rendered paste bodyic@ic-desktop:~$ sudo dmesg
[sudo] password for ic:
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037eb0000 (usable)
[ 0.000000] BIOS-e820: 0000000037eb0000 - 0000000037ee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037ee3000 - 0000000037ef0000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037ef0000 - 0000000037f00000 (reserved)
[ 0.000000] BIOS-e820: 0000000038000000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 894MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5830
[ 0.000000] Entering add_active_range(0, 0, 229040) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229040
[ 0.000000] HighMem 229040 -> 229040
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 229040
[ 0.000000] On node 0 totalpages: 229040
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1757 pages used for memmap
[ 0.000000] Normal zone: 223187 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7430 checksum 0
[ 0.000000] ACPI: RSDP 000F7430, 0024 (r2 Nvidia)
[ 0.000000] ACPI: XSDT 37EE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 37EEB080, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 37EE3280, 7DB0 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000)
[ 0.000000] ACPI: FACS 37EB0000, 0040
[ 0.000000] ACPI: TCPA 37EEB280, 0032 (r1 HTC HTCACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: HPET 37EEB300, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98)
[ 0.000000] ACPI: MCFG 37EEB380, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 37EEB1C0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 227251
[ 0.000000] Kernel command line: root=UUID=59f0cdaf-d30d-4cf2-98c5-d84ac577e1d5 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2004.196 MHz processor.
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 896652k/916160k available (2015k kernel code, 18940k reserved, 915k data, 364k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7eb0000 ( 894 MB)
[ 0.000000] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 0.000000] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 0.000000] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 0.000000] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 0.000000] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[ 0.000000] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.080000] Calibrating delay using timer specific routine.. 4011.71 BogoMIPS (lpj=8023429)
[ 0.080000] Security Framework v1.0.0 initialized
[ 0.080000] SELinux: Disabled at boot.
[ 0.080000] Mount-cache hash table entries: 512
[ 0.080000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[ 0.080000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.080000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.080000] CPU 0(2) -> Core 0
[ 0.080000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[ 0.080000] Compat vDSO mapped to ffffe000.
[ 0.080000] Checking 'hlt' instruction... OK.
[ 0.096000] SMP alternatives: switching to UP code
[ 0.096000] Early unpacking initramfs... done
[ 0.380000] ACPI: Core revision 20070126
[ 0.380000] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 0.384000] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.384000] SMP alternatives: switching to SMP code
[ 0.384000] Booting processor 1/1 eip 3000
[ 0.392000] Initializing CPU#1
[ 0.476000] Calibrating delay using timer specific routine.. 4008.38 BogoMIPS (lpj=8016776)
[ 0.476000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[ 0.476000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.476000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.476000] CPU 1(2) -> Core 1
[ 0.476000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[ 0.476000] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.476000] Total of 2 processors activated (8020.10 BogoMIPS).
[ 0.476000] ENABLING IO-APIC IRQs
[ 0.476000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.520000] Brought up 2 CPUs
[ 0.532000] migration_cost=4000
[ 0.532000] Booting paravirtualized kernel on bare hardware
[ 0.532000] Time: 16:27:18 Date: 03/16/108
[ 0.532000] NET: Registered protocol family 16
[ 0.532000] EISA bus registered
[ 0.532000] ACPI: bus type pci registered
[ 0.540000] PCI: PCI BIOS revision 3.00 entry at 0xf21e0, last bus=4
[ 0.540000] PCI: Using configuration type 1
[ 0.540000] Setting up standard PCI resources
[ 0.544000] ACPI: EC: Look up EC in DSDT
[ 0.552000] ACPI: Interpreter enabled
[ 0.552000] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.552000] ACPI: Using IOAPIC for interrupt routing
[ 0.560000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.560000] PCI: Probing PCI hardware (bus 00)
[ 0.564000] PCI: Transparent bridge - 0000:00:10.0
[ 0.564000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.564000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.640000] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.640000] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.640000] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.640000] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.640000] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.640000] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.640000] ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
[ 0.640000] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.640000] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.640000] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[ 0.644000] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 0.644000] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 0.644000] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[ 0.644000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.644000] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.644000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.648000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.648000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.648000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.648000] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.648000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.648000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.648000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.648000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.648000] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.648000] pnp: PnP ACPI init
[ 0.648000] ACPI: bus type pnp registered
[ 0.656000] pnp: PnP ACPI: found 12 devices
[ 0.656000] ACPI: ACPI bus type pnp unregistered
[ 0.656000] PnPBIOS: Disabled by ACPI PNP
[ 0.656000] PCI: Using ACPI for IRQ routing
[ 0.656000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.732000] NET: Registered protocol family 8
[ 0.732000] NET: Registered protocol family 20
[ 0.732000] pnp: 00:01: ioport range 0x4000-0x407f has been reserved
[ 0.732000] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
[ 0.732000] pnp: 00:01: ioport range 0x4400-0x447f has been reserved
[ 0.732000] pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
[ 0.732000] pnp: 00:01: ioport range 0x4800-0x487f has been reserved
[ 0.732000] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
[ 0.732000] pnp: 00:01: ioport range 0x2000-0x207f has been reserved
[ 0.732000] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
[ 0.732000] pnp: 00:01: iomem range 0x38000000-0x3fffffff could not be reserved
[ 0.732000] pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.732000] pnp: 00:0b: iomem range 0xcec00-0xcffff has been reserved
[ 0.732000] pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.732000] pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.732000] pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[ 0.736000] Time: hpet clocksource has been installed.
[ 0.736000] Switched to high resolution mode on CPU 0
[ 0.736000] Switched to high resolution mode on CPU 1
[ 0.764000] PCI: Bridge: 0000:00:02.0
[ 0.764000] IO window: a000-afff
[ 0.764000] MEM window: fd800000-fd8fffff
[ 0.764000] PREFETCH window: fd700000-fd7fffff
[ 0.764000] PCI: Bridge: 0000:00:03.0
[ 0.764000] IO window: 8000-8fff
[ 0.764000] MEM window: fde00000-fdefffff
[ 0.764000] PREFETCH window: fdd00000-fddfffff
[ 0.764000] PCI: Bridge: 0000:00:04.0
[ 0.764000] IO window: b000-bfff
[ 0.764000] MEM window: fdc00000-fdcfffff
[ 0.764000] PREFETCH window: fd900000-fd9fffff
[ 0.764000] PCI: Bridge: 0000:00:10.0
[ 0.764000] IO window: 9000-9fff
[ 0.764000] MEM window: fdb00000-fdbfffff
[ 0.764000] PREFETCH window: fda00000-fdafffff
[ 0.764000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.764000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.764000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.764000] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 0.764000] NET: Registered protocol family 2
[ 0.804000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.804000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 0.804000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.804000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.804000] TCP reno registered
[ 0.820000] checking if image is initramfs... it is
[ 1.380000] Freeing initrd memory: 7057k freed
[ 1.380000] audit: initializing netlink socket (disabled)
[ 1.380000] audit(1208363238.236:1): initialized
[ 1.384000] VFS: Disk quotas dquot_6.5.1
[ 1.384000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.384000] io scheduler noop registered
[ 1.384000] io scheduler anticipatory registered
[ 1.384000] io scheduler deadline registered
[ 1.384000] io scheduler cfq registered (default)
[ 1.384000] Boot video device is 0000:00:05.0
[ 1.400000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.400000] assign_interrupt_mode Found MSI capability
[ 1.400000] Allocate Port Service[0000:00:02.0:pcie00]
[ 1.400000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 1.400000] assign_interrupt_mode Found MSI capability
[ 1.400000] Allocate Port Service[0000:00:03.0:pcie00]
[ 1.400000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 1.400000] assign_interrupt_mode Found MSI capability
[ 1.400000] Allocate Port Service[0000:00:04.0:pcie00]
[ 1.400000] isapnp: Scanning for PnP cards...
[ 1.752000] isapnp: No Plug & Play device found
[ 1.772000] Real Time Clock Driver v1.12ac
[ 1.772000] hpet_resources: 0xfefff000 is busy
[ 1.772000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.772000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.772000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.776000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.776000] input: Macintosh mouse button emulation as /class/input/input0
[ 1.776000] PNP: No PS/2 controller found. Probing ports directly.
[ 1.776000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.776000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.776000] mice: PS/2 mouse device common for all mice
[ 1.776000] EISA: Probing bus 0 at eisa.0
[ 1.776000] Cannot allocate resource for EISA slot 2
[ 1.776000] Cannot allocate resource for EISA slot 4
[ 1.776000] Cannot allocate resource for EISA slot 8
[ 1.776000] EISA: Detected 0 cards.
[ 1.776000] TCP cubic registered
[ 1.776000] NET: Registered protocol family 1
[ 1.776000] Using IPI No-Shortcut mode
[ 1.776000] Magic number: 4:811:489
[ 1.776000] Freeing unused kernel memory: 364k freed
[ 2.964000] AppArmor: AppArmor initialized<5>audit(1208363239.736:2): type=1505 info="AppArmor initialized" pid=1273
[ 2.968000] fuse init (API version 7.8)
[ 2.972000] Failure registering capabilities with primary security module.
[ 2.996000] ACPI: Fan [FAN] (on)
[ 3.000000] ACPI: Thermal Zone [THRM] (40 C)
[ 3.480000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 3.480000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.480000] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[ 3.480000] NFORCE-MCP51: chipset revision 161
[ 3.480000] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 3.480000] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
[ 3.480000] ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA
[ 3.480000] ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA
[ 3.480000] Probing IDE interface ide0...
[ 3.500000] SCSI subsystem initialized
[ 3.516000] usbcore: registered new interface driver usbfs
[ 3.516000] usbcore: registered new interface driver hub
[ 3.516000] usbcore: registered new device driver usb
[ 3.516000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.532000] libata version 2.21 loaded.
[ 3.540000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 4.240000] hda: HL-DT-STDVD-RAM GSA-H54N, ATAPI CD/DVD-ROM drive
[ 4.576000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.576000] Probing IDE interface ide1...
[ 5.144000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 5.144000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
[ 5.144000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 5.144000] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 5.144000] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 5.144000] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xfe02f000
[ 5.200000] usb usb1: configuration #1 chosen from 1 choice
[ 5.200000] hub 1-0:1.0: USB hub found
[ 5.200000] hub 1-0:1.0: 8 ports detected
[ 5.304000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 5.304000] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17
[ 5.304000] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 5.304000] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 5.304000] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[ 5.304000] ehci_hcd 0000:00:0b.1: debug port 1
[ 5.304000] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 5.304000] ehci_hcd 0000:00:0b.1: irq 17, io mem 0xfe02e000
[ 5.304000] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.304000] usb usb2: configuration #1 chosen from 1 choice
[ 5.304000] hub 2-0:1.0: USB hub found
[ 5.304000] hub 2-0:1.0: 8 ports detected
[ 5.408000] sata_nv 0000:00:0e.0: version 3.4
[ 5.408000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 5.408000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 18
[ 5.408000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 5.408000] scsi0 : sata_nv
[ 5.408000] scsi1 : sata_nv
[ 5.408000] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001e000 irq 18
[ 5.408000] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001e008 irq 18
[ 5.416000] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
[ 5.416000] Uniform CD-ROM driver Revision: 3.20
[ 5.876000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.884000] ata1.00: ATA-7: ST3250410AS, 3.AAA, max UDMA/133
[ 5.884000] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 5.900000] ata1.00: configured for UDMA/133
[ 6.212000] ata2: SATA link down (SStatus 0 SControl 300)
[ 6.220000] scsi 0:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5
[ 6.220000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 6.220000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 19
[ 6.220000] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 6.220000] scsi2 : sata_nv
[ 6.220000] scsi3 : sata_nv
[ 6.220000] ata3: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001cc00 irq 19
[ 6.220000] ata4: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001cc08 irq 19
[ 6.384000] usb 2-6: new high speed USB device using ehci_hcd and address 4
[ 6.516000] usb 2-6: configuration #1 chosen from 1 choice
[ 6.532000] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.820000] usb 1-2: new full speed USB device using ohci_hcd and address 2
[ 6.852000] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.860000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 6.860000] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
[ 6.860000] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 6.860000] forcedeth: using HIGHDMA
[ 6.868000] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 6.868000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.868000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.868000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.868000] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 6.868000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.868000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.868000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.868000] sda: sda1 sda2 sda3
[ 6.904000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.908000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.060000] Attempting manual resume
[ 7.060000] swsusp: Resume From Partition 8:3
[ 7.060000] PM: Checking swsusp image.
[ 7.060000] PM: Resume from disk failed.
[ 7.072000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 7.072000] EXT3-fs: write access will be enabled during recovery.
[ 7.092000] usb 1-2: configuration #1 chosen from 1 choice
[ 7.380000] eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0
[ 7.400000] usb 1-3: new low speed USB device using ohci_hcd and address 3
[ 7.612000] usb 1-3: configuration #1 chosen from 1 choice
[ 7.616000] usbcore: registered new interface driver libusual
[ 7.620000] Initializing USB Mass Storage driver...
[ 7.620000] scsi4 : SCSI emulation for USB Mass Storage devices
[ 7.620000] usb-storage: device found at 4
[ 7.620000] usb-storage: waiting for device to settle before scanning
[ 7.620000] usbcore: registered new interface driver usb-storage
[ 7.620000] USB Mass Storage support registered.
[ 7.628000] usbcore: registered new interface driver hiddev
[ 7.632000] input: Logitech USB Receiver as /class/input/input1
[ 7.632000] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:0b.0-3
[ 7.644000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: Fixing up Logitech keyboard report descriptor
[ 7.644000] input: Logitech USB Receiver as /class/input/input2
[ 7.644000] input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-3
[ 7.644000] usbcore: registered new interface driver usbhid
[ 7.644000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 8.840000] kjournald starting. Commit interval 5 seconds
[ 8.840000] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 8.848000] ext3_orphan_cleanup: deleting unreferenced inode 965075
[ 8.868000] ext3_orphan_cleanup: deleting unreferenced inode 1195009
[ 8.880000] EXT3-fs: sda1: 2 orphan inodes deleted
[ 8.880000] EXT3-fs: recovery complete.
[ 8.896000] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.620000] usb-storage: device scan complete
[ 12.624000] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 12.628000] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 12.628000] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 12.632000] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 12.656000] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 12.656000] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 12.660000] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 12.660000] sd 4:0:0:1: Attached scsi generic sg2 type 0
[ 12.660000] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 12.660000] sd 4:0:0:2: Attached scsi generic sg3 type 0
[ 12.668000] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 12.668000] sd 4:0:0:3: Attached scsi generic sg4 type 0
[ 13.624000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.640000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.736000] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 13.736000] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 13.832000] Linux agpgart interface v0.102 (c) Dave Jones
[ 13.892000] input: PC Speaker as /class/input/input3
[ 13.992000] parport_pc 00:09: reported by Plug and Play ACPI
[ 13.992000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 14.080000] Linux video capture interface: v2.00
[ 14.148000] pwc: Philips webcam module version 10.0.13 loaded.
[ 14.148000] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[ 14.148000] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[ 14.148000] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[ 14.148000] pwc: Logitech QuickCam 4000 Pro USB webcam detected.
[ 14.148000] pwc: Registered as /dev/video0.
[ 14.152000] usbcore: registered new interface driver Philips webcam
[ 14.384000] usbcore: registered new interface driver snd-usb-audio
[ 14.464000] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 14.464000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 17
[ 14.464000] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 14.928000] lp0: using parport0 (interrupt-driven).
[ 14.972000] Adding 2980048k swap on /dev/sda3. Priority:-1 extents:1 across:2980048k
[ 15.168000] EXT3 FS on sda1, internal journal
[ 38.072000] kjournald starting. Commit interval 5 seconds
[ 38.076000] EXT3 FS on sda2, internal journal
[ 38.076000] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.856000] No dock devices found.
[ 38.976000] input: Power Button (FF) as /class/input/input4
[ 38.976000] ACPI: Power Button (FF) [PWRF]
[ 38.976000] input: Power Button (CM) as /class/input/input5
[ 38.976000] ACPI: Power Button (CM) [PWRB]
[ 39.128000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00)
[ 39.128000] powernow-k8: MP systems not supported by PSB BIOS structure
[ 39.128000] powernow-k8: MP systems not supported by PSB BIOS structure
[ 39.800000] Failure registering capabilities with primary security module.
[ 39.932000] ppdev: user-space parallel port driver
[ 40.020000] audit(1208363276.896:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5276 profile="/usr/sbin/cupsd"
[ 40.068000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 40.068000] apm: disabled - APM is not SMP safe.
[ 40.356000] Bluetooth: Core ver 2.11
[ 40.356000] NET: Registered protocol family 31
[ 40.356000] Bluetooth: HCI device and connection manager initialized
[ 40.356000] Bluetooth: HCI socket layer initialized
[ 40.376000] Bluetooth: L2CAP ver 2.8
[ 40.376000] Bluetooth: L2CAP socket layer initialized
[ 40.436000] Bluetooth: RFCOMM socket layer initialized
[ 40.436000] Bluetooth: RFCOMM TTY layer initialized
[ 40.436000] Bluetooth: RFCOMM ver 1.8
[ 44.660000] NET: Registered protocol family 17
[ 45.964000] NET: Registered protocol family 10
[ 45.964000] lo: Disabled Privacy Extensions
[ 56.488000] eth0: no IPv6 routers present
[ 77.576000] UDF-fs: No VRS found
[ 77.836000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 77.872000] ISOFS: changing to secondary root
[17568.884000] ppdev0: registered pardevice
[17568.884000] ppdev0: unregistered pardevice
[17569.428000] ppdev0: registered pardevice
[17569.480000] ppdev0: unregistered pardevice
[32772.404000] UDF-fs: No VRS found
[32772.752000] ISO 9660 Extensions: Microsoft Joliet Level 3
[32772.756000] ISOFS: changing to secondary root
ic@ic-desktop:~$ ic@ic-desktop:~/kvirc-3.4.0$ sudo dmesg
bash: ic@ic-desktop:~/kvirc-3.4.0$: No such file or directory
ic@ic-desktop:~$ [sudo] password for ic:
bash: [sudo]: command not found
ic@ic-desktop:~$ [ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
bash: syntax error near unexpected token `('
ic@ic-desktop:~$ [ 0.000000] BIOS-provided physical RAM map:
bash: [: missing `]'
ic@ic-desktop:~$ [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
bash: syntax error near unexpected token `('
ic@ic-desktop:~$ [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
bash: syntax error near unexpected token `('
ic@ic-desktop:~$ [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
bash: syntax error near unexpected token `('
ic@ic-desktop:~$ [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037eb0000 (usable)
bash: syntax error near unexpected token `('
ic@ic-desktop:~$ [ 0.000000] BIOS-e820: 0000000037eb0000 - 0000000037ee3000 (ACPI NVS)
bash: syntax error near unexpected token `('
ic@ic-desktop:~$ [ 0.000000] BIOS-e820: 0000000037ee3000 - 0000000037ef0000 (ACPI data)
bash: syntax error near unexpected token `('
ic@ic-desktop:~$ [ 0.000000] BIOS-e820: 0000000037ef0000 - 0000000037f00000 (reserved)
bash: syntax error near unexpected token `('
ic@ic-desktop:~$ [ 0.000000] BIOS-e820: 0000000038000000 - 0000000040000000 (reserved)
bash: syntax error near unexpected token `('
ic@ic-desktop:~$ [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
bash: syntax error near unexpected token `('
ic@ic-desktop:~$ [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
bash: syntax error near unexpected token `('
ic@ic-desktop:~$ [ 0.000000] 0MB HIGHMEM available.
bash: [: missing `]'
ic@ic-desktop:~$ [ 0.000000] 894MB LOWMEM available.
bash: [: missing `]'
ic@ic-desktop:~$ [ 0.000000] found SMP MP-table at 000f5830
bash: [: missing `]'
ic@ic-desktop:~$ [ 0.000000] Entering add_active_range(0, 0, 229040) 0 entries of 256 used
bash: syntax error near unexpected token `('
ic@ic-desktop:~$ [ 0.000000] Zone PFN ranges:
bash: [: missing `]'
ic@ic-desktop:~$