I added this/* setup serial port D2 Sean Mathews */ s3c2410_gpio_cfgpin(S3C2410_GPH6, S3C2410_GPH6_TXD2); s3c2410_gpio_pullup(S3C2410_GPH6, 1); s3c2410_gpio_cfgpin(S3C2410_GPH7, S3C2410_GPH7_RXD2); s3c2410_gpio_pullup(S3C2410_GPH7, 1); s3c2410_gpio_setpin(S3C2410_GPH6, 1); s3c2410_gpio_setpin(S3C2410_GPH7, 1);static void __init tct_hammer_init(void){ s3c2410_gpio_cfgpin(S3C2410_GPF0, S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPF0, 1); s3c2410_gpio_cfgpin(S3C2410_GPC12, S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPC12, 1);/*uncomment these these to enable the second serial port *//* s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0); s3c2410_gpio_pullup(S3C2410_GPH2, 1); s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0); s3c2410_gpio_pullup(S3C2410_GPH3, 1);*/#ifdef CONFIG_FB_S3C2410 s3c24xx_fb_set_platdata(&tct_hammer_lcd_info);#endif platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));}