Anonymous

htpc ~ # dmesg
Linux version 2.6.24-gentoo-r3 (root@htpc) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP Mon Mar 31 14:17:50 CDT 2008
Command line: root=/dev/hda3 video=uvesafb:800x600-32@60,mtrr,ywrap splash=silent,fadein,theme:gentoo console=tty1
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
 BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
 BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
 BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0001000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000F7790, 0024 (r2 K8T890)
ACPI: XSDT 3FEE30C0, 0044 (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
ACPI: FACP 3FEEA100, 00F4 (r3 K8T890 AWRDACPI 42302E31 AWRD        0)
ACPI: DSDT 3FEE3240, 6E57 (r1 K8T890 AWRDACPI     1000 MSFT  100000E)
ACPI: FACS 3FEE0000, 0040
ACPI: SSDT 3FEEA300, 0118 (r1 PTLTD  POWERNOW        1  LTP        1)
ACPI: MCFG 3FEEA480, 003C (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
ACPI: APIC 3FEEA240, 0074 (r1 K8T890 AWRDACPI 42302E31 AWRD        0)
Scanning NUMA topology in Northbridge 24
CPU has 1 num_cores
No NUMA configuration found
Faking a node at 0000000000000000-000000003fee0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000003fee0000
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   261856
On node 0 totalpages: 261759
  DMA zone: 56 pages used for memmap
  DMA zone: 1617 pages reserved
  DMA zone: 2326 pages, LIFO batch:0
  DMA32 zone: 3524 pages used for memmap
  DMA32 zone: 254236 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PERCPU: Allocating 33376 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 256562
Policy zone: DMA32
Kernel command line: root=/dev/hda3 video=uvesafb:800x600-32@60,mtrr,ywrap splash=silent,fadein,theme:gentoo console=tty1
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
time.c: Detected 2400.080 MHz processor.
Console: colour VGA+ 80x25
console [tty1] enabled
Checking aperture...
CPU 0: aperture @ fed8000000 size 128 MB
Aperture beyond 4GB. Ignoring.
AGP bridge at 00:00:00
Aperture from AGP @ d8000000 size 128 MB (APSIZE f20)
Memory: 1025232k/1047424k available (3367k kernel code, 21804k reserved, 1886k data, 340k init)
Calibrating delay using timer specific routine.. 4806.00 BogoMIPS (lpj=9612001)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12500429
Detected 12.500 MHz APIC timer.
Brought up 1 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000001
  groups: 00000001
net_namespace: 120 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE.PE5C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE.PE6C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:03.1
PCI: Cannot allocate resource region 8 of bridge 0000:00:03.2
PCI: Cannot allocate resource region 8 of bridge 0000:00:03.3
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 128M @ 0xd8000000
Time: tsc clocksource has been installed.
system 00:01: ioport range 0x400-0x47f has been reserved
system 00:01: ioport range 0x500-0x50f has been reserved
system 00:02: iomem range 0x10000000-0x10000fff could not be reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0x290-0x29f has been reserved
system 00:03: ioport range 0x800-0x805 has been reserved
system 00:03: ioport range 0x290-0x297 has been reserved
system 00:0c: iomem range 0xe0000000-0xf0000fff could not be reserved
system 00:0d: iomem range 0xcee00-0xcffff has been reserved
system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
system 00:0d: iomem range 0x3fef0000-0x3ffeffff could not be reserved
system 00:0d: iomem range 0x3fee0000-0x3fefffff could not be reserved
system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x100000-0x3fedffff could not be reserved
system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
  IO window: disabled.
  MEM window: fa000000-fcffffff
  PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.1
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.2
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.3
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:07:00.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:07:00.1
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
  IO window: disabled.
  MEM window: fde00000-fdefffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
  IO window: disabled.
  MEM window: fdd00000-fddfffff
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
PCI: Setting latency timer of device 0000:00:03.0 to 64
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 35
PCI: Setting latency timer of device 0000:00:03.1 to 64
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 39
PCI: Setting latency timer of device 0000:00:03.2 to 64
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 43
PCI: Setting latency timer of device 0000:00:03.3 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:07:00.0 to 64
ACPI: PCI Interrupt 0000:07:00.1[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:07:00.1 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 578k freed
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
Boot video device is 0000:02:00.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
Allocate Port Service[0000:00:02.0:pcie02]
Allocate Port Service[0000:00:02.0:pcie03]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
Allocate Port Service[0000:00:03.0:pcie02]
Allocate Port Service[0000:00:03.0:pcie03]
PCI: Setting latency timer of device 0000:00:03.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.1:pcie00]
Allocate Port Service[0000:00:03.1:pcie01]
Allocate Port Service[0000:00:03.1:pcie02]
Allocate Port Service[0000:00:03.1:pcie03]
PCI: Setting latency timer of device 0000:00:03.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.2:pcie00]
Allocate Port Service[0000:00:03.2:pcie01]
Allocate Port Service[0000:00:03.2:pcie02]
Allocate Port Service[0000:00:03.2:pcie03]
PCI: Setting latency timer of device 0000:00:03.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.3:pcie00]
Allocate Port Service[0000:00:03.3:pcie01]
Allocate Port Service[0000:00:03.3:pcie02]
Allocate Port Service[0000:00:03.3:pcie03]
PCI: Setting latency timer of device 0000:07:00.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:07:00.0:pcie00]
Allocate Port Service[0000:07:00.0:pcie01]
Allocate Port Service[0000:07:00.0:pcie03]
PCI: Setting latency timer of device 0000:07:00.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:07:00.1:pcie00]
Allocate Port Service[0000:07:00.1:pcie01]
Allocate Port Service[0000:07:00.1:pcie03]
Evaluate _OSC returns wrong type
AER service couldn't init device 0000:00:02.0:pcie01 - Run ACPI _OSC fails
Evaluate _OSC returns wrong type
AER service couldn't init device 0000:00:03.0:pcie01 - Run ACPI _OSC fails
Evaluate _OSC returns wrong type
AER service couldn't init device 0000:00:03.1:pcie01 - Run ACPI _OSC fails
Evaluate _OSC returns wrong type
AER service couldn't init device 0000:00:03.2:pcie01 - Run ACPI _OSC fails
Evaluate _OSC returns wrong type
AER service couldn't init device 0000:00:03.3:pcie01 - Run ACPI _OSC fails
Evaluate _OSC returns wrong type
AER service couldn't init device 0000:07:00.0:pcie01 - Run ACPI _OSC fails
Evaluate _OSC returns wrong type
AER service couldn't init device 0000:07:00.1:pcie01 - Run ACPI _OSC fails
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: Thermal Zone [THRM] (40 C)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1f400, 00:15:f2:2d:2b:0d, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
console [netcon0] enabled
netconsole: network logging started
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller (0x1106:0x0571 rev 0x07) at  PCI slot 0000:00:0f.1
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8251 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
    ide0: BM-DMA at 0xfa00-0xfa07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfa08-0xfa0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hdb: IRQ probe failed (0xfffffffffffffcfe)
hdb: IRQ probe failed (0xfffffffffffffcfe)
hda: SAMSUNG SP0411N, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
ieee1394: raw1394: /dev/raw1394 device initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (1 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0x10 (2400 MHz), vid 0x6
powernow-k8:    1 : fid 0xe (2200 MHz), vid 0x8
powernow-k8:    2 : fid 0xc (2000 MHz), vid 0xa
powernow-k8:    3 : fid 0xa (1800 MHz), vid 0xc
powernow-k8:    4 : fid 0x2 (1000 MHz), vid 0x12
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 340k freed
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 20, io base 0x0000f900
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f700
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 23, io base 0x0000f600
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 22, io mem 0xfdffe000
usb 1-2: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:07:01.0 to 64
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24
PCI: Setting latency timer of device 0000:02:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
lirc_dev: IR Remote Control driver registered, major 61 

lirc_atiusb: USB remote driver for LIRC $Revision: 1.66 $
lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: Link keybd as /class/input/input2
input: USB HID v1.10 Keyboard [Link keybd] on usb-0000:00:10.1-1
input: Link keybd as /class/input/input3
input: USB HID v1.10 Mouse [Link keybd] on usb-0000:00:10.1-1
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_atiusb[3]:  on usb1:3
usbcore: registered new interface driver lirc_atiusb
EXT3 FS on hda3, internal journal
Adding 2048276k swap on /dev/hda2.  Priority:-1 extents:1 across:2048276k
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present