rendered paste body#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Fri Mar 21 17:44:54 EDT 2008
#
# Note: This file was generated automatically
# by /usr/sbin/wancfg program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 2
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 24
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
_____________________________
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec 6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
# by /usr/local/sbin/setup-sangoma program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe2 = WAN_AFT_TE1, Comment
[interfaces]
w2g1 = wanpipe2, , TDM_VOICE, Comment
[wanpipe2]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 2
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 2
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 2
TDMV_DCHAN = 24
TDMV_HW_DTMF = NO
[w2g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
_________________________
[root@pbx asterisk]# cat /etc/zaptel.conf
# Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit
# Zaptel Channels Configurations (zaptel.conf)
#
loadzone=us
defaultzone=us
#Sangoma A102 port 1 [slot:4 bus:2 span:1] <wanpipe1>
span=1,0,0,esf,b8zs
bchan=1-23
#hardhdlc=24
dchan=24
#Sangoma A102 port 2 [slot:4 bus:2 span:2] <wanpipe2>
span=2,0,0,esf,b8zs
bchan=25-47
hardhdlc=48
#dchan=48
______________________________________________
[root@pbx asterisk]# cat /etc/asterisk/zapata.conf
;autogenerated by /usr/local/sbin/config-zaptel do not hand edit
;Zaptel Channels Configurations (zapata.conf)
;
;For detailed zapata options, view /etc/asterisk/zapata.conf.orig
[trunkgroups]
[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
;Sangoma A102 port 1 [slot:4 bus:2 span:1] <wanpipe1>
switchtype=ni1
context=from-pstn
group=0
signalling=pri_cpe
channel =>1-24
;Sangoma A102 port 2 [slot:4 bus:2 span:2] <wanpipe2>
switchtype=ni1
context=from-pstn
group=0
signalling=pri_cpe
channel =>25-47
____________________________
[root@pbx asterisk]# wanrouter status
Devices currently active:
wanpipe1 wanpipe2
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate |
wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 169 | 4 | 1 | EXT | 0 |
wanpipe2 | N/A | A101/1D/A102/2D/4/4D/8| 169 | 4 | 1 | EXT | 0 |
Wanrouter Status:
Device name | Protocol | Station | Status |
wanpipe1 | AFT HDLC | N/A | Connected |
wanpipe2 | AFT HDLC | N/A | Connected |
________________________________________________
[root@pbx asterisk]# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 23529283 0 0 0 IO-APIC-edge timer
1: 33 0 456 0 IO-APIC-edge i8042
8: 0 0 0 0 IO-APIC-edge rtc
9: 0 0 0 0 IO-APIC-level acpi
12: 105 0 687 0 IO-APIC-edge i8042
14: 204 0 210077 0 IO-APIC-edge ide0
90: 0 0 0 0 IO-APIC-level uhci_hcd:usb1
98: 0 0 0 0 IO-APIC-level uhci_hcd:usb2
106: 0 0 0 0 IO-APIC-level uhci_hcd:usb3
114: 0 0 0 0 IO-APIC-level ehci_hcd:usb4
122: 68 0 9000 4231 PCI-MSI-X eth1-Q0
130: 22 0 48 20 PCI-MSI-X eth1
146: 91 0 6600 2635 PCI-MSI-X eth2-Q0
154: 22 0 32 56 PCI-MSI-X eth2
169: 100591 0 10202572 13225704 IO-APIC-level wanpipe1, wanpipe2
170: 168 0 5208 17303 IO-APIC-level eth3
177: 10516 0 24433 0 IO-APIC-level aacraid
NMI: 446 187 946 1220
LOC: 23525448 23525403 23525322 23525250
ERR: 0
MIS: 0