rendered paste body>>> virtual console started for client 00.02.55.54.45.3A <<<
gathering previous messages...
Linux version 2.6.18-boel_v3.7.5 (root@oscar1.ussg.indiana.edu) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Thu Oct 19 18:06:46 EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffec340 (usable)
BIOS-e820: 000000003ffec340 - 000000003fff0000 (ACPI data)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 0009e1d0
On node 0 totalpages: 262124
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32748 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 IBM ) @ 0x000fdfd0
ACPI: RSDT (v001 IBM SERSPIDR 0x00001000 IBM 0x45444f43) @ 0x3ffeff80
ACPI: FADT (v001 IBM SERSPIDR 0x00001000 IBM 0x45444f43) @ 0x3ffeff00
ACPI: MADT (v001 IBM SERSPIDR 0x00001000 IBM 0x45444f43) @ 0x3ffefe80
ACPI: DSDT (v001 IBM SERSPIDR 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4e8
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 16-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 30 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Detected 864.010 MHz processor.
Built 1 zonelists. Total pages: 262124
Kernel command line: vga=extended initrd=initrd.img root=/dev/ram MONITOR_SERVER=192.168.1.100 MONITOR_CONSOLE=yes BOOT_IMAGE=kernel
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec01000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x50
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1026584k/1048496k available (2856k kernel code, 21240k reserved, 1024k data, 336k init, 130992k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1728.78 BogoMIPS (lpj=3457560)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: Intel Pentium III (Coppermine) stepping 06
Checking 'hlt' instruction... OK.
ACPI: Core revision 20060707
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 7760k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:01.0
PCI: Firmware left 0000:00:0a.0 e100 interrupts enabled, disabling
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LPE1] (IRQs *10)
ACPI: PCI Interrupt Link [LPE2] (IRQs *10)
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LPVI] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LPUS] (IRQs *7)
ACPI: PCI Root Bridge [PCI1] (0000:01)
PCI: Probing PCI hardware (bus 01)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Link [LPSA] (IRQs *9)
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP1A] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP1B] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP2A] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP2B] (IRQs) *0, disabled.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS not found.
highmem bounce pool size: 64 pages
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
ACPI: Power Button (FF) [PWRF]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Intel(R) PRO/10GbE Network Driver - version 1.0.109-k2
Copyright (c) 1999-2006 Intel Corporation.
dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15
FW Version=$Version$
pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
eth0: 0000:00:02.0, 00:02:55:54:45:3A, IRQ 16.
Board assembly 754338-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 25 (level, low) -> IRQ 17
eth1: 0000:00:0a.0, 00:02:55:54:45:3B, IRQ 17.
Board assembly 754338-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ThunderLAN driver v1.15
TLAN: 0 devices installed, PCI: 0 EISA: 0
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Uhhuh. NMI received for unknown reason 35 on CPU 0.
Dazed and confused, but trying to continue
Do you have a strange power saving mode enabled?
cs89x0:cs89x0_probe(0x0)
PP_addr at 300[a]: 0xffff
eth2: incorrect signature at 300[c]: 0xffff!=0x630E
PP_addr at 320[a]: 0xffff
eth2: incorrect signature at 320[c]: 0xffff!=0x630E
PP_addr at 340[a]: 0xffff
eth2: incorrect signature at 340[c]: 0xffff!=0x630E
PP_addr at 360[a]: 0xffff
eth2: incorrect signature at 360[c]: 0xffff!=0x630E
PP_addr at 200[a]: 0xffff
eth2: incorrect signature at 200[c]: 0xffff!=0x630E
PP_addr at 220[a]: 0xffff
eth2: incorrect signature at 220[c]: 0xffff!=0x630E
PP_addr at 240[a]: 0xffff
eth2: incorrect signature at 240[c]: 0xffff!=0x630E
PP_addr at 260[a]: 0xffff
eth2: incorrect signature at 260[c]: 0xffff!=0x630E
PP_addr at 280[a]: 0xffff
eth2: incorrect signature at 280[c]: 0xffff!=0x630E
PP_addr at 2a0[a]: 0xffff
eth2: incorrect signature at 2a0[c]: 0xffff!=0x630E
PP_addr at 2c0[a]: 0xffff
eth2: incorrect signature at 2c0[c]: 0xffff!=0x630E
PP_addr at 2e0[a]: 0xffff
eth2: incorrect signature at 2e0[c]: 0xffff!=0x630E
cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP
Trying to free nonexistent resource <0000000000000000-0000000000000010>
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
depca: probe of depca.0 failed with error -16
eth%d: i82596 initialization timed out
myri10ge: Version 1.0.0
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-d (2.4 port) Nov-17-2001 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver kaweth
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI Shortcut mode
RAMDISK: Compressed image found at block 0
Time: tsc clocksource has been installed.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 336k freed
input: AT Translated Set 2 keyboard as /class/input/input0
Uhhuh. NMI received for unknown reason 35 on CPU 0.
Dazed and confused, but trying to continue
Do you have a strange power saving mode enabled?
mount_proc
monitor_save_dmesg
mount_sys
mount_pts
get_arch
adjust_arch
ifconfig_loopback
load_my_modules
start_udevd
bin dev etc lib linuxrc my_modules old_root proc root sbin sys tmp usr var Starting kernel event manager...
...done.
bin dev etc lib linuxrc my_modules old_root proc root sbin sys tmp usr var Loading hardware drivers...
...done.
start_hotplug
bin dev etc lib linuxrc my_modules old_root proc root sbin sys tmp usr var Starting hotplug subsystem...
...done.
variableize_kernel_append_parameters
read_kernel_append_parameters
read_local_cfg
Checking for floppy diskette.
YOU MAY SEE SOME "wrong magic" ERRORS HERE, AND THAT IS NORMAL.
No floppy diskette in drive.
read_kernel_append_parameters
start_network
IP Address not set with pre-boot settings.
sleep 0: This is to give your switch (if you're using one) time to
recognize your ethernet card before we try the network.
Tip: You can use <ctrl>+<c> to pass the time (pun intended).
modprobe: could not parse modules.dep
dhclient
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
Listening on LPF/lo/<null>
Sending on LPF/lo/<null>
Listening on LPF/eth1/00:02:55:54:45:3b
Sending on LPF/eth1/00:02:55:54:45:3b
Listening on LPF/eth0/00:02:55:54:45:3a
Sending on LPF/eth0/00:02:55:54:45:3a
Sending on Socket/fallback/fallback-net
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
DHCPOFFER from 192.168.1.100
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.100
Using DHCP server (very deprecated) as IMAGESERVER: 192.168.1.100
bound to 192.168.1.1 -- renewal in 21600 seconds.
Overriding any DHCP settings with pre-boot settings from kernel append
parameters.
read_kernel_append_parameters
ping_test
Pinging your SystemImager server to ensure we have network connectivity.
PING ATTEMPT 1:
PING 192.168.1.100 (192.168.1.100): 56 data bytes
84 bytes from 192.168.1.100: icmp_seq=0 ttl=64 time=18.5 ms
--- 192.168.1.100 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 18.5/18.5/18.5 ms
We have connectivity to your SystemImager server!
Monitoring initialized.
start_syslogd
get_boel_binaries_tarball
rsync -av 192.168.1.100::boot/i386/standard/boel_binaries.tar.gz /tmp/boel_binaries
receiving file list ... done
boel_binaries.tar.gz
sent 120 bytes received 5428165 bytes 10856570.00 bytes/sec
total size is 5427378 speedup is 1.00
tmpfs_watcher
get_scripts_directory
rsync -a 192.168.1.100::scripts/ /scripts/
autodetect_hardware_and_load_modules
Detecting hardware:
e100 e100 serverworks aic7xxx usb-ohci
Loading sd_mod...
done!
Loading ide-disk...
done!
Loading e100...
not needed or already loaded.
Loading e100...
not needed or already loaded.
Loading serverworks...
done!
Loading aic7xxx...
done!
Loading usb-ohci...
not needed or already loaded.
get_hostname_by_hosts_file
Hosts file exists...
Searching for this machine's hostname in /scripts/hosts by IP: 192.168.1.1
This hosts name is: gnome01
run_pre_install_scripts
>>> 99all.harmless_example_script
I live in /var/lib/systemimager/scripts/pre-install.
choose_autoinstall_script
Using autoinstall script: /scripts/gnome01.sh
write_variables
run_autoinstall_script
>>> /scripts/gnome01.sh
get_arch
enumerate_disks
sda
DISKS=1
Partitioning /dev/sda...
Old partition table for /dev/sda:
Disk geometry for /dev/sda: 0kB - 9100MB
Disk label type: msdos
Number Start End Size Type File system Flags
1 1kB 100MB 100MB primary ext3 boot
2 100MB 9100MB 9000MB extended
5 100MB 612MB 512MB logical linux-swap
6 612MB 9100MB 8488MB logical ext3
dd if=/dev/zero of=/dev/sda bs=512 count=1 || shellout
1+0 records in
1+0 records out
blockdev --rereadpt /dev/sda
parted -s -- /dev/sda mklabel msdos || shellout
Creating partition /dev/sda1.
parted -s -- /dev/sda mkpart primary 0 100 || shellout
parted -s -- /dev/sda set 1 boot on
Creating partition /dev/sda2.
parted -s -- /dev/sda mkpart extended 100 9100 || shellout
Creating partition /dev/sda5.
parted -s -- /dev/sda mkpart logical 100 612 || shellout
Creating partition /dev/sda6.
parted -s -- /dev/sda mkpart logical 612 9100 || shellout
New partition table for /dev/sda:
parted -s -- /dev/sda print
Disk geometry for /dev/sda: 0kB - 9100MB
Disk label type: msdos
Number Start End Size Type File system Flags
1 1kB 100MB 100MB primary ext3 boot
2 100MB 9100MB 9000MB extended
5 100MB 612MB 512MB logical linux-swap
6 612MB 9100MB 8488MB logical ext3
Load software RAID modules.
insmod: cannot insert `/lib/modules/2.6.18-boel_v3.7.5/kernel/drivers/md/md-mod.ko': File exists (-1): File exists
insmod: cannot insert `/lib/modules/2.6.18-boel_v3.7.5/kernel/drivers/md/md-mod.ko': File exists (-1): File exists
modprobe: module raid5 not found.
modprobe: failed to load module raid5
modprobe: module raid6 not found.
modprobe: failed to load module raid6
insmod: cannot insert `/lib/modules/2.6.18-boel_v3.7.5/kernel/drivers/md/md-mod.ko': File exists (-1): File exists
Load device mapper driver (for LVM).
Load additional filesystem drivers.
modprobe: module fat not found.
modprobe: failed to load module fat
modprobe: module vfat not found.
modprobe: failed to load module vfat
mke2fs -j /dev/sda6 || shellout
mke2fs 1.38 (30-Jun-2005)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
1036288 inodes, 2072355 blocks
103617 blocks (5.00%) reserved for the super user
First data block=0
64 block groups
32768 blocks per group, 32768 fragments per group
16192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Writing inode tables: 0/64 1/64 2/64 3/64 4/64 5/64 6/64 7/64 8/64 9/6410/6411/6412/6413/6414/6415/6416/6417/6418/6419/6420/6421/6422/6423/6424/6425/6426/6427/6428/6429/6430/6431/6432/6433/6434/6435/6436/6437/6438/6439/6440/6441/6442/6443/6444/6445/6446/6447/6448/6449/6450/6451/6452/6453/6454/6455/6456/6457/6458/6459/6460/6461/6462/6463/64done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 32 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
mkdir -p /a/ || shellout
mount /dev/sda6 /a/ -t ext3 -o defaults || shellout
mkswap -v1 /dev/sda5 || shellout
Setting up swapspace version 1, size = 511991 kB
no label, UUID=dd5d3897-892f-4145-9e36-fcd1c03ebd91
swapon /dev/sda5 || shellout
mke2fs -j /dev/sda1 || shellout
mke2fs 1.38 (30-Jun-2005)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
24480 inodes, 97656 blocks
4882 blocks (5.00%) reserved for the super user
First data block=1
12 block groups
8192 blocks per group, 8192 fragments per group
2040 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Writing inode tables: 0/12 1/12 2/12 3/12 4/12 5/12 6/12 7/12 8/12 9/1210/1211/12done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 36 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
mkdir -p /a/boot || shellout
mount /dev/sda1 /a/boot -t ext3 -o defaults || shellout
mkdir -p /a/proc || shellout
mount proc /a/proc -t proc -o defaults || shellout
mkdir -p /a/sys || shellout
mount sysfs /a/sys -t sysfs -o defaults || shellout
Evaluating image size.
Report task started.
Quietly installing image...
/rsync -aHS --exclude=lost+found/ --exclude=/proc/* --numeric-ids 192.168.1.100::oscarimage/ /a/