rendered paste body[ 0.000000] Bootdata ok (command line is root=/dev/sda3 ro quiet splash)
[ 0.000000] Linux version 2.6.15-26-amd64-generic (buildd@king) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Mon Jul 17 19:50:04 UTC 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff10000 (usable)
[ 0.000000] BIOS-e820: 000000003ff10000 - 000000003ff20000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff20000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fad60
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x10000507 MSFT 0x00000097) @ 0x000000003ff10000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x10000507 MSFT 0x00000097) @ 0x000000003ff10200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x10000507 MSFT 0x00000097) @ 0x000000003ff10390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x10000507 MSFT 0x00000097) @ 0x000000003ff20040
[ 0.000000] ACPI: DSDT (v001 A0217 A0217001 0x00000001 INTL 0x02002026) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003ff10000
[ 0.000000] Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003ff10000
[ 0.000000] On node 0 totalpages: 257299
[ 0.000000] DMA zone: 3015 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 254284 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:7 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ da8c000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] No AGP bridge found
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/sda3 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[ 0.000000] time.c: Using 3.579545 MHz PM timer.
[ 0.000000] time.c: Detected 2200.199 MHz processor.
[ 12.623967] Console: colour VGA+ 80x25
[ 12.624642] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)[ 12.625146] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 12.634561] Memory: 1020312k/1047616k available (2150k kernel code, 26916k reserved, 757k data, 180k init)
[ 12.712450] Calibrating delay using timer specific routine.. 4405.06 BogoMIPS (lpj=8810128)
[ 12.712497] Security Framework v1.0.0 initialized
[ 12.712502] SELinux: Disabled at boot.
[ 12.712521] Mount-cache hash table entries: 256
[ 12.712626] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)[ 12.712628] CPU: L2 Cache: 1024K (64 bytes/line)
[ 12.712630] CPU 0(1) -> Node 0 -> Core 0
[ 12.712637] mtrr: v2.0 (20020519)
[ 12.712644] SMP alternatives: switching to UP code
[ 12.712910] checking if image is initramfs... it is
[ 13.209764] Freeing initrd memory: 7097k freed
[ 13.214527] ACPI: Looking for DSDT ... not found!
[ 13.214872] ACPI-0312: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43005350
[ 13.214882] ACPI-0312: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43005350
[ 13.215598] ACPI-0312: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43005350
[ 13.215608] ACPI-0312: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43005350
[ 13.256395] Using local APIC timer interrupts.
[ 13.301808] Detected 12.501 MHz APIC timer.
[ 13.301859] Brought up 1 CPUs
[ 13.301879] time.c: Using PIT/TSC based timekeeping.
[ 13.301880] testing NMI watchdog ... OK.
[ 13.342099] NET: Registered protocol family 16
[ 13.342118] ACPI: bus type pci registered
[ 13.342124] PCI: Using configuration type 1
[ 13.342493] ACPI: Subsystem revision 20051216
[ 13.347404] ACPI: Interpreter enabled
[ 13.347406] ACPI: Using IOAPIC for interrupt routing
[ 13.348109] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 13.348111] PCI: Probing PCI hardware (bus 00)
[ 13.351453] Boot video device is 0000:03:00.0
[ 13.351600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 13.366962] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 13.367177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 13.367860] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 13.368057] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 13.368368] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 13.368558] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 13.368750] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 13.368939] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 13.369130] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 13.369319] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
[ 13.369382] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.369388] pnp: PnP ACPI init
[ 13.374176] pnp: PnP ACPI: found 15 devices
[ 13.374186] PCI: Using ACPI for IRQ routing
[ 13.374188] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 13.374261] PCI-DMA: Disabling IOMMU.
[ 13.374941] pnp: 00:09: ioport range 0xc00-0xc0f has been reserved
[ 13.374944] pnp: 00:09: ioport range 0xd00-0xd0f has been reserved
[ 13.374946] pnp: 00:09: ioport range 0xa20-0xa2f has been reserved
[ 13.374949] pnp: 00:09: ioport range 0xa30-0xa3f has been reserved
[ 13.375086] PCI: Bridge: 0000:00:01.0
[ 13.375089] IO window: e000-efff
[ 13.375093] MEM window: ddf00000-dfffffff
[ 13.375096] PREFETCH window: c0000000-dcffffff
[ 13.375100] PCI: Bridge: 0000:00:06.0
[ 13.375102] IO window: d000-dfff
[ 13.375105] MEM window: disabled.
[ 13.375107] PREFETCH window: disabled.
[ 13.375110] PCI: Bridge: 0000:00:07.0
[ 13.375113] IO window: c000-cfff
[ 13.375116] MEM window: disabled.
[ 13.375118] PREFETCH window: disabled.
[ 13.375133] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 13.375142] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 13.375150] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 13.375330] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 13.375564] audit: initializing netlink socket (disabled)
[ 13.375572] audit(1153540784.752:1): initialized
[ 13.375679] VFS: Disk quotas dquot_6.5.1
[ 13.375695] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 13.375734] Initializing Cryptographic API
[ 13.375738] io scheduler noop registered
[ 13.375744] io scheduler anticipatory registered
[ 13.375749] io scheduler deadline registered
[ 13.375761] io scheduler cfq registered
[ 21.370621] 0000:00:03.3 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[ 21.371452] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 21.371457] pcie_portdrv_probe->Dev[0004:1039] has invalid IRQ. Check vendor BIOS
[ 21.371481] assign_interrupt_mode Found MSI capability
[ 21.371518] Allocate Port Service[pcie00]
[ 21.381916] Real Time Clock Driver v1.12
[ 21.381945] Linux agpgart interface v0.101 (c) Dave Jones
[ 21.382020] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 21.382124] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.382140] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.382144] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 21.382260] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.383754] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.384088] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 21.384124] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 21.384127] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 21.384291] mice: PS/2 mouse device common for all mice
[ 21.384347] NET: Registered protocol family 2
[ 21.409102] input: AT Translated Set 2 keyboard as /class/input/input0
[ 21.426624] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)[ 21.426860] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 21.428122] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 21.428762] TCP: Hash tables configured (established 131072 bind 65536)
[ 21.428764] TCP reno registered
[ 21.428840] TCP bic registered
[ 21.428846] NET: Registered protocol family 1
[ 21.428852] NET: Registered protocol family 8
[ 21.428854] NET: Registered protocol family 20
[ 21.428986] ACPI wakeup devices:
[ 21.428987] PS2K PS2M UAR1 EUSB USB USB2 USB3 AC97 P0P6 P0P7 LAN
[ 21.428993] ACPI: (supports S0 S1 S3 S4 S5)
[ 21.429040] Freeing unused kernel memory: 180k freed
[ 21.460016] vga16fb: initializing
[ 21.460020] vga16fb: mapped to 0xffff8100000a0000
[ 21.613787] Console: switching to colour frame buffer device 80x25
[ 21.613791] fb0: VGA16 VGA frame buffer device
[ 22.678115] Capability LSM initialized
[ 23.207294] SIS5513: IDE controller at PCI slot 0000:00:02.5
[ 23.207314] SIS5513: chipset revision 1
[ 23.207316] SIS5513: not 100% native mode: will probe irqs later
[ 23.207319] SIS5513: SiS965 ATA 133 (2nd gen) controller
[ 23.207328] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[ 23.207338] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[ 23.207345] Probing IDE interface ide0...
[ 23.776470] Probing IDE interface ide1...
[ 24.511972] hdc: PLEXTOR CD-R PX-W8432T, ATAPI CD/DVD-ROM drive
[ 25.295271] hdd: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive
[ 25.351245] ide1 at 0x170-0x177,0x376 on irq 15
[ 25.359566] hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA
[ 25.359572] Uniform CD-ROM driver Revision: 3.20
[ 25.361314] hdd: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(66)
[ 25.397624] SCSI subsystem initialized
[ 25.399058] ACPI: bus type scsi registered
[ 25.399060] libata version 1.20 loaded.
[ 25.400268] sata_sis 0000:00:05.0: version 0.5
[ 25.400284] GSI 16 sharing vector 0xB9 and IRQ 16
[ 25.400287] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 185
[ 25.400298] sata_sis 0000:00:05.0: Detected SiS 182 chipset
[ 25.400337] ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA000 irq 185
[ 25.400354] ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0xA008 irq 185
[ 25.611007] ata1: dev 0 cfg 00:0040 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e21 87:4663 88:007f 93:0000
[ 25.611011] ata1: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[ 25.611605] sata_get_dev_handle: SATA dev addr=0x50000, handle=0xffff810037fde740
[ 25.617274] ata1: dev 0 configured for UDMA/133
[ 25.617827] sata_get_dev_handle: SATA dev addr=0x50000, handle=0xffff810037fde740
[ 25.622578] scsi0 : sata_sis
[ 30.718260] ata2: no device found (phy stat 00000001)
[ 30.718262] scsi1 : sata_sis
[ 30.718405] Vendor: ATA Model: Maxtor 6L300S0 Rev: BANC
[ 30.718411] Type: Direct-Access ANSI SCSI revision: 05
[ 30.723269] Driver 'sd' needs updating - please use bus_type methods
[ 30.723857] SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
[ 30.723869] SCSI device sda: drive cache: write back
[ 30.725912] SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
[ 30.725929] SCSI device sda: drive cache: write back
[ 30.725934] sda: sda1 sda2 sda3 sda4
[ 30.765404] sd 0:0:0:0: Attached scsi disk sda
[ 31.031026] usbcore: registered new driver usbfs
[ 31.031224] usbcore: registered new driver hub
[ 31.032349] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 31.032563] GSI 17 sharing vector 0xC1 and IRQ 17
[ 31.032566] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 193
[ 31.032846] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 31.070242] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 31.070252] ohci_hcd 0000:00:03.0: irq 193, io mem 0xddeb8000
[ 31.128073] hub 1-0:1.0: USB hub found
[ 31.128081] hub 1-0:1.0: 3 ports detected
[ 31.229895] GSI 18 sharing vector 0xC9 and IRQ 18
[ 31.229898] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 201
[ 31.230075] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 31.253917] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 31.253926] ohci_hcd 0000:00:03.1: irq 201, io mem 0xddeb9000
[ 31.311904] hub 2-0:1.0: USB hub found
[ 31.311912] hub 2-0:1.0: 3 ports detected
[ 31.413728] GSI 19 sharing vector 0xD1 and IRQ 19
[ 31.413731] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 209
[ 31.413839] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 31.437761] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 31.437770] ohci_hcd 0000:00:03.2: irq 209, io mem 0xddeba000
[ 31.495742] hub 3-0:1.0: USB hub found
[ 31.495750] hub 3-0:1.0: 2 ports detected
[ 31.599219] GSI 20 sharing vector 0xD9 and IRQ 20
[ 31.599223] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 217
[ 31.599559] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 31.599590] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[ 31.599761] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[ 31.599770] ehci_hcd 0000:00:03.3: irq 217, io mem 0xddebb000
[ 31.599779] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 31.599951] hub 4-0:1.0: USB hub found
[ 31.599957] hub 4-0:1.0: 8 ports detected
[ 31.711195] Probing IDE interface ide0...
[ 32.303842] Attempting manual resume
[ 32.311385] kjournald starting. Commit interval 5 seconds
[ 32.311394] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.404757] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 40.115331] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 40.833490] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 40.839002] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.116934] nvidia: module license 'NVIDIA' taints kernel.
[ 41.120383] GSI 21 sharing vector 0xE1 and IRQ 21
[ 41.120387] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 225
[ 41.120394] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 41.120539] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8762 Mon May 15 13:58:14 PDT 2006
[ 41.584706] input: PC Speaker as /class/input/input1
[ 41.660513] logips2pp: Detected unknown logitech mouse model 1
[ 41.743746] Floppy drive(s): fd0 is 1.44M
[ 41.779297] FDC 0 is a post-1991 82077
[ 41.779606] Linux video capture interface: v1.00
[ 41.811583] parport: PnPBIOS parport detected.
[ 41.811625] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 41.820327] drivers/usb/media/spca5xx/spca5xx-main.c: USB SPCA5XX camera found. Type Creative Instant P0620
[ 41.844834] input: PS/2 Logitech Mouse as /class/input/input2
[ 41.900218] usbcore: registered new driver spca5xx
[ 41.900222] drivers/usb/media/spca5xx/spca5xx-main.c: spca5xx driver 00.57.08 registered
[ 41.917947] ts: Compaq touchscreen protocol output
[ 41.960826] Intel(R) PRO/1000 Network Driver - version 7.0.33-k2
[ 41.960829] Copyright (c) 1999-2005 Intel Corporation.
[ 41.960870] GSI 22 sharing vector 0xE9 and IRQ 22
[ 41.960873] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 233
[ 42.216949] e1000: 0000:00:0b.0: e1000_probe: (PCI:33MHz:32-bit) 00:15:f2:4f:eb:fc
[ 42.217715] GSI 23 sharing vector 0x32 and IRQ 23
[ 42.217719] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 50
[ 42.252571] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 42.535678] intel8x0_measure_ac97_clock: measured 55831 usecs
[ 42.535681] intel8x0: clocking to 48000
[ 42.889601] lp0: using parport0 (interrupt-driven).
[ 42.940424] Adding 1052248k swap on /dev/sda4. Priority:-1 extents:1 across:1052248k
[ 43.078675] EXT3 FS on sda3, internal journal
[ 43.198947] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 43.198951] md: bitmap version 4.39
[ 43.419891] NET: Registered protocol family 17
[ 43.646995] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 43.911426] cdrom: open failed.
[ 44.126614] e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
[ 44.175151] cdrom: open failed.
[ 44.177143] cdrom: open failed.
[ 44.484051] NTFS driver 2.1.25 [Flags: R/O MODULE].
[ 44.540757] NTFS volume version 3.1.
[ 44.580993] NTFS volume version 3.1.
[ 51.617266] ACPI: Power Button (FF) [PWRF]
[ 51.617284] ACPI: Power Button (CM) [PWRB]
[ 51.681573] ibm_acpi: ec object not found
[ 51.707639] pcc_acpi: loading...
[ 52.123728] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[ 52.125156] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 55.865452] ppdev: user-space parallel port driver
[ 59.047491] Bluetooth: Core ver 2.8
[ 59.047495] NET: Registered protocol family 31
[ 59.047497] Bluetooth: HCI device and connection manager initialized
[ 59.047505] Bluetooth: HCI socket layer initialized
[ 59.063702] Bluetooth: L2CAP ver 2.8
[ 59.063705] Bluetooth: L2CAP socket layer initialized
[ 59.078357] Bluetooth: RFCOMM socket layer initialized
[ 59.078371] Bluetooth: RFCOMM TTY layer initialized
[ 59.078373] Bluetooth: RFCOMM ver 1.7
[ 59.742783] NET: Registered protocol family 10
[ 59.742880] lo: Disabled Privacy Extensions
[ 59.743057] IPv6 over IPv4 tunneling driver
[ 70.059042] eth0: no IPv6 routers present