Dixie7:~ # alsaconf
┌─────────────────────────────────────────────────────────────┐
│ │
│ ALSA CONFIGURATOR │
│ version 1.0.16 │
│ │
│ This script is a configurator for │
│ Advanced Linux Sound Architecture (ALSA) driver. │
│ │
│ │
│ If ALSA is already running, you should close all sound │
│ apps now and stop the sound driver. │
│ alsaconf will try to do this, but it's not 100% sure. │
│ │
│ │
│ │
│ │
│ │
├─────────────────────────────────────────────────────────────┤
│ < OK > │
└─────────────────────────────────────────────────────────────┘
Building card database..
┌──────────────────────────────────────┐
│ Searching sound cards │
│ ┌────────────────────────────────┐ │
│ │ 96% │ │
│ └────────────────────────────────┘ │
└──────────────────────────────────────┘
┌──────────────────────────Soundcard Selection─────────────────────────────┐
│ │
│ Following card(s) are found on your system. │
│ Choose a soundcard to configure: │
│ ┌──────────────────────────────────────────────────────────────────────┐ │
│ │ emu10k1 Creative Labs SB Audigy (rev 04) │ │
│ │ legacy Probe legacy ISA (non-PnP) chips │ │
│ │ │ │
│ │ │ │
│ │ │ │
│ │ │ │
│ │ │ │
│ │ │ │
│ └──────────────────────────────────────────────────────────────────────┘ │
├──────────────────────────────────────────────────────────────────────────┤
│ < OK > <Cancel> │
└──────────────────────────────────────────────────────────────────────────┘
┌────────────────────────────────────────────────┐
│ │
│ Configuring snd-emu10k1 │
│ Do you want to modify /etc/modprobe.d/sound │
│ (and /etc/modprobe.conf if present)? │
├────────────────────────────────────────────────┤
│ < Yes > < No > │
└────────────────────────────────────────────────┘
┌──────────────────────────────────────────────────────────┐
│ │
│ │
│ OK, sound driver is configured. │
│ │
│ ALSA CONFIGURATOR │
│ │
│ will prepare the card for playing now. │
│ │
│ Now I'll run alsasound init script, then I'll use │
│ amixer to raise the default volumes. │
│ You can change the volume later via a mixer │
│ program such as alsamixer or gamix. │
│ │
├─────────────────────────────────────────────────────92%──┤
│ < OK > │
└──────────────────────────────────────────────────────────┘
Loading driver...
Starting sound driver: emu10k1WARNING: Error inserting snd (/lib/modules/2.6.22.17-0.1-default/updates/alsa/acore/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_hwdep (/lib/modules/2.6.22.17-0.1-default/updates/alsa/acore/snd-hwdep.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_util_mem (/lib/modules/2.6.22.17-0.1-default/updates/alsa/synth/snd-util-mem.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.22.17-0.1-default/updates/alsa/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_seq_device (/lib/modules/2.6.22.17-0.1-default/updates/alsa/acore/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.22.17-0.1-default/updates/alsa/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.22.17-0.1-default/updates/alsa/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_rawmidi (/lib/modules/2.6.22.17-0.1-default/updates/alsa/acore/snd-rawmidi.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_emu10k1 (/lib/modules/2.6.22.17-0.1-default/updates/alsa/pci/emu10k1/snd-emu10k1.ko): Unknown symbol in module, or unknown parameter (see dmesg)
failed
Setting default volumes...
amixer: Mixer attach default error: No such file or directory
┌───────────────────────────────────────────────────────────────┐
│ │
│ The mixer is set up now for for playing. │
│ Shall I try to play a sound sample now? │
│ │
│ NOTE: │
│ If you have a big amplifier, lower your volumes or say no. │
│ Otherwise check that your speaker volume is open, │
│ and look if you can hear test sound. │
│ │
├───────────────────────────────────────────────────────────────┤
│ < Yes > < No > │
└───────────────────────────────────────────────────────────────┘
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2144:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:583: audio open error: No such file or directory
Saving the mixer setup used for this in /etc/asound.state.
/usr/sbin/alsactl: save_state:1497: No soundcards found...
===============================================================================
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
Have a lot of fun!