# /etc/inittab
#
# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
#
# Note: BusyBox init doesn't support runlevels. The runlevels field is
# completely ignored by BusyBox init. If you want runlevels, use
# sysvinit.
#
# Format for each entry: <id>:<runlevels>:<action>:<process>
#
# id == tty to run on, or empty for /dev/console
# runlevels == ignored
# action == one of sysinit, respawn, askfirst, wait, and once
# process == program to run
#
# Startup the system
#
null::sysinit:/bin/mount -t proc proc /proc
null::sysinit:/bin/mount -t usbfs usbfs /proc/bus/usb
null::sysinit:/bin/mount -t sysfs sysfs /sys
null::sysinit:/bin/mount -t jffs2 /dev/mtdblock1 /
null::sysinit:/bin/mount -o remount,rw /
# Ssetup USB
null::sysinit:/sbin/modprobe ohci-hcd
null::sysinit:/bin/sleep 2
# Setup the Thumb Drive
null::sysinit:/sbin/modprobe usb-storage
null::sysinit:/bin/sleep 5
null::sysinit:/bin/mount -t ext2 /dev/sda1 /opt
# Mount all "drives"
null::sysinit:/bin/mount -a
#
# Setup networking
#
null::sysinit:/sbin/modprobe usbnet
null::sysinit:/bin/hostname -F /etc/hostname
null::sysinit:/sbin/ifconfig lo 127.0.0.1 up
null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
# Setup WiFi
null::sysinit:/sbin/modprobe rt73usb
#null::sysinit:/bin/sleep 10
null::sysinit:/sbin/ifconfig wlan0 66.93.38.119 netmask 255.255.255.0 broadcast 66.93.38.255 up
null::sysinit:/sbin/iwconfig wlan0 essid thedynaplexnetwork
null::sysinit:/sbin/iwconfig wlan0 channel 11
null::sysinit:/sbin/iwconfig wlan0 mode managed
null::sysinit:/sbin/iwconfig wlan0 enc on
null::sysinit:/sbin/iwconfig wlan0 key 5350432F36DFCA34F894B783EF
# Setup Gadget Ethernet
null::sysinit:/sbin/modprobe g-ether
null::sysinit:/sbin/ifconfig usb0 192.168.55.5 netmask 255.255.255.0 broadcast 192.168.55.255 up
#
# Restore /etc from Thumb Drive
#
#null::sysinit:/bin/cp -rpd /opt/share/configs/etc /
#
# Now run any RC scripts
#
::sysinit:/etc/init.d/rcS
# Set up a couple of getty's
#tty1::respawn:/sbin/getty 38400 tty1
#tty2::respawn:/sbin/getty 38400 tty2
#
# Put a getty on the serial port
#
#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
ttySAC0::respawn:/sbin/getty -L ttySAC0 115200 vt100
#ttySAC1::respawn:/sbin/getty -L ttySAC1 115200 vt100
#
# Logging junk
#
null::sysinit:/bin/touch /var/log/messages
null::respawn:/sbin/syslogd -n -m 0
null::respawn:/sbin/klogd -n
#tty3::respawn:/usr/bin/tail -f /var/log/messages
#
# Stuff to do for the 3-finger salute
#
::ctrlaltdel:/sbin/reboot
#
# Stuff to do before rebooting
#
null::shutdown:/usr/bin/killall klogd
null::shutdown:/usr/bin/killall syslogd
null::shutdown:/bin/umount -a -r
null::shutdown:/sbin/swapoff -a