Unnamed

// Persistence of Vision Ray Tracer Include File// File: bricks.inc// Vers: 3.6// Desc: LEGO Parts// Auth: Nicolas Alvarez// Last mod: 21-6-2005#ifdef(View_POV_Include_Stack)	#debug "  Bricks\n"#end//------------------------------------------AddPart("3005 Brick 1 x 1")#declare p3005=Join(){	difference	{		bBrick(1,1)		object { stdSmallHole }	}	object { stdTop }}AddPart("3004 Brick 1 x 2")#declare p3004=Join(){	difference	{		bBrick(2,1)		Studs(stdSmallHole, 2, 1)	}	Studs(stdTop, 2, 1)	object { stdBottomThin }}AddPart("3622 Brick 1 x 3")#declare p3622=Join(){	difference	{		bBrick(3,1)		Studs(stdSmallHole, 3, 1)	}	Studs(stdTop, 3, 1)	Studs(stdBottomThin,2,1)}AddPart("3010 Brick 1 x 4")#declare p3010=Join(){	difference	{		bBrick(4,1)		Studs(stdSmallHole, 4, 1)	}	Studs(stdTop, 4, 1)	Studs(stdBottomThin,3,1)}AddPart("3009 Brick 1 x 6")#declare p3009=Join(){	difference	{		bBrick(6,1)		Studs(stdSmallHole, 6, 1)	}	Studs(stdTop, 6, 1)	Studs(stdBottomThin,5,1)}AddPart("3008 Brick 1 x 8")#declare p3008=Join(){	difference	{		bBrick(8,1)		Studs(stdSmallHole, 8, 1)	}	Studs(stdTop, 8, 1)	Studs(stdBottomThin,7,1)}AddPart("3003 Brick 2 x 2")#declare p3003=Join(){	difference	{		bBrick(2,2)		Studs(stdSmallHole, 2, 2)	}	Studs(stdTop, 2, 2)	object { stdBottomOpen }}AddPart("3002 Brick 2 x 3")#declare p3002=Join(){	difference	{		bBrick(3,2)		Studs(stdSmallHole, 3, 2)	}	Studs(stdTop, 3, 2)	Studs(stdBottomOpen, 2, 1)}AddPart("3001 Brick 2 x 4")#declare p3001=Join(){	difference	{		bBrick(4,2)		Studs(stdSmallHole, 4, 2)	}	Studs(stdTop, 4, 2)	Studs(stdBottomOpen, 3, 1)	object	{		Div1	}}AddPart("2456 Brick 2 x 6")#declare p2456=Join(){	difference	{		bBrick(6,2)		Studs(stdSmallHole, 6, 2)	}	Studs(stdTop, 6, 2)	Studs(stdBottomOpen, 5, 1)	object	{		Div1		translate -x*5	}	object	{		Div1		translate x*5	}}AddPart("3007 Brick 2 x 8")#declare p3007=Join(){	difference	{		bBrick(8,2)		Studs(stdSmallHole, 8, 2)	}	Studs(stdTop, 8, 2)	Studs(stdBottomOpen, 7, 1)	object	{		Div1	}	object	{		Div1		translate -x*10	}	object	{		Div1		translate x*10	}}AddPart("3006 Brick 2 x 10")#declare p3006=Join(){	difference	{		bBrick(10,2)		Studs(stdSmallHole, 10, 2)	}	Studs(stdTop, 10, 2)	Studs(stdBottomOpen, 9, 1)	//!important: Check if Div1 is needed for this part}AddPart("2357 Brick 2 x 2 Corner")#declare p2357=Join(){	difference	{		difference		{			object			{				aBrick(2,2)			}			object			{				aBrick(1,1)				Tb(0.5,1e-5,0.5)				scale 1.001			}		}		object		{			hBrick(2,1)			Tb(0,0,-0.5)		}		object		{			hBrick(1,2)			Tb(-0.5,0,0)			scale 1+1e-5		}		StudsV(stdSmallHole, 2, 2,array[1]{<1,1>})	}	StudsV(stdTop, 2, 2,array[1]{<1,1>})	Join()	{		object{stdBottomThin}		box		{			<-2,-0.1,-0.05>			< 2,-4.0, 0.05>		}		Tb(-0.5,0,0)	}	Join()	{		object{stdBottomThin}		box		{			<-0.05,-0.1,-2>			< 0.05,-4.0, 2>		}		Tb(0,0,-0.5)	}	Tb(0.5,0,0.5)}AddPart("3065 Brick 1 x 2 without Centre Studs")#declare p3065=Join(){	difference	{		bBrick(2,1)		Studs(stdSmallHole, 2, 1)	}	Studs(stdTop, 2, 1)}AddPart("3067 Brick 1 x 6 without Centre Studs")#declare p3067=Join(){	difference	{		bBrick(6,1)		Studs(stdSmallHole, 6, 1)	}	Studs(stdTop, 6, 1)}AddPart("3040 Slope Brick 45 2 x 1")#local unnamed1=plane { y,0 rotate -x*45 }#declare p3040=Join(){	difference	{		intersection		{			aBrick(1,2)			object { unnamed1 translate <0,-Brk.y+1,-Plt.z> }		}		intersection		{			hBrick(1,2)			object { unnamed1 translate <0,-Brk.y+1,-Plt.z+1> }		}		object{stdSmallHole translate Brk*z/2}	}	object{stdTop translate Brk*z/2}	intersection	{		object{stdBottomThin}		object { unnamed1 translate <0,-Brk.y+1,-Plt.z+1> }	}	translate -Brk*z/2}