rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262096
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262096
[ 0.000000] On node 0 totalpages: 262096
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32465 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F9470 checksum 0
[ 0.000000] ACPI: RSDP 000F9470, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT 3FFD0100, 0044 (r1 A M I OEMXSDT 1000613 MSFT 97)
[ 0.000000] ACPI: FACP 3FFD0290, 00F4 (r3 A M I OEMFACP 1000613 MSFT 97)
[ 0.000000] ACPI: DSDT 3FFD0430, 4650 (r1 P50CA F20_____ 1 INTL 2002026)
[ 0.000000] ACPI: FACS 3FFDE000, 0040
[ 0.000000] ACPI: APIC 3FFD0390, 0060 (r1 A M I OEMAPIC 1000613 MSFT 97)
[ 0.000000] ACPI: MCFG 3FFD03F0, 003C (r1 A M I OEMMCFG 1000613 MSFT 97)
[ 0.000000] ACPI: OEMB 3FFDE040, 005B (r1 A M I AMI_OEM 1000613 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 260049
[ 0.000000] Kernel command line: initrd=/boot/initrd.img-2.6.22-14-generic root=/dev/hda4 ro BOOT_IMAGE=/boot/vmlinuz-2.6.22-14-generic
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffb000 (fecc0000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 800.099 MHz processor.
[ 15.909648] Console: colour VGA+ 80x25
[ 15.913333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.914210] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.957693] Memory: 1027512k/1048384k available (2015k kernel code, 20208k reserved, 916k data, 364k init, 130880k highmem)
[ 15.957786] virtual kernel memory layout:
[ 15.957788] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 15.957792] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.957795] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.957798] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.957801] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 15.957804] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 15.957806] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 15.958286] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.958470] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 16.038517] Calibrating delay using timer specific routine.. 1602.42 BogoMIPS (lpj=3204851)
[ 16.038680] Security Framework v1.0.0 initialized
[ 16.038749] SELinux: Disabled at boot.
[ 16.038833] Mount-cache hash table entries: 512
[ 16.039099] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 16.039117] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.039183] CPU: L2 Cache: 1024K (64 bytes/line)
[ 16.039247] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 16.039267] Compat vDSO mapped to ffffe000.
[ 16.039345] Checking 'hlt' instruction... OK.
[ 16.054780] SMP alternatives: switching to UP code
[ 16.055177] Freeing SMP alternatives: 11k freed
[ 16.055736] Early unpacking initramfs... done
[ 16.803143] ACPI: Core revision 20070126
[ 16.803330] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 16.808066] CPU0: AMD Mobile AMD Athlon(tm) 64 Processor 4000+ stepping 02
[ 16.808315] Total of 1 processors activated (1602.42 BogoMIPS).
[ 16.808972] ENABLING IO-APIC IRQs
[ 16.809363] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 16.953962] Brought up 1 CPUs
[ 16.954214] Booting paravirtualized kernel on bare hardware
[ 16.954386] Time: 11:49:10 Date: 03/24/108
[ 16.954477] NET: Registered protocol family 16
[ 16.954661] EISA bus registered
[ 16.954741] ACPI: bus type pci registered
[ 16.955847] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 16.955911] PCI: Using configuration type 1
[ 16.955973] Setting up standard PCI resources
[ 16.965252] ACPI: EC: Look up EC in DSDT
[ 16.965528] ACPI: EC: GPE=0x00, ports=0x66, 0x62
[ 16.970814] ACPI: Interpreter enabled
[ 16.970878] ACPI: (supports S0 S1 S3 S4 S5)
[ 16.971276] ACPI: Using IOAPIC for interrupt routing
[ 16.987191] ACPI: EC: GPE=0x00, ports=0x66, 0x62
[ 16.987445] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.987521] PCI: Probing PCI hardware (bus 00)
[ 16.989418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.989752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 16.989960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 17.053306] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 17.054211] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 17.055106] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 17.056005] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 17.057006] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 17.058018] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 17.059032] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 17.060033] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 17.060864] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.060945] pnp: PnP ACPI init
[ 17.061015] ACPI: bus type pnp registered
[ 17.064411] pnp: PnP ACPI: found 11 devices
[ 17.064475] ACPI: ACPI bus type pnp unregistered
[ 17.064540] PnPBIOS: Disabled by ACPI PNP
[ 17.064663] PCI: Using ACPI for IRQ routing
[ 17.064728] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.064803] PCI: Cannot allocate resource region 7 of bridge 0000:00:03.0
[ 17.064869] PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
[ 17.064934] PCI: Cannot allocate resource region 8 of bridge 0000:00:03.2
[ 17.085177] NET: Registered protocol family 8
[ 17.085240] NET: Registered protocol family 20
[ 17.085392] pnp: 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 17.085465] pnp: 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
[ 17.085537] pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
[ 17.085612] pnp: 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 17.085678] pnp: 00:0a: iomem range 0xc0000-0xcffff could not be reserved
[ 17.085744] pnp: 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 17.085811] pnp: 00:0a: iomem range 0x100000-0x3fffffff could not be reserved
[ 17.085879] Time: tsc clocksource has been installed.
[ 17.116405] PCI: Bridge: 0000:00:01.0
[ 17.116468] IO window: disabled.
[ 17.116533] MEM window: disabled.
[ 17.116596] PREFETCH window: disabled.
[ 17.116662] PCI: Bridge: 0000:00:02.0
[ 17.116725] IO window: 9000-bfff
[ 17.116792] MEM window: fea00000-feafffff
[ 17.116857] PREFETCH window: aff00000-bfefffff
[ 17.116923] PCI: Bridge: 0000:00:03.0
[ 17.116985] IO window: disabled.
[ 17.117050] MEM window: disabled.
[ 17.117113] PREFETCH window: disabled.
[ 17.117179] PCI: Bridge: 0000:00:03.2
[ 17.117240] IO window: disabled.
[ 17.117305] MEM window: disabled.
[ 17.117368] PREFETCH window: disabled.
[ 17.117449] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 17.117474] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
[ 17.117600] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 17.117622] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 17
[ 17.117748] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 17.117767] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 31 (level, low) -> IRQ 17
[ 17.117897] PCI: Setting latency timer of device 0000:00:03.2 to 64
[ 17.117919] NET: Registered protocol family 2
[ 17.157827] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.158065] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 17.160150] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 17.160888] TCP: Hash tables configured (established 131072 bind 65536)
[ 17.160953] TCP reno registered
[ 17.169994] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[ 17.870840] it is
[ 18.630228] Freeing initrd memory: 7341k freed
[ 18.630954] audit: initializing netlink socket (disabled)
[ 18.631033] audit(1209037751.524:1): initialized
[ 18.631198] highmem bounce pool size: 64 pages
[ 18.634429] VFS: Disk quotas dquot_6.5.1
[ 18.634571] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.634773] io scheduler noop registered
[ 18.634837] io scheduler anticipatory registered
[ 18.634900] io scheduler deadline registered
[ 18.634987] io scheduler cfq registered (default)
[ 18.635069] PCI: VIA PCI bridge detected. Disabling DAC.
[ 18.635227] Boot video device is 0000:02:00.0
[ 18.635379] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 18.635429] assign_interrupt_mode Found MSI capability
[ 18.635495] Allocate Port Service[0000:00:02.0:pcie00]
[ 18.635611] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 18.635660] assign_interrupt_mode Found MSI capability
[ 18.635725] Allocate Port Service[0000:00:03.0:pcie00]
[ 18.635838] PCI: Setting latency timer of device 0000:00:03.2 to 64
[ 18.635887] assign_interrupt_mode Found MSI capability
[ 18.635952] Allocate Port Service[0000:00:03.2:pcie00]
[ 18.636161] isapnp: Scanning for PnP cards...
[ 18.990667] isapnp: No Plug & Play device found
[ 19.038230] Real Time Clock Driver v1.12ac
[ 19.038447] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 19.040367] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 19.040795] input: Macintosh mouse button emulation as /class/input/input0
[ 19.040975] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 19.047347] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 19.048308] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.048375] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 19.048440] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 19.048516] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 19.048581] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 19.048936] mice: PS/2 mouse device common for all mice
[ 19.049605] EISA: Probing bus 0 at eisa.0
[ 19.049723] EISA: Detected 0 cards.
[ 19.049924] TCP cubic registered
[ 19.050003] NET: Registered protocol family 1
[ 19.050098] Using IPI No-Shortcut mode
[ 19.050489] Magic number: 4:743:833
[ 19.051180] Freeing unused kernel memory: 364k freed
[ 19.092489] input: AT Translated Set 2 keyboard as /class/input/input1
[ 19.478285] AppArmor: AppArmor initialized<5>audit(1209037752.024:2): type=1505 info="AppArmor initialized" pid=1207
[ 19.496113] fuse init (API version 7.8)
[ 19.508296] Failure registering capabilities with primary security module.
[ 19.544801] ACPI: CPU0 (power states: C1[C1] C3[C3])
[ 19.545026] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 19.546848] ACPI: Thermal Zone [THRM] (50 C)
[ 20.995361] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 20.995464] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 18
[ 20.995781] eth0: RTL8169sb/8110sb at 0xf883a400, 00:03:0d:35:e2:2e, XID 10000000 IRQ 18
[ 21.041484] SCSI subsystem initialized
[ 21.050639] libata version 2.21 loaded.
[ 21.053112] sata_via 0000:00:0f.0: version 2.2
[ 21.053145] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 19
[ 21.053331] sata_via 0000:00:0f.0: routed to hard irq line 3
[ 21.053483] scsi0 : sata_via
[ 21.053610] scsi1 : sata_via
[ 21.054053] ata1: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e482 bmdma 0x0001e000 irq 19
[ 21.054128] ata2: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e082 bmdma 0x0001e008 irq 19
[ 21.144382] usbcore: registered new interface driver usbfs
[ 21.144487] usbcore: registered new interface driver hub
[ 21.251935] usbcore: registered new device driver usb
[ 21.253556] USB Universal Host Controller Interface driver v3.0
[ 21.254891] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 21.466751] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 21.488170] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 21.538239] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 21.538437] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 21.538572] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 21.538864] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 21.538967] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00
[ 21.539245] usb usb1: configuration #1 chosen from 1 choice
[ 21.539353] hub 1-0:1.0: USB hub found
[ 21.539425] hub 1-0:1.0: 2 ports detected
[ 21.549661] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 21.549734] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 21.642818] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
[ 21.642960] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 21.643068] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 21.643167] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d480
[ 21.643405] usb usb2: configuration #1 chosen from 1 choice
[ 21.643511] hub 2-0:1.0: USB hub found
[ 21.643582] hub 2-0:1.0: 2 ports detected
[ 21.746749] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
[ 21.746892] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 21.746993] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 21.747090] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400
[ 21.747340] usb usb3: configuration #1 chosen from 1 choice
[ 21.747449] hub 3-0:1.0: USB hub found
[ 21.747532] hub 3-0:1.0: 2 ports detected
[ 21.850628] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
[ 21.850769] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 21.850869] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 21.850966] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d080
[ 21.851203] usb usb4: configuration #1 chosen from 1 choice
[ 21.851317] hub 4-0:1.0: USB hub found
[ 21.851388] hub 4-0:1.0: 2 ports detected
[ 21.955077] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[ 21.955213] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 21.955311] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 21.955430] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff000
[ 21.955500] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.955694] usb usb5: configuration #1 chosen from 1 choice
[ 21.955798] hub 5-0:1.0: USB hub found
[ 21.955869] hub 5-0:1.0: 8 ports detected
[ 22.058652] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 22.058743] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 19
[ 22.058877] VP_IDE: chipset revision 6
[ 22.058939] VP_IDE: not 100% native mode: will probe irqs later
[ 22.059015] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 22.059093] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[ 22.059277] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[ 22.059456] Probing IDE interface ide0...
[ 22.474118] hda: HTS421210H9AT00, ATA DISK drive
[ 22.805911] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d5651c06b34]
[ 23.146031] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 23.164876] Probing IDE interface ide1...
[ 7.732000] Marking TSC unstable due to: TSC halts in C3.
[ 7.736000] Time: acpi_pm clocksource has been installed.
[ 7.972000] hdc: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive
[ 8.648000] ide1 at 0x170-0x177,0x376 on irq 15
[ 8.676000] hda: max request size: 512KiB
[ 8.676000] hda: 195371568 sectors (100030 MB) w/7528KiB Cache, CHS=16383/255/63, UDMA(100)
[ 8.676000] hda: cache flushes supported
[ 8.676000] hda: hda1 hda2 hda3 < hda5 > hda4
[ 8.760000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 8.760000] Uniform CD-ROM driver Revision: 3.20
[ 9.308000] kjournald starting. Commit interval 5 seconds
[ 9.308000] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.220000] udev: renamed network interface eth0 to eth1
[ 25.416000] Linux agpgart interface v0.102 (c) Dave Jones
[ 27.100000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 27.104000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.144000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 29.640000] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
[ 29.640000] [fglrx] ASYNCIO init succeed!
[ 29.640000] [fglrx] PAT is enabled successfully!
[ 29.792000] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 29.972000] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22
[ 29.976000] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 30.488000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
[ 30.488000] input: PC Speaker as /class/input/input2
[ 30.524000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 30.992000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
[ 30.992000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 32.976000] lp: driver loaded but no devices found
[ 33.304000] ndiswrapper version 1.45 loaded (smp=yes)
[ 33.312000] usbcore: registered new interface driver ndiswrapper
[ 33.368000] ieee80211_crypt: registered algorithm 'NULL'
[ 33.376000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 33.376000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 33.440000] bcm43xx driver
[ 33.444000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 23
[ 33.556000] udev: renamed network interface eth0 to eth2
[ 33.652000] EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 33.652000] EXT3 FS on hda4, internal journal
[ 34.968000] audit(1209037783.992:3): type=1505 operation="profile_load" info="failed to unpack profile" name="/usr/lib/cups/backend/cups-pdf" pid=4388
[ 35.188000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 36.448000] ACPI: Video Device [PEG] (multi-head: yes rom: no post: no)
[ 36.508000] ACPI: Battery Slot [BAT1] (battery present)
[ 36.536000] No dock devices found.
[ 36.584000] input: Power Button (FF) as /class/input/input4
[ 36.584000] ACPI: Power Button (FF) [PWRF]
[ 36.596000] input: Lid Switch as /class/input/input5
[ 36.596000] ACPI: Lid Switch [LID]
[ 36.604000] input: Sleep Button (CM) as /class/input/input6
[ 36.604000] ACPI: Sleep Button (CM) [SLPB]
[ 36.604000] input: Power Button (CM) as /class/input/input7
[ 36.604000] ACPI: Power Button (CM) [PWRB]
[ 37.140000] ACPI: AC Adapter [AC0] (on-line)
[ 37.448000] powernow-k8: Found 1 Mobile AMD Athlon(tm) 64 Processor 4000+ processors (version 2.00.00)
[ 37.448000] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0xa
[ 37.448000] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 37.448000] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 37.448000] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 37.448000] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
[ 37.448000] powernow-k8: 5 : fid 0x8 (1600 MHz), vid 0x12
[ 37.448000] powernow-k8: 6 : fid 0x0 (800 MHz), vid 0x18
[ 37.552000] Clocksource tsc unstable (delta = 215101959 ns)
[ 39.888000] r8169: eth1: link down
[ 40.016000] NET: Registered protocol family 10
[ 40.016000] lo: Disabled Privacy Extensions
[ 40.016000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 40.016000] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 40.176000] Failure registering capabilities with primary security module.
[ 40.228000] SoftMAC: Open Authentication completed with 00:15:e9:0a:97:86
[ 40.236000] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 40.356000] ppdev: user-space parallel port driver
[ 40.600000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 40.600000] apm: overridden by ACPI.
[ 41.288000] Bluetooth: Core ver 2.11
[ 41.288000] NET: Registered protocol family 31
[ 41.288000] Bluetooth: HCI device and connection manager initialized
[ 41.288000] Bluetooth: HCI socket layer initialized
[ 41.304000] Bluetooth: L2CAP ver 2.8
[ 41.304000] Bluetooth: L2CAP socket layer initialized
[ 41.376000] Bluetooth: RFCOMM socket layer initialized
[ 41.376000] Bluetooth: RFCOMM TTY layer initialized
[ 41.376000] Bluetooth: RFCOMM ver 1.8
[ 43.760000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24
[ 46.112000] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 46.112000] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X40000
[ 46.112000] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000
[ 46.256000] [fglrx] interrupt source 20008000 successfully enabled
[ 46.256000] [fglrx] enable ID = 0x00000004
[ 46.256000] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 46.256000] [fglrx] interrupt source 10000000 successfully enabled
[ 46.256000] [fglrx] enable ID = 0x00000005
[ 46.256000] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 50.956000] eth2: no IPv6 routers present
[ 76.644000] NET: Registered protocol family 17
[ 90.780000] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 96.660000] eth2: no IPv6 routers present
[ 8392.680000] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 8392.860000] usb 4-1: configuration #1 chosen from 1 choice
[ 8393.060000] usbcore: registered new interface driver hiddev
[ 8393.092000] input: Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel as /class/input/input8
[ 8393.092000] input: USB HID v1.11 Mouse [Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel] on usb-0000:00:10.3-1
[ 8393.092000] usbcore: registered new interface driver usbhid
[ 8393.092000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 8394.120000] usb 5-8: new high speed USB device using ehci_hcd and address 3
[ 8394.260000] usb 5-8: configuration #1 chosen from 1 choice
[ 8394.260000] hub 5-8:1.0: USB hub found
[ 8394.260000] hub 5-8:1.0: 3 ports detected
[ 8394.564000] usb 5-8.2: new low speed USB device using ehci_hcd and address 4
[ 8394.660000] usb 5-8.2: configuration #1 chosen from 1 choice
[ 8394.744000] input: Apple, Inc Apple Keyboard as /class/input/input9
[ 8394.744000] input: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:10.4-8.2
[ 8394.836000] input: Apple, Inc Apple Keyboard as /class/input/input10
[ 8394.836000] input: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:10.4-8.2
[ 8394.856000] usbcore: registered new interface driver xpad
[ 8394.856000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[14634.720000] UDP: bad checksum. From 64.115.153.154:26992 to 192.168.0.199:10000 ulen 75