rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@king) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 02:46:46 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] Command line: root=UUID=6eb2aefb-78f8-4cc6-ba15-40d5ec380dc9 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6c0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6c0000 - 000000007f6df000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6df000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 521920) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7E20 checksum 0
[ 0.000000] ACPI: RSDP 000F7E20, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 7F6CFD8C, 007C (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7F6DBC3A, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 7F6D0D49, AE7D (r2 INTEL CRESTLNE 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS 7F6DEFC0, 0040
[ 0.000000] ACPI: HPET 7F6DBD2E, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 7F6DBD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA 7F6DBDA2, 0032 (r1 Intel CRESTLN 6040000 5A52)
[ 0.000000] ACPI: TMOR 7F6DBDD4, 0026 (r1 PTLTD 6040000 PTL 3)
[ 0.000000] ACPI: SLIC 7F6DBDFA, 0176 (r1 HPQOEM SLIC-MPC 6040000 HPQ 1)
[ 0.000000] ACPI: APIC 7F6DBF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7F6DBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 7F6D0A6C, 02DD (r1 SataRe SataAhci 1000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7F6D08CF, 019D (r1 BrtRef DD01BRT 1000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7F6CFE08, 04E6 (r1 PmRef CpuPm 3000 INTL 20061109)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f6c0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 521920) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007f6c0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 521920
[ 0.000000] On node 0 totalpages: 521823
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1127 pages reserved
[ 0.000000] DMA zone: 2816 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7079 pages used for memmap
[ 0.000000] DMA32 zone: 510745 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 513561
[ 0.000000] Kernel command line: root=UUID=6eb2aefb-78f8-4cc6-ba15-40d5ec380dc9 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 10.662742] time.c: Detected 1662.494 MHz processor.
[ 10.664185] Console: colour VGA+ 80x25
[ 10.664206] Checking aperture...
[ 10.664220] Calgary: detecting Calgary via BIOS EBDA area
[ 10.664222] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 10.684951] Memory: 2046832k/2087680k available (2274k kernel code, 40460k reserved, 1185k data, 296k init)
[ 10.685000] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 10.762436] Calibrating delay using timer specific routine.. 3328.80 BogoMIPS (lpj=6657609)
[ 10.762471] Security Framework v1.0.0 initialized
[ 10.762479] SELinux: Disabled at boot.
[ 10.762709] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 10.764052] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 10.764673] Mount-cache hash table entries: 256
[ 10.764824] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 10.764828] CPU: L2 cache: 2048K
[ 10.764831] CPU 0/0 -> Node 0
[ 10.764833] using mwait in idle threads.
[ 10.764835] CPU: Physical Processor ID: 0
[ 10.764837] CPU: Processor Core ID: 0
[ 10.764843] CPU0: Thermal monitoring handled by SMI
[ 10.764854] SMP alternatives: switching to UP code
[ 10.765140] Early unpacking initramfs... done
[ 11.163316] ACPI: Core revision 20070126
[ 11.163384] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 11.346834] Using local APIC timer interrupts.
[ 11.406896] result 10390584
[ 11.406898] Detected 10.390 MHz APIC timer.
[ 11.409504] SMP alternatives: switching to SMP code
[ 11.409594] Booting processor 1/2 APIC 0x1
[ 11.419895] Initializing CPU#1
[ 11.497309] Calibrating delay using timer specific routine.. 3325.01 BogoMIPS (lpj=6650034)
[ 11.497317] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.497319] CPU: L2 cache: 2048K
[ 11.497322] CPU 1/1 -> Node 0
[ 11.497323] CPU: Physical Processor ID: 0
[ 11.497325] CPU: Processor Core ID: 1
[ 11.497331] CPU1: Thermal monitoring enabled (TM2)
[ 11.497675] Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d
[ 11.501318] Brought up 2 CPUs
[ 11.540051] migration_cost=14
[ 11.540228] NET: Registered protocol family 16
[ 11.540315] ACPI: bus type pci registered
[ 11.540322] PCI: Using configuration type 1
[ 11.543660] ACPI: EC: Look up EC in DSDT
[ 11.544992] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 11.549883] ACPI: System BIOS is requesting _OSI(Linux)
[ 11.549886] ACPI: Please test with "acpi_osi=!Linux"
[ 11.549887] Please send dmidecode to linux-acpi@vger.kernel.org
[ 11.553493] ACPI: Interpreter enabled
[ 11.553497] ACPI: (supports S0 S3 S4 S5)
[ 11.553516] ACPI: Using IOAPIC for interrupt routing
[ 11.565592] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 11.565641] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 11.565653] PCI: Probing PCI hardware (bus 00)
[ 11.567945] PCI: Transparent bridge - 0000:00:1e.0
[ 11.568047] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.568483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 11.568630] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 11.568774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 11.568920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 11.569084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 11.573106] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 11.573229] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 11.573346] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 11.573463] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 11.573579] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 11.573699] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 11.573814] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 11.573927] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 11.574055] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 11.574070] pnp: PnP ACPI init
[ 11.574078] ACPI: bus type pnp registered
[ 11.577119] pnp: PnP ACPI: found 10 devices
[ 11.577121] ACPI: ACPI bus type pnp unregistered
[ 11.577180] PCI: Using ACPI for IRQ routing
[ 11.577182] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 11.577354] NET: Registered protocol family 8
[ 11.577356] NET: Registered protocol family 20
[ 11.577373] PCI-GART: No AMD northbridge found.
[ 11.577379] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 11.577384] hpet0: 3 64-bit timers, 14318180 Hz
[ 11.578436] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 11.578440] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 11.578443] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 11.578446] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 11.578454] pnp: 00:06: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 11.578772] PCI: Bridge: 0000:00:1c.0
[ 11.578776] IO window: 2000-2fff
[ 11.578783] MEM window: f2000000-f3ffffff
[ 11.578788] PREFETCH window: f0000000-f1ffffff
[ 11.578795] PCI: Bridge: 0000:00:1c.1
[ 11.578798] IO window: 3000-3fff
[ 11.578805] MEM window: f4200000-f42fffff
[ 11.578810] PREFETCH window: disabled.
[ 11.578816] PCI: Bridge: 0000:00:1c.2
[ 11.578817] IO window: disabled.
[ 11.578823] MEM window: disabled.
[ 11.578828] PREFETCH window: disabled.
[ 11.578834] PCI: Bridge: 0000:00:1c.3
[ 11.578836] IO window: disabled.
[ 11.578842] MEM window: f4300000-f43fffff
[ 11.578847] PREFETCH window: disabled.
[ 11.578854] PCI: Bridge: 0000:00:1e.0
[ 11.578855] IO window: disabled.
[ 11.578862] MEM window: f4400000-f44fffff
[ 11.578866] PREFETCH window: disabled.
[ 11.578898] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 11.578905] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 11.578930] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 11.578937] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 11.578962] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 11.578968] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 11.578994] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 11.579000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 11.579015] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 11.579027] NET: Registered protocol family 2
[ 11.581183] Time: hpet clocksource has been installed.
[ 11.621199] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 11.622021] TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
[ 11.625458] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 11.626049] TCP: Hash tables configured (established 262144 bind 65536)
[ 11.626052] TCP reno registered
[ 11.641247] checking if image is initramfs... it is
[ 12.427224] Freeing initrd memory: 7212k freed
[ 12.431195] Simple Boot Flag at 0x36 set to 0x1
[ 12.431772] audit: initializing netlink socket (disabled)
[ 12.431792] audit(1206046735.576:1): initialized
[ 12.433974] VFS: Disk quotas dquot_6.5.1
[ 12.434024] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 12.434117] io scheduler noop registered
[ 12.434120] io scheduler anticipatory registered
[ 12.434122] io scheduler deadline registered
[ 12.434219] io scheduler cfq registered (default)
[ 12.434235] Boot video device is 0000:00:02.0
[ 12.436698] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 12.436762] assign_interrupt_mode Found MSI capability
[ 12.436766] Allocate Port Service[0000:00:1c.0:pcie00]
[ 12.436804] Allocate Port Service[0000:00:1c.0:pcie02]
[ 12.436911] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 12.436974] assign_interrupt_mode Found MSI capability
[ 12.436976] Allocate Port Service[0000:00:1c.1:pcie00]
[ 12.437005] Allocate Port Service[0000:00:1c.1:pcie02]
[ 12.437109] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 12.437171] assign_interrupt_mode Found MSI capability
[ 12.437174] Allocate Port Service[0000:00:1c.2:pcie00]
[ 12.437205] Allocate Port Service[0000:00:1c.2:pcie02]
[ 12.437310] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 12.437372] assign_interrupt_mode Found MSI capability
[ 12.437374] Allocate Port Service[0000:00:1c.3:pcie00]
[ 12.437404] Allocate Port Service[0000:00:1c.3:pcie02]
[ 12.459128] Real Time Clock Driver v1.12ac
[ 12.459367] hpet_resources: 0xfed00000 is busy
[ 12.459390] Linux agpgart interface v0.102 (c) Dave Jones
[ 12.459393] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.460439] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 12.460574] input: Macintosh mouse button emulation as /class/input/input0
[ 12.460651] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 12.460948] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 12.461030] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.461034] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 12.461037] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 12.461039] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 12.461042] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 12.461150] mice: PS/2 mouse device common for all mice
[ 12.461291] TCP cubic registered
[ 12.461351] NET: Registered protocol family 1
[ 12.461585] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 12.461593] Freeing unused kernel memory: 296k freed
[ 12.467646] input: AT Translated Set 2 keyboard as /class/input/input1
[ 13.640538] AppArmor: AppArmor initialized<5>audit(1206046736.788:2): type=1505 info="AppArmor initialized" pid=1262
[ 13.647038] fuse init (API version 7.8)
[ 13.651110] Failure registering capabilities with primary security module.
[ 13.681417] ACPI: SSDT 7F6D0611, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20061109)
[ 13.681674] ACPI: SSDT 7F6D02EE, 029E (r1 PmRef Cpu0Cst 3001 INTL 20061109)
[ 13.682280] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 13.682531] ACPI: SSDT 7F6D0807, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20061109)
[ 13.682768] ACPI: SSDT 7F6D058C, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20061109)
[ 13.683401] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 13.691637] ACPI: Thermal Zone [TZS0] (48 C)
[ 13.694691] ACPI: Thermal Zone [TZS1] (46 C)
[ 14.095713] usbcore: registered new interface driver usbfs
[ 14.095738] usbcore: registered new interface driver hub
[ 14.095761] usbcore: registered new device driver usb
[ 14.096412] USB Universal Host Controller Interface driver v3.0
[ 14.096501] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.096513] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 14.096517] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 14.096648] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 14.096683] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
[ 14.096792] usb usb1: configuration #1 chosen from 1 choice
[ 14.096818] hub 1-0:1.0: USB hub found
[ 14.096823] hub 1-0:1.0: 2 ports detected
[ 14.141697] SCSI subsystem initialized
[ 14.146194] libata version 2.21 loaded.
[ 14.197376] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 14.197390] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 14.197394] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 14.197418] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 14.197451] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860
[ 14.197552] usb usb2: configuration #1 chosen from 1 choice
[ 14.197576] hub 2-0:1.0: USB hub found
[ 14.197581] hub 2-0:1.0: 2 ports detected
[ 14.250970] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 14.250984] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 14.250988] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.251145] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 14.251181] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 14.251546] usb usb3: configuration #1 chosen from 1 choice
[ 14.251709] hub 3-0:1.0: USB hub found
[ 14.251715] hub 3-0:1.0: 2 ports detected
[ 14.273109] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 14.273119] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 14.273123] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.273288] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 14.273322] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 14.273713] usb usb4: configuration #1 chosen from 1 choice
[ 14.273886] hub 4-0:1.0: USB hub found
[ 14.273892] hub 4-0:1.0: 2 ports detected
[ 14.292925] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 14.292935] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 14.292939] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.293118] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 14.293151] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 14.293581] usb usb5: configuration #1 chosen from 1 choice
[ 14.293776] hub 5-0:1.0: USB hub found
[ 14.293782] hub 5-0:1.0: 2 ports detected
[ 14.316686] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 14.317325] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 14.317332] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 14.317665] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 14.317703] ehci_hcd 0000:00:1a.7: debug port 1
[ 14.317711] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 14.317718] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4705c00
[ 14.322947] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 14.323069] usb usb6: configuration #1 chosen from 1 choice
[ 14.323097] hub 6-0:1.0: USB hub found
[ 14.323106] hub 6-0:1.0: 4 ports detected
[ 14.358572] ahci 0000:00:1f.2: version 2.2
[ 14.358617] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 20
[ 14.552115] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 14.552122] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 14.552131] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 14.552407] scsi0 : ahci
[ 14.552476] scsi1 : ahci
[ 14.552565] scsi2 : ahci
[ 14.552651] ata1: SATA max UDMA/133 cmd 0xffffc20000ace100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 20
[ 14.552656] ata2: SATA max UDMA/133 cmd 0xffffc20000ace180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 20
[ 14.552660] ata3: SATA max UDMA/133 cmd 0xffffc20000ace200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 20
[ 14.641182] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 14.643659] ata1.00: ATA-8: SAMSUNG HM160HI, HH100-10, max UDMA/100
[ 14.643665] ata1.00: 312581808 sectors, multi 16: LBA48
[ 14.646215] ata1.00: configured for UDMA/100
[ 14.700292] ata2: SATA link down (SStatus 0 SControl 300)
[ 14.754383] ata3: SATA link down (SStatus 0 SControl 300)
[ 14.754542] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HI HH10 PQ: 0 ANSI: 5
[ 14.754921] ACPI: PCI Interrupt 0000:08:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.807525] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 14.807536] sd 0:0:0:0: [sda] Write Protect is off
[ 14.807539] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.807553] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.807601] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 14.807610] sd 0:0:0:0: [sda] Write Protect is off
[ 14.807612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.807626] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.807631] sda:<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f4400000-f44007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 14.814289] ata_piix 0000:00:1f.1: version 2.11
[ 14.814304] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 14.814337] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 14.814395] scsi3 : ata_piix
[ 14.816794] scsi4 : ata_piix
[ 14.816877] ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011830 irq 14
[ 14.816881] ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011838 irq 15
[ 15.134000] ata4.00: ATAPI: MATSHITADVD-RAM UJ-861H, 1.50, max MWDMA2
[ 15.305725] ata4.00: configured for MWDMA2
[ 15.420163] sda1 sda2 sda3 sda4
[ 15.442389] sd 0:0:0:0: [sda] Attached SCSI disk
[ 15.446035] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.474563] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-861H 1.50 PQ: 0 ANSI: 5
[ 15.474636] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 15.474808] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 15.475382] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 15.475390] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 15.475438] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 15.475476] ehci_hcd 0000:00:1d.7: debug port 1
[ 15.475483] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 15.475492] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4706000
[ 15.479361] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 15.479474] usb usb7: configuration #1 chosen from 1 choice
[ 15.479502] hub 7-0:1.0: USB hub found
[ 15.479509] hub 7-0:1.0: 6 ports detected
[ 15.491263] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 15.491270] Uniform CD-ROM driver Revision: 3.20
[ 15.491346] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 15.803717] Attempting manual resume
[ 15.803720] swsusp: Resume From Partition 8:3
[ 15.803722] PM: Checking swsusp image.
[ 15.803884] PM: Resume from disk failed.
[ 15.843331] kjournald starting. Commit interval 5 seconds
[ 15.843364] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.880492] usb 7-5: new high speed USB device using ehci_hcd and address 2
[ 16.025343] usb 7-5: configuration #1 chosen from 1 choice
[ 16.080517] ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a0023205051]
[ 22.857789] agpgart: Detected an Intel 965GM Chipset.
[ 22.858831] agpgart: Detected 7676K stolen memory.
[ 22.872137] agpgart: AGP aperture is 256M @ 0xd0000000
[ 22.941816] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 22.969387] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.278138] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 23.278154] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 23.278718] sky2 0000:05:00.0: v1.18 addr 0xf4200000 irq 17 Yukon-FE (0xb7) rev 3
[ 23.278905] sky2 eth0: addr 00:1d:72:41:ed:cc
[ 23.299333] Linux video capture interface: v2.00
[ 23.412901] sdhci: Secure Digital Host Controller Interface driver
[ 23.412905] sdhci: Copyright(c) Pierre Ossman
[ 23.412942] sdhci: SDHCI controller found at 0000:08:09.1 [1180:0822] (rev 22)
[ 23.412966] ACPI: PCI Interrupt 0000:08:09.1[B] -> GSI 18 (level, low) -> IRQ 18
[ 23.413587] mmc0: SDHCI at 0xf4400800 irq 18 DMA
[ 23.426155] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b016)
[ 23.427860] usbcore: registered new interface driver uvcvideo
[ 23.427864] USB Video Class driver (v0.1.0)
[ 23.430581] input: PS/2 Mouse as /class/input/input2
[ 23.444647] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[ 23.448517] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0
[ 23.448521] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 23.448943] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 23.448954] PCI: Setting latency timer of device 0000:07:00.0 to 64
[ 23.449510] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 23.787751] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 23.788003] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[ 23.966485] snd_hda_intel: disagrees about version of symbol snd_ctl_add
[ 23.966490] snd_hda_intel: Unknown symbol snd_ctl_add
[ 23.966525] snd_hda_intel: disagrees about version of symbol snd_pcm_new
[ 23.966527] snd_hda_intel: Unknown symbol snd_pcm_new
[ 23.966563] snd_hda_intel: disagrees about version of symbol snd_pcm_limit_hw_rates
[ 23.966565] snd_hda_intel: Unknown symbol snd_pcm_limit_hw_rates
[ 23.966596] snd_hda_intel: disagrees about version of symbol snd_card_register
[ 23.966598] snd_hda_intel: Unknown symbol snd_card_register
[ 23.966625] snd_hda_intel: disagrees about version of symbol snd_card_free
[ 23.966627] snd_hda_intel: Unknown symbol snd_card_free
[ 23.966653] snd_hda_intel: disagrees about version of symbol snd_pcm_lib_preallocate_pages_for_all
[ 23.966656] snd_hda_intel: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
[ 23.966683] snd_hda_intel: disagrees about version of symbol snd_card_proc_new
[ 23.966686] snd_hda_intel: Unknown symbol snd_card_proc_new
[ 23.966787] snd_hda_intel: disagrees about version of symbol snd_ctl_find_id
[ 23.966789] snd_hda_intel: Unknown symbol snd_ctl_find_id
[ 23.966860] snd_hda_intel: disagrees about version of symbol snd_ctl_new1
[ 23.966862] snd_hda_intel: Unknown symbol snd_ctl_new1
[ 23.966921] snd_hda_intel: disagrees about version of symbol snd_component_add
[ 23.966924] snd_hda_intel: Unknown symbol snd_component_add
[ 23.966957] snd_hda_intel: disagrees about version of symbol snd_card_new
[ 23.966959] snd_hda_intel: Unknown symbol snd_card_new
[ 23.967016] snd_hda_intel: disagrees about version of symbol snd_pcm_lib_malloc_pages
[ 23.967018] snd_hda_intel: Unknown symbol snd_pcm_lib_malloc_pages
[ 23.967054] snd_hda_intel: disagrees about version of symbol snd_pcm_lib_ioctl
[ 23.967056] snd_hda_intel: Unknown symbol snd_pcm_lib_ioctl
[ 23.967084] snd_hda_intel: disagrees about version of symbol snd_pcm_lib_free_pages
[ 23.967087] snd_hda_intel: Unknown symbol snd_pcm_lib_free_pages
[ 23.967128] snd_hda_intel: Unknown symbol snd_ctl_elem_read
[ 23.967167] snd_hda_intel: Unknown symbol snd_ctl_elem_write
[ 23.967191] snd_hda_intel: disagrees about version of symbol snd_pcm_set_ops
[ 23.967194] snd_hda_intel: Unknown symbol snd_pcm_set_ops
[ 23.967226] snd_hda_intel: disagrees about version of symbol snd_pcm_hw_constraint_list
[ 23.967229] snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_list
[ 23.967265] snd_hda_intel: disagrees about version of symbol snd_device_new
[ 23.967267] snd_hda_intel: Unknown symbol snd_device_new
[ 23.967313] snd_hda_intel: disagrees about version of symbol snd_pcm_suspend_all
[ 23.967316] snd_hda_intel: Unknown symbol snd_pcm_suspend_all
[ 23.967354] snd_hda_intel: disagrees about version of symbol snd_card_disconnect
[ 23.967356] snd_hda_intel: Unknown symbol snd_card_disconnect
[ 23.967381] snd_hda_intel: disagrees about version of symbol snd_pcm_hw_constraint_integer
[ 23.967383] snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_integer
[ 23.967516] snd_hda_intel: disagrees about version of symbol snd_pcm_period_elapsed
[ 23.967519] snd_hda_intel: Unknown symbol snd_pcm_period_elapsed
[ 23.967543] snd_hda_intel: disagrees about version of symbol snd_pcm_hw_constraint_step
[ 23.967545] snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_step
[ 24.126754] lp: driver loaded but no devices found
[ 24.207662] Adding 1951888k swap on /dev/sda3. Priority:-1 extents:1 across:1951888k
[ 24.643369] EXT3 FS on sda2, internal journal
[ 26.612997] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 26.618244] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 26.649304] ACPI: AC Adapter [ADP1] (off-line)
[ 26.676665] No dock devices found.
[ 26.699894] input: Power Button (FF) as /class/input/input4
[ 26.699916] ACPI: Power Button (FF) [PWRF]
[ 26.699962] input: Lid Switch as /class/input/input5
[ 26.699978] ACPI: Lid Switch [LID0]
[ 26.700016] input: Sleep Button (CM) as /class/input/input6
[ 26.700036] ACPI: Sleep Button (CM) [SLPB]
[ 26.781495] ACPI: Battery Slot [BAT0] (battery present)
[ 27.756537] Failure registering capabilities with primary security module.
[ 27.948988] ppdev: user-space parallel port driver
[ 28.074783] sky2 eth0: enabling interface
[ 28.166567] audit(1206061154.269:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5067 profile="/usr/sbin/cupsd"
[ 28.646363] Bluetooth: Core ver 2.11
[ 28.646563] NET: Registered protocol family 31
[ 28.646568] Bluetooth: HCI device and connection manager initialized
[ 28.646573] Bluetooth: HCI socket layer initialized
[ 28.665277] Bluetooth: L2CAP ver 2.8
[ 28.665284] Bluetooth: L2CAP socket layer initialized
[ 28.715233] Bluetooth: RFCOMM socket layer initialized
[ 28.715410] Bluetooth: RFCOMM TTY layer initialized
[ 28.715415] Bluetooth: RFCOMM ver 1.8
[ 31.697453] [drm] Initialized drm 1.1.0 20060810
[ 31.700541] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 31.700948] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 41.131441] NET: Registered protocol family 17
[ 42.143949] wlan0: Initial auth_alg=0
[ 42.143958] wlan0: authenticate with AP 00:0b:86:56:58:40
[ 42.146150] wlan0: RX authentication from 00:0b:86:56:58:40 (alg=0 transaction=2 status=0)
[ 42.146157] wlan0: authenticated
[ 42.146161] wlan0: associate with AP 00:0b:86:56:58:40
[ 42.148949] wlan0: RX AssocResp from 00:0b:86:56:58:40 (capab=0x421 status=0 aid=2)
[ 42.148956] wlan0: associated
[ 46.642063] NET: Registered protocol family 10
[ 46.642257] lo: Disabled Privacy Extensions
[ 46.642374] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 49.177842] wlan0: no IPv6 routers present
[ 82.023645] atkbd.c: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 82.023653] atkbd.c: Use 'setkeycodes e058 <keycode>' to make it known.
[ 82.024227] atkbd.c: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 82.024234] atkbd.c: Use 'setkeycodes e058 <keycode>' to make it known.