CPU: Galileo GT64260/MPC7410
Version: 5.4.1
BSP version: 1.2/3
Creation date: Feb 12 2004, 13:52:23
sysEnetAddrGet: Returning the following MAC adrs 00:0D:28:F4:EF:C0
Starting quick FLASH File System test...
Starting wear leveling system for partition 3
please wait for completion message
Start wear leveling COMPLETED
Starting wear leveling system for partition 4
please wait for completion message
Start wear leveling COMPLETED
Attaching to ATA disk device...
usrAtaConfig: mount point is /ata4
Adding AUTOSYNC...done.
PASSED
Boot Code Version: 3.5.1-K9
Boot Code checksum is: 05E20AC2
Press 'Escape' key to stop auto-boot...
0
auto-booting...
sysEnetAddrGet: Returning the following MAC adrs 00:0D:28:F4:EF:C0
boot device : ata=0,00
unit number : 0
processor number : 0
file name : /ata0/vxWorks
flags (f) : 0x0
startup script (s) : /ata0/NuSpeed.start
other (o) : fei
Attaching to ATA disk device...
usrAtaConfig: mount point is /ata0
Adding AUTOSYNC...done.
Loading /ata0/vxWorks...1757796
Starting at 0x10000...
Starting wear leveling system for partition 3
please wait for completion message
Start wear leveling COMPLETED
Starting wear leveling system for partition 4
please wait for completion message
Start wear leveling COMPLETED
Host Name: bootHost
Target Name: vxTarget
User: target
Attaching network interface fei0...
sysEnetAddrGet: Returning the following MAC adrs 00:0D:28:F4:EF:C0
done.
No inet address specified for interface fei.
Attaching network interface lo0... done.
Booted from device ata=0,00
Loading version 07 secure options... done.
Timezone is 'GMT'
DOS FS date/time hook installed.
usrAtaConfig: mount point is /ata0
Adding AUTOSYNC...Loading symbol table from /ata0/vxWorks.sym ...done
C i s c o S y s t e m s
|| ||
|| || Cisco Systems, Inc.
|||| |||| 170 West Tasman Drive
..:||||||:..:||||||:.. San Jose, California 95134-1706
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
CPU: Galileo GT64260/MPC7410. Processor #0.
Memory Size: 0xe800000. BSP version 1.2/3.
Executing startup script /ata0/NuSpeed.start ...
cd "/ata0/"
value = 0 = 0x0
ld < sysInit.out
value = 227635952 = 0xd9172f0 = IpcDgram type_info node + 0x90
#putenv("DISABLE_DIAGS")
sysInit
Attaching to ATA disk device...
usrAtaConfig: mount point is /ata2
Adding AUTOSYNC...
Attaching to ATA disk device...
usrAtaConfig: mount point is /ata3
Adding AUTOSYNC...
Attaching to ATA disk device...
usrAtaConfig: mount point is /ata4
Adding AUTOSYNC...
sysEnetAddrGet: Returning the following MAC adrs 00:0D:28:F4:EF:C2
ourip for switch = 2.0.0.1
fcSwIp = 2.0.0.2
ourIp for CP<->DP = 2.0.0.1
Starting the Execution Engine
Starting the SW Manager
Loading version 3.5.1-K9
Loading crashDump.out 85aa564c0c77cbae8d5159d7f5007010 11808 [ OK ]
Loading snmp_trapfuncs.out 350788163f5d3a2c02510fb1dcf8d0c0 573 [ OK ]
Loading nuEventsFilter.out dd80fe58468a6cbd9263f7e04890f5f6 1984 [ OK ]
Loading nuEventsCommon.out 02dc127b86b14fe84563723bda319d8e 5748 [ OK ]
Loading nuEvents.out da607a29d255f73bab64c4fd7fec20cf 16575 [ OK ]
Loading ha.out 9143207eabb4e87494149248a0cdc358 42661 [ OK ]
Loading confNode.out 420776c29d5167ca5b741e5016f11b92 20961 [ OK ]
Loading lzs.out 5d510d557439867ca0f52aa179c6f246 9687 [ OK ]
Loading authServer.out 31c958ffcfe68e68ade95cbcf35e0bab 34426 [ OK ]
Loading drv.out 7d6d5f2f8d23485cf54cf7469ff2d5c6 36305 [ OK ]
Loading geBase.out 3140505c38c19c79437c587b14d18577 11078 [ OK ]
Loading i8254x.out 0078a80378b53418abd4b2614b9a97c2 58323 [ OK ]
Loading ipSec.out d9f8dbf1fb47476c26c69a671afdfebb 6183 [ OK ]
Loading qlogicBase.out 8c9564b7d8a5c83cd09fdcd8d1ab30ed 5475 [ OK ]
Loading qlogic.out 956c279f24b2375716ac8dea5e320806 479935 [ OK ]
Loading qlogicCpp.out da76a2870939cf0385b3ec551893477a 17273 [ OK ]
Loading qlptBase.out eecbca50084311e001943d7f7ce500d2 2712 [ OK ]
Loading qlptCpp.out 8b303edeceb5238342428ed9f8dc6cb9 6276 [ OK ]
Loading qlptDpp.out fb247353b2a3b3562cd7f206ca07b5e1 110992 [ OK ]
Loading encap.out 8de8541120ebeac4577888c700e13c2f 8272 [ OK ]
Loading smlApi.out eaefc4f3c179c461beb342273a026f79 31258 [ OK ]
Loading vtp.out 36bd7071d0da8648f048688d97431331 17377 [ OK ]
Loading sysDpp.out 7d6e9e6eec34b414e306488c6093af10 11177 [ OK ]
Loading scsiTargetFE.out 106c2abaa3a993335b95b9a32d95baee 106342 [ OK ]
Loading scsiTcpAuth.out 8167c9f9824b7a0bdb90549a0e62fcee 12427 [ OK ]
Loading slpcommon.out b9ea761ccf92d546898a243383c3cfba 12045 [ OK ]
Loading libslp.out d7987618f9808445e1789237880f7eba 13610 [ OK ]
Loading slpattr.out e84378ab6ab6b4a3fab094566da26f84 11424 [ OK ]
Loading slpd.out b403eaa620adc2d6e6fe8288ea8c89f0 37583 [ OK ]
Loading slptool.out 2362be8a913b3634e2cd9e989e977729 4225 [ OK ]
Loading iSns.out 89fdf67035d990b58b87879f07e20e50 29629 [ OK ]
Loading scsiTcpServer.out 7fe8379dc40f8669bf7666147ef1ab77 148902 [ OK ]
Loading ttcp.out e8eb9fb5d0d881a608d2131e325c37e3 22177 [ OK ]
Loading confMgmt.out 1b6963392f202905edc06ba0d07d76d1 8364 [ OK ]
Loading hdwmon.out 694864860528677caa78772c676d941f 17418 [ OK ]
Loading diagMon.out 435ac2abba96079699bbfed0b4ad3d8b 47617 [ OK ]
Loading diagCppUtils.out 05383e5e5fcaf27135598bde039ca871 8726 [ OK ]
Loading diagCppTests.out d57d7ca6d171f933ebea25af6c4d33f7 10633 [ OK ]
Loading diagDppTests.out 802af15766f5168958631a3f78c15189 32017 [ OK ]
Loading sn5428TestTable.out 865df254c241c78649f6eb8a2950e45b 1707 [ OK ]
Loading confXML.out bea33eea2c10f749033a08b71ff9a725 51853 [ OK ]
Loading confObj.out e2bf552703095905a9480cdf43af9ef7 180290 [ OK ]
Loading openssl.out 4e0a5c9e792cc22035dde2ff28208555 519341 [ OK ]
Loading sshmgr.out 817744fd131338e815b6f260a491d3e1 6603 [ OK ]
Loading clusterApp.out 4d3c8e7fe317ae2a379f00c258206a4f 25776 [ OK ]
Loading cdp.out f4fa5f26d6ff32b0af5b08ac2d9fabda 27559 [ OK ]
Loading systemApp.out 1e266441140058cb36c323da7095c002 146274 [ OK ]
Loading ipRouter.out 015bb31755bc19d4b8e837301d1cc8a0 16411 [ OK ]
Loading srMon.out 7b452f8b1ecba6e73ada300130948053 16777 [ OK ]
Loading scsiRouter.out 70dc492b9a6e9d55b6864a9f94336bb6 107932 [ OK ]
Loading frameRacer.out 33b1591e4632e8394414bae4eee69509 26194 [ OK ]
Loading authServerApp.out b1d4e78ca5eec645ef60a87d69d4a58e 18950 [ OK ]
Loading fcSwApp.out 7a31fa1fddcd233cb16183b35848e856 66737 [ OK ]
Loading fdisk.out 9741081d6a391631d8b779f5fc5b63b6 14387 [ OK ]
Loading sysMon.out 569f77de964969f7e0f77425bcf4aa76 6812 [ OK ]
Loading ui.out c5878e26fd63162c628e2a1419655fbd 1670531 [ OK ]
Loading snmp_util.out d48e95fef76b744ef74709870d97d951 3221 [ OK ]
Loading mib2.out 963a5fdf9debc8aacdb2245b0258545d 27400 [ OK ]
Loading ifx.out c4090a842ceaa182d526a2537f2576b1 9796 [ OK ]
Loading ether.out d68e1d4134957ba4f983d557501cd855 3885 [ OK ]
Loading mau_if.out 2e3d9ce89e839d316ecf94529705cdad 5325 [ OK ]
Loading mau_neg.out d27f59fe9aea163e2793fc7890443f05 3304 [ OK ]
Loading entity.out b02befb0dd1f06c701ea06f4e345259b 8974 [ OK ]
Loading entity_sensor.out 2495f94bdf42db5d50a88b17d589d5e0 5908 [ OK ]
Loading entity_ext.out 0b563d2360461c140b49354f3df82610 3120 [ OK ]
Loading entity_fru.out 50d69791fb7a3d4a4e6143d3cec4ba4a 5432 [ OK ]
Loading cdp_snmp.out b40e68cd32e7200df4e64954e92b94d4 7154 [ OK ]
Loading ips_auth.out 19048ae14bf11a666d604c04c3a36f66 10201 [ OK ]
Loading iscsi_mib.out e14a138b9992e2580d9a0cffe3dc84f2 26046 [ OK ]
Loading fcmgmt.out fb9a1c04748ca5d63c00426b62d3a485 21517 [ OK ]
Loading fcmgmt_fcsw.out faa6076af0982f79fa91ad652edef75b 25248 [ OK ]
Loading syslog_mib.out 8e91a3acd2575b9c2576ff438a9ffccb 10489 [ OK ]
Loading config_copy.out 0581dfe086f8baacd3e4ef6ee3961613 13477 [ OK ]
Loading srMonApp.out 7bb721db6b66ce9a83e63124a1c75041 2445 [ OK ]
Loading snmpApp.out d00907ec64c2e05b522d47a0473bf58a 4224 [ OK ]
Loading complete.
SystemApp initing...
Mar 16 15:48:21: %SYSLOG-4-NESR: System restart - System Power-On [0]
Test Defaults Restored.
Testing is underway...
Starting pass number 1
Voltage margin selected = Nominal
v0(gnd) = 00.00v v1(1.8v-GT64260) = 01.78v
v2(1.8v-processor) = 01.78v v3(2.5v-L2 cache) = 02.46v
v4(3.3v-std logic) = 03.34v v5(5.0v-fans & pwr cnvtrs) = 05.00v
v6(12.0v-fans) = 11.88v
Starting -> 1 - General PCI Configuration space Test...
..................PMC slot 1 contains Vendor ID=0x8086, Device ID=0x1008, busNo=0x1, devNo=0x3
..................PMC slot 2 contains Vendor ID=0x8086, Device ID=0x1008, busNo=0x1, devNo=0x2
..................PMC slot 3 contains Vendor ID=0x1077, Device ID=0x2320, busNo=0x0, devNo=0x2
..................PMC slot 4 contains Vendor ID=0x1077, Device ID=0x2320, busNo=0x0, devNo=0x3
Passed
Starting -> 2 - FC ISP DMA Test...
..................Testing fci1 in slot 3...
..................Testing fci2 in slot 4...
Passed
Starting -> 3 - FC ISP DMA Address Test...
..................Testing fci1 in slot 3...
..................Testing fci2 in slot 4...
Passed
Starting -> 4 - FC ISP POST firmware Test...
..................Testing fci1 in slot 3...start: firmware rev 3.2.23
..................Testing fci2 in slot 4...start: firmware rev 3.2.23
Passed
Starting -> 5 - FC ISP Internal Loopback Test...
..................Testing fci1 in slot 3...
..................Testing fci2 in slot 4...
Passed
Starting -> 7 - Gigabit Ethernet Packet Buffer Memory Test...
..................Testing ge1 in slot 1...
..................Testing ge2 in slot 2...
Passed
Starting -> 9 - Gigabit Ethernet Internal TXR Loopback Test...
..................Testing ge1 in slot 1...
..................Testing ge2 in slot 2...
Passed
Starting -> 10 - Gigabit Ethernet Address Lines Test...
..................Testing ge1 in slot 1...
..................Testing ge2 in slot 2...
Passed
Starting -> 13 - 10/100 Ethernet Internal Loopback Test...
sysEnetAddrGet: Returning the following MAC adrs 00:0D:28:F4:EF:C1
Passed
Starting -> 14 - NVRAM Memory Test...Passed
Starting -> 15 - Real Time Clock Test...Passed
Starting -> 16 - LM80 Fan/Temp/Voltage Monitors Test...Passed
Starting -> 17 - Leds Test...Passed
Starting -> 18 - DUART Test...Passed
Starting -> 19 - FC switch startup Test...Waiting for switch to reboot
Passed
Starting -> 22 - FC ISP External Loopback to FC Switch Ports Test...
..................Testing fci1 in slot 3...
..................Testing fci2 in slot 4...
Passed
Press 'Escape' key to abort normal startup...
0
detachFc driver=0xcbeca60
detachFc driver=0xcbc7e78
Mar 16 15:52:34: %UI-5-CMSARCM: System Application registered with Configuration Management
Mar 16 15:52:34: %CONF-3-CUOCF: Task D921A68 tShell: Unable to open configuration file: /ata3/conf/system/phyPort/pmc/fci1/fci1.conf Tag: snmpLinkUpDown
Mar 16 15:52:34: %CONF-3-CUOCF: Task D921A68 tShell: Unable to open configuration file: /ata3/conf/system/phyPort/pmc/fci1/fci1.conf Tag: autolearn
Mar 16 15:52:34: %UI-5-NMAOOI: Address 2.0.0.1/24 is now operational on interface fei2
Mar 16 15:52:36: %FC-fci1-5-QFLRCABE: LoadRiscCode: Allocated buffer for firmware load. Addr = 0xc9a8000
start: firmware rev 3.2.23
Mar 16 15:52:36: %CONF-3-CUOCF: Task D921A68 tShell: Unable to open configuration file: /ata3/conf/system/phyPort/pmc/fci2/fci2.conf Tag: snmpLinkUpDown
Mar 16 15:52:36: %CONF-3-CUOCF: Task D921A68 tShell: Unable to open configuration file: /ata3/conf/system/phyPort/pmc/fci2/fci2.conf Tag: autolearn
Mar 16 15:52:39: %FC-fci2-5-QFLRCABE: LoadRiscCode: Allocated buffer for firmware load. Addr = 0xc93b000
Mar 16 15:52:39: %FC-fci1-5-QFPAELU: processAsyncEvent: Loop Up
Mar 16 15:52:39: %FC-fci1-5-QNIU: Interface fci1 Up
start: firmware rev 3.2.23
Mar 16 15:52:39: %GE-ge2-2-ISSMGES: SFP Transceiver not present
Mar 16 15:52:40: %FC-fci2-5-QFPAELU: processAsyncEvent: Loop Up
Mar 16 15:52:40: %FC-fci2-5-QNIU: Interface fci2 Up
Mar 16 15:52:42: %UI-3-SASSSC: Unable to save the System subnode (phyPort) configuration
Mar 16 15:52:42: %UI-3-SASSC: Unable to save the System configuration
Mar 16 15:52:42: %HA-5-HAEWAIN: HA initing...
Mar 16 15:52:42: %HA-1-HEHIHCANB: HA_configure_interface: HA failed to configure network interface 0
Mar 16 15:52:42: %HA-1-HEHIHCANB: HA_configure_interface: HA failed to configure network interface 1
Mar 16 15:52:42: %HA-1-HEHINMHI: HA failed to initialize: Neither MGMT/HA interface is valid
Mar 16 15:52:42: %CONF-5-CACAI: Cluster App initing...
Mar 16 15:52:42: %UI-5-CMCARCM: Cluster Application registered with Configuration Management
Mar 16 15:52:42: %UI-5-CMASARCM: Authentication Server Application registered with Configuration Management
Mar 16 15:52:42: %UI-5-CMSRRCM: SCSI Router registered with Configuration Management
Mar 16 15:52:42: %ISCSI-5-SRRSATH0: Scsirouter App initing...
Mar 16 15:52:42: %SNMP-5-SASAI: SnmpApp initing...
Mar 16 15:52:42: %GE-ge1-5-IIU: Interface up
Mar 16 15:52:42: %UI-5-SV: Switch Version: [V1.5.1.10-0]
Mar 16 15:52:43: %UI-5-FCSW: FC Software Application registered with Configuration Management
Mar 16 15:52:43: %FC-5-SMLTS: Starting FCSW Event Mgr
Mar 16 15:52:43: %FC-5-SMLTB: FCSW Event Mgr started
Mar 16 15:52:44: %FC-5-SMLLG: Logging FCSW Events
Mar 16 15:52:50: %FC-fci1-2-QFPAELD: processAsyncEvent: Loop Down
Mar 16 15:52:50: %FC-fci1-2-QNID: Interface fci1 Down
Mar 16 15:52:50: %FC-4-TopologyOperChange: TopologyOperChange;0;0;0;0
Mar 16 15:52:51: %FC-fci1-5-QFPAELU: processAsyncEvent: Loop Up
Mar 16 15:52:51: %FC-fci1-5-QNIU: Interface fci1 Up
Mar 16 15:52:51: %FC-4-TopologyOperChange: TopologyOperChange;1;0;0;0
Mar 16 15:52:51: %FC-5-PortStateChange: PortStateChange;2;0;0;0;Online
Mar 16 15:52:57: %FC-fci2-2-QFPAELD: processAsyncEvent: Loop Down
Mar 16 15:52:57: %FC-fci2-2-QNID: Interface fci2 Down
Mar 16 15:52:57: %FC-fci2-5-QFPAELU: processAsyncEvent: Loop Up
Mar 16 15:52:57: %FC-fci2-5-QNIU: Interface fci2 Up
SystemApp starting...
CDP started
Mar 16 15:52:59: %UI-5-CMFRRCM: FCIP registered with Configuration Management
Mar 16 15:52:59: %HA-5-CACAS: Cluster App starting...
Mar 16 15:52:59: %VTP-5-VVDNC1: VTP domain name cleared
Mar 16 15:52:59: %CDP-5-CCTS: CDP task STARTED
Mar 16 15:53:00: %CONF-5-CCXCF2: New Cluster '28f4efc0' config notice sent to HA
Mar 16 15:53:00: %HA-5-CARH: Registering cluster/28f4efc0 with HA
Mar 16 15:53:00: %SNMP-5-SASAS: SnmpApp starting...
Mar 16 15:53:00: %FC-5-PortOperChange: PortOperChange;3;0;0;0
Mar 16 15:53:00: %ISCSI-5-SASAS: ScsiRouter monitor App starting...
Mar 16 15:53:00: %UI-5-EWASR: EwSysApp starting...
Mar 16 15:53:00: %UI-5-SSSHS: Starting SSH service
Mar 16 15:53:00: %UI-5-TASS: Starting Telnet service
Mar 16 15:53:00: %HA-5-HAEWASR: HA starting...
Mar 16 15:53:00: %UI-5-EWSB: Starting EmWeb R6_1_0 Port 80 (buffers:12800 size:128)
Mar 16 15:53:00: %UI-5-EWSSSL: Starting SSL OpenSSL 0.9.6e 30 Jul 2002 Port 443
Mar 16 15:53:02: %FC-4-TopologyOperChange: TopologyOperChange;5;0;0;0
Mar 16 15:53:03: %FC-5-PortStateChange: PortStateChange;6;0;0;15;Online
Mar 16 15:53:04: %FC-1-ZoningChange: ZoningChange;10;0;0;0
reset stdin to /pipe/dummy fd = 38
shell restarted.
Done executing startup script /ata0/NuSpeed.start
->
Starting serial session...
Cisco SN 5428-2-K9 Storage Router
Welcome to the initial system configuration script. This script is
intended to help you perform a minimal configuration needed to make
the SN 5428-2-K9 Storage Router operational, after which it will be rebooted.
Press Enter to proceed.