rendered paste body[ 0.000000] Linux version 2.6.24-gentoo-r3 (root@alpha) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #5 SMP PREEMPT Tue Mar 25 18:48:59 EET 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262096
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262096
[ 0.000000] On node 0 totalpages: 262096
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32465 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F9DE0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FFD0000, 0034 (r1 A M I OEMRSDT 4000727 MSFT 97)
[ 0.000000] ACPI: FACP 3FFD0200, 0084 (r2 A M I OEMFACP 4000727 MSFT 97)
[ 0.000000] ACPI: DSDT 3FFD0440, 51C9 (r1 1AAAA 1AAAA000 0 INTL 2002026)
[ 0.000000] ACPI: FACS 3FFDE000, 0040
[ 0.000000] ACPI: APIC 3FFD0390, 006C (r1 A M I OEMAPIC 4000727 MSFT 97)
[ 0.000000] ACPI: MCFG 3FFD0400, 003C (r1 A M I OEMMCFG 4000727 MSFT 97)
[ 0.000000] ACPI: OEMB 3FFDE040, 0056 (r1 A M I AMI_OEM 4000727 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260049
[ 0.000000] Kernel command line: root=/dev/sda3
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2992.681 MHz processor.
[ 15.135798] Console: colour VGA+ 80x25
[ 15.135801] console [tty0] enabled
[ 15.138401] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.138769] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.163014] Memory: 1034928k/1048384k available (2272k kernel code, 12912k reserved, 934k data, 232k init, 130880k highmem)
[ 15.163086] virtual kernel memory layout:
[ 15.163087] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 15.163088] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.163089] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.163090] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.163091] .init : 0xc0428000 - 0xc0462000 ( 232 kB)
[ 15.163092] .data : 0xc03380e0 - 0xc0421a24 ( 934 kB)
[ 15.163093] .text : 0xc0100000 - 0xc03380e0 (2272 kB)
[ 15.163460] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.163578] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 15.223613] Calibrating delay using timer specific routine.. 5988.29 BogoMIPS (lpj=2994145)
[ 15.223728] Mount-cache hash table entries: 512
[ 15.223874] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e59d 00000000 00000001 00000000
[ 15.223883] monitor/mwait feature present.
[ 15.223929] using mwait in idle threads.
[ 15.223978] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 15.224055] CPU: L2 cache: 2048K
[ 15.224100] CPU: Physical Processor ID: 0
[ 15.224146] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000e59d 00000000 00000001 00000000
[ 15.224153] Intel machine check architecture supported.
[ 15.224204] Intel machine check reporting enabled on CPU#0.
[ 15.224253] CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
[ 15.224302] CPU0: Thermal monitoring enabled
[ 15.224351] Compat vDSO mapped to ffffe000.
[ 15.224409] Checking 'hlt' instruction... OK.
[ 15.227983] SMP alternatives: switching to UP code
[ 15.228831] ACPI: Core revision 20070126
[ 15.242724] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 05
[ 15.242846] SMP alternatives: switching to SMP code
[ 15.243482] Booting processor 1/1 eip 3000
[ 15.254031] Initializing CPU#1
[ 15.314547] Calibrating delay using timer specific routine.. 5984.16 BogoMIPS (lpj=2992084)
[ 15.314557] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e59d 00000000 00000001 00000000
[ 15.314565] monitor/mwait feature present.
[ 15.314571] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 15.314573] CPU: L2 cache: 2048K
[ 15.314576] CPU: Physical Processor ID: 0
[ 15.314578] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000e59d 00000000 00000001 00000000
[ 15.314585] Intel machine check architecture supported.
[ 15.314592] Intel machine check reporting enabled on CPU#1.
[ 15.314595] CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
[ 15.314599] CPU1: Thermal monitoring enabled
[ 15.315039] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 05
[ 15.315686] Total of 2 processors activated (11972.45 BogoMIPS).
[ 15.315882] ENABLING IO-APIC IRQs
[ 15.316100] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 15.427565] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 15.447649] Brought up 2 CPUs
[ 15.447920] net_namespace: 64 bytes
[ 15.448431] xor: automatically using best checksumming function: pIII_sse
[ 15.453461] pIII_sse : 4692.000 MB/sec
[ 15.453509] xor: using function: pIII_sse (4692.000 MB/sec)
[ 15.453580] NET: Registered protocol family 16
[ 15.453816] ACPI: bus type pci registered
[ 15.453960] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
[ 15.454110] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 15.454159] PCI: Using configuration type 1
[ 15.454205] Setting up standard PCI resources
[ 15.468385] ACPI: EC: Look up EC in DSDT
[ 15.473252] ACPI: Interpreter enabled
[ 15.473300] ACPI: (supports S0 S1 S3 S5)
[ 15.473480] ACPI: Using IOAPIC for interrupt routing
[ 15.481744] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.482398] Force enabled HPET at base address 0xfed00000
[ 15.482404] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 15.482456] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 15.483129] PCI: Transparent bridge - 0000:00:1e.0
[ 15.483208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.483377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 15.483469] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 15.483571] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 15.492724] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 15.493258] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 15.493795] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 15.494323] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 15.494859] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 15.495463] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 15.496069] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 15.496676] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 15.497229] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - B0, should be A3 [20070126]
[ 15.497357] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.497445] pnp: PnP ACPI init
[ 15.497498] ACPI: bus type pnp registered
[ 15.501832] pnp: PnP ACPI: found 16 devices
[ 15.501879] ACPI: ACPI bus type pnp unregistered
[ 15.502142] SCSI subsystem initialized
[ 15.502233] libata version 3.00 loaded.
[ 15.502393] PCI: Using ACPI for IRQ routing
[ 15.502442] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.513681] hpet clockevent registered
[ 15.513687] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 15.513857] hpet0: 3 64-bit timers, 14318180 Hz
[ 15.515426] Time: tsc clocksource has been installed.
[ 15.519660] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 15.519728] system 00:0b: ioport range 0xa00-0xadf has been reserved
[ 15.519777] system 00:0b: ioport range 0xae0-0xaef has been reserved
[ 15.519829] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[ 15.519879] system 00:0c: ioport range 0x800-0x87f has been reserved
[ 15.519927] system 00:0c: ioport range 0x400-0x41f has been reserved
[ 15.519976] system 00:0c: ioport range 0x480-0x4bf has been reserved
[ 15.520026] system 00:0c: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 15.520076] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 15.520126] system 00:0c: iomem range 0xffb80000-0xfffffffe could not be reserved
[ 15.520189] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 15.520240] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 15.520303] system 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 15.520357] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 15.520407] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[ 15.520459] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 15.520509] system 00:0f: iomem range 0x100000-0x3fffffff could not be reserved
[ 15.520569] system 00:0f: iomem range 0x0-0x0 could not be reserved
[ 15.550749] PCI: Bridge: 0000:00:01.0
[ 15.550795] IO window: disabled.
[ 15.550842] MEM window: cbc00000-cfcfffff
[ 15.550889] PREFETCH window: cff00000-efefffff
[ 15.550939] PCI: Bridge: 0000:00:1c.0
[ 15.550983] IO window: disabled.
[ 15.551031] MEM window: disabled.
[ 15.551077] PREFETCH window: disabled.
[ 15.551126] PCI: Bridge: 0000:00:1c.1
[ 15.551172] IO window: c000-cfff
[ 15.551219] MEM window: cfd00000-cfdfffff
[ 15.551267] PREFETCH window: disabled.
[ 15.551315] PCI: Bridge: 0000:00:1e.0
[ 15.551360] IO window: disabled.
[ 15.551408] MEM window: disabled.
[ 15.551455] PREFETCH window: disabled.
[ 15.551516] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.551612] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 15.551630] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.553353] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 15.553373] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 15.553467] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 15.553478] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 15.553488] NET: Registered protocol family 2
[ 15.562648] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.563000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 15.563652] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 15.564033] TCP: Hash tables configured (established 131072 bind 65536)
[ 15.564082] TCP reno registered
[ 15.567737] highmem bounce pool size: 64 pages
[ 15.570340] async_tx: api initialized (sync-only)
[ 15.570389] io scheduler noop registered
[ 15.570436] io scheduler anticipatory registered
[ 15.570483] io scheduler deadline registered
[ 15.570540] io scheduler cfq registered (default)
[ 15.570674] Boot video device is 0000:01:00.0
[ 15.570791] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 15.570831] assign_interrupt_mode Found MSI capability
[ 15.570879] Allocate Port Service[0000:00:01.0:pcie00]
[ 15.570966] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 15.571009] assign_interrupt_mode Found MSI capability
[ 15.571056] Allocate Port Service[0000:00:1c.0:pcie00]
[ 15.571096] Allocate Port Service[0000:00:1c.0:pcie02]
[ 15.571190] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 15.571233] assign_interrupt_mode Found MSI capability
[ 15.571281] Allocate Port Service[0000:00:1c.1:pcie00]
[ 15.571321] Allocate Port Service[0000:00:1c.1:pcie02]
[ 15.605284] input: Power Button (FF) as /devices/virtual/input/input0
[ 15.609580] ACPI: Power Button (FF) [PWRF]
[ 15.609724] input: Power Button (CM) as /devices/virtual/input/input1
[ 15.614563] ACPI: Power Button (CM) [PWRB]
[ 15.615038] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 15.615172] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 15.617841] Floppy drive(s): fd0 is 1.44M
[ 15.632218] FDC 0 is a post-1991 82077
[ 15.633925] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[ 15.634071] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 15.634123] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 15.634242] ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI slot 0000:00:1f.1
[ 15.634312] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 15.634409] ICH7: not 100% native mode: will probe irqs later
[ 15.634465] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[ 15.634598] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
[ 15.634723] Probing IDE interface ide0...
[ 16.014101] Switched to high resolution mode on CPU 0
[ 16.014277] Switched to high resolution mode on CPU 1
[ 16.918118] hda: TSSTcorpCD/DVDW SH-S182D, ATAPI CD/DVD-ROM drive
[ 16.918284] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 16.918546] hda: UDMA/33 mode selected
[ 16.918995] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 16.919134] Probing IDE interface ide1...
[ 17.442406] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 17.442648] Uniform CD-ROM driver Revision: 3.20
[ 17.445311] ide-floppy driver 0.99.newide
[ 17.445427] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 17.445566] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 17.445687] Driver 'sd' needs updating - please use bus_type methods
[ 17.445777] Driver 'sr' needs updating - please use bus_type methods
[ 17.446033] ata_piix 0000:00:1f.2: version 2.12
[ 17.446039] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 17.446259] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 17.446376] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 17.446431] scsi0 : ata_piix
[ 17.446547] scsi1 : ata_piix
[ 17.447924] ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 19
[ 17.447976] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 19
[ 17.617999] ata1.00: ATA-7: SAMSUNG SP1603C, VL100-50, max UDMA7
[ 17.618051] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 17.655989] ata1.00: configured for UDMA/133
[ 17.816956] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1603C VL10 PQ: 0 ANSI: 5
[ 17.817152] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 17.817215] sd 0:0:0:0: [sda] Write Protect is off
[ 17.817263] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.817284] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.817392] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 17.817453] sd 0:0:0:0: [sda] Write Protect is off
[ 17.817500] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.817521] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.817584] sda: sda1 sda2 sda3
[ 17.823222] sd 0:0:0:0: [sda] Attached SCSI disk
[ 17.823355] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 17.825012] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 17.827240] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.827292] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.827466] mice: PS/2 mouse device common for all mice
[ 17.853345] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 17.860319] md: linear personality registered for level -1
[ 17.860382] md: raid0 personality registered for level 0
[ 17.860433] md: raid1 personality registered for level 1
[ 17.876644] raid6: int32x1 707 MB/s
[ 17.893588] raid6: int32x2 835 MB/s
[ 17.910593] raid6: int32x4 687 MB/s
[ 17.927665] raid6: int32x8 539 MB/s
[ 17.944581] raid6: mmxx1 1742 MB/s
[ 17.961571] raid6: mmxx2 2066 MB/s
[ 17.978573] raid6: sse1x1 1097 MB/s
[ 17.995552] raid6: sse1x2 1953 MB/s
[ 18.012562] raid6: sse2x1 2125 MB/s
[ 18.029535] raid6: sse2x2 3214 MB/s
[ 18.029581] raid6: using algorithm sse2x2 (3214 MB/s)
[ 18.029628] md: raid6 personality registered for level 6
[ 18.029675] md: raid5 personality registered for level 5
[ 18.029723] md: raid4 personality registered for level 4
[ 18.029770] md: multipath personality registered for level -4
[ 18.029821] md: faulty personality registered for level -5
[ 18.029934] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 18.030016] TCP cubic registered
[ 18.030069] NET: Registered protocol family 1
[ 18.030128] NET: Registered protocol family 17
[ 18.030184] NET: Registered protocol family 4
[ 18.034799] Starting balanced_irq
[ 18.034870] Using IPI No-Shortcut mode
[ 18.517170] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 18.539473] md: Autodetecting RAID arrays.
[ 18.539521] md: Scanned 0 and added 0 devices.
[ 18.539567] md: autorun ...
[ 18.539615] md: ... autorun DONE.
[ 18.548941] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[ 18.549012] ReiserFS: sda3: using ordered data mode
[ 18.554280] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 18.554803] ReiserFS: sda3: checking transaction log (sda3)
[ 18.620360] ReiserFS: sda3: Using r5 hash to sort names
[ 18.620429] VFS: Mounted root (reiserfs filesystem) readonly.
[ 18.620619] Freeing unused kernel memory: 232k freed
[ 21.392941] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 21.392968] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 21.409305] intel_rng: FWH not detected
[ 21.420348] usbcore: registered new interface driver usbfs
[ 21.420387] usbcore: registered new interface driver hub
[ 21.423666] usbcore: registered new device driver usb
[ 21.446635] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 21.450939] Linux agpgart interface v0.102
[ 21.481227] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 21.481280] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 21.481301] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 21.482264] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 21.486233] ehci_hcd 0000:00:1d.7: debug port 1
[ 21.486247] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 21.486276] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcfe3bc00
[ 21.491898] nvidia: module license 'NVIDIA' taints kernel.
[ 21.495618] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.495810] usb usb1: configuration #1 chosen from 1 choice
[ 21.495848] hub 1-0:1.0: USB hub found
[ 21.495858] hub 1-0:1.0: 8 ports detected
[ 21.596836] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 21.596973] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 21.596999] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 21.597024] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 21.597040] r8169 0000:03:00.0: no MSI. Back to INTx.
[ 21.597406] eth0: RTL8168b/8111b at 0xf8906000, 00:19:db:a3:f2:a6, XID 38000000 IRQ 17
[ 21.754358] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 21.754371] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 21.754535] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.09 Fri Jan 11 14:38:28 PST 2008
[ 33.007123] Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k