TCNISO Embedded Telnet Server
login:
password:
Welcome to the Broadcom CLI (command-line interpreter).
To access the native VxWorks shell, type 'shell'.
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
0x000029a4 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ConfigStationMaint: (CmDocsisCtlThread)
config is kPeriodicRanging mode.
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 5
Upstream Frequency = 24784000 Hz
Upstream Power = 41 dBmV
Ranging SID = 0xa07
Upstream Symbol Rate = 2560000 sym/sec
******************************************
Starting IP Initialization with DHCP...
DHCPc: Waiting 1 seconds before sending Discover; client id htype=1, value=00:18:68:0b:9f:46
Logging event: T500.0 Acquired Upstream .......... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
CM> DHCPc: Sending Discover packet; client id htype=1, value=00:18:68:0b:9f:46
DHCPc: Received an Offer from DHCP server 00:00:00:00:00:02 (10.73.64.1); lease client id htype=1, value=00:18:68:0b:9f:46
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:18:68:0b:9f:46
DHCPc: Sending Request packet; client id htype=1, value=00:18:68:0b:9f:46
DHCPc: Received an Ack from DHCP server 00:00:00:00:00:02 (10.73.64.1); lease client id htype=1, value=00:18:68:0b:9f:46
Current IP address is default 169.0.0.1; removing existing route...
0x0000357a ['DHCP Client Thread' id=0x807c8fa0] BcmVxIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.73.69.196
Subnet Mask = 255.255.192.0
Router = 10.73.64.1
DHCP completed successfully!
DHCP Settings:
Client Id = htype=1, value=00:18:68:0b:9f:46
State = Bound (4)
Static Lease = false
AutoConfig Mode = IP, Subnet and Router
XID = 0x59e2
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:00:00:00:00:02
My offered IP address = 10.73.69.196
(1) Subnet Mask = 255.255.192.0
(3) Router IP address = 10.73.64.1
(54) DHCP Server IP address = 200.61.236.7
(82) Relay Agent IP address = 10.73.64.1
TFTP Server IP address = 10.73.64.1
CM Configuration file = 'cmd256u64c5d10.cfg'
(2) UTC Time Offset = 0 seconds
(4) Time Server IP address = 200.61.236.7
(7) Log Server IP address = 200.61.236.6
(51) Lease time = 2322932 seconds
(58) T1 (renew) = 1161466 seconds
(59) T2 (rebind) = 2032565 seconds
Lease is infinite = false
CmSnmpAgent::IpAddressAcquiredEvent for SB5100 CM Agent
IP addr = 10.73.69.196
SB5100 CM Agent ConfigIp: Ip=10.73.69.196, Subnet=255.255.192.0, Gateway=10.73.64.1
CM> Starting Time Of Day...
0x0000396c ['CmDocsisIpThread' id=0x807c3b50] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 200.61.236.7
Connecting to ToD server 200.61.236.7...
Sending UDP ToD request to server...
Logging event: DHCP WARNING - Non-critical field invalid in response.
Logging event: D511.0 Retrieved DHCP .......... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
UTC returned by ToD server 3417041550; UTC offset 0
Current system time -> SUN APR 13 02:12:30 2008
System start time -> SUN APR 13 02:12:16 2008
Starting Tftp of configuration file...
Opening file 'cmd256u64c5d10.cfg' on 10.73.64.1...
1.2.1.69.1.2.1.5.12 to 3
Not setting 1.3.6.1.2.1.69.1.2.1.6.12 to @
Not setting 1.3.6.1.2.1.69.1.2.1.7.12 to 4
Invalid TLV-11's: 1 wrong values, 0 duplicate sets.
But since we're in FACTORY mode we'll allow it.
MAX CPE per CM is being set to 6
Sending a REG-REQ to the CMTS...
Time Of Day completed...
BcmSnmpAgent::SystemTimeChangeEvent for SB5100 CM Agent
tftpInit: Tftp outbound interface flag (1024)
Connected to 10.73.64.1 [69]
mode set to octet.
getting from 10.73.64.1:cmd256u64c5d10.cfg [octet]
tftpSend: Attempt #(1) Backoff (2) tickCount (1502) blkReply (1)
Tftp read ZERO bytes, may have reached end of file.
Config file was read! IP Initialization completed...
Test of 1.3.6.1.2.1.69.1.2.1.7.11 to 4 failed w/ error code INCONSISTENT_VALUE
Not setting 1.3.6.1.2.1.69.1.6.4.1.2.40 to 4
Not setting 1.3.6.1.2.1.69.1.6.4.1.3.40 to 1
Not setting 1.3.6.1.2.1.69.1.6.4.1.5.40 to 1
Not setting 1.3.6.1.2.1.69.1.6.4.1.11.40 to 17
Not setting 1.3.6.1.2.1.69.1.6.4.1.14.40 to 1900
Not setting 1.3.6.1.2.1.69.1.6.4.1.15.40 to 1900
Not setting 1.3.6.1.2.1.69.1.6.4.1.2.45 to 4
Not setting 1.3.6.1.2.1.69.1.6.4.1.3.45 to 1
Not setting 1.3.6.1.2.1.69.1.6.4.1.5.45 to 2
Not setting 1.3.6.1.2.1.69.1.6.4.1.11.45 to 6
Not setting 1.3.6.1.2.1.69.1.6.4.1.14.45 to 25
Not setting 1.3.6.1.2.1.69.1.6.4.1.15.45 to 25
Not setting 1.3.6.1.2.1.69.1.2.1.2.11 to 200.61.236.0
Not setting 1.3.6.1.2.1.69.1.2.1.3.11 to 255.255.255.0
Not setting 1.3.6.1.2.1.69.1.2.1.4.11 to @Nmat2357#JgH
Not setting 1.3.6.1.2.1.69.1.2.1.5.11 to 3
Not setting 1.3.6.1.2.1.69.1.2.1.6.11 to @
Not setting 1.3.6.1.2.1.69.1.2.1.2.12 to 200.61.236.6
Not setting 1.3.6.1.2.1.69.1.2.1.3.12 to 255.255.255.255
Not setting 1.3.6.1.2.1.69.1.2.1.4.12 to @Nmat2357#JgH
Not setting 1.3.6.Received a REG-RSP message from the CMTS...
0x00003b38 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.0 config file!
Adding DOCSIS 1.0 CoS Settings for SID 0xa07
Class Of Service Settings:
SID = 0xa07
Max Us Burst = 3000 bytes
Max Us Rate = 65536 bits per second
Max Bucket size = 16384 bits
Bits In Bucket = 16384
Last Bucket Update Time = 15160 ms
Last Bucket Flush Time = 15160 ms
Packet Delay Time = 0 ms
Global CONCAT has been enabled for all upstream queues.
The CONCAT threshold is set to 2 packets (64 packets max).
Fragmentation is NOT enabled.
Registration complete!
Process CVC
0x00003b38 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ProcessCVC: (CmDocsisCtlThread) WARNING - No CVC included in config file; software upgrade can't be performed!
0x00003b42 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ProcessCVC: (CmDocsisCtlThread) ERROR - Config file does not include a CVC that validates properly!
DOCSIS CoS/QoS rate shaping enable is now true
CmSnmpAgent::CmOperationalEvent for SB5100 CM Agent
CmSnmpAgent operating in 1.0 mode, including docsBpi, excluding docsQos
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5100 CM Agent setting V1/V2 view to docsisNmAccessView
SB5100 CM Agent enabling management.
v1Trap: coldStartTrap 10.73.69.196->192.168.100.10:226, cmty="public"
SB5100 CM Agent sending deferred traps...
Done w/ deferred traps.
v1Trap: linkUpTrap(if2) 192.168.100.1->192.168.100.10:226, cmty="public"
v1Trap: linkUpTrap(if2) 10.73.69.196->192.168.100.10:226, cmty="public"
SB5100 CPE Agent setting V1/V2 view to docsisNmAccessView
0x00003b4c ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchBpkm: (CmDocsisCtlThread) BPKM disabled via manufacturing setting.
Enabling network access for all CPE ports.
mot_scanList: Writing to Flash!
0x00003b88 ['CmDocsisCtlThread' id=0x807bda80] BcmDocsisCmHalIf::ConfigOperational: (DOCSIS CableModem HalIf) Running IGMP in DOCSIS 1.0 mode!
BcmCmDocsisStatusEventCodes::kCmIsOperational
0x00003b92 ['IGMP Thread' id=0x807b7580] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread)
Stopping DHCP server...
Leaving standby mode!
Stopping DHCP server...
Logging event: TLV-11 - Illegal Set operation failed
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <73040200> TLV-11 - Illegal Set operation failed
NonVolDeviceDriver::NonVolDriverWrite: WARNING - Dynamic NonVol is 'full' - no more free segments; need to erase and start over!
NonVolDeviceDriver::NonVolDriverWrite: WARNING - Erasing flash region; a power failure here will cause settings to be lost!
Logging event: D509.0 Retrieved TFTP Config cmd256u64c5d10.cfg SUCCESS
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898626> D509.0 Retrieved TFTP Config cmd256u64c5d10.cfg SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public"
Logging event: D507.0 Retrieved Time....... SUCCESS
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898625> D507.0 Retrieved Time....... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public"
SB5100 CM Event Log sending deferred async messages...
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898630> T501.0 Acquired Downstream (543000000 Hz)........ SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public"
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898629> T500.0 Acquired Upstream .......... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public"
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <68000300> DHCP WARNING - Non-critical field invalid in response.
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898627> D511.0 Retrieved DHCP .......... SUCCESS
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public"
Done w/ deferred msgs
Logging event: I500.0 Registration Completed
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898628> I500.0 Registration Completed
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public"
Logging event: M569.1 Standby mode disabled
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898633> M569.1 Standby mode disabled
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public"