rendered paste body[root@localhost config]# xm create -c 192.168.10.107.cfg
Using config file "./192.168.10.107.cfg".
Started domain vps2
Bootdata ok (command line is ip=192.168.10.107:1.2.3.4:192.168.10.1:255.255.255.0:vps2.getvoip.co.za:eth0:off root=/dev/sda1 ro)
Linux version 2.6.18-53.1.14.el5xen (mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Mar 5 12:08:17 EST 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000008800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 34816
Kernel command line: ip=192.168.10.107:1.2.3.4:192.168.10.1:255.255.255.0:vps2.getvoip.co.za:eth0:off root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 8192 bytes)
Xen reported: 1595.926 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Software IO TLB disabled
Memory: 122900k/139264k available (2358k kernel code, 8008k reserved, 1325k data, 172k init)
Calibrating delay using timer specific routine.. 3991.51 BogoMIPS (lpj=7983033)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
(SMP-)alternatives turned off
Brought up 1 CPUs
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 70A7A0 could not acquire Mutex [2] [20060707]
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 70A7A0 could not acquire Mutex [2] [20060707]
Initializing CPU#1
migration_cost=15474
Brought up 2 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1207854734.555:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key F8170EB5CF71EF90
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Bootdata ok (command line is ip=192.168.10.107:1.2.3.4:192.168.10.1:255.255.255.0:vps2.getvoip.co.za:eth0:off root=/dev/sda1 ro)
Linux version 2.6.18-53.1.14.el5xen (mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Mar 5 12:08:17 EST 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000008800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 34816
Kernel command line: ip=192.168.10.107:1.2.3.4:192.168.10.1:255.255.255.0:vps2.getvoip.co.za:eth0:off root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 8192 bytes)
Xen reported: 1595.926 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Software IO TLB disabled
Memory: 122900k/139264k available (2358k kernel code, 8008k reserved, 1325k data, 172k init)
Calibrating delay using timer specific routine.. 3991.51 BogoMIPS (lpj=7983033)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
(SMP-)alternatives turned off
Brought up 1 CPUs
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 70A7A0 could not acquire Mutex [2] [20060707]
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 70A7A0 could not acquire Mutex [2] [20060707]
Initializing CPU#1
migration_cost=15474
Brought up 2 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1207854734.555:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key F8170EB5CF71EF90
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vif/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
VFS: Cannot open root device "sda1" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[root@localhost config]#
[root@localhost config]# cat 192.168.10.107.cfg
kernel = "/boot/vmlinuz-2.6.18-53.1.14.el5xen"
memory = 128
name = "vps2"
disk = ['file:/xen/images/f5.img,sda1,w', 'file:/xen/images/192.168.10.107.swap,sda2,w']
root = "/dev/sda1 ro"
vif = [ 'ip=192.168.10.107' ]
vcpus = 2
# network
dhcp = "off"
ip = "192.168.10.107"
gateway = "192.168.10.1"
netmask = "255.255.255.0"
hostname = "vps2.getvoip.co.za"
[root@localhost config]#