rendered paste bodyolli@lappari:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fffec00 (ACPI data)
[ 0.000000] BIOS-e820: 000000000fffec00 - 0000000010000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65520) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65520
[ 0.000000] HighMem 65520 -> 65520
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65520
[ 0.000000] On node 0 totalpages: 65520
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 479 pages used for memmap
[ 0.000000] Normal zone: 60945 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7160 checksum 0
[ 0.000000] ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 0FFF4D07, 002C (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 0FFFEB65, 0074 (r1 IBM TP-T21 6040000 0)
[ 0.000000] ACPI: DSDT 0FFF4D33, 9E32 (r1 IBM TP-T21 6040000 MSFT 100000C)
[ 0.000000] ACPI: FACS 0FFFF000, 0040
[ 0.000000] ACPI: BOOT 0FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff80000)
[ 0.000000] Built 1 zonelists. Total pages: 65009
[ 0.000000] Kernel command line: root=UUID=619843cf-8c62-403a-9617-ff85e2ab77fb ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0120c000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 796.579 MHz processor.
[ 5.968232] Console: colour VGA+ 80x25
[ 5.968647] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 5.969122] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 5.996472] Memory: 248076k/262080k available (2015k kernel code, 13484k reserved, 916k data, 364k init, 0k highmem)
[ 5.996500] virtual kernel memory layout:
[ 5.996503] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 5.996507] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 5.996510] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 5.996514] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 5.996518] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 5.996521] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 5.996525] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 5.996534] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 5.996628] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 6.076628] Calibrating delay using timer specific routine.. 1594.37 BogoMIPS (lpj=3188755)
[ 6.076694] Security Framework v1.0.0 initialized
[ 6.076714] SELinux: Disabled at boot.
[ 6.076752] Mount-cache hash table entries: 512
[ 6.077048] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.077075] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 6.077082] CPU: L2 cache: 256K
[ 6.077090] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 6.077116] Compat vDSO mapped to ffffe000.
[ 6.077150] Checking 'hlt' instruction... OK.
[ 6.092848] SMP alternatives: switching to UP code
[ 6.093228] Freeing SMP alternatives: 11k freed
[ 6.093916] Early unpacking initramfs... done
[ 6.959253] ACPI: Core revision 20070126
[ 6.959767] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 6.968842] ACPI: setting ELCR to 0200 (from 0800)
[ 7.066079] CPU0: Intel Pentium III (Coppermine) stepping 06
[ 7.066095] SMP motherboard not detected.
[ 7.066101] Local APIC not detected. Using dummy APIC emulation.
[ 7.066207] Brought up 1 CPUs
[ 7.066507] Booting paravirtualized kernel on bare hardware
[ 7.066642] Time: 20:53:55 Date: 02/21/108
[ 7.066714] NET: Registered protocol family 16
[ 7.066991] EISA bus registered
[ 7.067017] ACPI: bus type pci registered
[ 7.067501] PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
[ 7.067507] PCI: Using configuration type 1
[ 7.067512] Setting up standard PCI resources
[ 7.073446] ACPI: EC: Look up EC in DSDT
[ 7.310413] ACPI: EC: GPE=0x09, ports=0x66, 0x62
[ 7.458366] ACPI: Interpreter enabled
[ 7.458378] ACPI: (supports S0 S1 S3 S4 S5)
[ 7.458426] ACPI: Using PIC for interrupt routing
[ 7.681669] ACPI: EC: GPE=0x09, ports=0x66, 0x62
[ 7.681802] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 7.681819] PCI: Probing PCI hardware (bus 00)
[ 7.682412] PCI quirk: region 1000-103f claimed by PIIX4 ACPI
[ 7.682421] PCI quirk: region 1040-104f claimed by PIIX4 SMB
[ 7.682432] PIIX4 devres C PIO at 15e8-15ef
[ 7.682439] PIIX4 devres I PIO at 03f0-03f7
[ 7.682445] PIIX4 devres J PIO at 002e-002f
[ 7.682856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 7.683015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 7.694777] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 7.695256] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 7.695729] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 7.696243] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 7.696690] ACPI: Power Resource [PSER] (on)
[ 7.696808] ACPI: Power Resource [PSIO] (on)
[ 7.696839] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 7.696871] pnp: PnP ACPI init
[ 7.696913] ACPI: bus type pnp registered
[ 7.809338] pnp: PnP ACPI: found 15 devices
[ 7.809348] ACPI: ACPI bus type pnp unregistered
[ 7.809358] PnPBIOS: Disabled by ACPI PNP
[ 7.809512] PCI: Using ACPI for IRQ routing
[ 7.809520] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 7.815589] NET: Registered protocol family 8
[ 7.815596] NET: Registered protocol family 20
[ 7.815815] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 7.815825] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 7.815833] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 7.815841] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 7.815868] pnp: 00:02: ioport range 0x1000-0x103f has been reserved
[ 7.815876] pnp: 00:02: ioport range 0x1040-0x104f has been reserved
[ 7.815884] pnp: 00:02: ioport range 0xfe00-0xfe0f has been reserved
[ 7.815908] pnp: 00:09: ioport range 0x15e0-0x15ef has been reserved
[ 7.815965] Time: tsc clocksource has been installed.
[ 7.846779] PCI: Bridge: 0000:00:01.0
[ 7.846786] IO window: disabled.
[ 7.846795] MEM window: f0000000-f7ffffff
[ 7.846803] PREFETCH window: 30000000-300fffff
[ 7.846812] PCI: Bus 2, cardbus bridge: 0000:00:02.0
[ 7.846818] IO window: 00001400-000014ff
[ 7.846825] IO window: 00001800-000018ff
[ 7.846833] PREFETCH window: 20000000-23ffffff
[ 7.846841] MEM window: 24000000-27ffffff
[ 7.846849] PCI: Bus 6, cardbus bridge: 0000:00:02.1
[ 7.846854] IO window: 00002400-000024ff
[ 7.846862] IO window: 00002800-000028ff
[ 7.846869] PREFETCH window: 28000000-2bffffff
[ 7.846877] MEM window: 2c000000-2fffffff
[ 7.847970] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 7.847979] PCI: setting IRQ 11 as level-triggered
[ 7.847986] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 7.848871] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 7.848878] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 7.848920] NET: Registered protocol family 2
[ 7.888067] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 7.888177] TCP established hash table entries: 8192 (order: 4, 98304 bytes)
[ 7.888445] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 7.888646] TCP: Hash tables configured (established 8192 bind 8192)
[ 7.888653] TCP reno registered
[ 7.900307] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[ 8.635098] it is
[ 9.543052] Freeing initrd memory: 7352k freed
[ 9.543444] Simple Boot Flag at 0x35 set to 0x1
[ 9.544010] audit: initializing netlink socket (disabled)
[ 9.544045] audit(1206132837.232:1): initialized
[ 9.550135] VFS: Disk quotas dquot_6.5.1
[ 9.550326] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 9.550616] io scheduler noop registered
[ 9.550624] io scheduler anticipatory registered
[ 9.550629] io scheduler deadline registered
[ 9.550689] io scheduler cfq registered (default)
[ 9.550717] Limiting direct PCI/PCI transfers.
[ 9.550766] Boot video device is 0000:01:00.0
[ 9.551224] isapnp: Scanning for PnP cards...
[ 9.903942] isapnp: No Plug & Play device found
[ 9.982476] Real Time Clock Driver v1.12ac
[ 9.982718] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 9.982863] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 9.984836] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 9.986780] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 9.987463] input: Macintosh mouse button emulation as /class/input/input0
[ 9.987701] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 10.003033] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 10.003048] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 10.003522] mice: PS/2 mouse device common for all mice
[ 10.003803] EISA: Probing bus 0 at eisa.0
[ 10.003822] Cannot allocate resource for EISA slot 1
[ 10.003829] Cannot allocate resource for EISA slot 2
[ 10.003855] EISA: Detected 0 cards.
[ 10.004100] TCP cubic registered
[ 10.004141] NET: Registered protocol family 1
[ 10.004208] Using IPI No-Shortcut mode
[ 10.004640] Magic number: 0:22:903
[ 10.006156] Freeing unused kernel memory: 364k freed
[ 10.019046] input: AT Translated Set 2 keyboard as /class/input/input1
[ 11.531282] AppArmor: AppArmor initialized<5>audit(1206132839.232:2): type=1505 info="AppArmor initialized" pid=1122
[ 11.549225] fuse init (API version 7.8)
[ 11.566131] Failure registering capabilities with primary security module.
[ 11.602000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 11.602015] ACPI: Processor [CPU] (supports 8 throttling states)
[ 11.606146] ACPI: Thermal Zone [THM0] (60 C)
[ 13.148210] PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
[ 13.149220] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 13.149230] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 13.149248] 3c59x: Donald Becker and others.
[ 13.149261] 0000:00:03.0: 3Com PCI 3c556B Laptop Hurricane at d081e000.
[ 13.149275] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 13.333943] SCSI subsystem initialized
[ 13.357551] libata version 2.21 loaded.
[ 13.373205] ata_piix 0000:00:07.1: version 2.11
[ 13.373612] scsi0 : ata_piix
[ 13.373731] scsi1 : ata_piix
[ 13.440507] usbcore: registered new interface driver usbfs
[ 13.440569] usbcore: registered new interface driver hub
[ 13.440639] usbcore: registered new device driver usb
[ 13.444381] USB Universal Host Controller Interface driver v3.0
[ 13.654365] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011c00 irq 14
[ 13.654379] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011c08 irq 15
[ 13.746666] Floppy drive(s): fd0 is 1.44M
[ 13.814140] FDC 0 is a National Semiconductor PC87306
[ 13.825098] ata1.00: ATA-5: IBM-DJSA-220, JS4IAC1A, max UDMA/66
[ 13.825112] ata1.00: 39070080 sectors, multi 16: LBA
[ 13.868935] ata1.00: configured for UDMA/33
[ 7.920000] Marking TSC unstable due to: possible TSC halt in C2.
[ 7.924000] Time: acpi_pm clocksource has been installed.
[ 8.104000] ata2.00: ATAPI: MATSHITADVD-ROM SR-8175, G228, max UDMA/33
[ 8.260000] Clocksource tsc unstable (delta = -417901424 ns)
[ 8.276000] ata2.00: configured for UDMA/33
[ 8.276000] scsi 0:0:0:0: Direct-Access ATA IBM-DJSA-220 JS4I PQ: 0 ANSI: 5
[ 8.276000] scsi 1:0:0:0: CD-ROM MATSHITA DVD-ROM SR-8175 G228 PQ: 0 ANSI: 5
[ 8.280000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 8.280000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 8.280000] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 8.280000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 8.280000] uhci_hcd 0000:00:07.2: irq 11, io base 0x00001c20
[ 8.280000] usb usb1: configuration #1 chosen from 1 choice
[ 8.280000] hub 1-0:1.0: USB hub found
[ 8.280000] hub 1-0:1.0: 2 ports detected
[ 8.324000] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB)
[ 8.324000] sd 0:0:0:0: [sda] Write Protect is off
[ 8.324000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.324000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.324000] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB)
[ 8.324000] sd 0:0:0:0: [sda] Write Protect is off
[ 8.324000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.324000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.324000] sda: sda1 sda2 sda3 < sda5 >
[ 8.376000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.396000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.396000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 8.412000] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 8.412000] Uniform CD-ROM driver Revision: 3.20
[ 8.448000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.944000] Attempting manual resume
[ 8.944000] swsusp: Resume From Partition 8:5
[ 8.944000] PM: Checking swsusp image.
[ 8.944000] PM: Resume from disk failed.
[ 8.992000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 8.992000] EXT3-fs: write access will be enabled during recovery.
[ 14.888000] kjournald starting. Commit interval 5 seconds
[ 14.888000] EXT3-fs: recovery complete.
[ 14.888000] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.184000] Linux agpgart interface v0.102 (c) Dave Jones
[ 30.236000] Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
[ 30.236000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 30.236000] Yenta: Routing CardBus interrupts to PCI
[ 30.236000] Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
[ 30.468000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[ 30.468000] Socket status: 30000006
[ 30.468000] Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
[ 30.468000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 30.468000] Yenta: Routing CardBus interrupts to PCI
[ 30.468000] Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
[ 30.700000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[ 30.700000] Socket status: 30000006
[ 30.700000] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 30.700000] piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
[ 30.700000] piix4_smbus: probe of 0000:00:07.3 failed with error -1
[ 30.700000] agpgart: Detected an Intel 440BX Chipset.
[ 30.704000] agpgart: AGP aperture is 64M @ 0xf8000000
[ 30.776000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.816000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.272000] input: PC Speaker as /class/input/input2
[ 31.952000] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 32.832000] parport_pc 00:0d: reported by Plug and Play ACPI
[ 32.832000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 33.100000] irda_init()
[ 33.100000] NET: Registered protocol family 23
[ 33.136000] pnp: Device 00:0e activated.
[ 33.136000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 33.136000] nsc-ircc, chip->init
[ 33.136000] nsc-ircc, Found chip at base=0x02e
[ 33.136000] nsc-ircc, driver loaded (Dag Brattli)
[ 33.140000] IrDA: Registered device irda0
[ 33.140000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 33.620000] cs: IO port probe 0x100-0x3af: clean.
[ 33.620000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 33.624000] cs: IO port probe 0x820-0x8ff: clean.
[ 33.624000] cs: IO port probe 0xc00-0xcf7: clean.
[ 33.624000] cs: IO port probe 0xa00-0xaff: clean.
[ 33.624000] cs: IO port probe 0x100-0x3af: clean.
[ 33.624000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 33.624000] cs: IO port probe 0x820-0x8ff: clean.
[ 33.628000] cs: IO port probe 0xc00-0xcf7: clean.
[ 33.628000] cs: IO port probe 0xa00-0xaff: clean.
[ 33.784000] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 34.352000] gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
[ 35.424000] lp0: using parport0 (interrupt-driven).
[ 35.532000] Adding 433712k swap on /dev/sda5. Priority:-1 extents:1 across:433712k
[ 35.860000] EXT3 FS on sda2, internal journal
[ 38.120000] input: Power Button (FF) as /class/input/input4
[ 38.132000] ACPI: Power Button (FF) [PWRF]
[ 38.208000] input: Lid Switch as /class/input/input5
[ 38.208000] ACPI: Lid Switch [LID]
[ 38.248000] input: Sleep Button (CM) as /class/input/input6
[ 38.248000] ACPI: Sleep Button (CM) [SLPB]
[ 38.392000] ACPI: AC Adapter [AC] (on-line)
[ 38.432000] ACPI: Battery Slot [BAT0] (battery present)
[ 38.512000] ACPI: ACPI Dock Station Driver
[ 38.552000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 38.632000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay
[ 38.632000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler
[ 38.632000] ACPI: Error installing bay notify handler
[ 38.632000] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added
[ 41.536000] eth0: setting full-duplex.
[ 41.712000] ppdev: user-space parallel port driver
[ 41.904000] audit(1206125676.231:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4577 profile="/usr/sbin/cupsd"
[ 42.028000] IBM machine detected. Enabling interrupts during APM calls.
[ 42.028000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 42.028000] apm: overridden by ACPI.
[ 42.300000] thinkpad_acpi: ThinkPad ACPI Extras v0.14
[ 42.300000] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 42.412000] thinkpad_acpi: another device driver is already handling bay events
[ 42.412000] thinkpad_acpi: disabling subdriver bay
[ 42.676000] Non-volatile memory driver v1.2
[ 42.712000] input: /usr/sbin/thinkpad-keys as /class/input/input7
[ 42.952000] ondemand governor failed to load due to too long transition latency
[ 43.172000] Failure registering capabilities with primary security module.
[ 48.492000] NET: Registered protocol family 17
[ 50.656000] NET: Registered protocol family 10
[ 50.656000] lo: Disabled Privacy Extensions
[ 60.732000] eth0: no IPv6 routers present
[ 5389.536000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5408.332000] eth0: no IPv6 routers present
[ 5738.724000] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 5738.724000] ata2: (ACPI event)
[ 5738.724000] ata2: soft resetting port
[ 5739.216000] ata2.00: configured for UDMA/33
[ 5739.216000] ata2: EH complete
olli@lappari:~$