rendered paste bodyroot@SaiDawi:/home/saidawi# dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 767MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 196592
[ 0.000000] HighMem 196592 -> 196592
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 196592
[ 0.000000] On node 0 totalpages: 196592
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1503 pages used for memmap
[ 0.000000] Normal zone: 190993 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6120 checksum 0
[ 0.000000] ACPI: RSDP 000F6120, 0014 (r0 VIAP4M)
[ 0.000000] ACPI: RSDT 2FFF3000, 0028 (r1 VIAP4M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 2FFF3040, 0074 (r1 VIAP4M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 2FFF30C0, 2EE3 (r1 VIAP4M AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 2FFF0000, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cfff0000)
[ 0.000000] Built 1 zonelists. Total pages: 195057
[ 0.000000] Kernel command line: root=UUID=e36e8304-e181-486a-b30d-59b5a124471d ro quiet
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0160e000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1996.777 MHz processor.
[ 20.048268] Console: colour VGA+ 80x25
[ 20.049320] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 20.050999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.073262] Memory: 767884k/786368k available (2015k kernel code, 17876k reserved, 915k data, 364k init, 0k highmem)
[ 20.073278] virtual kernel memory layout:
[ 20.073279] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 20.073281] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 20.073282] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
[ 20.073284] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
[ 20.073285] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 20.073287] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 20.073288] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 20.073292] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 20.073352] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 20.153255] Calibrating delay using timer specific routine.. 3998.42 BogoMIPS (lpj=7996849)
[ 20.153299] Security Framework v1.0.0 initialized
[ 20.153311] SELinux: Disabled at boot.
[ 20.153332] Mount-cache hash table entries: 512
[ 20.153590] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 20.153616] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 20.153622] CPU: L2 cache: 128K
[ 20.153626] CPU: Hyper-Threading is disabled
[ 20.153632] CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000b080 00000000 00000000 00000000
[ 20.153652] Compat vDSO mapped to ffffe000.
[ 20.153680] Checking 'hlt' instruction... OK.
[ 20.169434] SMP alternatives: switching to UP code
[ 20.170027] Freeing SMP alternatives: 11k freed
[ 20.170587] Early unpacking initramfs... done
[ 20.620476] ACPI: Core revision 20070126
[ 20.620622] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 20.622299] ACPI: setting ELCR to 0200 (from 0a20)
[ 20.686329] CPU0: Intel(R) Celeron(R) CPU 2.00GHz stepping 07
[ 20.686341] SMP motherboard not detected.
[ 20.686344] Local APIC not detected. Using dummy APIC emulation.
[ 20.686439] Brought up 1 CPUs
[ 20.686732] Booting paravirtualized kernel on bare hardware
[ 20.686860] Time: 12:04:15 Date: 03/09/108
[ 20.686920] NET: Registered protocol family 16
[ 20.687219] EISA bus registered
[ 20.687253] ACPI: bus type pci registered
[ 20.708207] PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=1
[ 20.708211] PCI: Using configuration type 1
[ 20.708213] Setting up standard PCI resources
[ 20.712040] ACPI: EC: Look up EC in DSDT
[ 20.716558] ACPI: Interpreter enabled
[ 20.716569] ACPI: (supports S0 S1 S4 S5)
[ 20.716605] ACPI: Using PIC for interrupt routing
[ 20.730534] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.730560] PCI: Probing PCI hardware (bus 00)
[ 20.731681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.751008] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 20.751243] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 20.751497] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 20.751753] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 20.752106] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.752145] pnp: PnP ACPI init
[ 20.752174] ACPI: bus type pnp registered
[ 20.760182] pnp: PnP ACPI: found 15 devices
[ 20.760192] ACPI: ACPI bus type pnp unregistered
[ 20.760200] PnPBIOS: Disabled by ACPI PNP
[ 20.760419] PCI: Using ACPI for IRQ routing
[ 20.760426] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 20.788949] NET: Registered protocol family 8
[ 20.788955] NET: Registered protocol family 20
[ 20.789224] pnp: 00:00: iomem range 0xcf800-0xcffff has been reserved
[ 20.789232] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 20.789237] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 20.789242] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 20.792211] Time: tsc clocksource has been installed.
[ 20.820766] PCI: Bridge: 0000:00:01.0
[ 20.820770] IO window: disabled.
[ 20.820777] MEM window: ec000000-edffffff
[ 20.820783] PREFETCH window: e0000000-e7ffffff
[ 20.820810] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 20.820840] NET: Registered protocol family 2
[ 20.860197] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 20.860523] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 20.863674] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 20.864772] TCP: Hash tables configured (established 131072 bind 65536)
[ 20.864780] TCP reno registered
[ 20.876358] checking if image is initramfs... it is
[ 21.323380] Switched to high resolution mode on CPU 0
[ 21.724279] Freeing initrd memory: 7052k freed
[ 21.725239] audit: initializing netlink socket (disabled)
[ 21.725273] audit(1207742656.164:1): initialized
[ 21.733345] VFS: Disk quotas dquot_6.5.1
[ 21.733566] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.733928] io scheduler noop registered
[ 21.733934] io scheduler anticipatory registered
[ 21.733936] io scheduler deadline registered
[ 21.734009] io scheduler cfq registered (default)
[ 21.734031] PCI: VIA PCI bridge detected. Disabling DAC.
[ 21.734087] Boot video device is 0000:01:00.0
[ 21.734714] isapnp: Scanning for PnP cards...
[ 22.088433] isapnp: No Plug & Play device found
[ 22.284193] Real Time Clock Driver v1.12ac
[ 22.284548] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 22.284700] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.285346] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.287964] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.288939] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.292279] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 22.292769] input: Macintosh mouse button emulation as /class/input/input0
[ 22.293110] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 22.293594] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.293607] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.294487] mice: PS/2 mouse device common for all mice
[ 22.294985] EISA: Probing bus 0 at eisa.0
[ 22.295029] EISA: Detected 0 cards.
[ 22.295222] TCP cubic registered
[ 22.295264] NET: Registered protocol family 1
[ 22.295325] Using IPI No-Shortcut mode
[ 22.295730] Magic number: 4:447:76
[ 22.296677] Freeing unused kernel memory: 364k freed
[ 22.337800] input: AT Translated Set 2 keyboard as /class/input/input1
[ 22.750414] AppArmor: AppArmor initialized<5>audit(1207742657.164:2): type=1505 info="AppArmor initialized" pid=1148
[ 22.769791] fuse init (API version 7.8)
[ 22.784521] Failure registering capabilities with primary security module.
[ 22.807496] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 22.807509] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 24.306285] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 24.306297] PCI: setting IRQ 5 as level-triggered
[ 24.306303] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 24.306318] 3c59x: Donald Becker and others.
[ 24.306327] 0000:00:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at f0814000.
[ 24.395325] SCSI subsystem initialized
[ 24.404947] libata version 2.21 loaded.
[ 24.416649] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 24.416660] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 24.418094] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 24.418733] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 24.418742] PCI: setting IRQ 11 as level-triggered
[ 24.418748] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 24.418760] PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 11
[ 24.418792] VP_IDE: chipset revision 6
[ 24.418795] VP_IDE: not 100% native mode: will probe irqs later
[ 24.418817] VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
[ 24.418829] ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA
[ 24.418849] ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA
[ 24.418860] Probing IDE interface ide0...
[ 24.491372] usbcore: registered new interface driver usbfs
[ 24.491430] usbcore: registered new interface driver hub
[ 24.491534] usbcore: registered new device driver usb
[ 24.493269] USB Universal Host Controller Interface driver v3.0
[ 24.837575] Floppy drive(s): fd0 is 1.44M
[ 24.857314] FDC 0 is a post-1991 82077
[ 24.881516] hda: SAMSUNG SP1213N, ATA DISK drive
[ 4.840000] Marking TSC unstable due to: possible TSC halt in C2.
[ 4.852000] Time: acpi_pm clocksource has been installed.
[ 5.040000] hdb: ST340015A, ATA DISK drive
[ 5.096000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.100000] Probing IDE interface ide1...
[ 5.968000] hdc: LITE-ON DVDRW SHW-1635S, ATAPI CD/DVD-ROM drive
[ 6.752000] hdd: GCR-8523B, ATAPI CD/DVD-ROM drive
[ 6.808000] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.824000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 6.824000] ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 6.824000] uhci_hcd 0000:00:11.2: UHCI Host Controller
[ 6.828000] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
[ 6.828000] uhci_hcd 0000:00:11.2: irq 11, io base 0x0000d800
[ 6.828000] usb usb1: configuration #1 chosen from 1 choice
[ 6.828000] hub 1-0:1.0: USB hub found
[ 6.828000] hub 1-0:1.0: 2 ports detected
[ 6.844000] hda: max request size: 512KiB
[ 6.888000] hda: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[ 6.892000] hda: cache flushes supported
[ 6.892000] hda: hda1 hda2 < hda5 hda6 > hda3
[ 6.920000] hdb: max request size: 128KiB
[ 6.920000] hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[ 6.920000] hdb: cache flushes supported
[ 6.920000] hdb:<6>ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 6.932000] uhci_hcd 0000:00:11.3: UHCI Host Controller
[ 6.932000] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
[ 6.932000] uhci_hcd 0000:00:11.3: irq 11, io base 0x0000dc00
[ 6.932000] usb usb2: configuration #1 chosen from 1 choice
[ 6.932000] hub 2-0:1.0: USB hub found
[ 6.932000] hub 2-0:1.0: 2 ports detected
[ 6.964000] hdb1 hdb2 < hdb5 >
[ 7.036000] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
[ 7.036000] Uniform CD-ROM driver Revision: 3.20
[ 7.036000] ACPI: PCI Interrupt 0000:00:11.4[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 7.036000] uhci_hcd 0000:00:11.4: UHCI Host Controller
[ 7.036000] uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 3
[ 7.036000] uhci_hcd 0000:00:11.4: irq 11, io base 0x0000e000
[ 7.040000] usb usb3: configuration #1 chosen from 1 choice
[ 7.040000] hub 3-0:1.0: USB hub found
[ 7.040000] hub 3-0:1.0: 2 ports detected
[ 7.104000] hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
[ 7.784000] Attempting manual resume
[ 7.784000] swsusp: Resume From Partition 3:6
[ 7.784000] PM: Checking swsusp image.
[ 7.784000] PM: Resume from disk failed.
[ 7.820000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 7.820000] EXT3-fs: write access will be enabled during recovery.
[ 13.088000] kjournald starting. Commit interval 5 seconds
[ 13.088000] EXT3-fs: hda3: orphan cleanup on readonly fs
[ 13.088000] ext3_orphan_cleanup: deleting unreferenced inode 5210543
[ 13.784000] ext3_orphan_cleanup: deleting unreferenced inode 5210585
[ 13.796000] EXT3-fs: hda3: 2 orphan inodes deleted
[ 13.796000] EXT3-fs: recovery complete.
[ 13.796000] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.440000] eth0: setting full-duplex.
[ 23.256000] NET: Registered protocol family 17
[ 24.648000] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.656000] agpgart: Detected VIA P4X266 chipset
[ 24.660000] agpgart: AGP aperture is 64M @ 0xe8000000
[ 24.676000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 24.680000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.020000] irda_init()
[ 25.020000] NET: Registered protocol family 23
[ 25.376000] nvidia: module license 'NVIDIA' taints kernel.
[ 25.900000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 25.916000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639 Mon Apr 16 20:20:06 PDT 2007
[ 26.204000] input: PC Speaker as /class/input/input2
[ 26.680000] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 26.704000] parport_pc 00:0a: reported by Plug and Play ACPI
[ 26.704000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 26.988000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 26.988000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 28.772000] lp0: using parport0 (interrupt-driven).
[ 28.868000] Adding 2273156k swap on /dev/hda6. Priority:-1 extents:1 across:2273156k
[ 29.060000] EXT3 FS on hda3, internal journal
[ 33.480000] No dock devices found.
[ 33.756000] input: Power Button (FF) as /class/input/input4
[ 33.756000] ACPI: Power Button (FF) [PWRF]
[ 33.760000] input: Power Button (CM) as /class/input/input5
[ 33.760000] ACPI: Power Button (CM) [PWRB]
[ 33.760000] input: Sleep Button (CM) as /class/input/input6
[ 33.760000] ACPI: Sleep Button (CM) [SLPB]
[ 35.912000] Failure registering capabilities with primary security module.
[ 36.400000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 36.400000] apm: overridden by ACPI.
[ 36.800000] /dev/vmmon[4887]: Module vmmon: registered with major=10 minor=165
[ 36.800000] /dev/vmmon[4887]: Module vmmon: initialized
[ 37.000000] /dev/vmnet: open called by PID 4916 (vmnet-bridge)
[ 37.000000] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 37.000000] /dev/vmnet: port on hub 0 successfully opened
[ 37.000000] bridge-eth0: enabling the bridge
[ 37.000000] bridge-eth0: up
[ 37.000000] bridge-eth0: already up
[ 37.000000] bridge-eth0: attached
[ 37.056000] /dev/vmnet: open called by PID 4932 (vmnet-netifup)
[ 37.056000] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 37.056000] /dev/vmnet: port on hub 1 successfully opened
[ 37.064000] /dev/vmnet: open called by PID 4933 (vmnet-netifup)
[ 37.064000] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 37.064000] /dev/vmnet: port on hub 8 successfully opened
[ 37.156000] /dev/vmnet: open called by PID 4931 (vmnet-natd)
[ 37.156000] /dev/vmnet: port on hub 8 successfully opened
[ 37.300000] /dev/vmnet: open called by PID 4957 (vmnet-dhcpd)
[ 37.300000] /dev/vmnet: port on hub 1 successfully opened
[ 37.504000] /dev/vmnet: open called by PID 4962 (vmnet-dhcpd)
[ 37.508000] /dev/vmnet: port on hub 8 successfully opened
[ 41.416000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 41.416000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 41.416000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 41.516000] PPP generic driver version 2.4.2
[ 42.012000] NET: Registered protocol family 10
[ 42.012000] lo: Disabled Privacy Extensions
[ 43.060000] PPP BSD Compression module registered
[ 43.216000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 52.336000] vmnet8: no IPv6 routers present
[ 52.880000] eth0: no IPv6 routers present
[ 52.928000] vmnet1: no IPv6 routers present
root@SaiDawi:/home/saidawi#