rendered paste bodyroot@alan:~# dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffd0000 - 000000001ffde000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffde000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 131024) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131024
[ 0.000000] HighMem 131024 -> 131024
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131024
[ 0.000000] On node 0 totalpages: 131024
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125937 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA970 checksum 0
[ 0.000000] ACPI: RSDP 000FA970, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 1FFD0000, 0034 (r1 A M I OEMRSDT 6000620 MSFT 97)
[ 0.000000] ACPI: FACP 1FFD0200, 0084 (r2 A M I OEMFACP 6000620 MSFT 97)
[ 0.000000] ACPI: DSDT 1FFD0430, 442C (r1 A0304 A0304001 1 INTL 2002026)
[ 0.000000] ACPI: FACS 1FFDE000, 0040
[ 0.000000] ACPI: APIC 1FFD0390, 005C (r1 A M I OEMAPIC 6000620 MSFT 97)
[ 0.000000] ACPI: MCFG 1FFD03F0, 003C (r1 A M I OEMMCFG 6000620 MSFT 97)
[ 0.000000] ACPI: OEMB 1FFDE040, 0046 (r1 A M I AMI_OEM 6000620 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] Built 1 zonelists. Total pages: 130001
[ 0.000000] Kernel command line: root=UUID=6da83030-b3c7-4171-acc6-d502648424c5 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 2200.335 MHz processor.
[ 19.161649] Console: colour VGA+ 80x25
[ 19.161925] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 19.162117] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 19.170719] Memory: 508044k/524096k available (2015k kernel code, 15424k reserved, 915k data, 364k init, 0k highmem)
[ 19.170728] virtual kernel memory layout:
[ 19.170729] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 19.170730] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 19.170731] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 19.170732] lowmem : 0xc0000000 - 0xdffd0000 ( 511 MB)
[ 19.170733] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 19.170735] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 19.170736] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 19.170738] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 19.170768] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 19.250718] Calibrating delay using timer specific routine.. 4402.74 BogoMIPS (lpj=8805489)
[ 19.250738] Security Framework v1.0.0 initialized
[ 19.250742] SELinux: Disabled at boot.
[ 19.250753] Mount-cache hash table entries: 512
[ 19.250843] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 19.250850] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 19.250852] CPU: L2 Cache: 512K (64 bytes/line)
[ 19.250854] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 19.250862] Compat vDSO mapped to ffffe000.
[ 19.250870] Checking 'hlt' instruction... OK.
[ 19.266806] SMP alternatives: switching to UP code
[ 19.266943] Freeing SMP alternatives: 11k freed
[ 19.267181] Early unpacking initramfs... done
[ 19.526935] ACPI: Core revision 20070126
[ 19.526991] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 19.528674] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
[ 19.528692] Total of 1 processors activated (4402.74 BogoMIPS).
[ 19.528808] ENABLING IO-APIC IRQs
[ 19.528982] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 19.674388] Brought up 1 CPUs
[ 19.674475] Booting paravirtualized kernel on bare hardware
[ 19.674559] Time: 19:29:50 Date: 03/22/108
[ 19.674576] NET: Registered protocol family 16
[ 19.674642] EISA bus registered
[ 19.674658] ACPI: bus type pci registered
[ 19.675315] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 19.675317] PCI: Using configuration type 1
[ 19.675319] Setting up standard PCI resources
[ 19.681775] ACPI: EC: Look up EC in DSDT
[ 19.685840] ACPI: Interpreter enabled
[ 19.685842] ACPI: (supports S0 S1 S3 S4 S5)
[ 19.685854] ACPI: Using IOAPIC for interrupt routing
[ 19.693935] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.693943] PCI: Probing PCI hardware (bus 00)
[ 19.695128] PCI: Transparent bridge - 0000:00:13.1
[ 19.695152] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.695275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 19.695351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
[ 19.695415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
[ 19.695480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 19.705750] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 19.705838] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 19.705925] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 19.706011] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 19.706097] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 19.706184] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 19.706270] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 19.706375] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 19.706441] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.706450] pnp: PnP ACPI init
[ 19.706456] ACPI: bus type pnp registered
[ 19.710901] pnp: PnP ACPI: found 15 devices
[ 19.710903] ACPI: ACPI bus type pnp unregistered
[ 19.710906] PnPBIOS: Disabled by ACPI PNP
[ 19.710946] PCI: Using ACPI for IRQ routing
[ 19.710948] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.724037] NET: Registered protocol family 8
[ 19.724039] NET: Registered protocol family 20
[ 19.724089] pnp: 00:07: ioport range 0xc00-0xc0f has been reserved
[ 19.724091] pnp: 00:07: ioport range 0xd00-0xd0f has been reserved
[ 19.724093] pnp: 00:07: ioport range 0xa20-0xa2f has been reserved
[ 19.724096] pnp: 00:07: ioport range 0xa30-0xa3f has been reserved
[ 19.724100] pnp: 00:08: iomem range 0xf0000000-0xf0000fff has been reserved
[ 19.724103] pnp: 00:08: iomem range 0xff380000-0xff3fffff has been reserved
[ 19.724105] pnp: 00:08: iomem range 0xff780000-0xff7fffff could not be reserved
[ 19.724108] pnp: 00:08: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 19.724112] pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 19.724114] pnp: 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 19.724119] pnp: 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
[ 19.724123] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 19.724125] pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 19.724128] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 19.724130] pnp: 00:0e: iomem range 0x100000-0x1fffffff could not be reserved
[ 19.726315] Time: tsc clocksource has been installed.
[ 19.754313] PCI: Bridge: 0000:00:01.0
[ 19.754315] IO window: disabled.
[ 19.754319] MEM window: fc900000-fe9fffff
[ 19.754322] PREFETCH window: bbf00000-dbefffff
[ 19.754326] PCI: Bridge: 0000:02:00.0
[ 19.754327] IO window: disabled.
[ 19.754330] MEM window: disabled.
[ 19.754332] PREFETCH window: disabled.
[ 19.754336] PCI: Bridge: 0000:02:00.1
[ 19.754337] IO window: disabled.
[ 19.754340] MEM window: disabled.
[ 19.754342] PREFETCH window: disabled.
[ 19.754345] PCI: Bridge: 0000:00:13.0
[ 19.754347] IO window: disabled.
[ 19.754350] MEM window: fea00000-feafffff
[ 19.754353] PREFETCH window: disabled.
[ 19.754356] PCI: Bridge: 0000:00:13.1
[ 19.754358] IO window: c000-cfff
[ 19.754361] MEM window: disabled.
[ 19.754364] PREFETCH window: disabled.
[ 19.754378] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.754383] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 19.754394] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 19.754404] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 19.754410] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 19.754421] NET: Registered protocol family 2
[ 19.794300] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 19.794340] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 19.794521] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 19.794640] TCP: Hash tables configured (established 16384 bind 16384)
[ 19.794642] TCP reno registered
[ 19.806348] checking if image is initramfs... it is
[ 20.257859] Switched to high resolution mode on CPU 0
[ 20.318977] Freeing initrd memory: 7051k freed
[ 20.319304] audit: initializing netlink socket (disabled)
[ 20.319316] audit(1208892589.952:1): initialized
[ 20.320588] VFS: Disk quotas dquot_6.5.1
[ 20.320624] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.320695] io scheduler noop registered
[ 20.320697] io scheduler anticipatory registered
[ 20.320698] io scheduler deadline registered
[ 20.320710] io scheduler cfq registered (default)
[ 20.320722] PCI: VIA PCI bridge detected. Disabling DAC.
[ 20.320789] Boot video device is 0000:01:00.0
[ 20.320882] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 20.320909] assign_interrupt_mode Found MSI capability
[ 20.320912] Allocate Port Service[0000:02:00.0:pcie00]
[ 20.320971] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 20.320997] assign_interrupt_mode Found MSI capability
[ 20.320999] Allocate Port Service[0000:02:00.1:pcie00]
[ 20.321094] isapnp: Scanning for PnP cards...
[ 20.674631] isapnp: No Plug & Play device found
[ 20.692852] Real Time Clock Driver v1.12ac
[ 20.692941] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.693030] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.693578] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.694069] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.694209] input: Macintosh mouse button emulation as /class/input/input0
[ 20.694261] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 20.694586] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.694590] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.694701] mice: PS/2 mouse device common for all mice
[ 20.694788] EISA: Probing bus 0 at eisa.0
[ 20.694827] EISA: Detected 0 cards.
[ 20.694969] TCP cubic registered
[ 20.694983] NET: Registered protocol family 1
[ 20.695001] Using IPI No-Shortcut mode
[ 20.695161] Magic number: 4:582:496
[ 20.695620] Freeing unused kernel memory: 364k freed
[ 20.761467] input: AT Translated Set 2 keyboard as /class/input/input1
[ 21.858542] AppArmor: AppArmor initialized<5>audit(1208892591.452:2): type=1505 info="AppArmor initialized" pid=1228
[ 21.865036] fuse init (API version 7.8)
[ 21.868481] Failure registering capabilities with primary security module.
[ 21.883250] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 21.883261] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 22.330639] SCSI subsystem initialized
[ 22.334193] libata version 2.21 loaded.
[ 22.336800] ahci 0000:00:0f.0: version 2.2
[ 22.336824] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 16
[ 22.341695] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 22.341699] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 22.351768] usbcore: registered new interface driver usbfs
[ 22.351789] usbcore: registered new interface driver hub
[ 22.351806] usbcore: registered new device driver usb
[ 22.352427] USB Universal Host Controller Interface driver v3.0
[ 22.433777] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 22.532426] Floppy drive(s): fd0 is 1.44M
[ 22.603901] FDC 0 is a post-1991 82077
[ 23.339153] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 23.339158] ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 23.339542] scsi0 : ahci
[ 23.339837] scsi1 : ahci
[ 23.339941] scsi2 : ahci
[ 23.340050] scsi3 : ahci
[ 23.340374] ata1: SATA max UDMA/133 cmd 0xe083ad00 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 23.340378] ata2: SATA max UDMA/133 cmd 0xe083ad80 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 23.340381] ata3: SATA max UDMA/133 cmd 0xe083ae00 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 23.340384] ata4: SATA max UDMA/133 cmd 0xe083ae80 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 23.822710] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 23.865915] ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
[ 23.865918] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 23.924168] ata1.00: configured for UDMA/133
[ 24.234346] ata2: SATA link down (SStatus 0 SControl 300)
[ 24.546068] ata3: SATA link down (SStatus 0 SControl 300)
[ 24.857792] ata4: SATA link down (SStatus 0 SControl 300)
[ 24.857879] scsi 0:0:0:0: Direct-Access ATA ST3160811AS 3.AA PQ: 0 ANSI: 5
[ 24.858229] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 24.858250] VP_IDE: chipset revision 7
[ 24.858252] VP_IDE: not 100% native mode: will probe irqs later
[ 24.858261] VP_IDE: VIA vt8251 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 24.858268] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[ 24.858278] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
[ 24.858285] Probing IDE interface ide0...
[ 24.873882] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 24.873894] sd 0:0:0:0: [sda] Write Protect is off
[ 24.873896] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.873908] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.873955] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 24.873962] sd 0:0:0:0: [sda] Write Protect is off
[ 24.873964] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.873975] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.873979] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[ 24.925113] sd 0:0:0:0: [sda] Attached SCSI disk
[ 24.929353] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 25.263947] Attempting manual resume
[ 25.263950] swsusp: Resume From Partition 8:7
[ 25.263952] PM: Checking swsusp image.
[ 25.264091] PM: Resume from disk failed.
[ 25.279283] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 25.279286] EXT3-fs: write access will be enabled during recovery.
[ 25.659834] kjournald starting. Commit interval 5 seconds
[ 25.659848] EXT3-fs: recovery complete.
[ 25.660000] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.721125] hda: HL-DT-ST DVDRAM GSA-H12N, ATAPI CD/DVD-ROM drive
[ 26.057777] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 26.061246] Probing IDE interface ide1...
[ 26.628433] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 17
[ 26.628446] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 26.628698] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 26.628723] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e080
[ 26.628833] usb usb1: configuration #1 chosen from 1 choice
[ 26.628853] hub 1-0:1.0: USB hub found
[ 26.628859] hub 1-0:1.0: 2 ports detected
[ 26.732211] ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 18
[ 26.732219] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 26.732236] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 26.732257] uhci_hcd 0000:00:10.1: irq 18, io base 0x0000e000
[ 26.732333] usb usb2: configuration #1 chosen from 1 choice
[ 26.732351] hub 2-0:1.0: USB hub found
[ 26.732357] hub 2-0:1.0: 2 ports detected
[ 26.836141] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 16
[ 26.836152] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 26.836170] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 26.836191] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000dc00
[ 26.836281] usb usb3: configuration #1 chosen from 1 choice
[ 26.836302] hub 3-0:1.0: USB hub found
[ 26.836311] hub 3-0:1.0: 2 ports detected
[ 26.940036] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 19
[ 26.940044] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 26.940062] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 26.940084] uhci_hcd 0000:00:10.3: irq 19, io base 0x0000d880
[ 26.940179] usb usb4: configuration #1 chosen from 1 choice
[ 26.940200] hub 4-0:1.0: USB hub found
[ 26.940207] hub 4-0:1.0: 2 ports detected
[ 27.044096] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 18
[ 27.044105] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 27.044127] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 27.044156] ehci_hcd 0000:00:10.4: debug port 1
[ 27.044163] ehci_hcd 0000:00:10.4: irq 18, io mem 0xfebff800
[ 27.099820] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 27.099831] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 27.099934] usb usb5: configuration #1 chosen from 1 choice
[ 27.099954] hub 5-0:1.0: USB hub found
[ 27.099960] hub 5-0:1.0: 8 ports detected
[ 27.203872] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 27.203955] eth0: VIA Rhine II at 0x1d400, 00:17:31:df:bf:e2, IRQ 19.
[ 27.204667] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1.
[ 28.482596] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 28.679908] usb 1-2: configuration #1 chosen from 1 choice
[ 31.591422] Linux agpgart interface v0.102 (c) Dave Jones
[ 31.613170] agpgart: Detected AGP bridge 0
[ 31.615229] agpgart: AGP aperture is 64M @ 0xdc000000
[ 31.910213] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.948386] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.471629] input: PC Speaker as /class/input/input2
[ 32.594258] nvidia: module license 'NVIDIA' taints kernel.
[ 32.906765] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 32.906951] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 33.309900] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
[ 33.309908] Uniform CD-ROM driver Revision: 3.20
[ 33.345381] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 33.381791] parport_pc 00:06: reported by Plug and Play ACPI
[ 33.381835] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 33.577740] Linux video capture interface: v2.00
[ 33.633467] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 33.633487] PCI: Setting latency timer of device 0000:02:01.0 to 64
[ 33.657686] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.07
[ 33.657975] usb 1-2: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x301B)
[ 33.749060] usb 1-2: PB-0330 image sensor detected
[ 33.953972] ACPI: PCI Interrupt 0000:05:0d.0[A] -> GSI 18 (level, low) -> IRQ 22
[ 34.155677] usb 1-2: Initialization succeeded
[ 34.155735] usb 1-2: V4L2 device registered as /dev/video0
[ 34.155755] usbcore: registered new interface driver zc0301
[ 34.180948] usbcore: registered new interface driver gspca
[ 34.180952] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 35.300558] lp0: using parport0 (interrupt-driven).
[ 35.333069] Adding 1485972k swap on /dev/sda7. Priority:-1 extents:1 across:1485972k
[ 35.592053] EXT3 FS on sda3, internal journal
[ 36.166989] kjournald starting. Commit interval 5 seconds
[ 36.167085] EXT3 FS on sda6, internal journal
[ 36.167089] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.717083] No dock devices found.
[ 38.780091] input: Power Button (FF) as /class/input/input4
[ 38.783517] ACPI: Power Button (FF) [PWRF]
[ 38.816287] input: Sleep Button (CM) as /class/input/input5
[ 38.819719] ACPI: Sleep Button (CM) [SLPB]
[ 38.851988] input: Power Button (CM) as /class/input/input6
[ 38.855393] ACPI: Power Button (CM) [PWRB]
[ 39.054558] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (version 2.00.00)
[ 39.058872] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 39.878799] Failure registering capabilities with primary security module.
[ 39.991897] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 40.075489] ppdev: user-space parallel port driver
[ 40.202989] audit(1208903410.497:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5041 profile="/usr/sbin/cupsd"
[ 40.307349] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 40.307354] apm: overridden by ACPI.
[ 40.903080] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 40.955224] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 40.967252] NFSD: starting 90-second grace period
[ 42.864378] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 42.864392] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 42.864449] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 46.270023] NET: Registered protocol family 17
[ 48.085687] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 51.930749] NET: Registered protocol family 10
[ 51.930854] lo: Disabled Privacy Extensions
[ 62.084942] eth0: no IPv6 routers present
[ 73.768830] UDF-fs: No VRS found
[ 73.804933] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 73.836810] ISOFS: changing to secondary root
Lspci
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffd0000 - 000000001ffde000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffde000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 131024) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131024
[ 0.000000] HighMem 131024 -> 131024
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131024
[ 0.000000] On node 0 totalpages: 131024
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125937 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA970 checksum 0
[ 0.000000] ACPI: RSDP 000FA970, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 1FFD0000, 0034 (r1 A M I OEMRSDT 6000620 MSFT 97)
[ 0.000000] ACPI: FACP 1FFD0200, 0084 (r2 A M I OEMFACP 6000620 MSFT 97)
[ 0.000000] ACPI: DSDT 1FFD0430, 442C (r1 A0304 A0304001 1 INTL 2002026)
[ 0.000000] ACPI: FACS 1FFDE000, 0040
[ 0.000000] ACPI: APIC 1FFD0390, 005C (r1 A M I OEMAPIC 6000620 MSFT 97)
[ 0.000000] ACPI: MCFG 1FFD03F0, 003C (r1 A M I OEMMCFG 6000620 MSFT 97)
[ 0.000000] ACPI: OEMB 1FFDE040, 0046 (r1 A M I AMI_OEM 6000620 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] Built 1 zonelists. Total pages: 130001
[ 0.000000] Kernel command line: root=UUID=6da83030-b3c7-4171-acc6-d502648424c5 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 2200.335 MHz processor.
[ 19.161649] Console: colour VGA+ 80x25
[ 19.161925] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 19.162117] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 19.170719] Memory: 508044k/524096k available (2015k kernel code, 15424k reserved, 915k data, 364k init, 0k highmem)
[ 19.170728] virtual kernel memory layout:
[ 19.170729] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 19.170730] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 19.170731] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 19.170732] lowmem : 0xc0000000 - 0xdffd0000 ( 511 MB)
[ 19.170733] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 19.170735] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 19.170736] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 19.170738] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 19.170768] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 19.250718] Calibrating delay using timer specific routine.. 4402.74 BogoMIPS (lpj=8805489)
[ 19.250738] Security Framework v1.0.0 initialized
[ 19.250742] SELinux: Disabled at boot.
[ 19.250753] Mount-cache hash table entries: 512
[ 19.250843] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 19.250850] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 19.250852] CPU: L2 Cache: 512K (64 bytes/line)
[ 19.250854] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 19.250862] Compat vDSO mapped to ffffe000.
[ 19.250870] Checking 'hlt' instruction... OK.
[ 19.266806] SMP alternatives: switching to UP code
[ 19.266943] Freeing SMP alternatives: 11k freed
[ 19.267181] Early unpacking initramfs... done
[ 19.526935] ACPI: Core revision 20070126
[ 19.526991] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 19.528674] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
[ 19.528692] Total of 1 processors activated (4402.74 BogoMIPS).
[ 19.528808] ENABLING IO-APIC IRQs
[ 19.528982] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 19.674388] Brought up 1 CPUs
[ 19.674475] Booting paravirtualized kernel on bare hardware
[ 19.674559] Time: 19:29:50 Date: 03/22/108
[ 19.674576] NET: Registered protocol family 16
[ 19.674642] EISA bus registered
[ 19.674658] ACPI: bus type pci registered
[ 19.675315] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 19.675317] PCI: Using configuration type 1
[ 19.675319] Setting up standard PCI resources
[ 19.681775] ACPI: EC: Look up EC in DSDT
[ 19.685840] ACPI: Interpreter enabled
[ 19.685842] ACPI: (supports S0 S1 S3 S4 S5)
[ 19.685854] ACPI: Using IOAPIC for interrupt routing
[ 19.693935] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.693943] PCI: Probing PCI hardware (bus 00)
[ 19.695128] PCI: Transparent bridge - 0000:00:13.1
[ 19.695152] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.695275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 19.695351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
[ 19.695415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
[ 19.695480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 19.705750] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 19.705838] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 19.705925] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 19.706011] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 19.706097] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 19.706184] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 19.706270] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 19.706375] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 19.706441] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.706450] pnp: PnP ACPI init
[ 19.706456] ACPI: bus type pnp registered
[ 19.710901] pnp: PnP ACPI: found 15 devices
[ 19.710903] ACPI: ACPI bus type pnp unregistered
[ 19.710906] PnPBIOS: Disabled by ACPI PNP
[ 19.710946] PCI: Using ACPI for IRQ routing
[ 19.710948] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.724037] NET: Registered protocol family 8
[ 19.724039] NET: Registered protocol family 20
[ 19.724089] pnp: 00:07: ioport range 0xc00-0xc0f has been reserved
[ 19.724091] pnp: 00:07: ioport range 0xd00-0xd0f has been reserved
[ 19.724093] pnp: 00:07: ioport range 0xa20-0xa2f has been reserved
[ 19.724096] pnp: 00:07: ioport range 0xa30-0xa3f has been reserved
[ 19.724100] pnp: 00:08: iomem range 0xf0000000-0xf0000fff has been reserved
[ 19.724103] pnp: 00:08: iomem range 0xff380000-0xff3fffff has been reserved
[ 19.724105] pnp: 00:08: iomem range 0xff780000-0xff7fffff could not be reserved
[ 19.724108] pnp: 00:08: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 19.724112] pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 19.724114] pnp: 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 19.724119] pnp: 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
[ 19.724123] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 19.724125] pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 19.724128] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 19.724130] pnp: 00:0e: iomem range 0x100000-0x1fffffff could not be reserved
[ 19.726315] Time: tsc clocksource has been installed.
[ 19.754313] PCI: Bridge: 0000:00:01.0
[ 19.754315] IO window: disabled.
[ 19.754319] MEM window: fc900000-fe9fffff
[ 19.754322] PREFETCH window: bbf00000-dbefffff
[ 19.754326] PCI: Bridge: 0000:02:00.0
[ 19.754327] IO window: disabled.
[ 19.754330] MEM window: disabled.
[ 19.754332] PREFETCH window: disabled.
[ 19.754336] PCI: Bridge: 0000:02:00.1
[ 19.754337] IO window: disabled.
[ 19.754340] MEM window: disabled.
[ 19.754342] PREFETCH window: disabled.
[ 19.754345] PCI: Bridge: 0000:00:13.0
[ 19.754347] IO window: disabled.
[ 19.754350] MEM window: fea00000-feafffff
[ 19.754353] PREFETCH window: disabled.
[ 19.754356] PCI: Bridge: 0000:00:13.1
[ 19.754358] IO window: c000-cfff
[ 19.754361] MEM window: disabled.
[ 19.754364] PREFETCH window: disabled.
[ 19.754378] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.754383] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 19.754394] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 19.754404] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 19.754410] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 19.754421] NET: Registered protocol family 2
[ 19.794300] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 19.794340] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 19.794521] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 19.794640] TCP: Hash tables configured (established 16384 bind 16384)
[ 19.794642] TCP reno registered
[ 19.806348] checking if image is initramfs... it is
[ 20.257859] Switched to high resolution mode on CPU 0
[ 20.318977] Freeing initrd memory: 7051k freed
[ 20.319304] audit: initializing netlink socket (disabled)
[ 20.319316] audit(1208892589.952:1): initialized
[ 20.320588] VFS: Disk quotas dquot_6.5.1
[ 20.320624] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.320695] io scheduler noop registered
[ 20.320697] io scheduler anticipatory registered
[ 20.320698] io scheduler deadline registered
[ 20.320710] io scheduler cfq registered (default)
[ 20.320722] PCI: VIA PCI bridge detected. Disabling DAC.
[ 20.320789] Boot video device is 0000:01:00.0
[ 20.320882] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 20.320909] assign_interrupt_mode Found MSI capability
[ 20.320912] Allocate Port Service[0000:02:00.0:pcie00]
[ 20.320971] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 20.320997] assign_interrupt_mode Found MSI capability
[ 20.320999] Allocate Port Service[0000:02:00.1:pcie00]
[ 20.321094] isapnp: Scanning for PnP cards...
[ 20.674631] isapnp: No Plug & Play device found
[ 20.692852] Real Time Clock Driver v1.12ac
[ 20.692941] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.693030] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.693578] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.694069] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.694209] input: Macintosh mouse button emulation as /class/input/input0
[ 20.694261] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 20.694586] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.694590] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.694701] mice: PS/2 mouse device common for all mice
[ 20.694788] EISA: Probing bus 0 at eisa.0
[ 20.694827] EISA: Detected 0 cards.
[ 20.694969] TCP cubic registered
[ 20.694983] NET: Registered protocol family 1
[ 20.695001] Using IPI No-Shortcut mode
[ 20.695161] Magic number: 4:582:496
[ 20.695620] Freeing unused kernel memory: 364k freed
[ 20.761467] input: AT Translated Set 2 keyboard as /class/input/input1
[ 21.858542] AppArmor: AppArmor initialized<5>audit(1208892591.452:2): type=1505 info="AppArmor initialized" pid=1228
[ 21.865036] fuse init (API version 7.8)
[ 21.868481] Failure registering capabilities with primary security module.
[ 21.883250] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 21.883261] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 22.330639] SCSI subsystem initialized
[ 22.334193] libata version 2.21 loaded.
[ 22.336800] ahci 0000:00:0f.0: version 2.2
[ 22.336824] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 16
[ 22.341695] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 22.341699] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 22.351768] usbcore: registered new interface driver usbfs
[ 22.351789] usbcore: registered new interface driver hub
[ 22.351806] usbcore: registered new device driver usb
[ 22.352427] USB Universal Host Controller Interface driver v3.0
[ 22.433777] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 22.532426] Floppy drive(s): fd0 is 1.44M
[ 22.603901] FDC 0 is a post-1991 82077
[ 23.339153] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 23.339158] ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 23.339542] scsi0 : ahci
[ 23.339837] scsi1 : ahci
[ 23.339941] scsi2 : ahci
[ 23.340050] scsi3 : ahci
[ 23.340374] ata1: SATA max UDMA/133 cmd 0xe083ad00 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 23.340378] ata2: SATA max UDMA/133 cmd 0xe083ad80 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 23.340381] ata3: SATA max UDMA/133 cmd 0xe083ae00 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 23.340384] ata4: SATA max UDMA/133 cmd 0xe083ae80 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 23.822710] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 23.865915] ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
[ 23.865918] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 23.924168] ata1.00: configured for UDMA/133
[ 24.234346] ata2: SATA link down (SStatus 0 SControl 300)
[ 24.546068] ata3: SATA link down (SStatus 0 SControl 300)
[ 24.857792] ata4: SATA link down (SStatus 0 SControl 300)
[ 24.857879] scsi 0:0:0:0: Direct-Access ATA ST3160811AS 3.AA PQ: 0 ANSI: 5
[ 24.858229] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 24.858250] VP_IDE: chipset revision 7
[ 24.858252] VP_IDE: not 100% native mode: will probe irqs later
[ 24.858261] VP_IDE: VIA vt8251 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 24.858268] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[ 24.858278] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
[ 24.858285] Probing IDE interface ide0...
[ 24.873882] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 24.873894] sd 0:0:0:0: [sda] Write Protect is off
[ 24.873896] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.873908] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.873955] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 24.873962] sd 0:0:0:0: [sda] Write Protect is off
[ 24.873964] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.873975] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.873979] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[ 24.925113] sd 0:0:0:0: [sda] Attached SCSI disk
[ 24.929353] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 25.263947] Attempting manual resume
[ 25.263950] swsusp: Resume From Partition 8:7
[ 25.263952] PM: Checking swsusp image.
[ 25.264091] PM: Resume from disk failed.
[ 25.279283] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 25.279286] EXT3-fs: write access will be enabled during recovery.
[ 25.659834] kjournald starting. Commit interval 5 seconds
[ 25.659848] EXT3-fs: recovery complete.
[ 25.660000] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.721125] hda: HL-DT-ST DVDRAM GSA-H12N, ATAPI CD/DVD-ROM drive
[ 26.057777] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 26.061246] Probing IDE interface ide1...
[ 26.628433] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 17
[ 26.628446] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 26.628698] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 26.628723] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e080
[ 26.628833] usb usb1: configuration #1 chosen from 1 choice
[ 26.628853] hub 1-0:1.0: USB hub found
[ 26.628859] hub 1-0:1.0: 2 ports detected
[ 26.732211] ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 18
[ 26.732219] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 26.732236] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 26.732257] uhci_hcd 0000:00:10.1: irq 18, io base 0x0000e000
[ 26.732333] usb usb2: configuration #1 chosen from 1 choice
[ 26.732351] hub 2-0:1.0: USB hub found
[ 26.732357] hub 2-0:1.0: 2 ports detected
[ 26.836141] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 16
[ 26.836152] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 26.836170] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 26.836191] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000dc00
[ 26.836281] usb usb3: configuration #1 chosen from 1 choice
[ 26.836302] hub 3-0:1.0: USB hub found
[ 26.836311] hub 3-0:1.0: 2 ports detected
[ 26.940036] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 19
[ 26.940044] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 26.940062] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 26.940084] uhci_hcd 0000:00:10.3: irq 19, io base 0x0000d880
[ 26.940179] usb usb4: configuration #1 chosen from 1 choice
[ 26.940200] hub 4-0:1.0: USB hub found
[ 26.940207] hub 4-0:1.0: 2 ports detected
[ 27.044096] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 18
[ 27.044105] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 27.044127] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 27.044156] ehci_hcd 0000:00:10.4: debug port 1
[ 27.044163] ehci_hcd 0000:00:10.4: irq 18, io mem 0xfebff800
[ 27.099820] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 27.099831] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 27.099934] usb usb5: configuration #1 chosen from 1 choice
[ 27.099954] hub 5-0:1.0: USB hub found
[ 27.099960] hub 5-0:1.0: 8 ports detected
[ 27.203872] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 27.203955] eth0: VIA Rhine II at 0x1d400, 00:17:31:df:bf:e2, IRQ 19.
[ 27.204667] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1.
[ 28.482596] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 28.679908] usb 1-2: configuration #1 chosen from 1 choice
[ 31.591422] Linux agpgart interface v0.102 (c) Dave Jones
[ 31.613170] agpgart: Detected AGP bridge 0
[ 31.615229] agpgart: AGP aperture is 64M @ 0xdc000000
[ 31.910213] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.948386] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.471629] input: PC Speaker as /class/input/input2
[ 32.594258] nvidia: module license 'NVIDIA' taints kernel.
[ 32.906765] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 32.906951] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 33.309900] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
[ 33.309908] Uniform CD-ROM driver Revision: 3.20
[ 33.345381] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 33.381791] parport_pc 00:06: reported by Plug and Play ACPI
[ 33.381835] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 33.577740] Linux video capture interface: v2.00
[ 33.633467] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 33.633487] PCI: Setting latency timer of device 0000:02:01.0 to 64
[ 33.657686] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.07
[ 33.657975] usb 1-2: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x301B)
[ 33.749060] usb 1-2: PB-0330 image sensor detected
[ 33.953972] ACPI: PCI Interrupt 0000:05:0d.0[A] -> GSI 18 (level, low) -> IRQ 22
[ 34.155677] usb 1-2: Initialization succeeded
[ 34.155735] usb 1-2: V4L2 device registered as /dev/video0
[ 34.155755] usbcore: registered new interface driver zc0301
[ 34.180948] usbcore: registered new interface driver gspca
[ 34.180952] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 35.300558] lp0: using parport0 (interrupt-driven).
[ 35.333069] Adding 1485972k swap on /dev/sda7. Priority:-1 extents:1 across:1485972k
[ 35.592053] EXT3 FS on sda3, internal journal
[ 36.166989] kjournald starting. Commit interval 5 seconds
[ 36.167085] EXT3 FS on sda6, internal journal
[ 36.167089] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.717083] No dock devices found.
[ 38.780091] input: Power Button (FF) as /class/input/input4
[ 38.783517] ACPI: Power Button (FF) [PWRF]
[ 38.816287] input: Sleep Button (CM) as /class/input/input5
[ 38.819719] ACPI: Sleep Button (CM) [SLPB]
[ 38.851988] input: Power Button (CM) as /class/input/input6
[ 38.855393] ACPI: Power Button (CM) [PWRB]
[ 39.054558] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (version 2.00.00)
[ 39.058872] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 39.878799] Failure registering capabilities with primary security module.
[ 39.991897] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 40.075489] ppdev: user-space parallel port driver
[ 40.202989] audit(1208903410.497:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5041 profile="/usr/sbin/cupsd"
[ 40.307349] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 40.307354] apm: overridden by ACPI.
[ 40.903080] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 40.955224] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 40.967252] NFSD: starting 90-second grace period
[ 42.864378] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 42.864392] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 42.864449] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 46.270023] NET: Registered protocol family 17
[ 48.085687] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 51.930749] NET: Registered protocol family 10
[ 51.930854] lo: Disabled Privacy Extensions
[ 62.084942] eth0: no IPv6 routers present
[ 73.768830] UDF-fs: No VRS found
[ 73.804933] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 73.836810] ISOFS: changing to secondary root
root@alan:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0f.0 IDE interface: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5500] (rev a1)
02:00.0 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
02:00.1 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
02:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller
05:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)