All pastes #959105 Raw Edit

Mine

public text v1 · immutable
#959105 ·published 2008-03-27 03:45 UTC
rendered paste body
[   26.056834] CPU: L1 I cache: 32K, L1 D cache: 32K
[   26.056835] CPU: L2 cache: 4096K
[   26.056837] CPU: Physical Processor ID: 0
[   26.056838] CPU: Processor Core ID: 3
[   26.056839] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
[   26.057420] CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
[   26.057434] Total of 4 processors activated (19203.29 BogoMIPS).
[   26.057571] ENABLING IO-APIC IRQs
[   26.057727] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   26.204658] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   26.224659] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[   26.244674] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[   26.264657] Brought up 4 CPUs
[   26.264693] CPU0 attaching sched-domain:
[   26.264694]  domain 0: span 03
[   26.264695]   groups: 01 02
[   26.264698]   domain 1: span 0f
[   26.264699]    groups: 03 0c
[   26.264701] CPU1 attaching sched-domain:
[   26.264702]  domain 0: span 03
[   26.264703]   groups: 02 01
[   26.264705]   domain 1: span 0f
[   26.264706]    groups: 03 0c
[   26.264708] CPU2 attaching sched-domain:
[   26.264709]  domain 0: span 0c
[   26.264710]   groups: 04 08
[   26.264712]   domain 1: span 0f
[   26.264713]    groups: 0c 03
[   26.264714] CPU3 attaching sched-domain:
[   26.264715]  domain 0: span 0c
[   26.264717]   groups: 08 04
[   26.264718]   domain 1: span 0f
[   26.264719]    groups: 0c 03
[   26.264938] net_namespace: 64 bytes
[   26.264946] Booting paravirtualized kernel on bare hardware
[   26.265270] Time: 23:22:29  Date: 03/26/08
[   26.265302] NET: Registered protocol family 16
[   26.265421] EISA bus registered
[   26.265425] ACPI: bus type pci registered
[   26.271311] PCI: PCI BIOS revision 3.00 entry at 0xfb660, last bus=5
[   26.271312] PCI: Using configuration type 1
[   26.271313] Setting up standard PCI resources
[   26.271988] mtrr: your CPUs had inconsistent variable MTRR settings
[   26.271990] mtrr: probably your BIOS does not setup all CPUs.
[   26.271991] mtrr: corrected configuration.
[   26.272918] ACPI: EC: Look up EC in DSDT
[   26.276114] ACPI: Interpreter enabled
[   26.276123] ACPI: (supports S0 S3 S4 S5)
[   26.276135] ACPI: Using IOAPIC for interrupt routing
[   26.279564] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   26.280198] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[   26.280201] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   26.280925] PCI: Transparent bridge - 0000:00:1e.0
[   26.280952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   26.281061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[   26.281116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[   26.281171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[   26.281223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   26.292681] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[   26.292754] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   26.292825] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[   26.292895] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   26.292965] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   26.293035] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[   26.293105] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[   26.293175] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[   26.293260] Linux Plug and Play Support v0.97 (c) Adam Belay
[   26.293279] pnp: PnP ACPI init
[   26.293283] ACPI: bus type pnp registered
[   26.294844] pnpacpi: exceeded the max number of mem resources: 12
[   26.294938] pnp: PnP ACPI: found 12 devices
[   26.294939] ACPI: ACPI bus type pnp unregistered
[   26.294942] PnPBIOS: Disabled by ACPI PNP
[   26.295092] PCI: Using ACPI for IRQ routing
[   26.295094] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   26.352505] NET: Registered protocol family 8
[   26.352507] NET: Registered protocol family 20
[   26.352537] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[   26.352542] hpet0: 4 64-bit timers, 14318180 Hz
[   26.353565] AppArmor: AppArmor Filesystem Enabled
[   26.356433] Time: tsc clocksource has been installed.
[   26.356441] Switched to high resolution mode on CPU 0
[   26.356505] Switched to high resolution mode on CPU 1
[   26.356950] Switched to high resolution mode on CPU 2
[   26.356989] Switched to high resolution mode on CPU 3
[   26.368926] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[   26.368929] system 00:01: ioport range 0x290-0x29f has been reserved
[   26.368932] system 00:01: ioport range 0x800-0x87f has been reserved
[   26.368935] system 00:01: ioport range 0x290-0x294 has been reserved
[   26.368937] system 00:01: ioport range 0x880-0x88f has been reserved
[   26.368946] system 00:08: ioport range 0x400-0x4bf could not be reserved
[   26.368953] system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
[   26.368959] system 00:0a: iomem range 0xcce00-0xcffff has been reserved
[   26.368962] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[   26.368964] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[   26.368967] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[   26.368970] system 00:0a: iomem range 0x7fee0000-0x7fefffff could not be reserved
[   26.368973] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[   26.368976] system 00:0a: iomem range 0x100000-0x7fedffff could not be reserved
[   26.368979] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[   26.368982] system 00:0a: iomem range 0xfed10000-0xfed1dfff could not be reserved
[   26.368985] system 00:0a: iomem range 0xfed20000-0xfed8ffff could not be reserved
[   26.368988] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[   26.368991] system 00:0a: iomem range 0xffb00000-0xffb7ffff could not be reserved
[   26.399247] PCI: Bridge: 0000:00:01.0
[   26.399249]   IO window: b000-bfff
[   26.399251]   MEM window: f4000000-f7ffffff
[   26.399253]   PREFETCH window: e0000000-efffffff
[   26.399256] PCI: Bridge: 0000:00:1c.0
[   26.399258]   IO window: a000-afff
[   26.399261]   MEM window: disabled.
[   26.399263]   PREFETCH window: disabled.
[   26.399267] PCI: Bridge: 0000:00:1c.3
[   26.399269]   IO window: c000-cfff
[   26.399272]   MEM window: fa000000-fa0fffff
[   26.399275]   PREFETCH window: disabled.
[   26.399278] PCI: Bridge: 0000:00:1c.4
[   26.399280]   IO window: d000-dfff
[   26.399283]   MEM window: f8000000-f9ffffff
[   26.399286]   PREFETCH window: 80000000-800fffff
[   26.399290] PCI: Bridge: 0000:00:1e.0
[   26.399290]   IO window: disabled.
[   26.399294]   MEM window: fa100000-fa1fffff
[   26.399296]   PREFETCH window: disabled.
[   26.399307] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   26.399310] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   26.399324] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   26.399328] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   26.399342] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
[   26.399345] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   26.399358] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[   26.399362] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   26.399370] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   26.399378] NET: Registered protocol family 2
[   26.436831] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   26.437008] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   26.437306] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   26.437435] TCP: Hash tables configured (established 131072 bind 65536)
[   26.437437] TCP reno registered
[   26.448883] checking if image is initramfs... it is
[   26.911736] Freeing initrd memory: 7283k freed
[   26.912784] audit: initializing netlink socket (disabled)
[   26.912796] audit(1206573749.308:1): initialized
[   26.913008] highmem bounce pool size: 64 pages
[   26.915175] VFS: Disk quotas dquot_6.5.1
[   26.915244] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   26.915364] io scheduler noop registered
[   26.915366] io scheduler anticipatory registered
[   26.915368] io scheduler deadline registered
[   26.915379] io scheduler cfq registered (default)
[   26.915498] Boot video device is 0000:01:00.0
[   26.915619] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   26.915658] assign_interrupt_mode Found MSI capability
[   26.915686] Allocate Port Service[0000:00:01.0:pcie00]
[   26.915764] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   26.915802] assign_interrupt_mode Found MSI capability
[   26.915833] Allocate Port Service[0000:00:1c.0:pcie00]
[   26.915868] Allocate Port Service[0000:00:1c.0:pcie02]
[   26.915948] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   26.915987] assign_interrupt_mode Found MSI capability
[   26.916012] Allocate Port Service[0000:00:1c.3:pcie00]
[   26.916049] Allocate Port Service[0000:00:1c.3:pcie02]
[   26.916128] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   26.916167] assign_interrupt_mode Found MSI capability
[   26.916198] Allocate Port Service[0000:00:1c.4:pcie00]
[   26.916232] Allocate Port Service[0000:00:1c.4:pcie02]
[   26.916490] isapnp: Scanning for PnP cards...
[   27.268828] isapnp: No Plug & Play device found
[   27.296536] Real Time Clock Driver v1.12ac
[   27.296644] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   27.296755] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   27.297302] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   27.298153] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   27.298218] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   27.298371] PNP: No PS/2 controller found. Probing ports directly.
[   27.298692] serio: i8042 KBD port at 0x60,0x64 irq 1
[   27.298695] serio: i8042 AUX port at 0x60,0x64 irq 12
[   27.316489] mice: PS/2 mouse device common for all mice
[   27.316611] EISA: Probing bus 0 at eisa.0
[   27.316639] EISA: Detected 0 cards.
[   27.316647] cpuidle: using governor ladder
[   27.316649] cpuidle: using governor menu
[   27.316717] NET: Registered protocol family 1
[   27.316741] Using IPI No-Shortcut mode
[   27.316762] registered taskstats version 1
[   27.316877]   Magic number: 0:200:404
[   27.316901] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   27.316903] EDD information not available.
[   27.317006] Freeing unused kernel memory: 364k freed
[   28.474808] fuse init (API version 7.9)
[   28.488143] ACPI: Processor [CPU0] (supports 8 throttling states)
[   28.488223] ACPI: SSDT 7FEE8280, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
[   28.488322] ACPI: Processor [CPU1] (supports 8 throttling states)
[   28.488399] ACPI: SSDT 7FEE8310, 0087 (r1  PmRef  Cpu2Ist     3000 INTL 20040311)
[   28.488520] ACPI: Processor [CPU2] (supports 8 throttling states)
[   28.488626] ACPI: SSDT 7FEE83A0, 0087 (r1  PmRef  Cpu3Ist     3000 INTL 20040311)
[   28.488732] ACPI: Processor [CPU3] (supports 8 throttling states)
[   28.587747] usbcore: registered new interface driver usbfs
[   28.587763] usbcore: registered new interface driver hub
[   28.588917] usbcore: registered new device driver usb
[   28.595917] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[   28.595926] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   28.595929] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   28.596104] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[   28.600012] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[   28.600018] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa205000
[   28.609986] USB Universal Host Controller Interface driver v3.0
[   28.628844] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   28.628937] usb usb1: configuration #1 chosen from 1 choice
[   28.628953] hub 1-0:1.0: USB hub found
[   28.628957] hub 1-0:1.0: 6 ports detected
[   28.665565] SCSI subsystem initialized
[   28.670740] libata version 3.00 loaded.
[   28.732788] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[   28.732796] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   28.732799] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   28.732821] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[   28.732846] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[   28.732927] usb usb2: configuration #1 chosen from 1 choice
[   28.732943] hub 2-0:1.0: USB hub found
[   28.732946] hub 2-0:1.0: 2 ports detected
[   28.836576] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19
[   28.836583] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   28.836585] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   28.836602] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[   28.836623] uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000e200
[   28.836696] usb usb3: configuration #1 chosen from 1 choice
[   28.836711] hub 3-0:1.0: USB hub found
[   28.836714] hub 3-0:1.0: 2 ports detected
[   28.940402] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
[   28.940409] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[   28.940412] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[   28.940429] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[   28.940448] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[   28.940519] usb usb4: configuration #1 chosen from 1 choice
[   28.940536] hub 4-0:1.0: USB hub found
[   28.940539] hub 4-0:1.0: 2 ports detected
[   29.045766] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[   29.045777] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   29.045781] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   29.045803] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   29.049692] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   29.049698] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfa204000
[   29.065138] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   29.065231] usb usb5: configuration #1 chosen from 1 choice
[   29.065254] hub 5-0:1.0: USB hub found
[   29.065259] hub 5-0:1.0: 6 ports detected
[   29.168107] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
[   29.168135] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   29.168147] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[   29.168177] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 17
[   29.168191] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   29.168198] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
[   29.168224] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
[   29.168228] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16
[   29.168247] PCI: Setting latency timer of device 0000:03:00.1 to 64
[   29.168257] ACPI: PCI interrupt for device 0000:03:00.1 disabled
[   29.168291] r8169 Gigabit Ethernet driver 2.2LK loaded
[   29.168317] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   29.168333] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   29.168573] eth0: RTL8168b/8111b at 0xf8874000, 00:1a:4d:53:b7:4b, XID 38000000 IRQ 219
[   29.169663] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[   29.169674] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   29.169677] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   29.169693] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[   29.169712] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e300
[   29.169789] usb usb6: configuration #1 chosen from 1 choice
[   29.169805] hub 6-0:1.0: USB hub found
[   29.169808] hub 6-0:1.0: 2 ports detected
[   29.271902] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[   29.271910] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   29.271914] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   29.271935] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[   29.271959] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e400
[   29.272044] usb usb7: configuration #1 chosen from 1 choice
[   29.272060] hub 7-0:1.0: USB hub found
[   29.272063] hub 7-0:1.0: 2 ports detected
[   29.375736] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   29.375743] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   29.375747] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   29.375767] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[   29.375788] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[   29.375884] usb usb8: configuration #1 chosen from 1 choice
[   29.375898] hub 8-0:1.0: USB hub found
[   29.375902] hub 8-0:1.0: 2 ports detected
[   29.479597] ata_piix 0000:00:1f.2: version 2.12
[   29.479603] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   29.479621] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
[   29.479656] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   29.479703] scsi0 : ata_piix
[   29.479745] scsi1 : ata_piix
[   29.480135] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[   29.480137] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[   29.775007] usb 8-1: new low speed USB device using uhci_hcd and address 2
[   29.839082] ata1.00: HPA unlocked: 625140335 -> 625142448, native 625142448
[   29.839086] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[   29.839088] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   29.883924] ata1.00: configured for UDMA/133
[   29.956987] usb 8-1: configuration #1 chosen from 1 choice
[   30.086839] ata2.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
[   30.086843] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   30.153374] ata2.00: configured for UDMA/133
[   30.153483] scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
[   30.153589] scsi 1:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
[   30.153634] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[   30.153646] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 17
[   30.153666] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   30.153689] scsi2 : ata_piix
[   30.153717] scsi3 : ata_piix
[   30.154046] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 17
[   30.154048] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 17
[   30.202845] usb 8-2: new low speed USB device using uhci_hcd and address 3
[   30.378334] usb 8-2: configuration #1 chosen from 1 choice
[   30.470090] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB01, max UDMA/100
[   30.641852] ata3.00: configured for UDMA/100
[   30.808720] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203B  SB01 PQ: 0 ANSI: 5
[   30.808833] ahci 0000:03:00.0: version 3.0
[   30.808870] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17
[   30.839017] usbcore: registered new interface driver hiddev
[   30.853751] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
[   30.865817] input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.2-1
[   30.881523] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
[   30.890274] input,hidraw1: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.2-1
[   30.905636] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[   30.925225] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2
[   30.925240] usbcore: registered new interface driver usbhid
[   30.925243] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   31.809323] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[   31.809327] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[   31.809334] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   31.809442] scsi4 : ahci
[   31.809499] scsi5 : ahci
[   31.809544] ata5: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 17
[   31.809548] ata6: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 17
[   32.127308] ata5: SATA link down (SStatus 0 SControl 300)
[   32.446790] ata6: SATA link down (SStatus 0 SControl 300)
[   32.446852] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16
[   32.446888] PCI: Setting latency timer of device 0000:03:00.1 to 64
[   32.446948] scsi6 : pata_jmicron
[   32.447069] scsi7 : pata_jmicron
[   32.447435] ata7: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
[   32.447437] ata8: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
[   32.774194] Driver 'sr' needs updating - please use bus_type methods
[   32.776072] Driver 'sd' needs updating - please use bus_type methods
[   32.776124] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   32.776133] sd 0:0:0:0: [sda] Write Protect is off
[   32.776134] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   32.776145] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.776177] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   32.776183] sd 0:0:0:0: [sda] Write Protect is off
[   32.776185] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   32.776196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.776198]  sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   32.780100] Uniform CD-ROM driver Revision: 3.20
[   32.780147] sr 2:0:0:0: Attached scsi CD-ROM sr0
[   32.783236] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   32.783250] scsi 1:0:0:0: Attached scsi generic sg1 type 0
[   32.783264] sr 2:0:0:0: Attached scsi generic sg2 type 5
[   32.792661]  sda1 sda2 < sda5 sda6 >
[   32.826732] sd 0:0:0:0: [sda] Attached SCSI disk
[   32.826782] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   32.826791] sd 1:0:0:0: [sdb] Write Protect is off
[   32.826792] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   32.826805] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.826835] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   32.826842] sd 1:0:0:0: [sdb] Write Protect is off
[   32.826844] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   32.826855] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.826858]  sdb: sdb1
[   32.845945] sd 1:0:0:0: [sdb] Attached SCSI disk
[   33.024268] Attempting manual resume
[   33.024271] swsusp: Resume From Partition 8:6
[   33.024272] PM: Checking swsusp image.
[   33.024389] PM: Resume from disk failed.
[   33.060716] kjournald starting.  Commit interval 5 seconds
[   33.060726] EXT3-fs: mounted filesystem with ordered data mode.
[   37.983260] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   38.048218] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   38.096420] iTCO_vendor_support: vendor-support=0
[   38.097227] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   38.097276] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
[   38.097303] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   38.143981] Linux agpgart interface v0.102
[   38.146068] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   38.235102] input: Power Button (FF) as /devices/virtual/input/input5
[   38.306939] parport_pc 00:07: reported by Plug and Play ACPI
[   38.306984] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   38.366401] ACPI: Power Button (FF) [PWRF]
[   38.366445] input: Power Button (CM) as /devices/virtual/input/input6
[   38.430293] ACPI: Power Button (CM) [PWRB]
[   38.469105] nvidia: module license 'NVIDIA' taints kernel.
[   38.728196] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   38.728203] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   38.728276] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[   38.935050] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[   38.935066] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   39.162818] lp0: using parport0 (interrupt-driven).
[   39.228291] Adding 4040308k swap on /dev/sda6.  Priority:-1 extents:1 across:4040308k
[   39.837207] EXT3 FS on sda5, internal journal
[   40.797137] ip_tables: (C) 2000-2006 Netfilter Core Team
[   41.117754] No dock devices found.
[   42.302296] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   42.302301] apm: disabled - APM is not SMP safe.
[   42.401064] ppdev: user-space parallel port driver
[   43.588190] r8169: eth0: link up
[   43.588197] r8169: eth0: link up
[   43.652047] Bluetooth: Core ver 2.11
[   43.652145] NET: Registered protocol family 31
[   43.652147] Bluetooth: HCI device and connection manager initialized
[   43.652151] Bluetooth: HCI socket layer initialized
[   43.663532] Bluetooth: L2CAP ver 2.9
[   43.663536] Bluetooth: L2CAP socket layer initialized
[   43.720163] Bluetooth: RFCOMM socket layer initialized
[   43.720174] Bluetooth: RFCOMM TTY layer initialized
[   43.720176] Bluetooth: RFCOMM ver 1.8
[   48.005216] NET: Registered protocol family 17
[   53.595339] NET: Registered protocol family 10
[   53.595592] lo: Disabled Privacy Extensions
[   64.527285] eth0: no IPv6 routers present