DRAM CS[0] base 0x00000000 size 64MB
DRAM Total size 64MB
[8192kB@ff800000] Flash: 8 MB
Addresses 20M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M - 16M): Done
*** Warning - bad CRC, using default environment
Soc: MV88F5182 Rev 2
CPU: ARM926 (Rev 0) running @ 500Mhz
SysClock = 166Mhz , TClock = 166Mhz
USB 0: host mode
USB 1: host mode
PCI 0: PCI Express Root Complex Interface
PCI 1: Conventional PCI, speed = 33000000
Hit any key to stop autoboot: 0
Marvell>> loadb
## Ready for binary (kermit) download to 0x00100000 at 115200 bps...
@CLocal command? gerkmit -i -s nb4
gerkmit: not found
@CLocal command? gkermit -i -s nb4
G-Kermit CU-1.00, Columbia University, 1999-12-25
Escape back to your local Kermit and give a RECEIVE command.
KERMIT READY TO SEND...
## Total Size = 0x003070c4 = 3174596 Bytes
## Start Addr = 0x00100000
Un-Protect Flash Bank # 1
Kernel Size = 0
Copy to Flash... done
Protect Flash Bank # 1
Marvell>> bootm
## Booting image at 00100000 ...
Image Name: NetBSD kernel image
Image Type: ARM Unknown OS Kernel Image (uncompressed)
Data Size: 3174532 Bytes = 3 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
Starting kernel ...
NetBSD/evbarm (kuroboxarm) booting ...
Loaded initial symtab at 0xc0296280, strtab at 0xc02bcccc, # entries 9795
pmap_postinit: Allocated 35 static L1 descriptor tables
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.58 (DNS323) #34: Thu Apr 10 23:18:18 VLAST 2008
leo@pardus:/home/leo/dns323/nbsd-src/src/src/sys/arch/evbarm/compile/obj/DNS323
total memory = 65536 KB
avail memory = 60100 KB
mainbus0 (root)
cpu0 at mainbus0: ARM926EJ-S rev 0 (ARM9EJ-S core)
cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled
cpu0: 32KB/32B 1-way Instruction cache
cpu0: 32KB/32B 1-way write-back-locking-C Data cache
orion0 at mainbus0: Marvell MV88F5182 SoC Rev. A0 Orion1
orion0: CPU Clock 500.000 MHz SysClock 166.666 MHz TClock 166.664 MHz
oriontmr0 at orion0 addr 0xf1020300-0xf10203ff: Marvell Orion Timer
com0 at orion0 addr 0xf1012000-0xf101201f irq 3: ns16550a, working fifo
com0: console
mvsata0 at orion0 addr 0xf1080000-0xf1085fff irq 29: Marvell Serial-ATA Host Controller (SATAHC)
mvsata0: 1hc, 2port/hc
atabus0 at mvsata0 channel 0
atabus1 at mvsata0 channel 1
ehci0 at orion0 addr 0xf1050000-0xf1051fff irq 17: Marvell Orion USB 2.0 Interface
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: vendor 0x0000 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
ehci1 at orion0 addr 0xf10a0000-0xf10a1fff irq 12: Marvell Orion USB 2.0 Interface
usb1 at ehci1: USB revision 2.0
uhub1 at usb1
uhub1: vendor 0x0000 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
orionpex0 at orion0 addr 0xf1040000-0xf1041fff irq 11: Marvell Orion PCI Express Interface
pci0 at orionpex0
Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci0 dev 0 function 0 not configured
oriongbe0 at orion0 addr 0xf1072000-0xf1073fff: Marvell Orion Gigabit Ethernet Controller
oriongbe0: Ethernet address 00:1c:f0:0a:12:34
makphy0 at oriongbe0 phy 8: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
oriontwsi0 at orion0 addr 0xf1011000-0xf101101f: Orion TWSI controller
iic0 at oriontwsi0: I2C bus
m41t80rtc0 at iic0 addr 0x68: M41T80 Real-time Clock
g760a0 at iic0 addr 0x3e: G760A Fan Controller
mvsata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0: <Hitachi HDT725050VLA360>
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
boot device: <unknown>
root on wd0f dumps on wd0b
init: copying out path `/sbin/init' 11
Thu Apr 10 23:28:53 UTC 2008
Starting file system checks:
/dev/rwd0f: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: blackbox
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:
Building databases: dev, utmp, utmpx done
Starting syslogd.
Checking for core dump...
savecore: /netbsd: kvm_openfiles: /netbsd: No such file or directory
Apr 10 23:28:57 blackbox savecore: /netbsd: kvm_openfiles: /netbsd: No such file or directory
Mounting all filesystems...
Clearing temporary files.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
/etc/rc: WARNING: No swap space configured!
Starting virecover.
Starting local daemons:.
Updating motd.
postfix/postfix-script: warning: not owned by group maildrop: /usr/sbin/postqueue
postfix/postfix-script: warning: not owned by group maildrop: /usr/sbin/postdrop
postfix/postfix-script: warning: not set-gid or not owner+group+world executable: /usr/sbin/postqueue
postfix/postfix-script: warning: not set-gid or not owner+group+world executable: /usr/sbin/postdrop
postfix/postfix-script: starting the Postfix mail system
Starting inetd.
Starting cron.
Thu Apr 10 23:29:03 UTC 2008
NetBSD/evbarm (blackbox) (console)
login: root
Apr 10 23:31:04 blackbox login: ROOT LOGIN (root) ON console
Last login: Wed Sep 9 10:48:47 2009 on console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.58 (DNS323) #34: Thu Apr 10 23:18:18 VLAST 2008
Welcome to NetBSD!
This system is running a development snapshot of the NetBSD operating system,
also known as NetBSD-current. It is highly possible for it to contain serious
bugs, regressions, broken features or other problems. Please bear this in mind
and use the system with care.
You are encouraged to test this version as thoroughly as possible. Should you
encounter any problem, please report it back to the development team using the
send-pr(1) utility (requires a working MTA). If yours is not properly set up,
use the web interface at: http://www.NetBSD.org/support/send-pr.html
Thank you for helping us test and improve NetBSD.
Terminal type is vt100.
We recommend creating a non-root account and using su(1) for root access.
blackbox# uname -a
NetBSD blackbox 4.99.58 NetBSD 4.99.58 (DNS323) #34: Thu Apr 10 23:18:18 VLAST 2008 leo@pardus:/home/leo/dns323/nbsd-src/src/src/sys/arch/evbarm/compile/obj/DNS323 evbarm
blackbox#