cbType = qobject_cast<QComboBox*>(tw_Comms->cellWidget(i, 1))) {
			cbType->setCurrentText(toString(comm.commsType) );
		}

tw_Comms->setItem(i, 2, new QTableWidgetItem(comm.portName));
		tw_Comms->setItem(i, 3, new QTableWidgetItem(QString::number(comm.baudRate)));
		tw_Comms->setItem(i, 4, new QTableWidgetItem(QString(comm.parity)));
		tw_Comms->setItem(i, 5, new QTableWidgetItem(QString::number(comm.dataBits)));
		tw_Comms->setItem(i, 6, new QTableWidgetItem(QString::number(comm.stopBits)));

tw_Comms->setItem(i, 7, new QTableWidgetItem(comm.ip));
		tw_Comms->setItem(i, 8, new QTableWidgetItem(QString::number(comm.tcpPort)));

tw_Comms->setItem(i, 9, new QTableWidgetItem(QString::number(comm.slaveAddress)));
		tw_Comms->setItem(i, 10, new QTableWidgetItem(QString::number(comm.timeoutMs)));
		tw_Comms->setItem(i, 11, new QTableWidgetItem(QString::number(comm.retryTimes)));
	}

// 3. 加载 测距传感器 (Height Sensor)
	sb_count_HeightSensor->setValue(config.data_heightSensor_configs.size());
	for (int i = 0; i < config.data_heightSensor_configs.size(); ++i) {
		const auto &sensor = config.data_heightSensor_configs[i];

tw_HeightSensor->setItem(i, 0, new QTableWidgetItem(sensor.m_userName));
		tw_HeightSensor->setItem(i, 1, new QTableWidgetItem(sensor.m_commsChannelName));

if (auto *cbComm = qobject_cast<QComboBox*>(tw_HeightSensor->cellWidget(i, 2))) {
			cbComm->setCurrentText(sensor.commType);
		}

tw_HeightSensor->setItem(i, 3, new QTableWidgetItem(QString("0x%1").arg(sensor.msrAddress, 4, 16, QChar('0'))));
		tw_HeightSensor->setItem(i, 4, new QTableWidgetItem(QString("0x%1").arg(sensor.statusAddress, 4, 16, QChar('0'))));

if (auto *pContainer = tw_HeightSensor->cellWidget(i, 5)) {
			if (auto *chk = pContainer->findChild<QCheckBox*>()) {
				chk->setChecked(sensor.b_same_direction_with_axis);
			}
		}

tw_HeightSensor->setItem(i, 6, new QTableWidgetItem(QString::number(sensor.minRange)));
		tw_HeightSensor->setItem(i, 7, new QTableWidgetItem(QString::number(sensor.maxRange)));
		tw_HeightSensor->setItem(i, 8, new QTableWidgetItem(QString::number(sensor.offset)));
	}

// 4. 加载 Dispenser
	sb_count_Dispenser->setValue(config.data_dispenser_configs.size());
	for (int i = 0; i < config.data_dispenser_configs.size(); ++i) {
		const auto &disp = config.data_dispenser_configs[i];
		int j = 0;
		tw_Dispenser->setItem(i, j++, new QTableWidgetItem(disp.m_userName));
		tw_Dispenser->setItem(i, j++, new QTableWidgetItem(disp.m_commsChannelName));

if (auto *cbComm = qobject_cast<QComboBox*>(tw_Dispenser->cellWidget(i, j++))) {
			cbComm->setCurrentText(disp.commType);
		}

tw_Dispenser->setItem(i,j++, new QTableWidgetItem(disp.port));
		tw_Dispenser->setItem(i,j++, new QTableWidgetItem(QString::number(disp.baudRate)));
		tw_Dispenser->setItem(i,j++, new QTableWidgetItem(QString(disp.parity)));
		tw_Dispenser->setItem(i,j++, new QTableWidgetItem(QString::number(disp.dataBits)));
		tw_Dispenser->setItem(i,j++, new QTableWidgetItem(QString::number(disp.stopBits)));

tw_Dispenser->setItem(i,j++, new QTableWidgetItem(QString::number(disp.analogAddress)));
		tw_Dispenser->setItem(i,j++, new QTableWidgetItem(QString::number(disp.minPressure)));
		tw_Dispenser->setItem(i,j++, new QTableWidgetItem(QString::number(disp.maxPressure)));

tw_Dispenser->setItem(i,j++, new QTableWidgetItem(QString::number(disp.defaultPressure)));
		tw_Dispenser->setItem(i,j++, new QTableWidgetItem(QString::number(disp.defaultDispenseTime)));
		tw_Dispenser->setItem(i,j++, new QTableWidgetItem(QString::number(disp.outputSwitchIO)));

if (auto *pContainer = tw_Dispenser->cellWidget(i, j++)) {
			if (auto *chk = pContainer->findChild<QCheckBox*>()) {
				chk->setChecked(disp.state_outputSwitch);
			}
		}

tw_Dispenser->setItem(i, j++, new QTableWidgetItem(QString::number(disp.mainIO_openGas)));
		tw_Dispenser->setItem(i, j++, new QTableWidgetItem(QString::number(disp.subIO_openGas)));
	}

// 5. 加载 External Devices 全局外设
	sb_count_ExternalDevice->setValue(config.data_external_device_configs.size());
	for (int i = 0; i < config.data_external_device_configs.size(); ++i) {
		const auto &dev = config.data_external_device_configs[i];

tw_ExternalDevice->setItem(i, 0, new QTableWidgetItem(dev.m_userName));
		tw_ExternalDevice->setItem(i, 1, new QTableWidgetItem(dev.m_deviceType));
		tw_ExternalDevice->setItem(i, 2, new QTableWidgetItem(dev.m_commsChannelName));

tw_ExternalDevice->setItem(i, 3, new QTableWidgetItem(QString::number(dev.pos_x)));
		tw_ExternalDevice->setItem(i, 4, new QTableWidgetItem(QString::number(dev.pos_y)));
		tw_ExternalDevice->setItem(i, 5, new QTableWidgetItem(QString::number(dev.pos_z)));
	}

// 6. 加载 Toolhead 工作头数组
	m_toolheadList = config.data_toolhead_configs;
	m_toolheadListWidget->clear();
	for (const auto& th : m_toolheadList) {
		m_toolheadListWidget->addItem(th.m_userName);
	}
	m_currentToolheadIndex = -1;
	if (!m_toolheadList.isEmpty()) {
		m_toolheadListWidget->setCurrentRow(0);
	}
	else {
		updateToolheadRightPanel();
	}
}

// 文件加载与保存槽函数
void view_configGenerator::onLoadConfigFromFile() {
	QString path = QFileDialog::getOpenFileName(this, tr("Open Config File"), "", tr("e3d Files (*.e3d *.json)"));
	if (path.isEmpty()) return;

QFile file(path);
	if (!file.open(QIODevice::ReadOnly)) {
		QMessageBox::critical(this, tr("Error"), tr("Failed to open configuration file!"));
		return;
	}

QJsonDocument doc = QJsonDocument::fromJson(file.readAll());
	file.close();

le_configPath->setText(path);
	loadFromTempJson(doc.object());
	QMessageBox::information(this, tr("Information"), tr("Configuration file loaded successfully!"));
}

void view_configGenerator::onSaveConfigToFile() {
	saveToTempJson();

if (!e3d_configManager_Equipment::Instance()->saveToFile_dialog(currentData)) {
		return;
	}
}

void view_configGenerator::onSaveTempClicked() {
	saveToTempJson();
	QMessageBox::information(this, tr("Information"), tr("Configuration saved to temporary memory!"));
}