rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe70000 (usable)
[ 0.000000] BIOS-e820: 000000003fe70000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7d10
[ 0.000000] Entering add_active_range(0, 0, 261744) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261744
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261744
[ 0.000000] On node 0 totalpages: 261744
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 252 pages used for memmap
[ 0.000000] HighMem zone: 32116 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7C60 checksum 0
[ 0.000000] ACPI: RSDP 000F7C60, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 3FE7B369, 0084 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3FE83BF8, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 3FE7C5E7, 759D (r1 HP 30BC 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FE84FC0, 0040
[ 0.000000] ACPI: APIC 3FE83CEC, 0068 (r1 HP 30BC 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 3FE83D54, 0038 (r1 HP 30BC 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 3FE83D8C, 003C (r1 HP 30BC 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA 3FE83DC8, 0032 (r1 HP 30BB 6040000 PTL 1)
[ 0.000000] ACPI: APIC 3FE83DFA, 0068 (r1 HP 30BC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3FE83E62, 0028 (r1 HP 30BC 6040000 LTP 1)
[ 0.000000] ACPI: SLIC 3FE83E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 3FE7C3DD, 020A (r1 HP 30BC 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE7B979, 025F (r1 HP 30BC 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE7B8D3, 00A6 (r1 HP 30BC 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE7B3ED, 04E6 (r1 HP 30BC 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 259700
[ 0.000000] Kernel command line: root=UUID=e219086e-394a-44a4-88fc-bf6b37674140 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1663.234 MHz processor.
[ 11.440097] Console: colour VGA+ 80x25
[ 11.440367] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 11.440663] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 11.468588] Memory: 1026368k/1046976k available (2015k kernel code, 19956k reserved, 915k data, 364k init, 129472k highmem)
[ 11.468597] virtual kernel memory layout:
[ 11.468598] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 11.468599] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 11.468600] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 11.468601] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 11.468602] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 11.468604] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 11.468605] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 11.468608] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 11.468638] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 11.468782] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 11.468787] hpet0: 3 64-bit timers, 14318180 Hz
[ 11.549713] Calibrating delay using timer specific routine.. 3330.04 BogoMIPS (lpj=6660085)
[ 11.549731] Security Framework v1.0.0 initialized
[ 11.549735] SELinux: Disabled at boot.
[ 11.549747] Mount-cache hash table entries: 512
[ 11.549851] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 11.549859] monitor/mwait feature present.
[ 11.549860] using mwait in idle threads.
[ 11.549864] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.549867] CPU: L2 cache: 2048K
[ 11.549869] CPU: Physical Processor ID: 0
[ 11.549871] CPU: Processor Core ID: 0
[ 11.549873] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 11.549881] Compat vDSO mapped to ffffe000.
[ 11.549892] Checking 'hlt' instruction... OK.
[ 11.565787] SMP alternatives: switching to UP code
[ 11.566173] Early unpacking initramfs... done
[ 11.895143] ACPI: Core revision 20070126
[ 11.895192] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 11.901332] CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 02
[ 11.901349] SMP alternatives: switching to SMP code
[ 11.901420] Booting processor 1/1 eip 3000
[ 11.911635] Initializing CPU#1
[ 11.989195] Calibrating delay using timer specific routine.. 3326.25 BogoMIPS (lpj=6652501)
[ 11.989201] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 11.989206] monitor/mwait feature present.
[ 11.989209] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.989211] CPU: L2 cache: 2048K
[ 11.989213] CPU: Physical Processor ID: 0
[ 11.989215] CPU: Processor Core ID: 1
[ 11.989217] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 11.989794] CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 02
[ 11.989818] Total of 2 processors activated (6656.29 BogoMIPS).
[ 11.990014] ENABLING IO-APIC IRQs
[ 11.990215] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 12.137115] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 12.157111] Brought up 2 CPUs
[ 12.282313] migration_cost=38
[ 12.282441] Booting paravirtualized kernel on bare hardware
[ 12.282528] Time: 10:38:52 Date: 03/05/108
[ 12.282546] NET: Registered protocol family 16
[ 12.282627] EISA bus registered
[ 12.282632] ACPI: bus type pci registered
[ 12.282747] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=7
[ 12.282749] PCI: Using configuration type 1
[ 12.282751] Setting up standard PCI resources
[ 12.285146] ACPI: EC: Look up EC in DSDT
[ 12.286127] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 12.287493] ACPI: System BIOS is requesting _OSI(Linux)
[ 12.287495] ACPI: Please test with "acpi_osi=!Linux"
[ 12.287496] Please send dmidecode to linux-acpi@vger.kernel.org
[ 12.287943] ACPI: Interpreter enabled
[ 12.287946] ACPI: (supports S0 S3 S4 S5)
[ 12.287963] ACPI: Using IOAPIC for interrupt routing
[ 12.294614] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 12.294672] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.294686] PCI: Probing PCI hardware (bus 00)
[ 12.295404] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 12.295409] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 12.296854] PCI: Transparent bridge - 0000:00:1e.0
[ 12.296943] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.297229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 12.297361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 12.297483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 12.297601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 12.297733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 12.304168] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 12.304293] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
[ 12.304415] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
[ 12.304537] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
[ 12.304658] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[ 12.304778] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[ 12.304937] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[ 12.305058] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
[ 12.305183] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.305193] pnp: PnP ACPI init
[ 12.305201] ACPI: bus type pnp registered
[ 12.307562] pnp: PnP ACPI: found 11 devices
[ 12.307564] ACPI: ACPI bus type pnp unregistered
[ 12.307568] PnPBIOS: Disabled by ACPI PNP
[ 12.307610] PCI: Using ACPI for IRQ routing
[ 12.307613] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 12.335583] NET: Registered protocol family 8
[ 12.335585] NET: Registered protocol family 20
[ 12.335632] pnp: 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
[ 12.335638] pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
[ 12.335642] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 12.335645] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 12.335648] pnp: 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 12.335654] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 12.335662] pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
[ 12.335665] pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 12.336797] Time: tsc clocksource has been installed.
[ 12.336810] Switched to high resolution mode on CPU 0
[ 12.336895] Switched to high resolution mode on CPU 1
[ 12.365937] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[ 12.366002] PCI: Bridge: 0000:00:01.0
[ 12.366003] IO window: disabled.
[ 12.366008] MEM window: dc000000-ddffffff
[ 12.366011] PREFETCH window: c0000000-cfffffff
[ 12.366015] PCI: Bridge: 0000:00:1c.0
[ 12.366018] IO window: 2000-2fff
[ 12.366025] MEM window: d8000000-d9ffffff
[ 12.366030] PREFETCH window: d2000000-d3ffffff
[ 12.366036] PCI: Bridge: 0000:00:1c.1
[ 12.366039] IO window: 3000-3fff
[ 12.366045] MEM window: d6000000-d7ffffff
[ 12.366050] PREFETCH window: d0000000-d1ffffff
[ 12.366056] PCI: Bridge: 0000:00:1c.2
[ 12.366060] IO window: 4000-4fff
[ 12.366066] MEM window: da000000-dbffffff
[ 12.366071] PREFETCH window: d4000000-d5ffffff
[ 12.366077] PCI: Bridge: 0000:00:1e.0
[ 12.366079] IO window: disabled.
[ 12.366085] MEM window: de000000-de0fffff
[ 12.366089] PREFETCH window: disabled.
[ 12.366106] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 12.366111] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 12.366135] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 12.366141] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 12.366164] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 12.366170] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 12.366194] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 12.366200] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 12.366212] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
[ 12.366218] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 12.366229] NET: Registered protocol family 2
[ 12.416689] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 12.416741] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 12.417440] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 12.417689] TCP: Hash tables configured (established 131072 bind 65536)
[ 12.417692] TCP reno registered
[ 12.432806] checking if image is initramfs... it is
[ 13.082115] Freeing initrd memory: 7050k freed
[ 13.082231] Simple Boot Flag at 0x35 set to 0x1
[ 13.082747] audit: initializing netlink socket (disabled)
[ 13.082763] audit(1207391932.244:1): initialized
[ 13.082861] highmem bounce pool size: 64 pages
[ 13.084873] VFS: Disk quotas dquot_6.5.1
[ 13.084920] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.085008] io scheduler noop registered
[ 13.085010] io scheduler anticipatory registered
[ 13.085012] io scheduler deadline registered
[ 13.085025] io scheduler cfq registered (default)
[ 13.085128] Boot video device is 0000:01:00.0
[ 13.085214] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 13.085253] assign_interrupt_mode Found MSI capability
[ 13.085256] Allocate Port Service[0000:00:01.0:pcie00]
[ 13.085340] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.085399] assign_interrupt_mode Found MSI capability
[ 13.085401] Allocate Port Service[0000:00:1c.0:pcie00]
[ 13.085433] Allocate Port Service[0000:00:1c.0:pcie02]
[ 13.085536] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 13.085595] assign_interrupt_mode Found MSI capability
[ 13.085597] Allocate Port Service[0000:00:1c.1:pcie00]
[ 13.085632] Allocate Port Service[0000:00:1c.1:pcie02]
[ 13.085733] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 13.085792] assign_interrupt_mode Found MSI capability
[ 13.085794] Allocate Port Service[0000:00:1c.2:pcie00]
[ 13.085829] Allocate Port Service[0000:00:1c.2:pcie02]
[ 13.085998] isapnp: Scanning for PnP cards...
[ 13.439374] isapnp: No Plug & Play device found
[ 13.461004] Real Time Clock Driver v1.12ac
[ 13.461241] hpet_resources: 0xfed00000 is busy
[ 13.461270] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 13.462374] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 13.462503] input: Macintosh mouse button emulation as /class/input/input0
[ 13.462583] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 13.480735] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.480740] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 13.480865] mice: PS/2 mouse device common for all mice
[ 13.480965] EISA: Probing bus 0 at eisa.0
[ 13.480973] Cannot allocate resource for EISA slot 1
[ 13.480977] Cannot allocate resource for EISA slot 2
[ 13.480979] Cannot allocate resource for EISA slot 3
[ 13.480981] Cannot allocate resource for EISA slot 4
[ 13.481000] EISA: Detected 0 cards.
[ 13.481163] TCP cubic registered
[ 13.481176] NET: Registered protocol family 1
[ 13.481196] Using IPI No-Shortcut mode
[ 13.481355] Magic number: 4:3:628
[ 13.481634] Freeing unused kernel memory: 364k freed
[ 13.499473] input: AT Translated Set 2 keyboard as /class/input/input1
[ 14.684902] AppArmor: AppArmor initialized<5>audit(1207391933.744:2): type=1505 info="AppArmor initialized" pid=1244
[ 14.690758] fuse init (API version 7.8)
[ 14.695139] Failure registering capabilities with primary security module.
[ 14.718607] ACPI: SSDT 3FE7C11F, 01F6 (r1 HP 30BC 3000 INTL 20050624)
[ 14.718823] ACPI: SSDT 3FE7BBD8, 04C2 (r1 HP 30BC 3001 INTL 20050624)
[ 14.719291] Monitor-Mwait will be used to enter C-1 state
[ 14.719294] Monitor-Mwait will be used to enter C-2 state
[ 14.719297] Monitor-Mwait will be used to enter C-3 state
[ 14.719301] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 14.719306] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 14.719550] ACPI: SSDT 3FE7C315, 00C8 (r1 HP 30BC 3000 INTL 20050624)
[ 14.719750] ACPI: SSDT 3FE7C09A, 0085 (r1 HP 30BC 3000 INTL 20050624)
[ 14.720239] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 14.720245] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.128000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.132000] Time: hpet clocksource has been installed.
[ 3.132000] ACPI: Thermal Zone [THR1] (0 C)
[ 3.572000] usbcore: registered new interface driver usbfs
[ 3.572000] usbcore: registered new interface driver hub
[ 3.572000] usbcore: registered new device driver usb
[ 3.572000] USB Universal Host Controller Interface driver v3.0
[ 3.572000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.572000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.572000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.572000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.572000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[ 3.572000] usb usb1: configuration #1 chosen from 1 choice
[ 3.572000] hub 1-0:1.0: USB hub found
[ 3.572000] hub 1-0:1.0: 2 ports detected
[ 3.676000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 3.676000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.676000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.676000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.676000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[ 3.676000] usb usb2: configuration #1 chosen from 1 choice
[ 3.676000] hub 2-0:1.0: USB hub found
[ 3.676000] hub 2-0:1.0: 2 ports detected
[ 3.704000] SCSI subsystem initialized
[ 3.708000] libata version 2.21 loaded.
[ 3.712000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 3.712000] Copyright (c) 1999-2006 Intel Corporation.
[ 3.780000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.780000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.780000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.780000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.780000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 3.780000] usb usb3: configuration #1 chosen from 1 choice
[ 3.780000] hub 3-0:1.0: USB hub found
[ 3.780000] hub 3-0:1.0: 2 ports detected
[ 3.884000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.884000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.884000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.884000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.884000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 3.884000] usb usb4: configuration #1 chosen from 1 choice
[ 3.884000] hub 4-0:1.0: USB hub found
[ 3.884000] hub 4-0:1.0: 2 ports detected
[ 3.988000] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.988000] PCI: Setting latency timer of device 0000:07:05.0 to 64
[ 3.988000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.988000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.988000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.988000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.988000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.988000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.988000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xde304000
[ 3.992000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.992000] usb usb5: configuration #1 chosen from 1 choice
[ 3.992000] hub 5-0:1.0: USB hub found
[ 3.992000] hub 5-0:1.0: 8 ports detected
[ 4.000000] Clocksource tsc unstable (delta = -213146095 ns)
[ 4.040000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[de000000-de0007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.096000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 4.096000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 4.156000] e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1b:24:21:2c:d9
[ 4.216000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 4.216000] ahci 0000:00:1f.2: version 2.2
[ 4.216000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 4.400000] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 4.540000] usb 5-4: configuration #1 chosen from 1 choice
[ 5.024000] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 5.196000] usb 3-2: configuration #1 chosen from 1 choice
[ 5.220000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 5.220000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 5.220000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.220000] scsi0 : ahci
[ 5.220000] scsi1 : ahci
[ 5.220000] scsi2 : ahci
[ 5.220000] scsi3 : ahci
[ 5.220000] ata1: SATA max UDMA/133 cmd 0xf8826500 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.220000] ata2: SATA max UDMA/133 cmd 0xf8826580 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.220000] ata3: SATA max UDMA/133 cmd 0xf8826600 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.220000] ata4: SATA max UDMA/133 cmd 0xf8826680 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.316000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0024491200]
[ 5.704000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.704000] ata1.00: ATA-7: WDC WD1600BEVS-60RST0, 04.01G04, max UDMA/100
[ 5.704000] ata1.00: 312581808 sectors, multi 16: LBA48
[ 5.704000] ata1.00: configured for UDMA/100
[ 6.016000] ata2: SATA link down (SStatus 0 SControl 0)
[ 6.328000] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.640000] ata4: SATA link down (SStatus 0 SControl 0)
[ 6.640000] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-6 04.0 PQ: 0 ANSI: 5
[ 6.640000] ata_piix 0000:00:1f.1: version 2.11
[ 6.640000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 6.640000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 6.640000] scsi4 : ata_piix
[ 6.640000] scsi5 : ata_piix
[ 6.640000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14
[ 6.640000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15
[ 6.648000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 6.648000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.648000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.648000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.648000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 6.648000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.648000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.648000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.648000] sda: sda1 sda2
[ 6.720000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.720000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.976000] ata5.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, 0817, max MWDMA2
[ 6.996000] Attempting manual resume
[ 6.996000] swsusp: Resume From Partition 8:2
[ 6.996000] PM: Checking swsusp image.
[ 6.996000] PM: Resume from disk failed.
[ 7.048000] kjournald starting. Commit interval 5 seconds
[ 7.048000] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.164000] ata5.00: configured for MWDMA2
[ 7.164000] ata6: port disabled. ignoring.
[ 7.172000] scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632M 0817 PQ: 0 ANSI: 5
[ 7.172000] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 13.872000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.880000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.932000] Linux agpgart interface v0.102 (c) Dave Jones
[ 13.944000] intel_rng: FWH not detected
[ 13.984000] iTCO_vendor_support: vendor-support=0
[ 13.984000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 13.984000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 13.984000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.368000] ieee80211_crypt: registered algorithm 'NULL'
[ 14.384000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 14.384000] Uniform CD-ROM driver Revision: 3.20
[ 14.384000] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 14.392000] Bluetooth: Core ver 2.11
[ 14.392000] NET: Registered protocol family 31
[ 14.392000] Bluetooth: HCI device and connection manager initialized
[ 14.392000] Bluetooth: HCI socket layer initialized
[ 14.440000] Bluetooth: HCI USB driver ver 2.9
[ 14.444000] usbcore: registered new interface driver hci_usb
[ 14.448000] Linux video capture interface: v2.00
[ 14.484000] nvidia: module license 'NVIDIA' taints kernel.
[ 14.736000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.736000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 14.736000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 14.740000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 14.740000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 14.784000] sdhci: Secure Digital Host Controller Interface driver
[ 14.784000] sdhci: Copyright(c) Pierre Ossman
[ 14.784000] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
[ 14.784000] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
[ 14.784000] ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 14.784000] PCI: Setting latency timer of device 0000:07:05.1 to 64
[ 14.784000] mmc0: SDHCI at 0xde000800 irq 17 DMA
[ 14.800000] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[ 14.804000] usbcore: registered new interface driver uvcvideo
[ 14.804000] USB Video Class driver (v0.1.0)
[ 14.812000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[ 14.812000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 14.812000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.812000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 14.816000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 15.056000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 15.056000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 15.372000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 15.440000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 15.668000] lp: driver loaded but no devices found
[ 15.724000] Adding 5895844k swap on /dev/sda2. Priority:-1 extents:1 across:5895844k
[ 16.252000] EXT3 FS on sda1, internal journal
[ 16.676000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 17.468000] ACPI: AC Adapter [ACAD] (on-line)
[ 17.484000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 17.484000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 17.504000] No dock devices found.
[ 17.688000] ACPI: Battery Slot [BAT0] (battery present)
[ 17.720000] input: Power Button (FF) as /class/input/input3
[ 17.720000] ACPI: Power Button (FF) [PWRF]
[ 17.720000] input: Power Button (CM) as /class/input/input4
[ 17.720000] ACPI: Power Button (CM) [PWRB]
[ 17.720000] input: Sleep Button (CM) as /class/input/input5
[ 17.720000] ACPI: Sleep Button (CM) [SLPB]
[ 17.720000] input: Lid Switch as /class/input/input6
[ 17.720000] ACPI: Lid Switch [LID]
[ 18.952000] ppdev: user-space parallel port driver
[ 19.108000] audit(1207391950.083:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5114 profile="/usr/sbin/cupsd"
[ 19.148000] apm: BIOS not found.
[ 19.392000] Failure registering capabilities with primary security module.
[ 19.596000] Bluetooth: L2CAP ver 2.8
[ 19.596000] Bluetooth: L2CAP socket layer initialized
[ 19.712000] Bluetooth: RFCOMM socket layer initialized
[ 19.712000] Bluetooth: RFCOMM TTY layer initialized
[ 19.712000] Bluetooth: RFCOMM ver 1.8
[ 185.804000] NET: Registered protocol family 17
[ 196.460000] NET: Registered protocol family 10
[ 196.460000] lo: Disabled Privacy Extensions
[ 196.460000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 207.252000] eth1: no IPv6 routers present
[20619.608000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[20619.784000] usb 1-2: configuration #1 chosen from 1 choice
[20620.240000] usbcore: registered new interface driver snd-usb-audio
[25193.480000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[25193.480000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[25193.488000] usbcore: registered new interface driver libusual
[25193.496000] Initializing USB Mass Storage driver...
[25193.496000] usbcore: registered new interface driver usb-storage
[25193.496000] USB Mass Storage support registered.
[25301.728000] usb 1-2: USB disconnect, address 2
[25306.856000] usb 1-2: new full speed USB device using uhci_hcd and address 3
[25307.032000] usb 1-2: configuration #1 chosen from 1 choice
[25701.548000] usb 1-2: USB disconnect, address 3
[25704.952000] usb 1-2: new full speed USB device using uhci_hcd and address 4
[25705.128000] usb 1-2: configuration #1 chosen from 1 choice