DHCPc: Sending Discover packet; client id htype=1, value=00:00:00:00:00:00
DHCPc: Received an Offer from DHCP server 00:01:5c:22:8a:c2 (73.45.0.1); lease client id htype=1, value=00:00:00:00:00:00
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:00:00:00:00:00
DHCPc: Sending Request packet; client id htype=1, value=00:00:00:00:00:00
DHCPc: Received an Ack from DHCP server 00:01:5c:22:8a:c2 (73.45.0.1); lease client id htype=1, value=00:00:00:00:00:00
Current IP address is default 169.0.0.1; removing existing route...
0x00002ff8 ['DHCP Client Thread' id=0x807c8fa0] BcmVxIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = x.x.x.x
Subnet Mask = 255.255.248.0
Router = x.x.x.x
DHCP completed successfully!
DHCP Settings:
Client Id = htype=1, value=00:00:00:00:00:00
State = Bound (4)
Static Lease = false
AutoConfig Mode = IP, Subnet and Router
XID = 0x3d06
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:01:5c:22:8a:c2
My offered IP address = x.x.x.x
(1) Subnet Mask = 255.255.248.0
(3) Router IP address = x.x.x.x
(54) DHCP Server IP address = 68.87.72.10
(82) Relay Agent IP address = x.x.x.x
TFTP Server IP address = 68.87.72.12
CM Configuration file = 'd11_m_sb5100_speedtier_c01.cm'
(2) UTC Time Offset = -18000 seconds
(4) Time Server IP address = 68.87.72.12
(7) Log Server IP address = 0.0.0.0
(51) Lease time = 591269 seconds
(58) T1 (renew) = 295634 seconds
(59) T2 (rebind) = 517360 seconds
Lease is infinite = false
CmSnmpAgent::IpAddressAcquiredEvent for SB5100 CM Agent
IP addr = x.x.x.x
SB5100 CM Agent ConfigIp: Ip=x.x.x.x, Subnet=255.255.248.0, Gateway=x.x.x.x
CM> Starting Time Of Day...
0x000033e0 ['CmDocsisIpThread' id=0x807c3b50] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 68.87.72.12
Connecting to ToD server 68.87.72.12...
Sending UDP ToD request to server...
Not logging event ID 2223898627, control for level 7 is 0.
CM> UTC returned by ToD server 3415735884; UTC offset -18000
Current system time -> FRI MAR 28 18:31:24 2008
System start time -> FRI MAR 28 18:31:12 2008
Starting Tftp of configuration file...
DHCP is enabled but FORCE the use of non-vol specified config file!...
Opening file 'ddos.cm' on x.x.x.x...
tftpInit: Tftp outbound interface flag (1024)
Connected to x.x.x.x [69]
mode set to octet.
getting from x.x.x.x:ddos.cm [octet]
tftpSend: Attempt #(1) Backoff (2) tickCount (1371) blkReply (1)
CM> .1.2.1.69.1.6.4.1.2.60 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.5.60 to 3 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.60 to 6 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.60 to 445 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.15.60 to 445 OK.
60 TLV-11's OK.
SB5100 CPE Agent disabling management.
SB5100 CPE Agent defering traps.
MAX CPE per CM is being set to 2
Sending a REG-REQ to the CMTS...
Time Of Day completed...
BcmSnmpAgent::SystemTimeChangeEvent for SB5100 CM Agent
Tftp read ZERO bytes, may have reached end of file.
Config file was read! IP Initialization completed...
NonVolDeviceDriver::NonVolDriverWrite: WARNING - Dynamic NonVol is 'full' - no more free segments; need to erase and start over!
NonVolDeviceDriver::NonVolDriverWrite: WARNING - Erasing flash region; a power failure here will cause settings to be lost!
Set 1.3.6.1.2.1.69.1.3.3.0 to 2 OK.
Set 1.3.6.1.2.1.69.1.2.1.2.1 to 68.87.64.0 OK.
Set 1.3.6.1.2.1.69.1.2.1.3.1 to 255.255.192.0 OK.
Set 1.3.6.1.2.1.69.1.2.1.4.1 to hDaFHJG7 OK.
Set 1.3.6.1.2.1.69.1.2.1.5.1 to 3 OK.
Set 1.3.6.1.2.1.69.1.2.1.6.1 to 40 00 OK.
Set 1.3.6.1.2.1.69.1.2.1.7.1 to 4 OK.
Set 1.3.6.1.2.1.69.1.2.1.2.2 to 76.96.0.0 OK.
Set 1.3.6.1.2.1.69.1.2.1.3.2 to 255.255.128.0 OK.
Set 1.3.6.1.2.1.69.1.2.1.4.2 to hDaFHJG7 OK.
Set 1.3.6.1.2.1.69.1.2.1.5.2 to 3 OK.
Set 1.3.6.1.2.1.69.1.2.1.6.2 to 40 00 OK.
Set 1.3.6.1.2.1.69.1.2.1.7.2 to 4 OK.
Set 1.3.6.1.2.1.69.1.2.1.2.6 to 24.128.113.128 OK.
Set 1.3.6.1.2.1.69.1.2.1.3.6 to 255.255.255.240 OK.
Set 1.3.6.1.2.1.69.1.2.1.4.6 to 1Mcl0c41$ OK.
Set 1.3.6.1.2.1.69.1.2.1.5.6 to 2 OK.
Set 1.3.6.1.2.1.69.1.2.1.6.6 to 40 00 OK.
Set 1.3.6.1.2.1.69.1.2.1.7.6 to 4 OK.
Set 1.3.6.1.2.1.69.1.2.1.2.7 to 24.34.240.0 OK.
Set 1.3.6.1.2.1.69.1.2.1.3.7 to 255.255.240.0 OK.
Set 1.3.6.1.2.1.69.1.2.1.4.7 to 1e6ukpf4 OK.
Set 1.3.6.1.2.1.69.1.2.1.5.7 to 3 OK.
Set 1.3.6.1.2.1.69.1.2.1.6.7 to 40 00 OK.
Set 1.3.6.1.2.1.69.1.2.1.7.7 to 4 OK.
Set 1.3.6.1.2.1.69.1.2.1.2.8 to 24.34.224.0 OK.
Set 1.3.6.1.2.1.69.1.2.1.3.8 to 255.255.240.0 OK.
Set 1.3.6.1.2.1.69.1.2.1.4.8 to xygi7vnz OK.
Set 1.3.6.1.2.1.69.1.2.1.5.8 to 2 OK.
Set 1.3.6.1.2.1.69.1.2.1.6.8 to 40 00 OK.
Set 1.3.6.1.2.1.69.1.2.1.7.8 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.2.10 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.5.10 to 3 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.10 to 17 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.10 to 135 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.15.10 to 139 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.2.11 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.5.11 to 3 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.11 to 6 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.11 to 135 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.15.11 to 139 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.2.20 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.20 to 17 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.20 to 68 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.15.20 to 68 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.2.30 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.5.30 to 3 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.30 to 17 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.30 to 520 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.15.30 to 520 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.2.40 to 4 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.5.40 to 2 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.11.40 to 6 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.14.40 to 1080 OK.
Set 1.3.6.1.2.1.69.1.6.4.1.15.40 to 1080 OK.
Set 1.3.6Not logging event ID 2223898626, control for level 7 is 0.
Not logging event ID 2223898625, control for level 7 is 0.
Received a REG-RSP message from the CMTS...
0x00003bce ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.1 config file!
Registration complete!
Process CVC
Co-signer CVC verified
CVC's validated
DOCSIS CoS/QoS rate shaping enable is now true
CmSnmpAgent::CmOperationalEvent for SB5100 CM Agent
CmSnmpAgent operating in 1.1 mode, including docsQos, excluding docsBpi
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5100 CM Agent setting V1/V2 view to docsisNmAccessView
SB5100 CM Agent enabling management.
SB5100 CM Agent sending deferred traps...
Done w/ deferred traps.
SB5100 CPE Agent setting V1/V2 view to docsisNmAccessView
0x00003c1e ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchBpkm: (CmDocsisCtlThread) BPKM enabled. starting BPKM key requests.
SB5100 CM Event Log sending deferred async messages...
Done w/ deferred msgs
Not logging event ID 66040100, control for level 7 is 0.
CM> BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.
mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
0x00003e12 ['IGMP Thread' id=0x807b7580] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread)
Stopping DHCP server...
Leaving standby mode!
Stopping DHCP server...
Not logging event ID 2223898628, control for level 7 is 0.
Not logging event ID 2223898633, control for level 7 is 0.