rendered paste bodyThis file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --sysconfdir=/etc/powerdns --libdir=/usr/lib/powerdns --disable-recursor --with-modules= --with-dynmodules=pipe geo gpgsql --with-pgsql-includes=/usr/include --with-pgsql-lib=/usr/lib --with-mysql-lib=/usr/lib --with-sqlite-lib=/usr/lib --with-sqlite3-lib=/usr/lib --disable-static-binaries --build=i686-pc-linux-gnu
## --------- ##
## Platform. ##
## --------- ##
hostname = eris
uname -m = i686
uname -r = 2.6.23-hardened-r7
uname -s = Linux
uname -v = #1 SMP Tue Feb 19 04:41:47 UTC 2008
/usr/bin/uname -p = Intel(R) Xeon(TM) CPU 2.40GHz
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /sbin
PATH: /usr/sbin
PATH: /usr/lib/portage/bin
PATH: /usr/local/bin
PATH: /bin
PATH: /usr/bin
PATH: /opt/bin
PATH: /usr/i686-pc-linux-gnu/gcc-bin/3.4.6
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2027: checking for a BSD-compatible install
configure:2083: result: /usr/bin/install -c
configure:2094: checking whether build environment is sane
configure:2137: result: yes
configure:2165: checking for a thread-safe mkdir -p
configure:2204: result: /bin/mkdir -p
configure:2217: checking for gawk
configure:2233: found /bin/gawk
configure:2244: result: gawk
configure:2255: checking whether make sets $(MAKE)
configure:2276: result: yes
configure:2470: checking build system type
configure:2488: result: i686-pc-linux-gnu
configure:2510: checking host system type
configure:2525: result: i686-pc-linux-gnu
configure:2561: checking for style of include used by make
configure:2589: result: GNU
configure:2619: checking for i686-pc-linux-gnu-gcc
configure:2635: found /usr/bin/i686-pc-linux-gnu-gcc
configure:2646: result: i686-pc-linux-gnu-gcc
configure:2924: checking for C compiler version
configure:2931: i686-pc-linux-gnu-gcc --version >&5
i686-pc-linux-gnu-gcc (GCC) 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2934: $? = 0
configure:2941: i686-pc-linux-gnu-gcc -v >&5
Reading specs from /usr/lib/gcc/i686-pc-linux-gnu/3.4.6/specs
Configured with: /var/tmp/portage/sys-devel/gcc-3.4.6-r2/work/gcc-3.4.6/configure --prefix=/usr --bindir=/usr/i686-pc-linux-gnu/gcc-bin/3.4.6 --includedir=/usr/lib/gcc/i686-pc-linux-gnu/3.4.6/include --datadir=/usr/share/gcc-data/i686-pc-linux-gnu/3.4.6 --mandir=/usr/share/gcc-data/i686-pc-linux-gnu/3.4.6/man --infodir=/usr/share/gcc-data/i686-pc-linux-gnu/3.4.6/info --with-gxx-include-dir=/usr/lib/gcc/i686-pc-linux-gnu/3.4.6/include/g++-v3 --host=i686-pc-linux-gnu --build=i686-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --enable-secureplt --disable-libunwind-exceptions --disable-multilib --disable-libgcj --with-arch=i686 --enable-languages=c,c++,treelang --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu
Thread model: posix
gcc version 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10)
configure:2944: $? = 0
configure:2951: i686-pc-linux-gnu-gcc -V >&5
i686-pc-linux-gnu-gcc: `-V' option must have argument
configure:2954: $? = 1
configure:2977: checking for C compiler default output file name
configure:3004: i686-pc-linux-gnu-gcc -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:3007: $? = 0
configure:3045: result: a.out
configure:3062: checking whether the C compiler works
configure:3072: ./a.out
configure:3075: $? = 0
configure:3092: result: yes
configure:3099: checking whether we are cross compiling
configure:3101: result: no
configure:3104: checking for suffix of executables
configure:3111: i686-pc-linux-gnu-gcc -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:3114: $? = 0
configure:3138: result:
configure:3144: checking for suffix of object files
configure:3170: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:3173: $? = 0
configure:3196: result: o
configure:3200: checking whether we are using the GNU C compiler
configure:3229: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:3235: $? = 0
configure:3252: result: yes
configure:3257: checking whether i686-pc-linux-gnu-gcc accepts -g
configure:3287: i686-pc-linux-gnu-gcc -c -g conftest.c >&5
configure:3293: $? = 0
configure:3392: result: yes
configure:3409: checking for i686-pc-linux-gnu-gcc option to accept ISO C89
configure:3483: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:3489: $? = 0
configure:3512: result: none needed
configure:3532: checking dependency style of i686-pc-linux-gnu-gcc
configure:3623: result: gcc3
configure:3644: checking how to run the C preprocessor
configure:3684: i686-pc-linux-gnu-gcc -E conftest.c
configure:3690: $? = 0
configure:3721: i686-pc-linux-gnu-gcc -E conftest.c
conftest.c:10:28: ac_nonexistent.h: No such file or directory
configure:3727: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pdns"
| #define VERSION "2.9.21"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3760: result: i686-pc-linux-gnu-gcc -E
configure:3789: i686-pc-linux-gnu-gcc -E conftest.c
configure:3795: $? = 0
configure:3826: i686-pc-linux-gnu-gcc -E conftest.c
conftest.c:10:28: ac_nonexistent.h: No such file or directory
configure:3832: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pdns"
| #define VERSION "2.9.21"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3870: checking for grep that handles long lines and -e
configure:3944: result: /bin/grep
configure:3949: checking for egrep
configure:4027: result: /bin/grep -E
configure:4032: checking for ANSI C header files
configure:4062: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:4068: $? = 0
configure:4167: i686-pc-linux-gnu-gcc -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:4170: $? = 0
configure:4176: ./conftest
configure:4179: $? = 0
configure:4196: result: yes
configure:4220: checking for sys/types.h
configure:4241: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:4247: $? = 0
configure:4263: result: yes
configure:4220: checking for sys/stat.h
configure:4241: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:4247: $? = 0
configure:4263: result: yes
configure:4220: checking for stdlib.h
configure:4241: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:4247: $? = 0
configure:4263: result: yes
configure:4220: checking for string.h
configure:4241: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:4247: $? = 0
configure:4263: result: yes
configure:4220: checking for memory.h
configure:4241: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:4247: $? = 0
configure:4263: result: yes
configure:4220: checking for strings.h
configure:4241: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:4247: $? = 0
configure:4263: result: yes
configure:4220: checking for inttypes.h
configure:4241: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:4247: $? = 0
configure:4263: result: yes
configure:4220: checking for stdint.h
configure:4241: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:4247: $? = 0
configure:4263: result: yes
configure:4220: checking for unistd.h
configure:4241: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:4247: $? = 0
configure:4263: result: yes
configure:4275: checking whether byte ordering is bigendian
configure:4308: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:4314: $? = 0
configure:4346: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
conftest.c: In function `main':
conftest.c:27: error: `not' undeclared (first use in this function)
conftest.c:27: error: (Each undeclared identifier is reported only once
conftest.c:27: error: for each function it appears in.)
conftest.c:27: error: syntax error before "big"
configure:4352: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pdns"
| #define VERSION "2.9.21"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h. */
| #include <sys/types.h>
| #include <sys/param.h>
|
| int
| main ()
| {
| #if BYTE_ORDER != BIG_ENDIAN
| not big endian
| #endif
|
| ;
| return 0;
| }
configure:4492: result: no
configure:4523: checking for i686-pc-linux-gnu-gcc
configure:4550: result: i686-pc-linux-gnu-gcc
configure:4828: checking for C compiler version
configure:4835: i686-pc-linux-gnu-gcc --version >&5
i686-pc-linux-gnu-gcc (GCC) 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:4838: $? = 0
configure:4845: i686-pc-linux-gnu-gcc -v >&5
Reading specs from /usr/lib/gcc/i686-pc-linux-gnu/3.4.6/specs
Configured with: /var/tmp/portage/sys-devel/gcc-3.4.6-r2/work/gcc-3.4.6/configure --prefix=/usr --bindir=/usr/i686-pc-linux-gnu/gcc-bin/3.4.6 --includedir=/usr/lib/gcc/i686-pc-linux-gnu/3.4.6/include --datadir=/usr/share/gcc-data/i686-pc-linux-gnu/3.4.6 --mandir=/usr/share/gcc-data/i686-pc-linux-gnu/3.4.6/man --infodir=/usr/share/gcc-data/i686-pc-linux-gnu/3.4.6/info --with-gxx-include-dir=/usr/lib/gcc/i686-pc-linux-gnu/3.4.6/include/g++-v3 --host=i686-pc-linux-gnu --build=i686-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --enable-secureplt --disable-libunwind-exceptions --disable-multilib --disable-libgcj --with-arch=i686 --enable-languages=c,c++,treelang --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu
Thread model: posix
gcc version 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10)
configure:4848: $? = 0
configure:4855: i686-pc-linux-gnu-gcc -V >&5
i686-pc-linux-gnu-gcc: `-V' option must have argument
configure:4858: $? = 1
configure:4861: checking whether we are using the GNU C compiler
configure:4913: result: yes
configure:4918: checking whether i686-pc-linux-gnu-gcc accepts -g
configure:5053: result: yes
configure:5070: checking for i686-pc-linux-gnu-gcc option to accept ISO C89
configure:5173: result: none needed
configure:5193: checking dependency style of i686-pc-linux-gnu-gcc
configure:5284: result: gcc3
configure:5313: checking for i686-pc-linux-gnu-g++
configure:5329: found /usr/bin/i686-pc-linux-gnu-g++
configure:5340: result: i686-pc-linux-gnu-g++
configure:5415: checking for C++ compiler version
configure:5422: i686-pc-linux-gnu-g++ --version >&5
i686-pc-linux-gnu-g++ (GCC) 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:5425: $? = 0
configure:5432: i686-pc-linux-gnu-g++ -v >&5
Reading specs from /usr/lib/gcc/i686-pc-linux-gnu/3.4.6/specs
Configured with: /var/tmp/portage/sys-devel/gcc-3.4.6-r2/work/gcc-3.4.6/configure --prefix=/usr --bindir=/usr/i686-pc-linux-gnu/gcc-bin/3.4.6 --includedir=/usr/lib/gcc/i686-pc-linux-gnu/3.4.6/include --datadir=/usr/share/gcc-data/i686-pc-linux-gnu/3.4.6 --mandir=/usr/share/gcc-data/i686-pc-linux-gnu/3.4.6/man --infodir=/usr/share/gcc-data/i686-pc-linux-gnu/3.4.6/info --with-gxx-include-dir=/usr/lib/gcc/i686-pc-linux-gnu/3.4.6/include/g++-v3 --host=i686-pc-linux-gnu --build=i686-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --enable-secureplt --disable-libunwind-exceptions --disable-multilib --disable-libgcj --with-arch=i686 --enable-languages=c,c++,treelang --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu
Thread model: posix
gcc version 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10)
configure:5435: $? = 0
configure:5442: i686-pc-linux-gnu-g++ -V >&5
i686-pc-linux-gnu-g++: `-V' option must have argument
configure:5445: $? = 1
configure:5448: checking whether we are using the GNU C++ compiler
configure:5477: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:5483: $? = 0
configure:5500: result: yes
configure:5505: checking whether i686-pc-linux-gnu-g++ accepts -g
configure:5535: i686-pc-linux-gnu-g++ -c -g conftest.cpp >&5
configure:5541: $? = 0
configure:5640: result: yes
configure:5665: checking dependency style of i686-pc-linux-gnu-g++
configure:5756: result: gcc3
configure:5775: checking for bison
configure:5791: found /usr/bin/bison
configure:5802: result: bison -y
configure:5818: checking for flex
configure:5834: found /usr/bin/flex
configure:5845: result: flex
configure:5882: flex conftest.l
configure:5885: $? = 0
configure:5887: checking lex output file root
configure:5903: result: lex.yy
configure:5908: checking lex library
configure:5927: i686-pc-linux-gnu-gcc -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
/var/tmp/portage/net-dns/pdns-2.9.21/temp/ccGovCQW.o: In function `input':
conftest.c:(.text+0x11ab): undefined reference to `yywrap'
/var/tmp/portage/net-dns/pdns-2.9.21/temp/ccGovCQW.o: In function `.L225':
conftest.c:(.text+0x1593): undefined reference to `yywrap'
/var/tmp/portage/net-dns/pdns-2.9.21/temp/ccGovCQW.o: In function `main':
conftest.c:(.text+0x1d8a): undefined reference to `yywrap'
collect2: ld returned 1 exit status
configure:5933: $? = 1
configure: failed program was:
|
| #line 3 "lex.yy.c"
|
| #define YY_INT_ALIGNED short int
|
| /* A lexical scanner generated by flex */
|
| #define FLEX_SCANNER
| #define YY_FLEX_MAJOR_VERSION 2
| #define YY_FLEX_MINOR_VERSION 5
| #define YY_FLEX_SUBMINOR_VERSION 33
| #if YY_FLEX_SUBMINOR_VERSION > 0
| #define FLEX_BETA
| #endif
|
| /* First, we deal with platform-specific or compiler-specific issues. */
|
| /* begin standard C headers. */
| #include <stdio.h>
| #include <string.h>
| #include <errno.h>
| #include <stdlib.h>
|
| /* end standard C headers. */
|
| /* flex integer type definitions */
|
| #ifndef FLEXINT_H
| #define FLEXINT_H
|
| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
|
| #if __STDC_VERSION__ >= 199901L
|
| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
| * if you want the limit (max/min) macros for int types.
| */
| #ifndef __STDC_LIMIT_MACROS
| #define __STDC_LIMIT_MACROS 1
| #endif
|
| #include <inttypes.h>
| typedef int8_t flex_int8_t;
| typedef uint8_t flex_uint8_t;
| typedef int16_t flex_int16_t;
| typedef uint16_t flex_uint16_t;
| typedef int32_t flex_int32_t;
| typedef uint32_t flex_uint32_t;
| #else
| typedef signed char flex_int8_t;
| typedef short int flex_int16_t;
| typedef int flex_int32_t;
| typedef unsigned char flex_uint8_t;
| typedef unsigned short int flex_uint16_t;
| typedef unsigned int flex_uint32_t;
| #endif /* ! C99 */
|
| /* Limits of integral types. */
| #ifndef INT8_MIN
| #define INT8_MIN (-128)
| #endif
| #ifndef INT16_MIN
| #define INT16_MIN (-32767-1)
| #endif
| #ifndef INT32_MIN
| #define INT32_MIN (-2147483647-1)
| #endif
| #ifndef INT8_MAX
| #define INT8_MAX (127)
| #endif
| #ifndef INT16_MAX
| #define INT16_MAX (32767)
| #endif
| #ifndef INT32_MAX
| #define INT32_MAX (2147483647)
| #endif
| #ifndef UINT8_MAX
| #define UINT8_MAX (255U)
| #endif
| #ifndef UINT16_MAX
| #define UINT16_MAX (65535U)
| #endif
| #ifndef UINT32_MAX
| #define UINT32_MAX (4294967295U)
| #endif
|
| #endif /* ! FLEXINT_H */
|
| #ifdef __cplusplus
|
| /* The "const" storage-class-modifier is valid. */
| #define YY_USE_CONST
|
| #else /* ! __cplusplus */
|
| #if __STDC__
|
| #define YY_USE_CONST
|
| #endif /* __STDC__ */
| #endif /* ! __cplusplus */
|
| #ifdef YY_USE_CONST
| #define yyconst const
| #else
| #define yyconst
| #endif
|
| /* Returned upon end-of-file. */
| #define YY_NULL 0
|
| /* Promotes a possibly negative, possibly signed char to an unsigned
| * integer for use as an array index. If the signed char is negative,
| * we want to instead treat it as an 8-bit unsigned char, hence the
| * double cast.
| */
| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
|
| /* Enter a start condition. This macro really ought to take a parameter,
| * but we do it the disgusting crufty way forced on us by the ()-less
| * definition of BEGIN.
| */
| #define BEGIN (yy_start) = 1 + 2 *
|
| /* Translate the current start state into a value that can be later handed
| * to BEGIN to return to the state. The YYSTATE alias is for lex
| * compatibility.
| */
| #define YY_START (((yy_start) - 1) / 2)
| #define YYSTATE YY_START
|
| /* Action number for EOF rule of a given start state. */
| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
|
| /* Special action meaning "start processing a new file". */
| #define YY_NEW_FILE yyrestart(yyin )
|
| #define YY_END_OF_BUFFER_CHAR 0
|
| /* Size of default input buffer. */
| #ifndef YY_BUF_SIZE
| #define YY_BUF_SIZE 16384
| #endif
|
| /* The state buf must be large enough to hold one state per character in the main buffer.
| */
| #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
|
| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
| #define YY_TYPEDEF_YY_BUFFER_STATE
| typedef struct yy_buffer_state *YY_BUFFER_STATE;
| #endif
|
| extern int yyleng;
|
| extern FILE *yyin, *yyout;
|
| #define EOB_ACT_CONTINUE_SCAN 0
| #define EOB_ACT_END_OF_FILE 1
| #define EOB_ACT_LAST_MATCH 2
|
| #define YY_LESS_LINENO(n)
|
| /* Return all but the first "n" matched characters back to the input stream. */
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| *yy_cp = (yy_hold_char); \
| YY_RESTORE_YY_MORE_OFFSET \
| (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
| } \
| while ( 0 )
|
| #define unput(c) yyunput( c, (yytext_ptr) )
|
| /* The following is because we cannot portably get our hands on size_t
| * (without autoconf's help, which isn't available because we want
| * flex-generated scanners to compile on their own).
| */
|
| #ifndef YY_TYPEDEF_YY_SIZE_T
| #define YY_TYPEDEF_YY_SIZE_T
| typedef unsigned int yy_size_t;
| #endif
|
| #ifndef YY_STRUCT_YY_BUFFER_STATE
| #define YY_STRUCT_YY_BUFFER_STATE
| struct yy_buffer_state
| {
| FILE *yy_input_file;
|
| char *yy_ch_buf; /* input buffer */
| char *yy_buf_pos; /* current position in input buffer */
|
| /* Size of input buffer in bytes, not including room for EOB
| * characters.
| */
| yy_size_t yy_buf_size;
|
| /* Number of characters read into yy_ch_buf, not including EOB
| * characters.
| */
| int yy_n_chars;
|
| /* Whether we "own" the buffer - i.e., we know we created it,
| * and can realloc() it to grow it, and should free() it to
| * delete it.
| */
| int yy_is_our_buffer;
|
| /* Whether this is an "interactive" input source; if so, and
| * if we're using stdio for input, then we want to use getc()
| * instead of fread(), to make sure we stop fetching input after
| * each newline.
| */
| int yy_is_interactive;
|
| /* Whether we're considered to be at the beginning of a line.
| * If so, '^' rules will be active on the next match, otherwise
| * not.
| */
| int yy_at_bol;
|
| int yy_bs_lineno; /**< The line count. */
| int yy_bs_column; /**< The column count. */
|
| /* Whether to try to fill the input buffer when we reach the
| * end of it.
| */
| int yy_fill_buffer;
|
| int yy_buffer_status;
|
| #define YY_BUFFER_NEW 0
| #define YY_BUFFER_NORMAL 1
| /* When an EOF's been seen but there's still some text to process
| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
| * shouldn't try reading from the input source any more. We might
| * still have a bunch of tokens to match, though, because of
| * possible backing-up.
| *
| * When we actually see the EOF, we change the status to "new"
| * (via yyrestart()), so that the user can continue scanning by
| * just pointing yyin at a new input file.
| */
| #define YY_BUFFER_EOF_PENDING 2
|
| };
| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
|
| /* Stack of input buffers. */
| static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
| static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
| static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
|
| /* We provide macros for accessing buffer states in case in the
| * future we want to put the buffer states in a more general
| * "scanner state".
| *
| * Returns the top of the stack, or NULL.
| */
| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
| ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
| : NULL)
|
| /* Same as previous macro, but useful when we know that the buffer stack is not
| * NULL or when we need an lvalue. For internal use only.
| */
| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
|
| /* yy_hold_char holds the character lost when yytext is formed. */
| static char yy_hold_char;
| static int yy_n_chars; /* number of characters read into yy_ch_buf */
| int yyleng;
|
| /* Points to current character in buffer. */
| static char *yy_c_buf_p = (char *) 0;
| static int yy_init = 0; /* whether we need to initialize */
| static int yy_start = 0; /* start state number */
|
| /* Flag which is used to allow yywrap()'s to do buffer switches
| * instead of setting up a fresh yyin. A bit of a hack ...
| */
| static int yy_did_buffer_switch_on_eof;
|
| void yyrestart (FILE *input_file );
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
| YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
| void yy_delete_buffer (YY_BUFFER_STATE b );
| void yy_flush_buffer (YY_BUFFER_STATE b );
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
| void yypop_buffer_state (void );
|
| static void yyensure_buffer_stack (void );
| static void yy_load_buffer_state (void );
| static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
|
| #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
|
| YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
| YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
| YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
|
| void *yyalloc (yy_size_t );
| void *yyrealloc (void *,yy_size_t );
| void yyfree (void * );
|
| #define yy_new_buffer yy_create_buffer
|
| #define yy_set_interactive(is_interactive) \
| { \
| if ( ! YY_CURRENT_BUFFER ){ \
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer(yyin,YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
| }
|
| #define yy_set_bol(at_bol) \
| { \
| if ( ! YY_CURRENT_BUFFER ){\
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer(yyin,YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
| }
|
| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
|
| /* Begin user sect3 */
|
| typedef unsigned char YY_CHAR;
|
| FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
|
| typedef int yy_state_type;
|
| extern int yylineno;
|
| int yylineno = 1;
|
| extern char *yytext;
| #define yytext_ptr yytext
|
| static yy_state_type yy_get_previous_state (void );
| static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
| static int yy_get_next_buffer (void );
| static void yy_fatal_error (yyconst char msg[] );
|
| /* Done after the current pattern has been matched and before the
| * corresponding action - sets up yytext.
| */
| #define YY_DO_BEFORE_ACTION \
| (yytext_ptr) = yy_bp; \
| (yytext_ptr) -= (yy_more_len); \
| yyleng = (size_t) (yy_cp - (yytext_ptr)); \
| (yy_hold_char) = *yy_cp; \
| *yy_cp = '\0'; \
| (yy_c_buf_p) = yy_cp;
|
| #define YY_NUM_RULES 8
| #define YY_END_OF_BUFFER 9
| /* This struct is not used in this scanner,
| but its presence is necessary. */
| struct yy_trans_info
| {
| flex_int32_t yy_verify;
| flex_int32_t yy_nxt;
| };
| static yyconst flex_int16_t yy_acclist[23] =
| { 0,
| 9, 7, 8, 8, 1, 7, 8, 2, 7, 8,
| 3, 7, 8, 4, 7, 8, 5, 7, 8, 6,
| 7, 8
| } ;
|
| static yyconst flex_int16_t yy_accept[14] =
| { 0,
| 1, 1, 1, 2, 4, 5, 8, 11, 14, 17,
| 20, 23, 23
| } ;
|
| static yyconst flex_int32_t yy_ec[256] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 3, 4, 5, 6,
|
| 7, 8, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1
| } ;
|
| static yyconst flex_int32_t yy_meta[9] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1
| } ;
|
| static yyconst flex_int16_t yy_base[13] =
| { 0,
| 0, 0, 9, 10, 10, 10, 10, 10, 10, 10,
| 10, 10
| } ;
|
| static yyconst flex_int16_t yy_def[13] =
| { 0,
| 12, 1, 12, 12, 12, 12, 12, 12, 12, 12,
| 12, 0
| } ;
|
| static yyconst flex_int16_t yy_nxt[19] =
| { 0,
| 4, 5, 6, 7, 8, 9, 10, 11, 12, 3,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| static yyconst flex_int16_t yy_chk[19] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 3, 12,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| extern int yy_flex_debug;
| int yy_flex_debug = 0;
|
| static yy_state_type *yy_state_buf=0, *yy_state_ptr=0;
| static char *yy_full_match;
| static int yy_lp;
| #define REJECT \
| { \
| *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \
| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
| ++(yy_lp); \
| goto find_rule; \
| }
|
| static int yy_more_flag = 0;
| static int yy_more_len = 0;
| #define yymore() ((yy_more_flag) = 1)
| #define YY_MORE_ADJ (yy_more_len)
| #define YY_RESTORE_YY_MORE_OFFSET
| char *yytext;
| #line 1 "conftest.l"
| #line 472 "lex.yy.c"
|
| #define INITIAL 0
|
| #ifndef YY_NO_UNISTD_H
| /* Special case for "unistd.h", since it is non-ANSI. We include it way
| * down here because we want the user's section 1 to have been scanned first.
| * The user has a chance to override it with an option.
| */
| #include <unistd.h>
| #endif
|
| #ifndef YY_EXTRA_TYPE
| #define YY_EXTRA_TYPE void *
| #endif
|
| static int yy_init_globals (void );
|
| /* Macros after this point can all be overridden by user definitions in
| * section 1.
| */
|
| #ifndef YY_SKIP_YYWRAP
| #ifdef __cplusplus
| extern "C" int yywrap (void );
| #else
| extern int yywrap (void );
| #endif
| #endif
|
| static void yyunput (int c,char *buf_ptr );
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char *,yyconst char *,int );
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * );
| #endif
|
| #ifndef YY_NO_INPUT
|
| #ifdef __cplusplus
| static int yyinput (void );
| #else
| static int input (void );
| #endif
|
| #endif
|
| /* Amount of stuff to slurp up with each read. */
| #ifndef YY_READ_BUF_SIZE
| #define YY_READ_BUF_SIZE 8192
| #endif
|
| /* Copy whatever the last rule matched to the standard output. */
| #ifndef ECHO
| /* This used to be an fputs(), but since the string might contain NUL's,
| * we now use fwrite().
| */
| #define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
| #endif
|
| /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
| * is returned in "result".
| */
| #ifndef YY_INPUT
| #define YY_INPUT(buf,result,max_size) \
| if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
| { \
| int c = '*'; \
| size_t n; \
| for ( n = 0; n < max_size && \
| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
| buf[n] = (char) c; \
| if ( c == '\n' ) \
| buf[n++] = (char) c; \
| if ( c == EOF && ferror( yyin ) ) \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| result = n; \
| } \
| else \
| { \
| errno=0; \
| while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
| { \
| if( errno != EINTR) \
| { \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| break; \
| } \
| errno=0; \
| clearerr(yyin); \
| } \
| }\
| \
|
| #endif
|
| /* No semi-colon after return; correct usage is to write "yyterminate();" -
| * we don't want an extra ';' after the "return" because that will cause
| * some compilers to complain about unreachable statements.
| */
| #ifndef yyterminate
| #define yyterminate() return YY_NULL
| #endif
|
| /* Number of entries by which start-condition stack grows. */
| #ifndef YY_START_STACK_INCR
| #define YY_START_STACK_INCR 25
| #endif
|
| /* Report a fatal error. */
| #ifndef YY_FATAL_ERROR
| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
| #endif
|
| /* end tables serialization structures and prototypes */
|
| /* Default declaration of generated scanner - a define so the user can
| * easily add parameters.
| */
| #ifndef YY_DECL
| #define YY_DECL_IS_OURS 1
|
| extern int yylex (void);
|
| #define YY_DECL int yylex (void)
| #endif /* !YY_DECL */
|
| /* Code executed at the beginning of each rule, after yytext and yyleng
| * have been set up.
| */
| #ifndef YY_USER_ACTION
| #define YY_USER_ACTION
| #endif
|
| /* Code executed at the end of each rule. */
| #ifndef YY_BREAK
| #define YY_BREAK break;
| #endif
|
| #define YY_RULE_SETUP \
| YY_USER_ACTION
|
| /** The main scanner function which does all the work.
| */
| YY_DECL
| {
| register yy_state_type yy_current_state;
| register char *yy_cp, *yy_bp;
| register int yy_act;
|
| #line 1 "conftest.l"
|
| #line 627 "lex.yy.c"
|
| if ( !(yy_init) )
| {
| (yy_init) = 1;
|
| #ifdef YY_USER_INIT
| YY_USER_INIT;
| #endif
|
| /* Create the reject buffer large enough to save one state per allowed character. */
| if ( ! (yy_state_buf) )
| (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE );
|
| if ( ! (yy_start) )
| (yy_start) = 1; /* first start state */
|
| if ( ! yyin )
| yyin = stdin;
|
| if ( ! yyout )
| yyout = stdout;
|
| if ( ! YY_CURRENT_BUFFER ) {
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer(yyin,YY_BUF_SIZE );
| }
|
| yy_load_buffer_state( );
| }
|
| while ( 1 ) /* loops until end-of-file is reached */
| {
| (yy_more_len) = 0;
| if ( (yy_more_flag) )
| {
| (yy_more_len) = (yy_c_buf_p) - (yytext_ptr);
| (yy_more_flag) = 0;
| }
| yy_cp = (yy_c_buf_p);
|
| /* Support of yytext. */
| *yy_cp = (yy_hold_char);
|
| /* yy_bp points to the position in yy_ch_buf of the start of
| * the current run.
| */
| yy_bp = yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| yy_match:
| do
| {
| register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| ++yy_cp;
| }
| while ( yy_base[yy_current_state] != 10 );
|
| yy_find_action:
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| find_rule: /* we branch to this label when backing up */
| for ( ; ; ) /* until we find what rule we matched */
| {
| if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
| {
| yy_act = yy_acclist[(yy_lp)];
| {
| (yy_full_match) = yy_cp;
| break;
| }
| }
| --yy_cp;
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| }
|
| YY_DO_BEFORE_ACTION;
|
| do_action: /* This label is used only to access EOF actions. */
|
| switch ( yy_act )
| { /* beginning of action switch */
| case 1:
| YY_RULE_SETUP
| #line 2 "conftest.l"
| { ECHO; }
| YY_BREAK
| case 2:
| YY_RULE_SETUP
| #line 3 "conftest.l"
| { REJECT; }
| YY_BREAK
| case 3:
| YY_RULE_SETUP
| #line 4 "conftest.l"
| { yymore (); }
| YY_BREAK
| case 4:
| YY_RULE_SETUP
| #line 5 "conftest.l"
| { yyless (1); }
| YY_BREAK
| case 5:
| YY_RULE_SETUP
| #line 6 "conftest.l"
| { yyless (input () != 0); }
| YY_BREAK
| case 6:
| YY_RULE_SETUP
| #line 7 "conftest.l"
| { unput (yytext[0]); }
| YY_BREAK
| case 7:
| YY_RULE_SETUP
| #line 8 "conftest.l"
| { BEGIN INITIAL; }
| YY_BREAK
| case 8:
| YY_RULE_SETUP
| #line 9 "conftest.l"
| ECHO;
| YY_BREAK
| #line 763 "lex.yy.c"
| case YY_STATE_EOF(INITIAL):
| yyterminate();
|
| case YY_END_OF_BUFFER:
| {
| /* Amount of text matched not including the EOB char. */
| int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
|
| /* Undo the effects of YY_DO_BEFORE_ACTION. */
| *yy_cp = (yy_hold_char);
| YY_RESTORE_YY_MORE_OFFSET
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
| {
| /* We're scanning a new file or input source. It's
| * possible that this happened because the user
| * just pointed yyin at a new source and called
| * yylex(). If so, then we have to assure
| * consistency between YY_CURRENT_BUFFER and our
| * globals. Here is the right place to do so, because
| * this is the first action (other than possibly a
| * back-up) that will match for the new input source.
| */
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
| }
|
| /* Note that here we test for yy_c_buf_p "<=" to the position
| * of the first EOB in the buffer, since yy_c_buf_p will
| * already have been incremented past the NUL character
| * (since all states make transitions on EOB to the
| * end-of-buffer state). Contrast this with the test
| * in input().
| */
| if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| { /* This was really a NUL. */
| yy_state_type yy_next_state;
|
| (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| /* Okay, we're now positioned to make the NUL
| * transition. We couldn't have
| * yy_get_previous_state() go ahead and do it
| * for us because it doesn't know how to deal
| * with the possibility of jamming (and we don't
| * want to build jamming into it because then it
| * will run more slowly).
| */
|
| yy_next_state = yy_try_NUL_trans( yy_current_state );
|
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
|
| if ( yy_next_state )
| {
| /* Consume the NUL. */
| yy_cp = ++(yy_c_buf_p);
| yy_current_state = yy_next_state;
| goto yy_match;
| }
|
| else
| {
| yy_cp = (yy_c_buf_p);
| goto yy_find_action;
| }
| }
|
| else switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_END_OF_FILE:
| {
| (yy_did_buffer_switch_on_eof) = 0;
|
| if ( yywrap( ) )
| {
| /* Note: because we've taken care in
| * yy_get_next_buffer() to have set up
| * yytext, we can now set up
| * yy_c_buf_p so that if some total
| * hoser (like flex itself) wants to
| * call the scanner after we return the
| * YY_NULL, it'll still work - another
| * YY_NULL will get returned.
| */
| (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
|
| yy_act = YY_STATE_EOF(YY_START);
| goto do_action;
| }
|
| else
| {
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| }
| break;
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) =
| (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_match;
|
| case EOB_ACT_LAST_MATCH:
| (yy_c_buf_p) =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_find_action;
| }
| break;
| }
|
| default:
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--no action found" );
| } /* end of action switch */
| } /* end of scanning one token */
| } /* end of yylex */
|
| /* yy_get_next_buffer - try to read in a new buffer
| *
| * Returns a code representing an action:
| * EOB_ACT_LAST_MATCH -
| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
| * EOB_ACT_END_OF_FILE - end of file
| */
| static int yy_get_next_buffer (void)
| {
| register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
| register char *source = (yytext_ptr);
| register int number_to_move, i;
| int ret_val;
|
| if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--end of buffer missed" );
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
| { /* Don't try to fill the buffer, so this is an EOF. */
| if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
| {
| /* We matched a single character, the EOB, so
| * treat this as a final EOF.
| */
| return EOB_ACT_END_OF_FILE;
| }
|
| else
| {
| /* We matched some text prior to the EOB, first
| * process it.
| */
| return EOB_ACT_LAST_MATCH;
| }
| }
|
| /* Try to read more data. */
|
| /* First move last chars to start of buffer. */
| number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
|
| for ( i = 0; i < number_to_move; ++i )
| *(dest++) = *(source++);
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
| /* don't do the read, it's not guaranteed to return an EOF,
| * just force an EOF
| */
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
|
| else
| {
| int num_to_read =
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
|
| while ( num_to_read <= 0 )
| { /* Not enough room in the buffer - grow it. */
|
| YY_FATAL_ERROR(
| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
|
| }
|
| if ( num_to_read > YY_READ_BUF_SIZE )
| num_to_read = YY_READ_BUF_SIZE;
|
| /* Read in more data. */
| YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
| (yy_n_chars), num_to_read );
|
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| if ( (yy_n_chars) == 0 )
| {
| if ( number_to_move == YY_MORE_ADJ )
| {
| ret_val = EOB_ACT_END_OF_FILE;
| yyrestart(yyin );
| }
|
| else
| {
| ret_val = EOB_ACT_LAST_MATCH;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
| YY_BUFFER_EOF_PENDING;
| }
| }
|
| else
| ret_val = EOB_ACT_CONTINUE_SCAN;
|
| (yy_n_chars) += number_to_move;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
|
| (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
|
| return ret_val;
| }
|
| /* yy_get_previous_state - get the state just before the EOB char was reached */
|
| static yy_state_type yy_get_previous_state (void)
| {
| register yy_state_type yy_current_state;
| register char *yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
| {
| register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| }
|
| return yy_current_state;
| }
|
| /* yy_try_NUL_trans - try to make a transition on the NUL character
| *
| * synopsis
| * next_state = yy_try_NUL_trans( current_state );
| */
| static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
| {
| register int yy_is_jam;
|
| register YY_CHAR yy_c = 1;
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| yy_is_jam = (yy_current_state == 12);
| if ( ! yy_is_jam )
| *(yy_state_ptr)++ = yy_current_state;
|
| return yy_is_jam ? 0 : yy_current_state;
| }
|
| static void yyunput (int c, register char * yy_bp )
| {
| register char *yy_cp;
|
| yy_cp = (yy_c_buf_p);
|
| /* undo effects of setting up yytext */
| *yy_cp = (yy_hold_char);
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| { /* need to shift things up to make room */
| /* +2 for EOB chars. */
| register int number_to_move = (yy_n_chars) + 2;
| register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
| register char *source =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
|
| while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| *--dest = *--source;
|
| yy_cp += (int) (dest - source);
| yy_bp += (int) (dest - source);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| YY_FATAL_ERROR( "flex scanner push-back overflow" );
| }
|
| *--yy_cp = (char) c;
|
| (yytext_ptr) = yy_bp;
| (yy_hold_char) = *yy_cp;
| (yy_c_buf_p) = yy_cp;
| }
|
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
| static int yyinput (void)
| #else
| static int input (void)
| #endif
|
| {
| int c;
|
| *(yy_c_buf_p) = (yy_hold_char);
|
| if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
| {
| /* yy_c_buf_p now points to the character we want to return.
| * If this occurs *before* the EOB characters, then it's a
| * valid NUL; if not, then we've hit the end of the buffer.
| */
| if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| /* This was really a NUL. */
| *(yy_c_buf_p) = '\0';
|
| else
| { /* need more input */
| int offset = (yy_c_buf_p) - (yytext_ptr);
| ++(yy_c_buf_p);
|
| switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_LAST_MATCH:
| /* This happens because yy_g_n_b()
| * sees that we've accumulated a
| * token and flags that we need to
| * try matching the token before
| * proceeding. But for input(),
| * there's no matching to consider.
| * So convert the EOB_ACT_LAST_MATCH
| * to EOB_ACT_END_OF_FILE.
| */
|
| /* Reset buffer status. */
| yyrestart(yyin );
|
| /*FALLTHROUGH*/
|
| case EOB_ACT_END_OF_FILE:
| {
| if ( yywrap( ) )
| return EOF;
|
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| #ifdef __cplusplus
| return yyinput();
| #else
| return input();
| #endif
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) = (yytext_ptr) + offset;
| break;
| }
| }
| }
|
| c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
| *(yy_c_buf_p) = '\0'; /* preserve yytext */
| (yy_hold_char) = *++(yy_c_buf_p);
|
| return c;
| }
| #endif /* ifndef YY_NO_INPUT */
|
| /** Immediately switch to a different input stream.
| * @param input_file A readable stream.
| *
| * @note This function does not reset the start condition to @c INITIAL .
| */
| void yyrestart (FILE * input_file )
| {
|
| if ( ! YY_CURRENT_BUFFER ){
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer(yyin,YY_BUF_SIZE );
| }
|
| yy_init_buffer(YY_CURRENT_BUFFER,input_file );
| yy_load_buffer_state( );
| }
|
| /** Switch to a different input buffer.
| * @param new_buffer The new input buffer.
| *
| */
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
| {
|
| /* TODO. We should be able to replace this entire function body
| * with
| * yypop_buffer_state();
| * yypush_buffer_state(new_buffer);
| */
| yyensure_buffer_stack ();
| if ( YY_CURRENT_BUFFER == new_buffer )
| return;
|
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
| yy_load_buffer_state( );
|
| /* We don't actually know whether we did this switch during
| * EOF (yywrap()) processing, but the only time this flag
| * is looked at is after yywrap() is called, so it's safe
| * to go ahead and always set it.
| */
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| static void yy_load_buffer_state (void)
| {
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
| yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
| (yy_hold_char) = *(yy_c_buf_p);
| }
|
| /** Allocate and initialize an input buffer state.
| * @param file A readable stream.
| * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
| *
| * @return the allocated buffer state.
| */
| YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
| {
| YY_BUFFER_STATE b;
|
| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_buf_size = size;
|
| /* yy_ch_buf has to be 2 characters longer than the size given because
| * we need to put in 2 end-of-buffer characters.
| */
| b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
| if ( ! b->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_is_our_buffer = 1;
|
| yy_init_buffer(b,file );
|
| return b;
| }
|
| /** Destroy the buffer.
| * @param b a buffer created with yy_create_buffer()
| *
| */
| void yy_delete_buffer (YY_BUFFER_STATE b )
| {
|
| if ( ! b )
| return;
|
| if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
| YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
|
| if ( b->yy_is_our_buffer )
| yyfree((void *) b->yy_ch_buf );
|
| yyfree((void *) b );
| }
|
| #ifndef _UNISTD_H /* assume unistd.h has isatty() for us */
| #ifdef __cplusplus
| extern "C" {
| #endif
| #ifdef __THROW /* this is a gnuism */
| extern int isatty (int ) __THROW;
| #else
| extern int isatty (int );
| #endif
| #ifdef __cplusplus
| }
| #endif
| #endif
|
| /* Initializes or reinitializes a buffer.
| * This function is sometimes called more than once on the same buffer,
| * such as during a yyrestart() or at EOF.
| */
| static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
|
| {
| int oerrno = errno;
|
| yy_flush_buffer(b );
|
| b->yy_input_file = file;
| b->yy_fill_buffer = 1;
|
| /* If b is the current buffer, then yy_init_buffer was _probably_
| * called from yyrestart() or through yy_get_next_buffer.
| * In that case, we don't want to reset the lineno or column.
| */
| if (b != YY_CURRENT_BUFFER){
| b->yy_bs_lineno = 1;
| b->yy_bs_column = 0;
| }
|
| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
|
| errno = oerrno;
| }
|
| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
| * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
| *
| */
| void yy_flush_buffer (YY_BUFFER_STATE b )
| {
| if ( ! b )
| return;
|
| b->yy_n_chars = 0;
|
| /* We always need two end-of-buffer characters. The first causes
| * a transition to the end-of-buffer state. The second causes
| * a jam in that state.
| */
| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
|
| b->yy_buf_pos = &b->yy_ch_buf[0];
|
| b->yy_at_bol = 1;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| if ( b == YY_CURRENT_BUFFER )
| yy_load_buffer_state( );
| }
|
| /** Pushes the new state onto the stack. The new state becomes
| * the current state. This function will allocate the stack
| * if necessary.
| * @param new_buffer The new state.
| *
| */
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
| {
| if (new_buffer == NULL)
| return;
|
| yyensure_buffer_stack();
|
| /* This block is copied from yy_switch_to_buffer. */
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| /* Only push if top exists. Otherwise, replace top. */
| if (YY_CURRENT_BUFFER)
| (yy_buffer_stack_top)++;
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
|
| /* copied from yy_switch_to_buffer. */
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| /** Removes and deletes the top of the stack, if present.
| * The next element becomes the new top.
| *
| */
| void yypop_buffer_state (void)
| {
| if (!YY_CURRENT_BUFFER)
| return;
|
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| if ((yy_buffer_stack_top) > 0)
| --(yy_buffer_stack_top);
|
| if (YY_CURRENT_BUFFER) {
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
| }
|
| /* Allocates the stack if it does not exist.
| * Guarantees space for at least one push.
| */
| static void yyensure_buffer_stack (void)
| {
| int num_to_alloc;
|
| if (!(yy_buffer_stack)) {
|
| /* First allocation is just for 2 elements, since we don't know if this
| * scanner will even need a stack. We use 2 instead of 1 to avoid an
| * immediate realloc on the next call.
| */
| num_to_alloc = 1;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
| (num_to_alloc * sizeof(struct yy_buffer_state*)
| );
|
| memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
|
| (yy_buffer_stack_max) = num_to_alloc;
| (yy_buffer_stack_top) = 0;
| return;
| }
|
| if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
|
| /* Increase the buffer to prepare for a possible push. */
| int grow_size = 8 /* arbitrary grow size */;
|
| num_to_alloc = (yy_buffer_stack_max) + grow_size;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
| ((yy_buffer_stack),
| num_to_alloc * sizeof(struct yy_buffer_state*)
| );
|
| /* zero only the new slots.*/
| memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
| (yy_buffer_stack_max) = num_to_alloc;
| }
| }
|
| /** Setup the input buffer state to scan directly from a user-specified character buffer.
| * @param base the character buffer
| * @param size the size in bytes of the character buffer
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
| {
| YY_BUFFER_STATE b;
|
| if ( size < 2 ||
| base[size-2] != YY_END_OF_BUFFER_CHAR ||
| base[size-1] != YY_END_OF_BUFFER_CHAR )
| /* They forgot to leave room for the EOB's. */
| return 0;
|
| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
|
| b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
| b->yy_buf_pos = b->yy_ch_buf = base;
| b->yy_is_our_buffer = 0;
| b->yy_input_file = 0;
| b->yy_n_chars = b->yy_buf_size;
| b->yy_is_interactive = 0;
| b->yy_at_bol = 1;
| b->yy_fill_buffer = 0;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| yy_switch_to_buffer(b );
|
| return b;
| }
|
| /** Setup the input buffer state to scan a string. The next call to yylex() will
| * scan from a @e copy of @a str.
| * @param str a NUL-terminated string to scan
| *
| * @return the newly allocated buffer state object.
| * @note If you want to scan bytes that may contain NUL values, then use
| * yy_scan_bytes() instead.
| */
| YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
| {
|
| return yy_scan_bytes(yystr,strlen(yystr) );
| }
|
| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
| * scan from a @e copy of @a bytes.
| * @param bytes the byte buffer to scan
| * @param len the number of bytes in the buffer pointed to by @a bytes.
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len )
| {
| YY_BUFFER_STATE b;
| char *buf;
| yy_size_t n;
| int i;
|
| /* Get memory for full buffer, including space for trailing EOB's. */
| n = _yybytes_len + 2;
| buf = (char *) yyalloc(n );
| if ( ! buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
|
| for ( i = 0; i < _yybytes_len; ++i )
| buf[i] = yybytes[i];
|
| buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
|
| b = yy_scan_buffer(buf,n );
| if ( ! b )
| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
|
| /* It's okay to grow etc. this buffer, and we should throw it
| * away when we're done.
| */
| b->yy_is_our_buffer = 1;
|
| return b;
| }
|
| #ifndef YY_EXIT_FAILURE
| #define YY_EXIT_FAILURE 2
| #endif
|
| static void yy_fatal_error (yyconst char* msg )
| {
| (void) fprintf( stderr, "%s\n", msg );
| exit( YY_EXIT_FAILURE );
| }
|
| /* Redefine yyless() so it works in section 3 code. */
|
| #undef yyless
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| yytext[yyleng] = (yy_hold_char); \
| (yy_c_buf_p) = yytext + yyless_macro_arg; \
| (yy_hold_char) = *(yy_c_buf_p); \
| *(yy_c_buf_p) = '\0'; \
| yyleng = yyless_macro_arg; \
| } \
| while ( 0 )
|
| /* Accessor methods (get/set functions) to struct members. */
|
| /** Get the current line number.
| *
| */
| int yyget_lineno (void)
| {
|
| return yylineno;
| }
|
| /** Get the input stream.
| *
| */
| FILE *yyget_in (void)
| {
| return yyin;
| }
|
| /** Get the output stream.
| *
| */
| FILE *yyget_out (void)
| {
| return yyout;
| }
|
| /** Get the length of the current token.
| *
| */
| int yyget_leng (void)
| {
| return yyleng;
| }
|
| /** Get the current token.
| *
| */
|
| char *yyget_text (void)
| {
| return yytext;
| }
|
| /** Set the current line number.
| * @param line_number
| *
| */
| void yyset_lineno (int line_number )
| {
|
| yylineno = line_number;
| }
|
| /** Set the input stream. This does not discard the current
| * input buffer.
| * @param in_str A readable stream.
| *
| * @see yy_switch_to_buffer
| */
| void yyset_in (FILE * in_str )
| {
| yyin = in_str ;
| }
|
| void yyset_out (FILE * out_str )
| {
| yyout = out_str ;
| }
|
| int yyget_debug (void)
| {
| return yy_flex_debug;
| }
|
| void yyset_debug (int bdebug )
| {
| yy_flex_debug = bdebug ;
| }
|
| static int yy_init_globals (void)
| {
| /* Initialization is the same as for the non-reentrant scanner.
| * This function is called from yylex_destroy(), so don't allocate here.
| */
|
| (yy_buffer_stack) = 0;
| (yy_buffer_stack_top) = 0;
| (yy_buffer_stack_max) = 0;
| (yy_c_buf_p) = (char *) 0;
| (yy_init) = 0;
| (yy_start) = 0;
|
| (yy_state_buf) = 0;
| (yy_state_ptr) = 0;
| (yy_full_match) = 0;
| (yy_lp) = 0;
|
| /* Defined in main.c */
| #ifdef YY_STDINIT
| yyin = stdin;
| yyout = stdout;
| #else
| yyin = (FILE *) 0;
| yyout = (FILE *) 0;
| #endif
|
| /* For future reference: Set errno on error, since we are called by
| * yylex_init()
| */
| return 0;
| }
|
| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
| int yylex_destroy (void)
| {
|
| /* Pop the buffer stack, destroying each element. */
| while(YY_CURRENT_BUFFER){
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| yypop_buffer_state();
| }
|
| /* Destroy the stack itself. */
| yyfree((yy_buffer_stack) );
| (yy_buffer_stack) = NULL;
|
| yyfree ( (yy_state_buf) );
| (yy_state_buf) = NULL;
|
| /* Reset the globals. This is important in a non-reentrant scanner so the next time
| * yylex() is called, initialization will occur. */
| yy_init_globals( );
|
| return 0;
| }
|
| /*
| * Internal utility routines.
| */
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
| {
| register int i;
| for ( i = 0; i < n; ++i )
| s1[i] = s2[i];
| }
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * s )
| {
| register int n;
| for ( n = 0; s[n]; ++n )
| ;
|
| return n;
| }
| #endif
|
| void *yyalloc (yy_size_t size )
| {
| return (void *) malloc( size );
| }
|
| void *yyrealloc (void * ptr, yy_size_t size )
| {
| /* The cast to (char *) in the following accommodates both
| * implementations that use char* generic pointers, and those
| * that use void* generic pointers. It works with the latter
| * because both ANSI C and C++ allow castless assignment from
| * any pointer type to void*, and deal with argument conversions
| * as though doing an assignment.
| */
| return (void *) realloc( (char *) ptr, size );
| }
|
| void yyfree (void * ptr )
| {
| free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
| }
|
| #define YYTABLES_NAME "yytables"
|
| #line 9 "conftest.l"
|
|
| #ifdef YYTEXT_POINTER
| extern char *yytext;
| #endif
| int
| main (void)
| {
| return ! yylex () + ! yywrap ();
| }
configure:5927: i686-pc-linux-gnu-gcc -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c -lfl >&5
configure:5933: $? = 0
configure:5954: result: -lfl
configure:5960: checking whether yytext is a pointer
configure:5981: i686-pc-linux-gnu-gcc -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c -lfl >&5
configure:5987: $? = 0
configure:6006: result: yes
configure:6034: checking for a BSD-compatible install
configure:6090: result: /usr/bin/install -c
configure:6101: checking whether make sets $(MAKE)
configure:6122: result: yes
configure:6203: checking for a sed that does not truncate output
configure:6259: result: /bin/sed
configure:6273: checking for ld used by i686-pc-linux-gnu-gcc
configure:6340: result: /usr/i686-pc-linux-gnu/bin/ld
configure:6349: checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld
configure:6364: result: yes
configure:6369: checking for /usr/i686-pc-linux-gnu/bin/ld option to reload object files
configure:6376: result: -r
configure:6394: checking for BSD-compatible nm
configure:6443: result: /usr/bin/nm -B
configure:6447: checking whether ln -s works
configure:6451: result: yes
configure:6458: checking how to recognize dependent libraries
configure:6644: result: pass_all
configure:6898: checking dlfcn.h usability
configure:6915: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:6921: $? = 0
configure:6935: result: yes
configure:6939: checking dlfcn.h presence
configure:6954: i686-pc-linux-gnu-gcc -E conftest.c
configure:6960: $? = 0
configure:6974: result: yes
configure:7002: checking for dlfcn.h
configure:7010: result: yes
configure:7033: checking how to run the C++ preprocessor
configure:7069: i686-pc-linux-gnu-g++ -E conftest.cpp
configure:7075: $? = 0
configure:7106: i686-pc-linux-gnu-g++ -E conftest.cpp
conftest.cpp:22:28: ac_nonexistent.h: No such file or directory
configure:7112: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pdns"
| #define VERSION "2.9.21"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:7145: result: i686-pc-linux-gnu-g++ -E
configure:7174: i686-pc-linux-gnu-g++ -E conftest.cpp
configure:7180: $? = 0
configure:7211: i686-pc-linux-gnu-g++ -E conftest.cpp
conftest.cpp:22:28: ac_nonexistent.h: No such file or directory
configure:7217: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pdns"
| #define VERSION "2.9.21"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:7266: checking for i686-pc-linux-gnu-g77
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-xlf
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-f77
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-frt
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-pgf77
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-cf77
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-fort77
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-fl32
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-af77
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-xlf90
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-f90
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-pgf90
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-pghpf
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-epcf90
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-gfortran
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-g95
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-xlf95
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-f95
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-fort
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-ifort
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-ifc
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-efc
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-pgf95
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-lf95
configure:7296: result: no
configure:7266: checking for i686-pc-linux-gnu-ftn
configure:7296: result: no
configure:7310: checking for g77
configure:7340: result: no
configure:7310: checking for xlf
configure:7340: result: no
configure:7310: checking for f77
configure:7340: result: no
configure:7310: checking for frt
configure:7340: result: no
configure:7310: checking for pgf77
configure:7340: result: no
configure:7310: checking for cf77
configure:7340: result: no
configure:7310: checking for fort77
configure:7340: result: no
configure:7310: checking for fl32
configure:7340: result: no
configure:7310: checking for af77
configure:7340: result: no
configure:7310: checking for xlf90
configure:7340: result: no
configure:7310: checking for f90
configure:7340: result: no
configure:7310: checking for pgf90
configure:7340: result: no
configure:7310: checking for pghpf
configure:7340: result: no
configure:7310: checking for epcf90
configure:7340: result: no
configure:7310: checking for gfortran
configure:7340: result: no
configure:7310: checking for g95
configure:7340: result: no
configure:7310: checking for xlf95
configure:7340: result: no
configure:7310: checking for f95
configure:7340: result: no
configure:7310: checking for fort
configure:7340: result: no
configure:7310: checking for ifort
configure:7340: result: no
configure:7310: checking for ifc
configure:7340: result: no
configure:7310: checking for efc
configure:7340: result: no
configure:7310: checking for pgf95
configure:7340: result: no
configure:7310: checking for lf95
configure:7340: result: no
configure:7310: checking for ftn
configure:7340: result: no
configure:7367: checking for Fortran 77 compiler version
configure:7374: --version >&5
./configure: line 7375: --version: command not found
configure:7377: $? = 127
configure:7384: -v >&5
./configure: line 7385: -v: command not found
configure:7387: $? = 127
configure:7394: -V >&5
./configure: line 7395: -V: command not found
configure:7397: $? = 127
configure:7405: checking whether we are using the GNU Fortran 77 compiler
configure:7424: -c conftest.F >&5
./configure: line 7425: -c: command not found
configure:7430: $? = 127
configure: failed program was:
| program main
| #ifndef __GNUC__
| choke me
| #endif
|
| end
configure:7447: result: no
configure:7453: checking whether accepts -g
configure:7470: -c -g conftest.f >&5
./configure: line 7471: -c: command not found
configure:7476: $? = 127
configure: failed program was:
| program main
|
| end
configure:7492: result: no
configure:7521: checking the maximum length of command line arguments
configure:7633: result: 98304
configure:7645: checking command to parse /usr/bin/nm -B output from i686-pc-linux-gnu-gcc object
configure:7750: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:7753: $? = 0
configure:7757: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm
configure:7760: $? = 0
configure:7812: i686-pc-linux-gnu-gcc -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c conftstm.o >&5
configure:7815: $? = 0
configure:7853: result: ok
configure:7857: checking for objdir
configure:7872: result: .libs
configure:7924: checking for i686-pc-linux-gnu-ar
configure:7940: found /usr/bin/i686-pc-linux-gnu-ar
configure:7951: result: i686-pc-linux-gnu-ar
configure:8020: checking for i686-pc-linux-gnu-ranlib
configure:8036: found /usr/bin/i686-pc-linux-gnu-ranlib
configure:8047: result: i686-pc-linux-gnu-ranlib
configure:8116: checking for i686-pc-linux-gnu-strip
configure:8132: found /usr/bin/i686-pc-linux-gnu-strip
configure:8143: result: i686-pc-linux-gnu-strip
configure:8732: checking for correct ltmain.sh version
configure:8782: result: yes
configure:8842: checking if i686-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions
configure:8860: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
configure:8864: $? = 0
configure:8877: result: no
configure:8892: checking for i686-pc-linux-gnu-gcc option to produce PIC
configure:9124: result: -fPIC
configure:9132: checking if i686-pc-linux-gnu-gcc PIC flag -fPIC works
configure:9150: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -fPIC -DPIC conftest.c >&5
configure:9154: $? = 0
configure:9167: result: yes
configure:9195: checking if i686-pc-linux-gnu-gcc static flag -static works
configure:9223: result: yes
configure:9233: checking if i686-pc-linux-gnu-gcc supports -c -o file.o
configure:9254: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -o out/conftest2.o conftest.c >&5
configure:9258: $? = 0
configure:9280: result: yes
configure:9306: checking whether the i686-pc-linux-gnu-gcc linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries
configure:10286: result: yes
configure:10307: checking whether -lc should be explicitly linked in
configure:10312: i686-pc-linux-gnu-gcc -c -march=pentium4 -O2 -pipe -fomit-frame-pointer conftest.c >&5
configure:10315: $? = 0
configure:10330: i686-pc-linux-gnu-gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep -lc \>/dev/null 2\>\&1
configure:10333: $? = 0
configure:10345: result: no
configure:10353: checking dynamic linker characteristics
configure:10968: result: GNU/Linux ld.so
configure:10992: checking how to hardcode library paths into programs
configure:11017: result: immediate
configure:11031: checking whether stripping libraries is possible
configure:11036: result: yes
configure:11838: checking if libtool supports shared libraries
configure:11840: result: yes
configure:11843: checking whether to build shared libraries
configure:11864: result: yes
configure:11867: checking whether to build static libraries
configure:11871: result: yes
configure:11965: creating libtool
configure:12558: checking for ld used by i686-pc-linux-gnu-g++
configure:12625: result: /usr/i686-pc-linux-gnu/bin/ld
configure:12634: checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld
configure:12649: result: yes
configure:12700: checking whether the i686-pc-linux-gnu-g++ linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries
configure:13646: result: yes
configure:13663: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:13666: $? = 0
configure:13822: checking for i686-pc-linux-gnu-g++ option to produce PIC
configure:14106: result: -fPIC
configure:14114: checking if i686-pc-linux-gnu-g++ PIC flag -fPIC works
configure:14132: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 -fPIC -DPIC conftest.cpp >&5
configure:14136: $? = 0
configure:14149: result: yes
configure:14177: checking if i686-pc-linux-gnu-g++ static flag -static works
configure:14205: result: yes
configure:14215: checking if i686-pc-linux-gnu-g++ supports -c -o file.o
configure:14236: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 -o out/conftest2.o conftest.cpp >&5
configure:14240: $? = 0
configure:14262: result: yes
configure:14288: checking whether the i686-pc-linux-gnu-g++ linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries
configure:14314: result: yes
configure:14381: checking dynamic linker characteristics
configure:14944: result: GNU/Linux ld.so
configure:14968: checking how to hardcode library paths into programs
configure:14993: result: immediate
configure:21248: checking for ANSI C header files
configure:21412: result: yes
configure:21443: checking fcntl.h usability
configure:21460: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:21466: $? = 0
configure:21480: result: yes
configure:21484: checking fcntl.h presence
configure:21499: i686-pc-linux-gnu-g++ -E conftest.cpp
configure:21505: $? = 0
configure:21519: result: yes
configure:21547: checking for fcntl.h
configure:21555: result: yes
configure:21443: checking getopt.h usability
configure:21460: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:21466: $? = 0
configure:21480: result: yes
configure:21484: checking getopt.h presence
configure:21499: i686-pc-linux-gnu-g++ -E conftest.cpp
configure:21505: $? = 0
configure:21519: result: yes
configure:21547: checking for getopt.h
configure:21555: result: yes
configure:21443: checking limits.h usability
configure:21460: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:21466: $? = 0
configure:21480: result: yes
configure:21484: checking limits.h presence
configure:21499: i686-pc-linux-gnu-g++ -E conftest.cpp
configure:21505: $? = 0
configure:21519: result: yes
configure:21547: checking for limits.h
configure:21555: result: yes
configure:21433: checking for strings.h
configure:21439: result: yes
configure:21443: checking sys/time.h usability
configure:21460: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:21466: $? = 0
configure:21480: result: yes
configure:21484: checking sys/time.h presence
configure:21499: i686-pc-linux-gnu-g++ -E conftest.cpp
configure:21505: $? = 0
configure:21519: result: yes
configure:21547: checking for sys/time.h
configure:21555: result: yes
configure:21443: checking syslog.h usability
configure:21460: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:21466: $? = 0
configure:21480: result: yes
configure:21484: checking syslog.h presence
configure:21499: i686-pc-linux-gnu-g++ -E conftest.cpp
configure:21505: $? = 0
configure:21519: result: yes
configure:21547: checking for syslog.h
configure:21555: result: yes
configure:21433: checking for unistd.h
configure:21439: result: yes
configure:21583: checking boost/shared_ptr.hpp usability
configure:21600: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:21606: $? = 0
configure:21620: result: yes
configure:21624: checking boost/shared_ptr.hpp presence
configure:21639: i686-pc-linux-gnu-g++ -E conftest.cpp
configure:21645: $? = 0
configure:21659: result: yes
configure:21687: checking for boost/shared_ptr.hpp
configure:21695: result: yes
configure:21711: checking for size_t
configure:21741: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:21747: $? = 0
configure:21762: result: yes
configure:21774: checking whether time.h and sys/time.h may both be included
configure:21804: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:21810: $? = 0
configure:21825: result: yes
configure:21835: checking whether struct tm is in sys/time.h or time.h
configure:21865: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:21871: $? = 0
configure:21886: result: time.h
configure:21897: checking return type of signal handlers
configure:21925: i686-pc-linux-gnu-g++ -c -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
conftest.cpp: In function `int main()':
conftest.cpp:38: error: void value not ignored as it ought to be
configure:21931: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "pdns"
| #define VERSION "2.9.21"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define YYTEXT_POINTER 1
| #define HAVE_DLFCN_H 1
| #define STDC_HEADERS 1
| #define HAVE_FCNTL_H 1
| #define HAVE_GETOPT_H 1
| #define HAVE_LIMITS_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_SYS_TIME_H 1
| #define HAVE_SYSLOG_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_BOOST_SHARED_PTR_HPP 1
| #define TIME_WITH_SYS_TIME 1
| /* end confdefs.h. */
| #include <sys/types.h>
| #include <signal.h>
|
| int
| main ()
| {
| return *(signal (0, 0)) (0) == 1;
| ;
| return 0;
| }
configure:21946: result: void
configure:21964: checking for gethostname
configure:22020: i686-pc-linux-gnu-g++ -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:22026: $? = 0
configure:22044: result: yes
configure:21964: checking for gettimeofday
configure:22020: i686-pc-linux-gnu-g++ -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:22026: $? = 0
configure:22044: result: yes
configure:21964: checking for mkdir
configure:22020: i686-pc-linux-gnu-g++ -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:22026: $? = 0
configure:22044: result: yes
configure:21964: checking for mktime
configure:22020: i686-pc-linux-gnu-g++ -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:22026: $? = 0
configure:22044: result: yes
configure:21964: checking for select
configure:22020: i686-pc-linux-gnu-g++ -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:22026: $? = 0
configure:22044: result: yes
configure:21964: checking for socket
configure:22020: i686-pc-linux-gnu-g++ -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:22026: $? = 0
configure:22044: result: yes
configure:21964: checking for strerror
configure:22020: i686-pc-linux-gnu-g++ -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp >&5
configure:22026: $? = 0
configure:22044: result: yes
configure:22062: checking for dlopen in -ldl
configure:22097: i686-pc-linux-gnu-g++ -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp -ldl >&5
configure:22103: $? = 0
configure:22121: result: yes
configure:22136: checking for RTLD_NOW
configure:22161: i686-pc-linux-gnu-g++ -o conftest -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2 conftest.cpp -lz -ldl >&5
configure:22167: $? = 0
configure:22183: result: yes
configure:22279: checking whether we will be doing verbose logging
configure:22295: result: no
configure:22298: checking whether we should build static binaries
configure:22314: result: false
configure:22370: checking whether we will be building the server
configure:22380: result: yes
configure:22400: checking whether we will be building the recursor
configure:22410: result: no
configure:22423: checking whether we should use nedmalloc allocator
configure:22438: result: no
configure:22586: checking for PgSQL library directory
configure:22598: error: Didn't find the pgsql library dir in '/usr/lib/lib/pgsql /usr/lib/pgsql /usr/lib'
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=i686-pc-linux-gnu
ac_cv_c_bigendian=no
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=yes
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=pentium4 -O2 -pipe -fomit-frame-pointer'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=set
ac_cv_env_CXXFLAGS_value='-march=pentium4 -O2 -pipe -fomit-frame-pointer'
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_F77_set=
ac_cv_env_F77_value=
ac_cv_env_FFLAGS_set=
ac_cv_env_FFLAGS_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=i686-pc-linux-gnu
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=i686-pc-linux-gnu
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_f77_compiler_gnu=no
ac_cv_func_gethostname=yes
ac_cv_func_gettimeofday=yes
ac_cv_func_mkdir=yes
ac_cv_func_mktime=yes
ac_cv_func_select=yes
ac_cv_func_socket=yes
ac_cv_func_strerror=yes
ac_cv_header_boost_shared_ptr_hpp=yes
ac_cv_header_dlfcn_h=yes
ac_cv_header_fcntl_h=yes
ac_cv_header_getopt_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_limits_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_time_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_syslog_h=yes
ac_cv_header_time=yes
ac_cv_header_unistd_h=yes
ac_cv_host=i686-pc-linux-gnu
ac_cv_lib_dl_dlopen=yes
ac_cv_lib_lex=-lfl
ac_cv_objext=o
ac_cv_path_EGREP='/bin/grep -E'
ac_cv_path_GREP=/bin/grep
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AR=i686-pc-linux-gnu-ar
ac_cv_prog_AWK=gawk
ac_cv_prog_CC=i686-pc-linux-gnu-gcc
ac_cv_prog_CPP='i686-pc-linux-gnu-gcc -E'
ac_cv_prog_CXX=i686-pc-linux-gnu-g++
ac_cv_prog_CXXCPP='i686-pc-linux-gnu-g++ -E'
ac_cv_prog_LEX=flex
ac_cv_prog_RANLIB=i686-pc-linux-gnu-ranlib
ac_cv_prog_STRIP=i686-pc-linux-gnu-strip
ac_cv_prog_YACC='bison -y'
ac_cv_prog_cc_c89=
ac_cv_prog_cc_g=yes
ac_cv_prog_cxx_g=yes
ac_cv_prog_f77_g=no
ac_cv_prog_lex_root=lex.yy
ac_cv_prog_lex_yytext_pointer=yes
ac_cv_prog_make_make_set=yes
ac_cv_struct_tm=time.h
ac_cv_type_signal=void
ac_cv_type_size_t=yes
am_cv_CC_dependencies_compiler_type=gcc3
am_cv_CXX_dependencies_compiler_type=gcc3
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_ld_reload_flag=-r
lt_cv_objdir=.libs
lt_cv_path_LD=/usr/i686-pc-linux-gnu/bin/ld
lt_cv_path_LDCXX=/usr/i686-pc-linux-gnu/bin/ld
lt_cv_path_NM='/usr/bin/nm -B'
lt_cv_path_SED=/bin/sed
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_c_o_CXX=yes
lt_cv_prog_compiler_pic_works=yes
lt_cv_prog_compiler_pic_works_CXX=yes
lt_cv_prog_compiler_rtti_exceptions=no
lt_cv_prog_compiler_static_works=yes
lt_cv_prog_compiler_static_works_CXX=yes
lt_cv_prog_gnu_ld=yes
lt_cv_prog_gnu_ldcxx=yes
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern int \1;/p'\'''
lt_cv_sys_lib_dlsearch_path_spec='/lib /usr/lib /usr/local/lib /usr/i686-pc-linux-gnu/lib /usr/lib/gcc/i686-pc-linux-gnu/3.4.6 /usr/lib/libstdc++-v3/ '
lt_cv_sys_lib_search_path_spec='/usr/lib/gcc/i686-pc-linux-gnu/3.4.6 /usr/i686-pc-linux-gnu/lib /usr/lib /lib'
lt_cv_sys_max_cmd_len=98304
lt_lt_cv_prog_compiler_c_o='"yes"'
lt_lt_cv_prog_compiler_c_o_CXX='"yes"'
lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[ ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ ][ ]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p'\''"'
lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'\''"'
lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .* \\(.*\\)\$/extern int \\1;/p'\''"'
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /var/tmp/portage/net-dns/pdns-2.9.21/work/pdns-2.9.21/missing --run aclocal-1.10'
ALLSTATIC_FALSE=''
ALLSTATIC_TRUE='#'
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /var/tmp/portage/net-dns/pdns-2.9.21/work/pdns-2.9.21/missing --run tar'
AR='i686-pc-linux-gnu-ar'
AUTOCONF='${SHELL} /var/tmp/portage/net-dns/pdns-2.9.21/work/pdns-2.9.21/missing --run autoconf'
AUTOHEADER='${SHELL} /var/tmp/portage/net-dns/pdns-2.9.21/work/pdns-2.9.21/missing --run autoheader'
AUTOMAKE='${SHELL} /var/tmp/portage/net-dns/pdns-2.9.21/work/pdns-2.9.21/missing --run automake-1.10'
AWK='gawk'
CC='i686-pc-linux-gnu-gcc'
CCDEPMODE='depmode=gcc3'
CFLAGS='-march=pentium4 -O2 -pipe -fomit-frame-pointer'
CPP='i686-pc-linux-gnu-gcc -E'
CPPFLAGS=''
CXX='i686-pc-linux-gnu-g++'
CXXCPP='i686-pc-linux-gnu-g++ -E'
CXXDEPMODE='depmode=gcc3'
CXXFLAGS='-D_GNU_SOURCE -march=pentium4 -O2 -pipe -fomit-frame-pointer -Wall -O2'
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DSYMUTIL=''
DYNLINKFLAGS='-rdynamic'
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/bin/grep -E'
EXEEXT=''
F77=''
FFLAGS=''
GREP='/bin/grep'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LDFLAGS=''
LEX='flex'
LEXLIB='-lfl'
LEX_OUTPUT_ROOT='lex.yy'
LIBDL='-ldl '
LIBOBJS=''
LIBS=' -lz'
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
LN_S='ln -s'
LTLIBOBJS=''
MAKEINFO='${SHELL} /var/tmp/portage/net-dns/pdns-2.9.21/work/pdns-2.9.21/missing --run makeinfo'
MYSQL_incdir=''
MYSQL_lib=''
NEDMALLOC_FALSE=''
NEDMALLOC_TRUE='#'
NMEDIT=''
OBJEXT='o'
PACKAGE='pdns'
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PGSQL_incdir=''
PGSQL_lib=''
RANLIB='i686-pc-linux-gnu-ranlib'
RECURSOR_FALSE=''
RECURSOR_TRUE='#'
SED='/bin/sed'
SET_MAKE=''
SHELL='/bin/sh'
SQLITE3_incdir=''
SQLITE3_lib=''
SQLITE_incdir=''
SQLITE_lib=''
STRIP='i686-pc-linux-gnu-strip'
THREADFLAGS='-pthread'
VERSION='2.9.21'
YACC='bison -y'
YFLAGS=''
ac_ct_CC=''
ac_ct_CXX=''
ac_ct_F77=''
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE='#'
am__fastdepCXX_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build='i686-pc-linux-gnu'
build_alias='i686-pc-linux-gnu'
build_cpu='i686'
build_os='linux-gnu'
build_vendor='pc'
datadir='/usr/share'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='NONE'
host='i686-pc-linux-gnu'
host_alias='i686-pc-linux-gnu'
host_cpu='i686'
host_os='linux-gnu'
host_vendor='pc'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='/usr/share/info'
install_sh='$(SHELL) /var/tmp/portage/net-dns/pdns-2.9.21/work/pdns-2.9.21/install-sh'
libdir='/usr/lib/powerdns'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='/var/lib'
mandir='/usr/share/man'
mkdir_p='/bin/mkdir -p'
moduledirs=''
modulelibs=''
moduleobjects=''
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
programdescend='pdns'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
socketdir='/var/run'
sysconfdir='/etc/powerdns'
target_alias=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
#define PACKAGE "pdns"
#define VERSION "2.9.21"
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define YYTEXT_POINTER 1
#define HAVE_DLFCN_H 1
#define STDC_HEADERS 1
#define HAVE_FCNTL_H 1
#define HAVE_GETOPT_H 1
#define HAVE_LIMITS_H 1
#define HAVE_STRINGS_H 1
#define HAVE_SYS_TIME_H 1
#define HAVE_SYSLOG_H 1
#define HAVE_UNISTD_H 1
#define HAVE_BOOST_SHARED_PTR_HPP 1
#define TIME_WITH_SYS_TIME 1
#define RETSIGTYPE void
#define HAVE_GETHOSTNAME 1
#define HAVE_GETTIMEOFDAY 1
#define HAVE_MKDIR 1
#define HAVE_MKTIME 1
#define HAVE_SELECT 1
#define HAVE_SOCKET 1
#define HAVE_STRERROR 1
#define HAVE_LIBDL 1
#define HAVE_IPV6 1
configure: exit 1