# Sample configuration file for kdesvn-build.
#
# To use this sample configuration file, copy it to ~/.kdesvn-buildrc, and then
# edit it to suit your desires.
# Global settings go in this section. They apply to every module unless
# overridden later.
global
# This option controls whether KDE 3.5 or KDE 4.0 is compiled. If you set this
# option to true, kdesvn-build will automatically select the correct branch of
# a module needed to build KDE 3.5 in most cases. Most modules will come from
# the 3.5 branch, arts will come from 1.5, and qt-copy will come from 3.3.
#
# It is always possible to override the default by using the branch, tag, or
# override-url option yourself.
#
# If you set this option to false, or leave it unset, kdesvn-build will build
# /trunk, which corresponds right now with KDE 4.0. If you set this option to
# true, you should also comment out or remove the branch option which is set
# in the "module kdelibs" section below.
#
use-stable-kde false
# binpath controls the value of the PATH environment variable during
# compilation. If you have unusual tools that need to be in the path to build
# KDE, add them here. KDE's and Qt's programs are automatically added.
# If you leave this option blank, it will default to the PATH that kdesvn-build had
# when it was started.
# binpath /bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
# binpath /usr/lib/ccache/bin:/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
# This is the directory that your KDE sources are downloaded to. This
# directory also holds the build and log directories by default.
source-dir ~/kde/sources
# This directory is where everything gets built before it is installed. By
# default it is relative to the value for source-dir. You can specify an
# absolute path if you'd like (begin the path with a slash).
build-dir ~/kde/build
# This is the directory that KDE will end up installed at. The default is
# appropriate for a single-user installation of KDE, which requires no root
# permissions. If you'd like, you can install and use the sudo program to
# install KDE anywhere on your system, in conjunction with the
# make-install-prefix option.
kdedir ~/kde/installed
#
# You can overwrite the installation directory for a given module using
# the per-module "prefix" option. Note that when doing this you need to
# set KDEDIRS, PATH and LD_LIBRARY_PATH to point to both directories,
# and that you should use separate test users or KDEHOME values to separate
# the ksycoca databases. Only set prefix if you know what you're doing.
# If you would like install KDE to the system (DO NOT INSTALL *over* a prior
# installation!), then you'll probably need to use sudo to install everything.
#
# The -S parameter causes sudo to read from standard input (which is redirected
# by kdesvn-build). This means that if sudo has to ask for your password, it
# will fail, you need to configure sudo to be able to run "make install" and
# "unsermake install" without requesting a password.
# make-install-prefix sudo -S
# This is the Qt installation to use to build KDE. The default is qt-copy
# from Subversion. The ${build-dir} option uses whatever you set for
# build-dir to automatically fill in the value.
# For qt-copy users, this is also the directory to install qt-copy to.
# KDE 4.0 may require qt-copy at times instead of a released Qt so it is
# better to use qt-copy for /trunk users.
qtdir ~/kde/sources/qt-copy # Default to installing Qt (Qt 4).
# qtdir ${build-dir}/build/qt-copy # Use built Qt (Qt 3).
# You might want to use your system's built-in Qt already (4.1 or greater for
# KDE 4, 3.3.x for KDE 3.5.) If so, assign the qtdir option appropriately.
# See note above, KDE 4 may require qt-copy at times.
# qtdir /path/to/system/qt
# This is the Subversion server to download the KDE sources from. Developers:
# Don't forget to add your username to the URL if necessary!
# svn-server svn://anonsvn.kde.org/home/kde/trunk/kdesupport
svn-server svn+ssh://flocati@svn.kde.org/home/kde
# disable-agent-check true
# This controls the configure flags passed to every module (except qt-copy) by
# default. If you have module-specific configure flags, they will be placed
# after these flags to allow the module setting to override the global setting.
# This setting only applies to KDE 3 modules.
# configure-flags --enable-debug
# KDE 4 uses CMake. The equivalent to configure-flags is cmake-options. BUT
# the same options will not work, CMake expects them in a different format.
# You should probably not need to use cmake-options however. KDE4_BUILD_TESTS
# is provided as an example.
# cmake-options -DKDE4_BUILD_TESTS:BOOL=ON
cmake-options -DKDE4_BUILD_TESTS:BOOL=ON -DCMAKE_BUILD_TYPE:STRING=debugfull
# These are the compilation flags to use by default when compiling KDE.
# gcc supports a -march option in order to generate specific code for pentium4, athlon-xp,
# etc. See the gcc man page for more information.
# cxxflags -pipe -march=i686 # For standard 32-bit systems.
cxxflags -pipe
# KDE has one of the most extensive translation packages in the world. They
# are stored in the l10n module. kdesvn-build can automatically try to build
# and install languages for you, using this parameter. It should be a list
# of languages to build and install. This option requires the language code
# as present in l10n. You can look these codes up at
# http://i18n.kde.org/teams/
# kde-languages de # German
kde-languages en_US it # French
# kde-languages en_GB cs # British English and Czech
# These are the default options passed to the make command. The default tries
# to build with 2 parallel compiles. If you are using distcc or have SMP, you
# should experiment with setting this value higher for best performance.
make-options -j3
# These are the default options passed to unsermake, which supports some
# options not present with make. The default tries to run 2 compile jobs
# in parallel. The -p option is used to display progress information.
# unsermake can only be used with KDE 3.
# unsermake-options --compile-jobs=2 -p
# unsermake is used by default for KDE 3 modules. However, you may get tired
# of kdesvn-build updating unsermake all the time. In that case, uncomment the
# following. NOTE: You are responsible for updating unsermake after that by
# going to its directory and running 'svn up' when needed. If you have not yet
# downloaded unsermake let kdesvn-build update it before uncommenting.
# use-unsermake self
# You can use the set-env option to add values to the build environment.
set-env LDFLAGS -Wl,-O1 # Optimize the linker, takes longer.
# If you use software which requires pkg-config, and you need to add entries
# to your pkg-config path, you can also use set-env for that. Some broken
# systems require you to set this to find e.g. glib.
# set-env PKG_CONFIG_PATH /opt/gnome/lib/pkgconfig
end global
# qt-copy is a copy of Trolltech's Qt, optionally with some bugfixes and
# optimizations added. It is the easiest way to get Qt if you don't already
# have it (and you don't want to use your distro's tools to install it.)
module qt-copy
configure-flags -qt-gif -debug -fast -no-exceptions -no-separate-debug-info -system-libpng -system-libjpeg -system-zlib -qdbus -webkit -no-phonon -nomake examples -nomake demos
apply-qt-patches true # Works with Qt 3 and 4, recommended as well.
make-options -j3
end module
# kdesupport contains taglib and QCA, and the Strigi library required for
# kdelibs in KDE 4. taglib is required for JuK, amarok, and the meta info
# reader for music files in Konqueror.
module kdesupport
end module
# kdelibs are the base KDE libraries needed by all KDE applications.
module kdelibs
# KDE 3 syntax:
# configure-flags --enable-sendfile --enable-mitshm
# KDE 4 uses CMake, if you need to pass options to the cmake command, use this
# option:
# cmake-options -DKDE4_BUILD_TESTS:BOOL=ON
# If you're a programmer you may want to build the API docs. Note that
# it takes some time, and DOES NOT WORK with unsermake (or CMake, yet). :(
# apidox true
end module
# If you are not using KDE 4 then uncomment or remove this module. It is required
# before kdebase in KDE 4.
module kdepimlibs
end module
# kdebase contains useful general-purpose programs, normally people would
# expect a usable desktop to have these.
module kdebase
#configure-flags --with-pam --with-shadow
end module
# kdemultimedia contains JuK, noatun, Kaboodle, and other KDE multimedia
# applications. It does not include amarok, which is in extragear/multimedia
module kdemultimedia
end module
# ... Well, they're games. ;)
module kdegames
end module
## Note: The following modules may not have been ported to KDE 4 yet, and may
# have changed significantly from their KDE 3 counterparts as well. Because
# of this, they are commented out, uncomment it if you want to build it.
# kdesdk is a useful module for software developers. It is where kdesvn-build
# is developed.
module kdesdk
end module
# kdenetwork has Kopete and other useful applications for the Internet and
# other networks.
module kdenetwork
end module
module kdeaccessibility
end module
module kdeartwork
end module
# kdeadmin has system administration tools for your computer.
module kdeadmin
# KDE3 configure flags:
# configure-flags --with-shadow --with-pam=yes
end module
# kdebindings is useful for software developers, and for those who wish to run
# some KDE programs that don't use C++. The python bindings are not included
# by default as they never build for me. If you'd like to build all the
# bindings, comment out the checkout-only option below.
#
# This module appears to be on its way to being ported to Qt 4, stay tuned.
#module kdebindings
# checkout-only admin dcopc kalyptus smoke qtruby korundum kjsembed dcoppython
# kdebindings will probably need to use the following option to install successfully.
# You must configure the sudo program first to allow for passwordless operation.
# make-install-prefix sudo
#end module
# kdepim contains KMail, Kontact, KOrganizer, and other insanely useful
# programs that help you keep track of things.
module kdepim
# KDE3 configure flags:
# configure-flags --disable-exchange
end module
# kdeutils has miscellaneous programs which can be useful. You probably won't
# die if you remove this from the config file though.
module kdeutils
end module
# kdegraphics contains various programs useful for graphics editing. It
# doesn't include Krita, which is part of KOffice, but it is worth it just for
# KolourPaint.
module kdegraphics
end module
# Contains nifty diversions of time, which generally aren't games.
module kdetoys
end module
# Educational programs. Some are actually quite fun even if you're not trying
# to learn anything.
module kdeedu
end module
# The KDE Office Suite. Includes a pretty expansive collection of programs.
# It is rather large, so you can cut download and build times by removing it
# from this file.
module koffice
# branch 1.6 # The last released version for KDE 3.
end module
## A prerequisite for kdevelop other modules using the kdevelop platform, like
# kdewebdev
module kdevplatform
end module
## The KDevelop IDE, useful for developing all kinds of programs. If you don't
# plan on being a software developer you can save time by removing this from
# your configuration.
#
# Note: KDevelop appears to have a port started towards KDE 4. It may be
# usable by now.
module kdevelop
use-unsermake false
end module
# Includes Quanta Plus and other web design tools.
module kdewebdev
end module
# Modules in extragear and playground can also be added.
#
# To see what you can find in the various modules, browse
# http://websvn.kde.org/trunk/extragear and
# http://websvn.kde.org/trunk/playground
module extragear/libs
end module
module extragear/multimedia
end module
module extragear/base
end module
module extragear/graphics
end module
module extragear/network
end module
module extragear/plasma
end module
module extragear/office
end module
module extragear/pim
end module
module extragear/sdk
end module
module extragear/security
end module
module extragear/sysadmin
end module
module extragear/utils
end module
module playground/accessibility
end module
module playground/artwork
end module
module playground/base
end module
module playground/bindings
end module
module playground/devtools
end module
module playground/edu
end module
module playground/games
end module
module playground/graphics
end module
module playground/ioslaves
end module
module playground/libs
end module
module playground/multimedia
end module
module playground/network
end module
module playground/office
end module
module playground/pim
end module
module playground/sysadmin
end module
module playground/utils
end module