rendered paste bodyMar 23 15:19:52 skynet syslogd 1.4.1#21ubuntu3: restart.
Mar 23 15:19:52 skynet kernel: Inspecting /boot/System.map-2.6.22-14-generic
Mar 23 15:19:53 skynet kernel: Loaded 25445 symbols from /boot/System.map-2.6.22-14-generic.
Mar 23 15:19:53 skynet kernel: Symbols match kernel version 2.6.22.
Mar 23 15:19:53 skynet kernel: No module symbols loaded - kernel modules not enabled.
Mar 23 15:19:53 skynet kernel: [ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
Mar 23 15:19:53 skynet kernel: [ 0.000000] BIOS-provided physical RAM map:
Mar 23 15:19:53 skynet kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 23 15:19:53 skynet kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 23 15:19:53 skynet kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 23 15:19:53 skynet kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Mar 23 15:19:53 skynet kernel: [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
Mar 23 15:19:53 skynet kernel: [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
Mar 23 15:19:53 skynet kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Mar 23 15:19:53 skynet kernel: [ 0.000000] 0MB HIGHMEM available.
Mar 23 15:19:53 skynet kernel: [ 0.000000] 511MB LOWMEM available.
Mar 23 15:19:53 skynet kernel: [ 0.000000] Zone PFN ranges:
Mar 23 15:19:53 skynet kernel: [ 0.000000] DMA 0 -> 4096
Mar 23 15:19:53 skynet kernel: [ 0.000000] Normal 4096 -> 131056
Mar 23 15:19:53 skynet kernel: [ 0.000000] HighMem 131056 -> 131056
Mar 23 15:19:53 skynet kernel: [ 0.000000] early_node_map[1] active PFN ranges
Mar 23 15:19:53 skynet kernel: [ 0.000000] 0: 0 -> 131056
Mar 23 15:19:53 skynet kernel: [ 0.000000] DMI 2.2 present.
Mar 23 15:19:53 skynet kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F76E0 checksum 0
Mar 23 15:19:53 skynet kernel: [ 0.000000] ACPI: RSDP 000F76E0, 0014 (r0 VIA694)
Mar 23 15:19:53 skynet kernel: [ 0.000000] ACPI: RSDT 1FFF3000, 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
Mar 23 15:19:53 skynet kernel: [ 0.000000] ACPI: FACP 1FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
Mar 23 15:19:53 skynet kernel: [ 0.000000] ACPI: DSDT 1FFF30C0, 2313 (r1 VIA694 AWRDACPI 1000 MSFT 100000C)
Mar 23 15:19:53 skynet kernel: [ 0.000000] ACPI: FACS 1FFF0000, 0040
Mar 23 15:19:53 skynet kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
Mar 23 15:19:53 skynet kernel: [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
Mar 23 15:19:53 skynet kernel: [ 0.000000] Built 1 zonelists. Total pages: 130033
Mar 23 15:19:53 skynet kernel: [ 0.000000] Kernel command line: root=UUID=030e30e7-e4db-42e2-90bb-defb37e0dbed ro quiet splash
Mar 23 15:19:53 skynet kernel: [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
Mar 23 15:19:53 skynet kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Mar 23 15:19:53 skynet kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Mar 23 15:19:53 skynet kernel: [ 0.000000] Initializing CPU#0
Mar 23 15:19:53 skynet kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
Mar 23 15:19:53 skynet kernel: [ 0.000000] Detected 798.003 MHz processor.
Mar 23 15:19:53 skynet kernel: [ 40.170284] Console: colour VGA+ 80x25
Mar 23 15:19:53 skynet kernel: [ 40.170895] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 23 15:19:53 skynet kernel: [ 40.172295] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 23 15:19:53 skynet kernel: [ 40.233277] Memory: 507916k/524224k available (2015k kernel code, 15716k reserved, 916k data, 364k init, 0k highmem)
Mar 23 15:19:53 skynet kernel: [ 40.233303] virtual kernel memory layout:
Mar 23 15:19:53 skynet kernel: [ 40.233307] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
Mar 23 15:19:53 skynet kernel: [ 40.233310] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Mar 23 15:19:53 skynet kernel: [ 40.233314] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
Mar 23 15:19:53 skynet kernel: [ 40.233318] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
Mar 23 15:19:53 skynet kernel: [ 40.233322] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
Mar 23 15:19:53 skynet kernel: [ 40.233325] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
Mar 23 15:19:53 skynet kernel: [ 40.233329] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
Mar 23 15:19:53 skynet kernel: [ 40.233338] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar 23 15:19:53 skynet kernel: [ 40.233425] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Mar 23 15:19:53 skynet kernel: [ 40.313449] Calibrating delay using timer specific routine.. 1598.09 BogoMIPS (lpj=3196188)
Mar 23 15:19:53 skynet kernel: [ 40.313506] Security Framework v1.0.0 initialized
Mar 23 15:19:53 skynet kernel: [ 40.313524] SELinux: Disabled at boot.
Mar 23 15:19:53 skynet kernel: [ 40.313559] Mount-cache hash table entries: 512
Mar 23 15:19:53 skynet kernel: [ 40.313850] CPU: L1 I cache: 16K, L1 D cache: 16K
Mar 23 15:19:53 skynet kernel: [ 40.313857] CPU: L2 cache: 256K
Mar 23 15:19:53 skynet kernel: [ 40.313887] Compat vDSO mapped to ffffe000.
Mar 23 15:19:53 skynet kernel: [ 40.313917] Checking 'hlt' instruction... OK.
Mar 23 15:19:53 skynet kernel: [ 40.329667] SMP alternatives: switching to UP code
Mar 23 15:19:53 skynet kernel: [ 40.330074] Freeing SMP alternatives: 11k freed
Mar 23 15:19:53 skynet kernel: [ 40.330812] Early unpacking initramfs... done
Mar 23 15:19:53 skynet kernel: [ 41.201225] ACPI: Core revision 20070126
Mar 23 15:19:53 skynet kernel: [ 41.201567] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Mar 23 15:19:53 skynet kernel: [ 41.204048] ACPI: setting ELCR to 0200 (from 0e20)
Mar 23 15:19:53 skynet kernel: [ 41.206051] CPU0: Intel Pentium III (Coppermine) stepping 06
Mar 23 15:19:53 skynet kernel: [ 41.206068] SMP motherboard not detected.
Mar 23 15:19:53 skynet kernel: [ 41.206075] Local APIC not detected. Using dummy APIC emulation.
Mar 23 15:19:53 skynet kernel: [ 41.206204] Brought up 1 CPUs
Mar 23 15:19:53 skynet kernel: [ 41.206585] Booting paravirtualized kernel on bare hardware
Mar 23 15:19:53 skynet kernel: [ 41.206759] Time: 15:18:59 Date: 02/23/108
Mar 23 15:19:53 skynet kernel: [ 41.206847] NET: Registered protocol family 16
Mar 23 15:19:53 skynet kernel: [ 41.207185] EISA bus registered
Mar 23 15:19:53 skynet kernel: [ 41.207219] ACPI: bus type pci registered
Mar 23 15:19:53 skynet kernel: [ 41.239671] PCI: PCI BIOS revision 2.10 entry at 0xfb060, last bus=1
Mar 23 15:19:53 skynet kernel: [ 41.239678] PCI: Using configuration type 1
Mar 23 15:19:53 skynet kernel: [ 41.239683] Setting up standard PCI resources
Mar 23 15:19:53 skynet kernel: [ 41.248995] ACPI: Interpreter enabled
Mar 23 15:19:53 skynet kernel: [ 41.249006] ACPI: (supports S0 S1 S4 S5)
Mar 23 15:19:53 skynet kernel: [ 41.249048] ACPI: Using PIC for interrupt routing
Mar 23 15:19:53 skynet kernel: [ 41.258359] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 23 15:19:53 skynet kernel: [ 41.258805] PCI quirk: region 4000-40ff claimed by vt82c586 ACPI
Mar 23 15:19:53 skynet kernel: [ 41.258815] PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
Mar 23 15:19:53 skynet kernel: [ 41.258822] PCI quirk: region 5000-500f claimed by vt82c686 SMB
Mar 23 15:19:53 skynet kernel: [ 41.288413] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Mar 23 15:19:53 skynet kernel: [ 41.288701] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mar 23 15:19:53 skynet kernel: [ 41.289042] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Mar 23 15:19:53 skynet kernel: [ 41.289419] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Mar 23 15:19:53 skynet kernel: [ 41.289643] Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 23 15:19:53 skynet kernel: [ 41.289688] pnp: PnP ACPI init
Mar 23 15:19:53 skynet kernel: [ 41.289715] ACPI: bus type pnp registered
Mar 23 15:19:53 skynet kernel: [ 41.295930] pnp: PnP ACPI: found 13 devices
Mar 23 15:19:53 skynet kernel: [ 41.295939] ACPI: ACPI bus type pnp unregistered
Mar 23 15:19:53 skynet kernel: [ 41.295951] PnPBIOS: Disabled by ACPI PNP
Mar 23 15:19:53 skynet kernel: [ 41.296118] PCI: Using ACPI for IRQ routing
Mar 23 15:19:53 skynet kernel: [ 41.296127] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Mar 23 15:19:53 skynet kernel: [ 41.344674] NET: Registered protocol family 8
Mar 23 15:19:53 skynet kernel: [ 41.344681] NET: Registered protocol family 20
Mar 23 15:19:53 skynet kernel: [ 41.344866] pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
Mar 23 15:19:53 skynet kernel: [ 41.344876] pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
Mar 23 15:19:53 skynet kernel: [ 41.344884] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
Mar 23 15:19:53 skynet kernel: [ 41.344892] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
Mar 23 15:19:53 skynet kernel: [ 41.345295] Time: tsc clocksource has been installed.
Mar 23 15:19:53 skynet kernel: [ 41.375746] PCI: Bridge: 0000:00:01.0
Mar 23 15:19:53 skynet kernel: [ 41.375753] IO window: c000-cfff
Mar 23 15:19:53 skynet kernel: [ 41.375763] MEM window: d8000000-d9ffffff
Mar 23 15:19:53 skynet kernel: [ 41.375771] PREFETCH window: d4000000-d7ffffff
Mar 23 15:19:53 skynet kernel: [ 41.375831] NET: Registered protocol family 2
Mar 23 15:19:53 skynet kernel: [ 41.413388] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Mar 23 15:19:53 skynet kernel: [ 41.413519] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
Mar 23 15:19:53 skynet kernel: [ 41.414450] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
Mar 23 15:19:53 skynet kernel: [ 41.415447] TCP: Hash tables configured (established 16384 bind 16384)
Mar 23 15:19:53 skynet kernel: [ 41.415458] TCP reno registered
Mar 23 15:19:53 skynet kernel: [ 41.425804] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
Mar 23 15:19:53 skynet kernel: [ 42.146311] it is
Mar 23 15:19:53 skynet kernel: [ 43.039764] Freeing initrd memory: 7342k freed
Mar 23 15:19:53 skynet kernel: [ 43.040976] audit: initializing netlink socket (disabled)
Mar 23 15:19:53 skynet kernel: [ 43.041024] audit(1206285540.616:1): initialized
Mar 23 15:19:53 skynet kernel: [ 43.047239] VFS: Disk quotas dquot_6.5.1
Mar 23 15:19:53 skynet kernel: [ 43.047439] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 23 15:19:53 skynet kernel: [ 43.047760] io scheduler noop registered
Mar 23 15:19:53 skynet kernel: [ 43.047768] io scheduler anticipatory registered
Mar 23 15:19:53 skynet kernel: [ 43.047774] io scheduler deadline registered
Mar 23 15:19:53 skynet kernel: [ 43.047834] io scheduler cfq registered (default)
Mar 23 15:19:53 skynet kernel: [ 43.047877] PCI: VIA PCI bridge detected. Disabling DAC.
Mar 23 15:19:53 skynet kernel: [ 43.047885] PCI: Disabling Via external APIC routing
Mar 23 15:19:53 skynet kernel: [ 43.048374] isapnp: Scanning for PnP cards...
Mar 23 15:19:53 skynet kernel: [ 43.403085] isapnp: No Plug & Play device found
Mar 23 15:19:53 skynet kernel: [ 43.479658] Real Time Clock Driver v1.12ac
Mar 23 15:19:53 skynet kernel: [ 43.479868] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Mar 23 15:19:53 skynet kernel: [ 43.480086] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 23 15:19:53 skynet kernel: [ 43.480558] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 23 15:19:53 skynet kernel: [ 43.482204] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 23 15:19:53 skynet kernel: [ 43.482816] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 23 15:19:53 skynet kernel: [ 43.484741] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Mar 23 15:19:53 skynet kernel: [ 43.485473] input: Macintosh mouse button emulation as /class/input/input0
Mar 23 15:19:53 skynet kernel: [ 43.485709] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Mar 23 15:19:53 skynet kernel: [ 43.486237] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 23 15:19:53 skynet kernel: [ 43.486250] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 23 15:19:53 skynet kernel: [ 43.486679] mice: PS/2 mouse device common for all mice
Mar 23 15:19:53 skynet kernel: [ 43.487004] EISA: Probing bus 0 at eisa.0
Mar 23 15:19:53 skynet kernel: [ 43.487043] Cannot allocate resource for EISA slot 4
Mar 23 15:19:53 skynet kernel: [ 43.487049] Cannot allocate resource for EISA slot 5
Mar 23 15:19:53 skynet kernel: [ 43.487055] Cannot allocate resource for EISA slot 6
Mar 23 15:19:53 skynet kernel: [ 43.487073] EISA: Detected 0 cards.
Mar 23 15:19:53 skynet kernel: [ 43.487534] TCP cubic registered
Mar 23 15:19:53 skynet kernel: [ 43.487578] NET: Registered protocol family 1
Mar 23 15:19:53 skynet kernel: [ 43.487647] Using IPI No-Shortcut mode
Mar 23 15:19:53 skynet kernel: [ 43.488057] Magic number: 0:571:336
Mar 23 15:19:53 skynet kernel: [ 43.488102] hash matches device ttyzb
Mar 23 15:19:53 skynet kernel: [ 43.488251] hash matches device tty57
Mar 23 15:19:53 skynet kernel: [ 43.489209] Freeing unused kernel memory: 364k freed
Mar 23 15:19:53 skynet kernel: [ 43.524979] input: AT Translated Set 2 keyboard as /class/input/input1
Mar 23 15:19:53 skynet kernel: [ 45.060163] AppArmor: AppArmor initialized<5>audit(1206285542.616:2): type=1505 info="AppArmor initialized" pid=1160
Mar 23 15:19:53 skynet kernel: [ 45.078324] fuse init (API version 7.8)
Mar 23 15:19:53 skynet kernel: [ 45.092064] Failure registering capabilities with primary security module.
Mar 23 15:19:53 skynet kernel: [ 45.129760] ACPI: CPU0 (power states: C1[C1] C2[C2])
Mar 23 15:19:53 skynet kernel: [ 45.129775] ACPI: Processor [CPU0] (supports 2 throttling states)
Mar 23 15:19:53 skynet kernel: [ 46.683708] SCSI subsystem initialized
Mar 23 15:19:53 skynet kernel: [ 46.732631] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 23 15:19:53 skynet kernel: [ 46.732648] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 23 15:19:53 skynet kernel: [ 46.735010] VP_IDE: IDE controller at PCI slot 0000:00:07.1
Mar 23 15:19:53 skynet kernel: [ 46.735050] VP_IDE: chipset revision 16
Mar 23 15:19:53 skynet kernel: [ 46.735056] VP_IDE: not 100%% native mode: will probe irqs later
Mar 23 15:19:53 skynet kernel: [ 46.735076] VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
Mar 23 15:19:53 skynet kernel: [ 46.735091] ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
Mar 23 15:19:53 skynet kernel: [ 46.735114] ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
Mar 23 15:19:53 skynet kernel: [ 46.810553] usbcore: registered new interface driver usbfs
Mar 23 15:19:53 skynet kernel: [ 46.810617] usbcore: registered new interface driver hub
Mar 23 15:19:53 skynet kernel: [ 46.810676] usbcore: registered new device driver usb
Mar 23 15:19:53 skynet kernel: [ 46.814553] USB Universal Host Controller Interface driver v3.0
Mar 23 15:19:53 skynet kernel: [ 46.924728] 8139too Fast Ethernet driver 0.9.28
Mar 23 15:19:53 skynet kernel: [ 47.228118] hda: ST3160815A, ATA DISK drive
Mar 23 15:19:53 skynet kernel: [ 47.289165] FDC 0 is a post-1991 82077
Mar 23 15:19:53 skynet kernel: [ 7.184000] Marking TSC unstable due to: possible TSC halt in C2.
Mar 23 15:19:53 skynet kernel: [ 7.212000] Time: acpi_pm clocksource has been installed.
Mar 23 15:19:53 skynet kernel: [ 7.672000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 23 15:19:53 skynet kernel: [ 8.536000] hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
Mar 23 15:19:53 skynet kernel: [ 9.208000] ide1 at 0x170-0x177,0x376 on irq 15
Mar 23 15:19:53 skynet kernel: [ 9.208000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
Mar 23 15:19:53 skynet kernel: [ 9.208000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Mar 23 15:19:53 skynet kernel: [ 9.208000] uhci_hcd 0000:00:07.2: UHCI Host Controller
Mar 23 15:19:53 skynet kernel: [ 9.208000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Mar 23 15:19:53 skynet kernel: [ 9.208000] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400
Mar 23 15:19:53 skynet kernel: [ 9.212000] usb usb1: configuration #1 chosen from 1 choice
Mar 23 15:19:53 skynet kernel: [ 9.212000] hub 1-0:1.0: USB hub found
Mar 23 15:19:53 skynet kernel: [ 9.212000] hub 1-0:1.0: 2 ports detected
Mar 23 15:19:53 skynet kernel: [ 9.232000] hda: max request size: 512KiB
Mar 23 15:19:53 skynet kernel: [ 9.272000] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(66)
Mar 23 15:19:53 skynet kernel: [ 9.296000] hda: cache flushes supported
Mar 23 15:19:53 skynet kernel: [ 9.296000] hda:<6>ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Mar 23 15:19:53 skynet kernel: [ 9.316000] uhci_hcd 0000:00:07.3: UHCI Host Controller
Mar 23 15:19:53 skynet kernel: [ 9.316000] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
Mar 23 15:19:53 skynet kernel: [ 9.316000] uhci_hcd 0000:00:07.3: irq 10, io base 0x0000d800
Mar 23 15:19:53 skynet kernel: [ 9.316000] usb usb2: configuration #1 chosen from 1 choice
Mar 23 15:19:53 skynet kernel: [ 9.316000] hub 2-0:1.0: USB hub found
Mar 23 15:19:53 skynet kernel: [ 9.316000] hub 2-0:1.0: 2 ports detected
Mar 23 15:19:53 skynet kernel: [ 9.320000] hda1 hda2 hda3 hda4
Mar 23 15:19:53 skynet kernel: [ 9.404000] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Mar 23 15:19:53 skynet kernel: [ 9.404000] Uniform CD-ROM driver Revision: 3.20
Mar 23 15:19:53 skynet kernel: [ 9.440000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Mar 23 15:19:53 skynet kernel: [ 9.440000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Mar 23 15:19:53 skynet kernel: [ 9.440000] eth0: RealTek RTL8139 at 0xe083a000, 00:40:95:08:f6:a8, IRQ 11
Mar 23 15:19:53 skynet kernel: [ 9.456000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Mar 23 15:19:53 skynet kernel: [ 9.684000] usb 1-2: new full speed USB device using uhci_hcd and address 2
Mar 23 15:19:53 skynet kernel: [ 9.804000] Attempting manual resume
Mar 23 15:19:53 skynet kernel: [ 9.852000] usb 1-2: configuration #1 chosen from 1 choice
Mar 23 15:19:53 skynet kernel: [ 9.952000] kjournald starting. Commit interval 5 seconds
Mar 23 15:19:53 skynet kernel: [ 9.952000] EXT3-fs: mounted filesystem with ordered data mode.
Mar 23 15:19:53 skynet kernel: [ 16.212000] eth0: link down
Mar 23 15:19:53 skynet kernel: [ 17.508000] NET: Registered protocol family 10
Mar 23 15:19:53 skynet kernel: [ 17.508000] lo: Disabled Privacy Extensions
Mar 23 15:19:53 skynet kernel: [ 17.508000] ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 23 15:19:53 skynet kernel: [ 20.408000] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
Mar 23 15:19:53 skynet kernel: [ 20.428000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 23 15:19:53 skynet kernel: [ 20.444000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Mar 23 15:19:53 skynet kernel: [ 20.540000] Linux agpgart interface v0.102 (c) Dave Jones
Mar 23 15:19:53 skynet kernel: [ 20.584000] parport_pc: VIA parallel port: io=0x378, irq=7
Mar 23 15:19:53 skynet kernel: [ 20.996000] agpgart: Detected VIA Apollo Pro 133 chipset
Mar 23 15:19:53 skynet kernel: [ 21.000000] agpgart: AGP aperture is 64M @ 0xd0000000
Mar 23 15:19:53 skynet kernel: [ 21.052000] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Mar 23 15:19:53 skynet kernel: [ 21.064000] flexcop-pci: will use the HW PID filter.
Mar 23 15:19:53 skynet kernel: [ 21.064000] flexcop-pci: card revision 2
Mar 23 15:19:53 skynet kernel: [ 21.064000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Mar 23 15:19:53 skynet kernel: [ 21.080000] DVB: registering new adapter (FlexCop Digital TV device).
Mar 23 15:19:53 skynet kernel: [ 21.080000] b2c2-flexcop: MAC address = 00:d0:d7:0c:9e:cd
Mar 23 15:19:53 skynet kernel: [ 22.080000] input: PC Speaker as /class/input/input2
Mar 23 15:19:53 skynet kernel: [ 23.316000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
Mar 23 15:19:53 skynet kernel: [ 23.768000] b2c2-flexcop: found the stv0299 at i2c address: 0x68
Mar 23 15:19:53 skynet kernel: [ 23.768000] DVB: registering frontend 0 (ST STV0299 DVB-S)...
Mar 23 15:19:53 skynet kernel: [ 23.768000] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Mar 23 15:19:53 skynet kernel: [ 23.772000] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Mar 23 15:19:53 skynet kernel: [ 24.748000] ndiswrapper version 1.45 loaded (smp=yes)
Mar 23 15:19:53 skynet kernel: [ 24.924000] usb 1-2: reset full speed USB device using uhci_hcd and address 2
Mar 23 15:19:53 skynet kernel: [ 25.116000] ndiswrapper: driver net8187b (Realtek Semiconductor Corp.,07/18/2007,5.1097.0718.2007) loaded
Mar 23 15:19:53 skynet kernel: [ 29.884000] wlan0: ethernet device 00:14:d1:48:5d:04 using NDIS driver: net8187b, version: 0x1, NDIS version: 0x500, vendor: 'Realtek RTL8187 Wireless LAN USB NIC ', 0BDA:8189.F.conf
Mar 23 15:19:53 skynet kernel: [ 29.884000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
Mar 23 15:19:53 skynet kernel: [ 29.884000] usbcore: registered new interface driver ndiswrapper
Mar 23 15:19:53 skynet kernel: [ 29.976000] lp0: using parport0 (interrupt-driven).
Mar 23 15:19:53 skynet kernel: [ 30.156000] Adding 1004052k swap on /dev/hda4. Priority:-1 extents:1 across:1004052k
Mar 23 15:19:53 skynet kernel: [ 30.388000] NET: Registered protocol family 17
Mar 23 15:19:53 skynet kernel: [ 30.848000] EXT3 FS on hda2, internal journal
Mar 23 15:19:53 skynet kernel: [ 31.772000] kjournald starting. Commit interval 5 seconds
Mar 23 15:19:53 skynet kernel: [ 31.772000] EXT3 FS on hda3, internal journal
Mar 23 15:19:53 skynet kernel: [ 31.772000] EXT3-fs: mounted filesystem with ordered data mode.
Mar 23 15:20:04 skynet vdr: [4635] VDR version 1.4.7 started
Mar 23 15:20:04 skynet vdr: [4635] switched to user 'vdr'
Mar 23 15:20:04 skynet vdr: [4635] loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.4.5
Mar 23 15:20:04 skynet vdr: [4635] loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.4.5
Mar 23 15:20:04 skynet vdr: [4635] loading plugin: /usr/lib/vdr/plugins/libvdr-xineliboutput.so.1.4.5
Mar 23 15:20:04 skynet vdr: [4635] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Mar 23 15:20:04 skynet vdr: [4635] vdr: DVD drive not found: /var/cache/vdr/dvd
Mar 23 15:20:04 skynet vdr: [4635] loading /var/lib/vdr/setup.conf
Mar 23 15:20:04 skynet vdr: [4635] loading /var/lib/vdr/sources.conf
Mar 23 15:20:04 skynet vdr: [4635] loading /var/lib/vdr/diseqc.conf
Mar 23 15:20:04 skynet vdr: [4635] loading /var/lib/vdr/channels.conf
Mar 23 15:20:04 skynet vdr: [4635] loading /var/lib/vdr/timers.conf
Mar 23 15:20:04 skynet vdr: [4635] loading /var/lib/vdr/commands.conf
Mar 23 15:20:04 skynet vdr: [4635] loading /var/lib/vdr/reccmds.conf
Mar 23 15:20:04 skynet vdr: [4635] loading /var/lib/vdr/svdrphosts.conf
Mar 23 15:20:04 skynet kernel: [ 66.036000] Failure registering capabilities with primary security module.
Mar 23 15:20:04 skynet vdr: [4635] loading /var/lib/vdr/keymacros.conf
Mar 23 15:20:04 skynet vdr: [4635] found 1 video device
Mar 23 15:20:04 skynet vdr: [4635] initializing plugin: mplayer (0.9.15): Media replay via MPlayer
Mar 23 15:20:04 skynet vdr: [4635] loading /var/lib/vdr/plugins/mplayersources.conf
Mar 23 15:20:04 skynet vdr: [4635] initializing plugin: mp3 (0.9.15): A versatile audio player
Mar 23 15:20:04 skynet vdr: [4635] loading /var/lib/vdr/plugins/mp3sources.conf
Mar 23 15:20:04 skynet vdr: [4635] initializing plugin: xineliboutput (1.0.0rc2): X11/xine-lib output plugin
Mar 23 15:20:04 skynet vdr: [4635] initializing plugin: dvd (0.3.6-b03): turn VDR into an (almost) full featured DVD player
Mar 23 15:20:04 skynet vdr: [4635] setting primary device to 2
Mar 23 15:20:04 skynet vdr: [4635] SVDRP listening on port 2001
Mar 23 15:20:04 skynet vdr: [4635] setting current skin to "sttng"
Mar 23 15:20:04 skynet vdr: [4635] loading /var/lib/vdr/themes/sttng-default.theme
Mar 23 15:20:04 skynet vdr: [4635] starting plugin: mplayer
Mar 23 15:20:04 skynet vdr: [4635] starting plugin: mp3
Mar 23 15:20:04 skynet vdr: [4635] starting plugin: xineliboutput
Mar 23 15:20:04 skynet vdr: [4759] [xine..put] Listening on port 37890
Mar 23 15:20:04 skynet vdr: [4759] [xine..put] Listening for UDP broadcasts on port 37890
Mar 23 15:20:04 skynet dhcdbd: Started up.
Mar 23 15:20:04 skynet vdr: [4635] starting plugin: dvd
Mar 23 15:20:04 skynet vdr: [4635] switching to channel 1
Mar 23 15:20:07 skynet kernel: [ 69.320000] [drm] Initialized drm 1.1.0 20060810
Mar 23 15:20:07 skynet kernel: [ 69.332000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
Mar 23 15:20:07 skynet kernel: [ 69.332000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
Mar 23 15:20:07 skynet kernel: [ 69.340000] [drm] Initialized r128 2.5.0 20030725 on minor 0
Mar 23 15:20:07 skynet kernel: [ 69.340000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Mar 23 15:20:07 skynet kernel: [ 69.340000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
Mar 23 15:20:07 skynet kernel: [ 69.340000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
Mar 23 15:30:09 skynet vdr: [4635] cleaning up id3 cache
Mar 23 15:30:53 skynet kernel: [ 714.820000] eth0: link down
Mar 23 15:30:53 skynet kernel: [ 714.820000] ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 23 15:30:53 skynet kernel: [ 715.336000] eth0: link down
Mar 23 15:30:53 skynet kernel: [ 715.336000] ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 23 15:31:11 skynet kernel: [ 732.564000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mar 23 15:31:11 skynet kernel: [ 732.708000] eth0: link down
Mar 23 15:31:11 skynet kernel: [ 732.708000] ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 23 15:31:14 skynet kernel: [ 736.232000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mar 23 15:31:15 skynet kernel: [ 736.736000] wlan0: duplicate address detected!