Unnamed

dmesg
[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[4294667.296000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[4294667.296000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[4294667.296000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[4294667.296000] 127MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f4fa0
[4294667.296000] On node 0 totalpages: 262128
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 225280 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 32752 pages, LIFO batch:7
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: RSDP (v000 XPC                                   ) @ 0x000f9040
[4294667.296000] ACPI: RSDT (v001 XPC    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[4294667.296000] ACPI: FADT (v001 XPC    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff30c0
[4294667.296000] ACPI: MADT (v001 XPC    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff6c40
[4294667.296000] ACPI: DSDT (v001 XPC        SB61 0x00001000 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x408
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:2 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 15:2 APIC version 20
[4294667.296000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz preseed/file=/cdrom/preseed/kubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash --
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 2606.585 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294669.507000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294669.508000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.532000] Memory: 1028688k/1048512k available (1976k kernel code, 19156k reserved, 606k data, 288k init, 131008k highmem)
[4294669.532000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294669.592000] Calibrating delay using timer specific routine.. 5214.67 BogoMIPS (lpj=2607335)
[4294669.592000] Security Framework v1.0.0 initialized
[4294669.592000] SELinux:  Disabled at boot.
[4294669.592000] Mount-cache hash table entries: 512
[4294669.592000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[4294669.592000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[4294669.592000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294669.592000] CPU: L2 cache: 512K
[4294669.592000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[4294669.592000] mtrr: v2.0 (20020519)
[4294669.592000] CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
[4294669.592000] Enabling fast FPU save and restore... done.
[4294669.592000] Enabling unmasked SIMD FPU exception support... done.
[4294669.592000] Checking 'hlt' instruction... OK.
[4294669.596000] checking if image is initramfs... it is
[4294670.135000] Freeing initrd memory: 6836k freed
[4294670.146000] ACPI: Looking for DSDT ... not found!
[4294670.151000] ENABLING IO-APIC IRQs
[4294670.151000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294670.262000] NET: Registered protocol family 16
[4294670.262000] EISA bus registered
[4294670.262000] ACPI: bus type pci registered
[4294670.274000] PCI: PCI BIOS revision 2.10 entry at 0xfb030, last bus=2
[4294670.274000] PCI: Using configuration type 1
[4294670.274000] ACPI: Subsystem revision 20051216
[4294670.283000] ACPI: Interpreter enabled
[4294670.283000] ACPI: Using IOAPIC for interrupt routing
[4294670.283000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.283000] PCI: Probing PCI hardware (bus 00)
[4294670.286000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[4294670.286000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[4294670.286000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294670.286000] Boot video device is 0000:01:00.0
[4294670.286000] PCI: Transparent bridge - 0000:00:1e.0
[4294670.286000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.293000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[4294670.296000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[4294670.297000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294670.297000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294670.297000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[4294670.297000] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 9 10 11 12 14 15)
[4294670.298000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294670.298000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294670.298000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[4294670.298000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.298000] pnp: PnP ACPI init
[4294670.302000] pnp: PnP ACPI: found 13 devices
[4294670.302000] PnPBIOS: Disabled by ACPI PNP
[4294670.302000] PCI: Using ACPI for IRQ routing
[4294670.302000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294670.317000] pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
[4294670.317000] PCI: Bridge: 0000:00:01.0
[4294670.317000]   IO window: disabled.
[4294670.317000]   MEM window: f4000000-f5ffffff
[4294670.317000]   PREFETCH window: e0000000-efffffff
[4294670.317000] PCI: Bridge: 0000:00:1e.0
[4294670.317000]   IO window: d000-dfff
[4294670.317000]   MEM window: f6000000-f60fffff
[4294670.317000]   PREFETCH window: 50000000-500fffff
[4294670.317000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294670.317000] audit: initializing netlink socket (disabled)
[4294670.317000] audit(1153582966.316:1): initialized
[4294670.317000] highmem bounce pool size: 64 pages
[4294670.317000] VFS: Disk quotas dquot_6.5.1
[4294670.318000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.318000] Initializing Cryptographic API
[4294670.318000] io scheduler noop registered
[4294670.318000] io scheduler anticipatory registered
[4294670.318000] io scheduler deadline registered
[4294670.318000] io scheduler cfq registered
[4294670.318000] isapnp: Scanning for PnP cards...
[4294670.674000] isapnp: No Plug & Play device found
[4294670.689000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294670.691000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.691000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.691000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294670.691000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.693000] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.694000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[4294670.694000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.694000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294670.694000] mice: PS/2 mouse device common for all mice
[4294670.694000] EISA: Probing bus 0 at eisa.0
[4294670.694000] EISA: Detected 0 cards.
[4294670.694000] NET: Registered protocol family 2
[4294670.703000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.703000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[4294670.703000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.704000] TCP: Hash tables configured (established 262144 bind 65536)
[4294670.704000] TCP reno registered
[4294670.704000] TCP bic registered
[4294670.704000] NET: Registered protocol family 1
[4294670.704000] NET: Registered protocol family 8
[4294670.704000] NET: Registered protocol family 20
[4294670.704000] Using IPI Shortcut mode
[4294670.704000] ACPI wakeup devices:
[4294670.704000] PCI0 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE MODM
[4294670.704000] ACPI: (supports S0 S1 S4 S5)
[4294670.704000] Freeing unused kernel memory: 288k freed
[4294670.722000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294670.752000] vga16fb: initializing
[4294670.752000] vga16fb: mapped to 0xc00a0000
[4294670.893000] Console: switching to colour frame buffer device 80x25
[4294670.893000] fb0: VGA16 VGA frame buffer device
[4294672.009000] Capability LSM initialized
[4294672.041000] ACPI: Fan [FAN] (on)
[4294672.046000] ACPI: Thermal Zone [THRM] (37 C)
[4294672.567000] ICH5: IDE controller at PCI slot 0000:00:1f.1
[4294672.567000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
[4294672.567000] ICH5: chipset revision 2
[4294672.567000] ICH5: not 100% native mode: will probe irqs later
[4294672.567000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
[4294672.567000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
[4294672.567000] Probing IDE interface ide0...
[4294672.831000] hda: WDC WD1600BB-22GUC0, ATA DISK drive
[4294673.444000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.463000] Probing IDE interface ide1...
[4294674.135000] hdc: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
[4294674.747000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.760000] hda: max request size: 1024KiB
[4294674.767000] hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
[4294674.769000] hda: cache flushes supported
[4294674.769000]  hda: hda1 hda2
[4294674.785000] hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294674.785000] Uniform CD-ROM driver Revision: 3.20
[4294678.876000] SCSI subsystem initialized
[4294678.878000] ACPI: bus type scsi registered
[4294678.878000] libata version 1.20 loaded.
[4294678.879000] ata_piix 0000:00:1f.2: version 1.05
[4294678.879000] ata_pci_init_one: pci_dev class+intf: 0x1018f
[4294678.879000] ata_pci_init_one: NO_LEGACY == 0
[4294678.879000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
[4294678.879000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294678.879000] ata1: PATA max UDMA/133 cmd 0xE400 ctl 0xE502 bmdma 0xE800 irq 169
[4294678.879000] ata2: PATA max UDMA/133 cmd 0xE600 ctl 0xE702 bmdma 0xE808 irq 169
[4294680.106000] scsi0 : ata_piix
[4294681.333000] scsi1 : ata_piix
[4294681.371000] usbcore: registered new driver usbfs
[4294681.371000] usbcore: registered new driver hub
[4294681.373000] USB Universal Host Controller Interface driver v2.3
[4294681.373000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
[4294681.373000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294681.373000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294681.374000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294681.374000] uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000e300
[4294681.374000] hub 1-0:1.0: USB hub found
[4294681.374000] hub 1-0:1.0: 2 ports detected
[4294681.427000] ieee1394: Initialized config rom entry `ip1394'
[4294681.475000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
[4294681.475000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294681.475000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294681.475000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294681.475000] uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000e000
[4294681.475000] hub 2-0:1.0: USB hub found
[4294681.475000] hub 2-0:1.0: 2 ports detected
[4294681.576000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
[4294681.576000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294681.576000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294681.576000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294681.576000] uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000e100
[4294681.576000] hub 3-0:1.0: USB hub found
[4294681.576000] hub 3-0:1.0: 2 ports detected
[4294681.677000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 177
[4294681.677000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294681.677000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294681.677000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294681.677000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000e200
[4294681.677000] hub 4-0:1.0: USB hub found
[4294681.677000] hub 4-0:1.0: 2 ports detected
[4294681.780000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
[4294681.780000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294681.780000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294681.780000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294681.780000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294681.780000] ehci_hcd 0000:00:1d.7: irq 193, io mem 0xf6100000
[4294681.784000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294681.785000] hub 5-0:1.0: USB hub found
[4294681.785000] hub 5-0:1.0: 8 ports detected
[4294681.886000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[4294681.886000] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 201
[4294681.886000] PCI: Via IRQ fixup for 0000:02:08.0, from 3 to 9
[4294681.940000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[201]  MMIO=[f6010000-f60107ff]  Max Packet=[2048]
[4294683.203000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00301baf00001ffc]
[4294685.946000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[4294685.946000] hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[4294685.946000] ide: failed opcode was: unknown
[4294685.946000] end_request: I/O error, dev hdc, sector 1427224
[4294685.946000] Buffer I/O error on device hdc, logical block 356806
[4294685.955000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[4294685.955000] hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[4294685.955000] ide: failed opcode was: unknown
[4294685.955000] end_request: I/O error, dev hdc, sector 1427224
[4294685.955000] Buffer I/O error on device hdc, logical block 356806
[4294685.964000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[4294685.964000] hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[4294685.964000] ide: failed opcode was: unknown
[4294685.964000] end_request: I/O error, dev hdc, sector 1427224
[4294685.964000] Buffer I/O error on device hdc, logical block 356806
[4294685.973000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[4294685.973000] hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[4294685.973000] ide: failed opcode was: unknown
[4294685.973000] end_request: I/O error, dev hdc, sector 1427224
[4294685.973000] Buffer I/O error on device hdc, logical block 356806
[4294685.982000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[4294685.982000] hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[4294685.982000] ide: failed opcode was: unknown
[4294685.982000] end_request: I/O error, dev hdc, sector 1427224
[4294685.982000] Buffer I/O error on device hdc, logical block 356806
[4294685.991000] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[4294685.991000] hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[4294685.991000] ide: failed opcode was: unknown
[4294685.991000] end_request: I/O error, dev hdc, sector 1427224
[4294685.991000] Buffer I/O error on device hdc, logical block 356806
[4294686.391000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294686.433000] ISO 9660 Extensions: RRIP_1991A
[4294686.472000] loop: loaded (max 8 devices)
[4294686.483000] Registering unionfs 1.1.2
[4294686.553000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[4294717.712000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294717.713000] 8139cp: pci dev 0000:02:06.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[4294717.713000] 8139cp: Try the "8139too" driver instead.
[4294717.715000] 8139too Fast Ethernet driver 0.9.27
[4294717.715000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 169
[4294717.715000] eth0: RealTek RTL8139 at 0xf8a1c000, 00:30:1b:af:1f:98, IRQ 169
[4294717.715000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[4294727.317000] eth0: link down
[4294728.260000] Linux agpgart interface v0.101 (c) Dave Jones
[4294728.286000] agpgart: Detected an Intel 865 Chipset.
[4294728.288000] agpgart: AGP aperture is 64M @ 0xf0000000
[4294728.556000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294728.574000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294728.688000] NET: Registered protocol family 17
[4294729.224000] Real Time Clock Driver v1.12
[4294729.806000] hw_random: RNG not detected
[4294730.053000] input: PC Speaker as /class/input/input1
[4294730.165000] FDC 0 is a post-1991 82077
[4294730.319000] logips2pp: Detected unknown logitech mouse model 56
[4294730.340000] parport: PnPBIOS parport detected.
[4294730.340000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[4294730.391000] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
[4294730.622000] ts: Compaq touchscreen protocol output
[4294731.947000] ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 185
[4294731.947000] Model 1006 Rev 00000000 Serial 10061102
[4294733.475000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294733.475000] md: bitmap version 4.39
[4294733.999000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294749.020000] ACPI: Power Button (FF) [PWRF]
[4294749.020000] ACPI: Power Button (CM) [PWRB]
[4294749.118000] ibm_acpi: ec object not found
[4294749.141000] pcc_acpi: loading...
[4294756.049000] lp0: using parport0 (interrupt-driven).
[4294756.109000] ppdev: user-space parallel port driver
[4294757.160000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294757.160000] apm: overridden by ACPI.
[4294761.634000] Bluetooth: Core ver 2.8
[4294761.634000] NET: Registered protocol family 31
[4294761.634000] Bluetooth: HCI device and connection manager initialized
[4294761.634000] Bluetooth: HCI socket layer initialized
[4294761.810000] Bluetooth: L2CAP ver 2.8
[4294761.810000] Bluetooth: L2CAP socket layer initialized
[4294761.826000] Bluetooth: RFCOMM socket layer initialized
[4294761.826000] Bluetooth: RFCOMM TTY layer initialized
[4294761.826000] Bluetooth: RFCOMM ver 1.7
[4294828.791000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294828.792000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294828.993000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294828.994000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294829.195000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294829.196000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294829.397000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294829.398000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294829.599000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294829.600000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294829.600000] hub 5-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
[4294829.651000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294829.652000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294829.853000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294829.854000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294830.055000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294830.056000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294830.257000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294830.258000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294830.459000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294830.460000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294830.460000] hub 5-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
[4294830.511000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294830.512000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294830.713000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294830.714000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294830.915000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294830.916000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294831.117000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294831.118000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294831.319000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294831.320000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294831.320000] hub 5-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
[4294831.371000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294831.372000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294831.573000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294831.574000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294831.775000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294831.776000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294831.977000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294831.978000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294832.179000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294832.180000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294832.180000] hub 5-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
[4294845.291000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294845.292000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294845.493000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294845.494000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294845.695000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294845.696000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294845.897000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294845.898000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294846.099000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294846.100000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294846.100000] hub 5-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
[4294846.151000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294846.152000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294846.353000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294846.354000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294846.555000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294846.556000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294846.757000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294846.758000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294846.959000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294846.960000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294846.960000] hub 5-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
[4294847.011000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294847.012000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294847.213000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294847.214000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294847.415000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294847.416000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294847.617000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294847.618000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294847.819000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294847.820000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294847.820000] hub 5-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
[4294847.871000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294847.872000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294848.676000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294848.677000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294848.878000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294848.879000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294849.080000] ehci_hcd 0000:00:1d.7: port 5 reset error -110
[4294849.081000] hub 5-0:1.0: hub_port_status failed (err = -32)
[4294849.081000] hub 5-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
[4298070.584000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[4298089.757000] NET: Registered protocol family 10
[4298089.757000] lo: Disabled Privacy Extensions
[4298089.758000] IPv6 over IPv4 tunneling driver
[4298100.610000] eth0: no IPv6 routers present