rendered paste bodyhelena@MSHOME:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000eb800 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
[ 0.000000] BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
[ 0.000000] BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 191MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 49136) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 49136
[ 0.000000] HighMem 49136 -> 49136
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 49136
[ 0.000000] On node 0 totalpages: 49136
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 351 pages used for memmap
[ 0.000000] Normal zone: 44689 pages, LIFO batch:7
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7400 checksum 0
[ 0.000000] ACPI: RSDP 000F7400, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 0BFFAD6A, 002C (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 0BFFFB64, 0074 (r1 COMPAL 888F2 6040000 PTL 1000000)
[ 0.000000] ACPI: DSDT 0BFFAD96, 4DCE (r1 COMPAL 888F2 6040000 MSFT 100000B)
[ 0.000000] ACPI: FACS 0BFFFFC0, 0040
[ 0.000000] ACPI: BOOT 0BFFFBD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0c000000:f3f80000)
[ 0.000000] Built 1 zonelists. Total pages: 48753
[ 0.000000] Kernel command line: root=UUID=f97f5240-625a-4dce-ad47-a151b6ba7d39 ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0118c000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 646.864 MHz processor.
[ 14.324578] Console: colour VGA+ 80x25
[ 14.325096] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 14.325727] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 14.346989] Memory: 183308k/196544k available (2015k kernel code, 12744k reserved, 915k data, 364k init, 0k highmem)
[ 14.347022] virtual kernel memory layout:
[ 14.347026] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 14.347031] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.347035] vmalloc : 0xcc800000 - 0xff7fe000 ( 815 MB)
[ 14.347040] lowmem : 0xc0000000 - 0xcbff0000 ( 191 MB)
[ 14.347044] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 14.347049] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 14.347053] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 14.347064] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 14.347174] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 14.427205] Calibrating delay using timer specific routine.. 1294.82 BogoMIPS (lpj=2589651)
[ 14.427279] Security Framework v1.0.0 initialized
[ 14.427300] SELinux: Disabled at boot.
[ 14.427345] Mount-cache hash table entries: 512
[ 14.427695] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 14.427731] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 14.427740] CPU: L2 cache: 128K
[ 14.427749] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 14.427783] Compat vDSO mapped to ffffe000.
[ 14.427823] Checking 'hlt' instruction... OK.
[ 14.443473] SMP alternatives: switching to UP code
[ 14.443946] Freeing SMP alternatives: 11k freed
[ 14.444799] Early unpacking initramfs... done
[ 15.479709] ACPI: Core revision 20070126
[ 15.480022] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 15.484867] ACPI: setting ELCR to 0200 (from 0420)
[ 15.494586] CPU0: Intel Celeron (Coppermine) stepping 06
[ 15.494604] SMP motherboard not detected.
[ 15.494612] Local APIC not detected. Using dummy APIC emulation.
[ 15.494728] Brought up 1 CPUs
[ 15.495091] Booting paravirtualized kernel on bare hardware
[ 15.495272] Time: 14:34:20 Date: 03/16/108
[ 15.495357] NET: Registered protocol family 16
[ 15.495690] EISA bus registered
[ 15.495725] ACPI: bus type pci registered
[ 15.507569] PCI: PCI BIOS revision 2.10 entry at 0xfd9be, last bus=1
[ 15.507578] PCI: Using configuration type 1
[ 15.507585] Setting up standard PCI resources
[ 15.518333] ACPI: EC: Look up EC in DSDT
[ 15.521711] ACPI: EC: GPE=0x09, ports=0x66, 0x62
[ 15.533080] ACPI: Interpreter enabled
[ 15.533094] ACPI: (supports S0 S1 S3 S4 S5)
[ 15.533147] ACPI: Using PIC for interrupt routing
[ 15.588261] ACPI: EC: GPE=0x09, ports=0x66, 0x62
[ 15.588476] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.588501] PCI: Probing PCI hardware (bus 00)
[ 15.589072] PCI quirk: region 1000-103f claimed by PIIX4 ACPI
[ 15.589083] PCI quirk: region 1040-104f claimed by PIIX4 SMB
[ 15.589801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.590021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 15.597224] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[ 15.597648] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 15.598055] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *5 7 9 10 11)
[ 15.598471] ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
[ 15.598861] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.598902] pnp: PnP ACPI init
[ 15.598936] ACPI: bus type pnp registered
[ 15.627609] pnp: PnP ACPI: found 10 devices
[ 15.627623] ACPI: ACPI bus type pnp unregistered
[ 15.627634] PnPBIOS: Disabled by ACPI PNP
[ 15.627840] PCI: Using ACPI for IRQ routing
[ 15.627852] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.629804] NET: Registered protocol family 8
[ 15.629812] NET: Registered protocol family 20
[ 15.631192] Time: tsc clocksource has been installed.
[ 15.661469] PCI: Bridge: 0000:00:01.0
[ 15.661480] IO window: 2000-2fff
[ 15.661490] MEM window: fc100000-fdffffff
[ 15.661500] PREFETCH window: 20000000-200fffff
[ 15.661510] PCI: Bus 2, cardbus bridge: 0000:00:04.0
[ 15.661518] IO window: 00001800-000018ff
[ 15.661527] IO window: 00001c00-00001cff
[ 15.661536] PREFETCH window: 10000000-13ffffff
[ 15.661545] MEM window: 14000000-17ffffff
[ 15.661554] PCI: Bus 6, cardbus bridge: 0000:00:04.1
[ 15.661561] IO window: 00003000-000030ff
[ 15.661570] IO window: 00003400-000034ff
[ 15.661579] PREFETCH window: 18000000-1bffffff
[ 15.661588] MEM window: 1c000000-1fffffff
[ 15.662430] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 15.662444] PCI: setting IRQ 10 as level-triggered
[ 15.662452] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 15.663103] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 15.663114] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 15.663162] NET: Registered protocol family 2
[ 15.699317] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 15.699450] TCP established hash table entries: 8192 (order: 4, 98304 bytes)
[ 15.699772] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 15.700106] TCP: Hash tables configured (established 8192 bind 8192)
[ 15.700116] TCP reno registered
[ 15.711629] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[ 16.584578] it is
[ 17.665934] Freeing initrd memory: 7127k freed
[ 17.666257] Simple Boot Flag at 0x37 set to 0x1
[ 17.666992] audit: initializing netlink socket (disabled)
[ 17.667077] audit(1208356461.284:1): initialized
[ 17.676169] VFS: Disk quotas dquot_6.5.1
[ 17.676433] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.676838] io scheduler noop registered
[ 17.676848] io scheduler anticipatory registered
[ 17.676855] io scheduler deadline registered
[ 17.676952] io scheduler cfq registered (default)
[ 17.676979] Limiting direct PCI/PCI transfers.
[ 17.677017] Boot video device is 0000:01:00.0
[ 17.677585] isapnp: Scanning for PnP cards...
[ 18.030956] isapnp: No Plug & Play device found
[ 18.193884] Real Time Clock Driver v1.12ac
[ 18.194231] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.199712] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.200220] input: Macintosh mouse button emulation as /class/input/input0
[ 18.200527] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 18.214886] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.214904] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.215715] mice: PS/2 mouse device common for all mice
[ 18.216188] EISA: Probing bus 0 at eisa.0
[ 18.216209] Cannot allocate resource for EISA slot 1
[ 18.216218] Cannot allocate resource for EISA slot 2
[ 18.216225] Cannot allocate resource for EISA slot 3
[ 18.216251] EISA: Detected 0 cards.
[ 18.216576] TCP cubic registered
[ 18.216629] NET: Registered protocol family 1
[ 18.216708] Using IPI No-Shortcut mode
[ 18.217190] Magic number: 4:702:586
[ 18.217303] hash matches device ptyc4
[ 18.219125] Freeing unused kernel memory: 364k freed
[ 18.259140] input: AT Translated Set 2 keyboard as /class/input/input1
[ 19.959982] AppArmor: AppArmor initialized<5>audit(1208356463.284:2): type=1505 info="AppArmor initialized" pid=1106
[ 19.999321] fuse init (API version 7.8)
[ 20.017772] Failure registering capabilities with primary security module.
[ 20.061717] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 20.061734] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 22.223891] SCSI subsystem initialized
[ 22.253574] libata version 2.21 loaded.
[ 22.262314] ata_piix 0000:00:07.1: version 2.11
[ 22.262859] scsi0 : ata_piix
[ 22.263024] scsi1 : ata_piix
[ 22.263352] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011050 irq 14
[ 22.263365] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011058 irq 15
[ 22.391962] usbcore: registered new interface driver usbfs
[ 22.392031] usbcore: registered new interface driver hub
[ 22.392141] usbcore: registered new device driver usb
[ 22.396607] USB Universal Host Controller Interface driver v3.0
[ 22.855899] Floppy drive(s): fd0 is 1.44M
[ 22.874448] FDC 0 is a post-1991 82077
[ 8.604000] Marking TSC unstable due to: possible TSC halt in C2.
[ 8.608000] Time: acpi_pm clocksource has been installed.
[ 8.616000] ata1.00: ATA-4: IBM-DARA-206000, AR2OA51A, max UDMA/66
[ 8.616000] ata1.00: 11733120 sectors, multi 16: LBA
[ 8.656000] ata1.00: configured for UDMA/33
[ 8.812000] Clocksource tsc unstable (delta = -256308839 ns)
[ 8.992000] ata2.00: ATAPI: TOSHIBA CD-ROM XM-7002Bc, 1M10, max UDMA/33
[ 9.180000] ata2.00: configured for UDMA/33
[ 9.180000] scsi 0:0:0:0: Direct-Access ATA IBM-DARA-206000 AR2O PQ: 0 ANSI: 5
[ 9.192000] scsi 1:0:0:0: CD-ROM TOSHIBA CD-ROM XM-7002Bc 1M10 PQ: 0 ANSI: 5
[ 9.204000] PCI: Enabling device 0000:00:07.2 (0000 -> 0001)
[ 9.204000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 9.204000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 9.204000] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 9.208000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 9.208000] uhci_hcd 0000:00:07.2: irq 10, io base 0x00001060
[ 9.208000] usb usb1: configuration #1 chosen from 1 choice
[ 9.208000] hub 1-0:1.0: USB hub found
[ 9.208000] hub 1-0:1.0: 2 ports detected
[ 9.404000] sd 0:0:0:0: [sda] 11733120 512-byte hardware sectors (6007 MB)
[ 9.404000] sd 0:0:0:0: [sda] Write Protect is off
[ 9.404000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.404000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.404000] sd 0:0:0:0: [sda] 11733120 512-byte hardware sectors (6007 MB)
[ 9.404000] sd 0:0:0:0: [sda] Write Protect is off
[ 9.404000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.404000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.404000] sda: sda1 sda2 < sda5 sda6 >
[ 9.464000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.484000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.484000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.552000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 9.552000] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 9.552000] Uniform CD-ROM driver Revision: 3.20
[ 9.552000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 9.716000] usb 1-1: configuration #1 chosen from 1 choice
[ 9.764000] usbcore: registered new interface driver libusual
[ 9.804000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 9.804000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 9.816000] Initializing USB Mass Storage driver...
[ 9.816000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 9.816000] usbcore: registered new interface driver usb-storage
[ 9.816000] USB Mass Storage support registered.
[ 9.816000] usb-storage: device found at 2
[ 9.816000] usb-storage: waiting for device to settle before scanning
[ 10.248000] Attempting manual resume
[ 10.248000] swsusp: Resume From Partition 8:5
[ 10.248000] PM: Checking swsusp image.
[ 10.264000] PM: Resume from disk failed.
[ 10.352000] kjournald starting. Commit interval 5 seconds
[ 10.352000] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.816000] usb-storage: device scan complete
[ 14.820000] scsi 2:0:0:0: Direct-Access Samsung YP-U2 0100 PQ: 0 ANSI: 4
[ 14.824000] sd 2:0:0:0: [sdb] 483840 2048-byte hardware sectors (991 MB)
[ 14.828000] sd 2:0:0:0: [sdb] Write Protect is off
[ 14.828000] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 14.828000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 14.836000] sd 2:0:0:0: [sdb] 483840 2048-byte hardware sectors (991 MB)
[ 14.840000] sd 2:0:0:0: [sdb] Write Protect is off
[ 14.840000] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 14.840000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 14.840000] sdb: sdb1
[ 14.848000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 14.848000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 33.352000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 33.376000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 33.404000] Yenta: CardBus bridge found at 0000:00:04.0 [1179:ff00]
[ 33.404000] Yenta: Enabling burst memory read transactions
[ 33.404000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 33.404000] Yenta: Routing CardBus interrupts to PCI
[ 33.404000] Yenta TI: socket 0000:00:04.0, mfunc 0x00c01d22, devctl 0x66
[ 33.620000] Linux agpgart interface v0.102 (c) Dave Jones
[ 33.636000] Yenta: ISA IRQ mask 0x08b8, PCI irq 10
[ 33.636000] Socket status: 30000020
[ 33.636000] Yenta: CardBus bridge found at 0000:00:04.1 [1179:ff00]
[ 33.636000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 33.636000] Yenta: Routing CardBus interrupts to PCI
[ 33.636000] Yenta TI: socket 0000:00:04.1, mfunc 0x00c01d22, devctl 0x66
[ 33.868000] Yenta: ISA IRQ mask 0x08b8, PCI irq 10
[ 33.868000] Socket status: 30000006
[ 33.876000] agpgart: Detected an Intel 440BX Chipset.
[ 33.884000] agpgart: AGP aperture is 64M @ 0xe0000000
[ 34.272000] pccard: CardBus card inserted into slot 0
[ 34.376000] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 35.696000] input: PC Speaker as /class/input/input2
[ 36.556000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 36.680000] parport_pc 00:09: reported by Plug and Play ACPI
[ 36.680000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 37.060000] 8139too Fast Ethernet driver 0.9.28
[ 37.064000] PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
[ 37.064000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 37.064000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 37.064000] eth0: RealTek RTL8139 at 0xcc9aa000, 00:08:a1:6a:b5:ca, IRQ 10
[ 37.064000] eth0: Identified 8139 chip type 'RTL-8139C'
[ 37.196000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 37.300000] cs: IO port probe 0x100-0x3af: clean.
[ 37.300000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 37.300000] cs: IO port probe 0x820-0x8ff: clean.
[ 37.304000] cs: IO port probe 0xc00-0xcf7: clean.
[ 37.304000] cs: IO port probe 0xa00-0xaff: clean.
[ 37.304000] cs: IO port probe 0x100-0x3af: clean.
[ 37.304000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 37.308000] cs: IO port probe 0x820-0x8ff: clean.
[ 37.308000] cs: IO port probe 0xc00-0xcf7: clean.
[ 37.308000] cs: IO port probe 0xa00-0xaff: clean.
[ 38.228000] PCI: Enabling device 0000:00:08.0 (0000 -> 0002)
[ 38.228000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 38.228000] PCI: setting IRQ 5 as level-triggered
[ 38.228000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 39.344000] DLLRDY not seen
[ 39.360000] ACPI: PCI interrupt for device 0000:00:08.0 disabled
[ 39.360000] CS4281: probe of 0000:00:08.0 failed with error -5
[ 40.144000] lp0: using parport0 (interrupt-driven).
[ 40.364000] Adding 305224k swap on /dev/sda5. Priority:-1 extents:1 across:305224k
[ 40.848000] EXT3 FS on sda1, internal journal
[ 43.344000] kjournald starting. Commit interval 5 seconds
[ 43.348000] EXT3 FS on sda6, internal journal
[ 43.348000] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.292000] ACPI: Battery Slot [BAT1] (battery present)
[ 46.340000] No dock devices found.
[ 46.428000] ACPI: AC Adapter [ACAD] (on-line)
[ 46.608000] input: Power Button (FF) as /class/input/input4
[ 46.608000] ACPI: Power Button (FF) [PWRF]
[ 46.648000] input: Lid Switch as /class/input/input5
[ 46.648000] ACPI: Lid Switch [LID]
[ 46.668000] input: Power Button (CM) as /class/input/input6
[ 46.668000] ACPI: Power Button (CM) [PWBN]
[ 51.388000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 53.996000] ppdev: user-space parallel port driver
[ 54.908000] audit(1208356513.686:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4655 profile="/usr/sbin/cupsd"
[ 55.328000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 55.328000] apm: overridden by ACPI.
[ 56.536000] Failure registering capabilities with primary security module.
[ 61.976000] NET: Registered protocol family 17
[ 66.652000] NET: Registered protocol family 10
[ 66.652000] lo: Disabled Privacy Extensions
[ 76.660000] eth1: no IPv6 routers present