# This is a sample ~/.gnokiirc file. Copy it into your
# home directory and name it .gnokiirc.
# See http://wiki.gnokii.org/index.php/Config for working examples.
#
[global]
# Set port to the physical port used to connect to your phone.
# Linux version is:
port = /dev/ttyS0
#
# For MacOSX you will need something like:
# port = /dev/cu.USA28X1P1.1
#
# For Win32 you want to use:
# port = com1:
# or similiar.
#
# FreeBSD (probably NetBSD and OpenBSD too) use:
# port = /dev/cuaa0
#
# With Linux-IrDA you will want to use
# port = /dev/ircomm0
# or similiar.
#
# Use this setting also for the Bluetooth connection:
# port = aa:bb:cc:dd:ee:ff
# when using it with AT driver set it to:
# port = /dev/rfcomm0
# or similiar.
#
# For the Linux USB cables you will need one of the following settings (or
# similiar)
# port = /dev/ttyUSB0
# port = /dev/tts/USB0
# port = /dev/ttyACM0
# the last one will work only with AT driver. The correct setting should be
# given in the dmesg output.
#
# If you use connection type dku2libusb use it to denote which use endpoint
# you'd wish to use. It is useful when you have more than one phone connected
# to your computer using DKU2 cable. Numbering goes from 1 upwards.
# Default is 1.
# port = 1
# Set model to the model number of your phone. For the
# Symbian phones use:
# model = symbian
# For other non-Nokia phones and when you want to use AT
# mode use:
# model = AT
# If you can't figure out what to put here read the FAQ.
# If it still doesn't help, consult gnokii-ml or #gnokii at freenode.
model = AT
# There are few main models that should make use of the certain drivers.
# These are: 6110, 7110, 6510, 3110, 2110, 6160.
# Set IrDA device name.
# If you use irda connection you may want gnokii to autodetect the irda
# device it connects to. This is fine for most of the cases. if you have
# more than one device in range you may want to give manually the device
# name so gnokii correctly recognizes it. Use the name that you can see
# in the discovery log when the phone with infrared is in the range of
# your irda port.
# Note that you need to set this for each phone_ section separately. It
# isn't nested from the global section.
# irda_string = Nokia 6610i
# Initlength controls the number of characters sent to the
# phone during initialisation. You can either set it to
# the word "default" or a positive integer.
#
# You can try setting this value if you want to connect
# to the phone quicker. If you've never noticed the
# connection to be slow, it is suggested that you
# leave this alone. Read the initialisation code in fbus-xxxx
# to understand what this changes if you're curious.
initlength = default
# The type of the connection, for IR set this to infrared or irda.
# For the nk6110 driver only infrared is valid for the IrDA connection.
# See Docs/gnokii-ir-howto for more detailes on this.
# If you have 6210/6250/7110 phone and dau9p cable (the one you can
# use with 6100 series and cannot use hardware modem from the phone)
# you may want to use 'dau9p' value to get faster initialization.
# If you use dlr3 or dlr3p cable for nokia phones in FBUS mode (ie.
# you don't use model = AT) you may want to use 'dlr3p' value here.
# Note that it is recommended and currently the best way to use this
# cable with nk6510 driver.
connection = serial
# With DKU-2 cable use the following setting if you want to libusb driver
# (recommended):
# connection = dku2libusb
# or the following setting if you want to use Linux kernel driver
# connection = dku2
# With DKU-5 cable use the following setting
# connection = dku5
# For Bluetooth and AT driver use the following setting
# connection = serial
# For other Bluetooth settings use
# connection = bluetooth
# For infrared connection with phones other than Nokia 6110/6130/6150 use:
# connection = irda
# Don't forget to run: 'irattach irda0 -s' or similiar before running gnokii
# Set this to 'yes' if you want gnokii to set and check the lock file in
# /var/lock directory. It avoids potential conflicts with other serial
# port software (eg. minicom). If you have wrong permissions for the
# directory, a warning will be generated. If you don't want a lockfile, set
# it to 'no'.
use_locking = yes
# Baudrate to use on serial port connections.
# Currently used only by models AT and BIP/CIMD. Defaults to 19200.
serial_baudrate = 9600
# Force waiting after each send character the specified usec time.
# Value -1 forces the fastest 'block' writing,
# value 0 writes each character separately without any explicite waiting,
# other positive values specify the appropriate 1/1000000 sec delaying.
# Siemens M20 requires at least "1"! FIXME: Model-driven autodetection
#serial_write_usleep = 10000
# Force serial port handshaking mode, useful primarily for "AT" model.
# Gnokii "AT" model uses software handshake by default.
# Possible values: hardware (RTS/CTS - 7 wires) or software (XON/XOFF - 3 wires)
handshake = software
# If defined (not commented out by '#') it will quit Gnokii anytime
# when DCD line will drop.
#require_dcd = 1
# If you are using a bluetooth connection, you can specify the rfcomm
# channel number here. Default value is 1.
#rfcomm_channel = 1
# There may happen various timeouts during the communication with the phone.
# This parameter enables the retransmission policy. Ie. if the phone doesn't
# respond, we send the frame again. This happened mainly with the older
# phones. You may want to enable it when you see mysterious timeouts.
# Be very careful with this option. It is suspected to cause phone breakage
# with new DCT4 phones (like Nokia 6100). By default it is switched off
# (sm_retry = 0)
sm_retry = 0
# Run the specified script(s) right after opening and initializing the device
# and before any communication (right before closing for disconnect_script).
# You may find handy to use it to connect your modem to SMS Center
# when using BIP or CIMD protocols
# Non-absolute path is relative to the specific directory where gnokii is run!
#connect_script = /absolute/path/to/gnokii/Docs/sample/cimd-connect
#disconnect_script =
# When sending SMS you can experience timeouts. This is the feature of the
# overloaded SMSCs. The phones waits for the response from the SMSC confirming
# that it received the short message. When the SMSC is DoSed with many requests
# it will take more time to get the response. Adjust it to your needs. The
# value is given in seconds to wait. Defaults to 10 seconds. Set to 0 to wait
# forever.
smsc_timeout = 10
# Set this to 1 if you want to break your phone with xgnokii. Works only
# with few Nokia models and FBUS communication
[xgnokii]
allow_breakage = 0
# Set bindir to point to the location of the various gnokiid binaries.
# In particular ensure that mgnokiidev is in this location, with
# permissions 4750, owned by root, group gnokii. Ensure you
# are in the gnokii group and that the group exists...
[gnokiid]
bindir = /usr/local/sbin/
# Any entries in the following two sections will be set as environment
# variables when running the scripts.
# Handy for use for $VAR substitutions in your chat(8) script.
[connect_script]
TELEPHONE = +32498057892
[disconnect_script]
# The following parameters control how libgnokii handles the debugging messages.
# Currently there are three categories: "debug" controls the libgnokii
# normal debug output, "rlpdebug" controls the debug output of the RLP
# subsystem, and "xdebug" is used by the xgnokii or smsd.
[logging]
# where to log the debug output (on: stderr, off: /dev/null)
debug = on
# where to log the rlp debug output (on: stderr, off: /dev/null)
rlpdebug = off
# where to log X debug output (on: stderr, off: /dev/null)
xdebug = off
--------------------------------debug info ------------------------------
[root@localhost etc]# echo "test" | /usr/bin/gnokii --sendsms +xxxxxxxxxxx
GNOKII Version 0.6.19
LOG: debug mask is 0x1
Config read from file /etc/gnokiirc.
phone instance config:
model: AT
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 9600
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyS0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d | ATZ
write: [ATZ<cr>]
read : [ATZ<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000a
02 41 54 5a 0d 0d 0a 4f 4b 0d | ATZ OK
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d | ATE1
write: [ATE1<cr>]
read : [ATE1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000b
02 41 54 45 31 0d 0d 0a 4f 4b 0d | ATE1 OK
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d | AT+CMEE=1
write: [AT+CMEE=1<cr>]
read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x0010
02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d | AT+CMEE=1 OK
Received message type 00
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d | AT+CGMM
write: [AT+CGMM<cr>]
read : [AT+CGMM<cr><cr><lf>MC39i<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0017
02 41 54 2b 43 47 4d 4d 0d 0d 0a 4d 43 33 39 69 | AT+CGMM MC39i
0d 0a 0d 0a 4f 4b 0d | OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d | AT+CGMI
write: [AT+CGMI<cr>]
read : [AT+CGMI<cr><cr><lf>SIEMENS<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0019
02 41 54 2b 43 47 4d 49 0d 0d 0a 53 49 45 4d 45 | AT+CGMI SIEME
4e 53 0d 0a 0d 0a 4f 4b 0d | NS OK
Received message type 06
Message sent: 0x61 / 0x0009
41 54 2b 43 53 43 53 3f 0d | AT+CSCS?
write: [AT+CSCS?<cr>]
read : [AT+CSCS?<cr><cr><lf>+CSCS: "GSM"<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x61 / 0x001f
02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 | AT+CSCS? +CSC
53 3a 20 22 47 53 4d 22 0d 0a 0d 0a 4f 4b 0d | S: "GSM" OK
Received message type 61
Initialisation completed
Message sent: 0x23 / 0x0009
41 54 2b 43 53 43 41 3f 0d | AT+CSCA?
write: [AT+CSCA?<cr>]
read : [AT+CSCA?<cr><cr><lf>+CSCA: "+32495002530",145<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x23 / 0x002c
02 41 54 2b 43 53 43 41 3f 0d 0d 0a 2b 43 53 43 | AT+CSCA? +CSC
41 3a 20 22 2b 33 32 34 39 35 30 30 32 35 33 30 | A: "+32495002530
22 2c 31 34 35 0d 0a 0d 0a 4f 4b 0d | ",145 OK
Received message type 23
General Data Coding
dcs: 0x0
Length: 0x4
user_data_length: 0x4
ValidityIndicator: 2
user_data: F4F29C0E
Sending
Message sent: 0x63 / 0x000a
41 54 2b 43 4d 47 46 3d 30 0d | AT+CMGF=0
write: [AT+CMGF=0<cr>]
read : [AT+CMGF=0<cr><cr><lf>OK<cr><lf>]
Message received: 0x63 / 0x0010
02 41 54 2b 43 4d 47 46 3d 30 0d 0d 0a 4f 4b 0d | AT+CMGF=0 OK
Received message type 63
PDU mode set
Sending initial sequence
Message sent: 0x64 / 0x000b
41 54 2b 43 4d 47 53 3d 31 38 0d | AT+CMGS=18
write: [AT+CMGS=18<cr>]
read : [AT+CMGS=18<cr><cr><lf>> ]
Message received: 0x64 / 0x000f
01 41 54 2b 43 4d 47 53 3d 31 38 0d 0d 0a 3e | AT+CMGS=18 >
Received message type 64
Got response 0
Sending frame: 07912394052035F011000B912384554770F70000AA04F4F29C0E
Message sent: 0x21 / 0x0035
30 37 39 31 32 33 39 34 30 35 32 30 33 35 46 30 | 07912394052035F0
31 31 30 30 30 42 39 31 32 33 38 34 35 35 34 37 | 11000B9123845547
37 30 46 37 30 30 30 30 41 41 30 34 46 34 46 32 | 70F70000AA04F4F2
39 43 30 45 1a | 9C0E
write: [07912394052035F011000B912384554770F70000AA04F4F29C0E^Z]
read : [^A^4912394052035F011000B912384554770F70000AA04F4F29C0E^Z<cr><lf>+CMS ERROR: 500<cr><lf>]
Message received: 0x21 / 0x0048
04 01 f4 39 31 32 33 39 34 30 35 32 30 33 35 46 | 912394052035F
30 31 31 30 30 30 42 39 31 32 33 38 34 35 35 34 | 011000B912384554
37 37 30 46 37 30 30 30 30 41 41 30 34 46 34 46 | 770F70000AA04F4F
32 39 43 30 45 1a 0d 0a 2b 43 4d 53 20 45 52 52 | 29C0E +CMS ERR
4f 52 3a 20 35 30 30 0d | OR: 500
Received message type 21
SMS Send failed (Unknown error - well better than nothing!!)
Serial device: closing device