rendered paste bodydmesg
Linux version 2.6.22 (roger@thecheat) (gcc version 4.1.2) #5 Fri Feb 29 23:06:48 EST 2008
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
Machine: TCT_HAMMER
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 8192
DMA zone: 64 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 8128 pages, LIFO batch:0
Normal zone: 0 pages used for memmap
CPU S3C2410A (id 0x32410002)
S3C2410: core 202.800 MHz, memory 101.400 MHz, peripheral 50.700 MHz
S3C24XX Clocks, (c) 2004 Simtec Electronics
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists. Total pages: 8128
Kernel command line: console=ttySAC0 root=/dev/ram0
irq: clearing subpending status 00000002
PID hash table entries: 128 (order: 7, 512 bytes)
timer tcon=00000000, tcnt a509, tcfg 00000200,00000000, usec 00001e4c
Console: colour dummy device 80x30
selected clock c01e6f90 (pclk) quot 27, calc 113169
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 29400KB available (1760K code, 166K data, 92K init)
Calibrating delay loop... 101.17 BogoMIPS (lpj=252928)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
S3C2410: Initialising architecture
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1024K
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) �� 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
s3c2410-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410
s3c2410-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410
s3c2410-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410
RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize
drivers/net/usb/kaweth.c: Driver loading
usbcore: registered new interface driver kaweth
physmap platform flash device: 01000000 at 00000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x20000,blocks=128
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 2 MTD partitions on "physmap-flash.0":
0x00000000-0x00240000 : "System"
0x00240000-0x01000000 : "JFFS2"
usbmon: debugfs is not available
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
s3c2410-ohci s3c2410-ohci: s3c2410_start_hc:
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
s3c2410-ohci s3c2410-ohci: created debug files
s3c2410-ohci s3c2410-ohci: OHCI controller state
s3c2410-ohci s3c2410-ohci: OHCI 1.0, NO legacy support registers
s3c2410-ohci s3c2410-ohci: control 0x083 HCFS=operational CBSR=3
s3c2410-ohci s3c2410-ohci: cmdstatus 0x00000 SOC=0
s3c2410-ohci s3c2410-ohci: intrstatus 0x00000004 SF
s3c2410-ohci s3c2410-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
s3c2410-ohci s3c2410-ohci: hcca frame #0005
s3c2410-ohci s3c2410-ohci: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2)
s3c2410-ohci s3c2410-ohci: roothub.b 00000000 PPCM=0000 DR=0000
s3c2410-ohci s3c2410-ohci: roothub.status 00008000 DRWE
s3c2410-ohci s3c2410-ohci: roothub.portstatus [0] 0x00010101 CSC PPS CCS
s3c2410-ohci s3c2410-ohci: roothub.portstatus [1] 0x00000100 PPS
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: S3C24XX OHCI
usb usb1: Manufacturer: Linux 2.6.22 ohci_hcd
usb usb1: SerialNumber: s3c24xx
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0xa006,0x2900,0x0000,c0253a88,000f)
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: no over-current protection
hub 1-0:1.0: power on to power good time: 4ms
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0xa000,0x0000,0x0000,c0253a44,0004)
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0x2303,0x0008,0x0001,c0253a44,0000)
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0x2303,0x0008,0x0002,c0253a44,0000)
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
Initializing USB Mass Storage driver...
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0xa300,0x0000,0x0001,c026be34,0004)
s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0x2301,0x0010,0x0001,c026be54,0000)
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0xa300,0x0000,0x0001,c026be34,0004)
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0xa300,0x0000,0x0001,c026be34,0004)
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0xa300,0x0000,0x0001,c026be34,0004)
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0xa300,0x0000,0x0001,c026be34,0004)
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0xa300,0x0000,0x0001,c026be34,0004)
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0x2303,0x0004,0x0001,c026bdc4,0000)
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0xa300,0x0000,0x0001,c026bda4,0004)
s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0x2301,0x0014,0x0001,c026bdc4,0000)
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0x2303,0x0004,0x0001,c026bdc4,0000)
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0xa300,0x0000,0x0001,c026bda4,0004)
s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0x2301,0x0014,0x0001,c026bdc4,0000)
usb 1-1: ep0 maxpacket = 8
usb 1-1: default language 0x0409
usb 1-1: new device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-1: Product: 3COM USB Network Interface (3C19250)
usb 1-1: Manufacturer: 3COM
usb 1-1: SerialNumber: 0050DA333B80
usb 1-1: uevent
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: uevent
usb 1-1:1.0: uevent
kaweth 1-1:1.0: usb_probe_interface
kaweth 1-1:1.0: usb_probe_interface - got id
drivers/net/usb/kaweth.c: Kawasaki Device Probe (Device number:2): 0x0506:0x03e8:0x0203
drivers/net/usb/kaweth.c: Device at c08977f0
drivers/net/usb/kaweth.c: Descriptor length: 12 type: 1
drivers/net/usb/kaweth.c: Resetting.
drivers/net/usb/kaweth.c: kaweth_reset(c088b180)
drivers/net/usb/kaweth.c: kaweth_control()
drivers/net/usb/kaweth.c: kaweth_reset() returns 0.
drivers/net/usb/kaweth.c: Firmware present in device.
drivers/net/usb/kaweth.c: Reading kaweth configuration
drivers/net/usb/kaweth.c: kaweth_control()
drivers/net/usb/kaweth.c: Statistics collection: 13fbffff
drivers/net/usb/kaweth.c: Multicast filter limit: 80
drivers/net/usb/kaweth.c: MTU: 1514
drivers/net/usb/kaweth.c: Read MAC address 00:50:da:33:3b:80
drivers/net/usb/kaweth.c: Setting URB size to 1664
drivers/net/usb/kaweth.c: kaweth_control()
drivers/net/usb/kaweth.c: Set SOFS wait to 5
drivers/net/usb/kaweth.c: kaweth_control()
drivers/net/usb/kaweth.c: Set receive filter to 28
drivers/net/usb/kaweth.c: kaweth_control()
drivers/net/usb/kaweth.c: Initializing net device.
drivers/net/usb/kaweth.c: kaweth interface created at eth0
drivers/net/usb/kaweth.c: Kaweth probe returning.
s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(c0890008,0xa300,0x0000,0x0002,c026be34,0004)
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
s3c2410_udc: debugfs dir creation failed -19
gs_bind: Gadget Serial v2.2 bound
gs_module_init: Gadget Serial v2.2 loaded
input: gpio-keys as /class/input/input0
evbug.c: Connected device: "gpio-keys", gpio-keys/input0
input: TCT Hammer beeper as /class/input/input1
evbug.c: Connected device: "TCT Hammer beeper", hammer/gpio
Registered led device: led0
Registered led device: led1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
length error
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 92K
selected clock c01e6f90 (pclk) quot 27, calc 113169
selected clock c01e6f90 (pclk) quot 27, calc 113169
drivers/net/usb/kaweth.c: Opening network device.
drivers/net/usb/kaweth.c: Setting Rx mode to 28
drivers/net/usb/kaweth.c: Setting Rx mode to 28
drivers/net/usb/kaweth.c: Setting Rx mode to 28
drivers/net/usb/kaweth.c: Setting Rx mode to 28
selected clock c01e6f90 (pclk) quot 27, calc 113169
selected clock c01e6f90 (pclk) quot 27, calc 113169
selected clock c01e6f90 (pclk) quot 27, calc 113169
selected clock c01e6f90 (pclk) quot 27, calc 113169