rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff10000 (usable)
[ 0.000000] BIOS-e820: 000000007ff10000 - 000000007ff1a000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff1a000 - 000000007ff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fc000000 - 00000000fe000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7d20
[ 0.000000] Entering add_active_range(0, 0, 524048) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524048
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524048
[ 0.000000] On node 0 totalpages: 524048
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292370 pages, LIFO batch:31
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7CF0 checksum 0
[ 0.000000] ACPI: RSDP 000F7CF0, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 7FF1716C, 0040 (r1 FSC PC 60000 LTP 0)
[ 0.000000] ACPI: FACP 7FF19BFE, 0074 (r1 FSC 60000 F4240)
[ 0.000000] ACPI: DSDT 7FF171AC, 2A52 (r1 FSC D256x 60000 MSFT 3000001)
[ 0.000000] ACPI: FACS 7FF1AFC0, 0040
[ 0.000000] ACPI: SSDT 7FF19C72, 0136 (r1 PTLTD POWERNOW 60000 LTP 1)
[ 0.000000] ACPI: APIC 7FF19DA8, 0046 (r1 PTLTD APIC 60000 LTP 0)
[ 0.000000] ACPI: SLIC 7FF19DEE, 0176 (r1 FSC PC 60000 LTP 0)
[ 0.000000] ACPI: MCFG 7FF19F64, 003C (r1 PTLTD MCFG 60000 LTP 0)
[ 0.000000] ACPI: HPET 7FF19FA0, 0038 (r1 PTLTD HPETTBL 60000 LTP 1)
[ 0.000000] ACPI: BOOT 7FF19FD8, 0028 (r1 PTLTD $SBFTBL$ 60000 LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7c000000)
[ 0.000000] Built 1 zonelists. Total pages: 519954
[ 0.000000] Kernel command line: root=/dev/sda6
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2411.036 MHz processor.
[ 51.399836] spurious 8259A interrupt: IRQ7.
[ 51.401861] Console: colour VGA+ 80x25
[ 51.404191] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 51.404553] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 51.464538] Memory: 2066840k/2096192k available (2015k kernel code, 28136k reserved, 915k data, 364k init, 1178688k highmem)
[ 51.464603] virtual kernel memory layout:
[ 51.464604] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 51.464605] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 51.464606] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 51.464607] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 51.464608] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 51.464609] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 51.464610] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 51.464932] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 51.465040] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 51.465207] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 51.465350] hpet0: 3 32-bit timers, 25000000 Hz
[ 51.546271] Calibrating delay using timer specific routine.. 4825.87 BogoMIPS (lpj=9651741)
[ 51.546368] Security Framework v1.0.0 initialized
[ 51.546414] SELinux: Disabled at boot.
[ 51.546462] Mount-cache hash table entries: 512
[ 51.546603] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d
[ 51.546610] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 51.546654] CPU: L2 Cache: 512K (64 bytes/line)
[ 51.546696] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001d
[ 51.546703] Compat vDSO mapped to ffffe000.
[ 51.546751] Checking 'hlt' instruction... OK.
[ 51.562402] SMP alternatives: switching to UP code
[ 51.562613] Freeing SMP alternatives: 11k freed
[ 51.562881] Early unpacking initramfs... done
[ 51.800708] ACPI: Core revision 20070126
[ 51.800787] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 51.806348] CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 02
[ 51.806452] Total of 1 processors activated (4825.87 BogoMIPS).
[ 51.806785] ENABLING IO-APIC IRQs
[ 51.807049] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 51.846749] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 51.846791] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 51.846860] ...trying to set up timer as Virtual Wire IRQ... failed.
[ 51.886575] ...trying to set up timer as ExtINT IRQ... works.
[ 52.133299] Brought up 1 CPUs
[ 52.133437] Booting paravirtualized kernel on bare hardware
[ 52.133525] Time: 15:59:43 Date: 02/19/108
[ 52.133578] NET: Registered protocol family 16
[ 52.133675] EISA bus registered
[ 52.133715] ACPI: bus type pci registered
[ 52.141871] PCI: BIOS BUG #81[49435000] found
[ 52.141911] PCI: Using configuration type 1
[ 52.141951] Setting up standard PCI resources
[ 52.143012] ACPI: EC: Look up EC in DSDT
[ 52.144491] ACPI: Interpreter enabled
[ 52.144531] ACPI: (supports S0 S1 S3 S4 S5)
[ 52.144731] ACPI: Using IOAPIC for interrupt routing
[ 52.145626] ACPI: Device [TPM] status [00000008]: functional but not present; setting present
[ 52.147178] ACPI: Device [LPT] status [00000008]: functional but not present; setting present
[ 52.147348] ACPI: Device [ECP] status [00000008]: functional but not present; setting present
[ 52.147632] ACPI: Device [COM2] status [00000008]: functional but not present; setting present
[ 52.147834] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 52.147879] PCI: Probing PCI hardware (bus 00)
[ 52.148660] PCI: Transparent bridge - 0000:00:10.0
[ 52.148724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 52.148768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT]
[ 52.148785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT]
[ 52.148804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT]
[ 52.148821] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 52.151364] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 52.151762] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 52.152162] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 52.152557] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 52.152953] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19 20 21 22 23) *11
[ 52.153376] ACPI: PCI Interrupt Link [LNKF] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 52.153823] ACPI: PCI Interrupt Link [LNKG] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 52.154269] ACPI: PCI Interrupt Link [LNKH] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 52.154715] ACPI: PCI Interrupt Link [LNKI] (IRQs 16 17 18 19 20 21 22 23) *7
[ 52.155126] ACPI: PCI Interrupt Link [LNKJ] (IRQs 16 17 18 19 20 21 22 23) *11
[ 52.155547] ACPI: PCI Interrupt Link [LNKK] (IRQs 16 17 18 19 20 21 22 23) *10
[ 52.155967] ACPI: PCI Interrupt Link [LNKL] (IRQs 16 17 18 19 20 21 22 23) *10
[ 52.156387] ACPI: PCI Interrupt Link [LNKM] (IRQs 16 17 18 19 20 21 22 23) *11
[ 52.156813] ACPI: PCI Interrupt Link [LNKN] (IRQs 16 17 18 19 20 21 22 23) *5
[ 52.157228] ACPI: PCI Interrupt Link [LNKO] (IRQs 16 17 18 19 20 21 22 23) *10
[ 52.157695] ACPI: PCI Interrupt Link [LNKP] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 52.158105] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 52.158154] pnp: PnP ACPI init
[ 52.158196] ACPI: bus type pnp registered
[ 52.159275] pnp: PnP ACPI: found 9 devices
[ 52.159315] ACPI: ACPI bus type pnp unregistered
[ 52.159357] PnPBIOS: Disabled by ACPI PNP
[ 52.159430] PCI: Using ACPI for IRQ routing
[ 52.159471] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 52.159587] NET: Registered protocol family 8
[ 52.159628] NET: Registered protocol family 20
[ 52.159710] pnp: 00:01: iomem range 0xfc000000-0xfdffffff could not be reserved
[ 52.159764] pnp: 00:01: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 52.159818] pnp: 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 52.161227] Time: tsc clocksource has been installed.
[ 52.161278] Switched to high resolution mode on CPU 0
[ 52.190011] PCI: Bridge: 0000:00:02.0
[ 52.190050] IO window: disabled.
[ 52.190090] MEM window: disabled.
[ 52.190129] PREFETCH window: disabled.
[ 52.190170] PCI: Bridge: 0000:00:03.0
[ 52.190209] IO window: disabled.
[ 52.190248] MEM window: disabled.
[ 52.190287] PREFETCH window: disabled.
[ 52.190330] PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:03:00.0
[ 52.190383] PCI: Bridge: 0000:00:04.0
[ 52.190422] IO window: disabled.
[ 52.190462] MEM window: f0000000-f1ffffff
[ 52.190503] PREFETCH window: e0000000-efffffff
[ 52.190544] PCI: Bridge: 0000:00:10.0
[ 52.190583] IO window: disabled.
[ 52.190623] MEM window: disabled.
[ 52.190663] PREFETCH window: disabled.
[ 52.190711] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 52.190716] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 52.190720] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 52.190726] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 52.190737] NET: Registered protocol family 2
[ 52.225122] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 52.225257] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 52.226364] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 52.226780] TCP: Hash tables configured (established 131072 bind 65536)
[ 52.226824] TCP reno registered
[ 52.237174] checking if image is initramfs... it is
[ 52.705249] Freeing initrd memory: 7052k freed
[ 52.705374] Simple Boot Flag at 0x36 set to 0x1
[ 52.705631] audit: initializing netlink socket (disabled)
[ 52.705683] audit(1205942383.016:1): initialized
[ 52.705769] highmem bounce pool size: 64 pages
[ 52.706964] VFS: Disk quotas dquot_6.5.1
[ 52.707036] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 52.707141] io scheduler noop registered
[ 52.707181] io scheduler anticipatory registered
[ 52.707221] io scheduler deadline registered
[ 52.707270] io scheduler cfq registered (default)
[ 52.911938] Boot video device is 0000:03:00.0
[ 52.911999] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 52.912016] assign_interrupt_mode Found MSI capability
[ 52.912058] Allocate Port Service[0000:00:02.0:pcie00]
[ 52.912102] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 52.912117] assign_interrupt_mode Found MSI capability
[ 52.912159] Allocate Port Service[0000:00:03.0:pcie00]
[ 52.912198] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 52.912213] assign_interrupt_mode Found MSI capability
[ 52.912255] Allocate Port Service[0000:00:04.0:pcie00]
[ 52.912338] isapnp: Scanning for PnP cards...
[ 53.264809] isapnp: No Plug & Play device found
[ 53.280524] Real Time Clock Driver v1.12ac
[ 53.280705] hpet_resources: 0xfed00000 is busy
[ 53.280717] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 53.280868] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 53.281408] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 53.281871] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 53.282074] input: Macintosh mouse button emulation as /class/input/input0
[ 53.282186] PNP: No PS/2 controller found. Probing ports directly.
[ 53.285128] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 53.285173] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 53.285322] mice: PS/2 mouse device common for all mice
[ 53.285440] EISA: Probing bus 0 at eisa.0
[ 53.285484] Cannot allocate resource for EISA slot 1
[ 53.285539] Cannot allocate resource for EISA slot 8
[ 53.285580] EISA: Detected 0 cards.
[ 53.285689] TCP cubic registered
[ 53.285735] NET: Registered protocol family 1
[ 53.285790] Using IPI No-Shortcut mode
[ 53.285973] Magic number: 0:442:993
[ 53.286020] hash matches device ttyd6
[ 53.286391] Freeing unused kernel memory: 364k freed
[ 53.445047] AppArmor: AppArmor initialized<5>audit(1205942383.516:2): type=1505 info="AppArmor initialized" pid=1190
[ 53.451632] fuse init (API version 7.8)
[ 53.455359] Failure registering capabilities with primary security module.
[ 53.469584] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 54.004863] usbcore: registered new interface driver usbfs
[ 54.004923] usbcore: registered new interface driver hub
[ 54.004977] usbcore: registered new device driver usb
[ 54.005483] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 54.005689] ACPI: PCI Interrupt Link [LNKJ] enabled at IRQ 23
[ 54.005740] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKJ] -> GSI 23 (level, high) -> IRQ 16
[ 54.005852] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 54.005855] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 54.006007] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 54.006108] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xf2204000
[ 54.026371] SCSI subsystem initialized
[ 54.029647] libata version 2.21 loaded.
[ 54.064801] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 54.099966] usb usb1: configuration #1 chosen from 1 choice
[ 54.100029] hub 1-0:1.0: USB hub found
[ 54.100076] hub 1-0:1.0: 8 ports detected
[ 54.166906] Floppy drive(s): fd0 is 1.44M
[ 54.185288] FDC 0 is a post-1991 82077
[ 54.202199] ACPI: PCI Interrupt Link [LNKI] enabled at IRQ 22
[ 54.202252] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LNKI] -> GSI 22 (level, high) -> IRQ 17
[ 54.202365] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 54.202367] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 54.202515] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[ 54.202590] ehci_hcd 0000:00:0b.1: debug port 1
[ 54.202632] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 54.202642] ehci_hcd 0000:00:0b.1: irq 17, io mem 0xf2208000
[ 54.202689] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 54.202950] usb usb2: configuration #1 chosen from 1 choice
[ 54.203088] hub 2-0:1.0: USB hub found
[ 54.203132] hub 2-0:1.0: 8 ports detected
[ 54.308618] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 54.308665] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 54.309146] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[ 54.309203] NFORCE-MCP51: chipset revision 241
[ 54.309243] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 54.309288] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
[ 54.309344] NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
[ 54.309392] ide0: BM-DMA at 0x8c00-0x8c07, BIOS settings: hda:pio, hdb:pio
[ 54.309512] Probing IDE interface ide0...
[ 54.848550] usb 1-3: new low speed USB device using ohci_hcd and address 2
[ 54.876586] sata_nv 0000:00:0e.0: version 3.4
[ 54.876599] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
[ 54.876813] ACPI: PCI Interrupt Link [LNKN] enabled at IRQ 21
[ 54.876863] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKN] -> GSI 21 (level, high) -> IRQ 18
[ 54.876997] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 54.877050] scsi0 : sata_nv
[ 54.877270] scsi1 : sata_nv
[ 54.877423] ata1: SATA max UDMA/133 cmd 0x00018c40 ctl 0x00018c36 bmdma 0x00018c10 irq 18
[ 54.877478] ata2: SATA max UDMA/133 cmd 0x00018c38 ctl 0x00018c32 bmdma 0x00018c18 irq 18
[ 55.079276] usb 1-3: configuration #1 chosen from 1 choice
[ 55.091250] usbcore: registered new interface driver hiddev
[ 55.108408] input: USB Keyboard as /class/input/input1
[ 55.108460] input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:0b.0-3
[ 55.131246] input: USB Keyboard as /class/input/input2
[ 55.131290] input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:0b.0-3
[ 55.131399] usbcore: registered new interface driver usbhid
[ 55.131442] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 55.343700] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 55.402545] ata1.00: ATA-7: ST380815AS, 3.AAA, max UDMA/133
[ 55.402588] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 55.469063] ata1.00: configured for UDMA/133
[ 55.934670] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 56.098522] ata2.00: ATAPI: HL-DT-STDVD-ROM GDRH20N, 0F04, max UDMA/100
[ 56.270227] ata2.00: configured for UDMA/100
[ 56.270592] scsi 0:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5
[ 56.272281] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDRH20N 0F04 PQ: 0 ANSI: 5
[ 56.272691] ACPI: PCI Interrupt Link [LNKO] enabled at IRQ 20
[ 56.272741] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKO] -> GSI 20 (level, high) -> IRQ 19
[ 56.272877] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 56.272914] scsi2 : sata_nv
[ 56.273060] scsi3 : sata_nv
[ 56.273217] ata3: SATA max UDMA/133 cmd 0x00018c58 ctl 0x00018c4e bmdma 0x00018c20 irq 19
[ 56.273273] ata4: SATA max UDMA/133 cmd 0x00018c50 ctl 0x00018c4a bmdma 0x00018c28 irq 19
[ 56.581539] ata3: SATA link down (SStatus 0 SControl 300)
[ 56.900980] ata4: SATA link down (SStatus 0 SControl 300)
[ 56.911904] ACPI: PCI Interrupt Link [LNKL] enabled at IRQ 19
[ 56.911955] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKL] -> GSI 19 (level, high) -> IRQ 20
[ 56.912064] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 56.912070] forcedeth: using HIGHDMA
[ 56.925067] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 56.925126] sd 0:0:0:0: [sda] Write Protect is off
[ 56.925167] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 56.925178] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 56.925272] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 56.925319] sd 0:0:0:0: [sda] Write Protect is off
[ 56.925360] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 56.925370] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 56.925425] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 57.061219] sd 0:0:0:0: [sda] Attached SCSI disk
[ 57.064818] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 57.064956] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 57.076946] sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
[ 57.076993] Uniform CD-ROM driver Revision: 3.20
[ 57.077070] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 57.428595] eth0: forcedeth.c: subsystem: 01734:10c6 bound to 0000:00:14.0
[ 57.450507] kjournald starting. Commit interval 5 seconds
[ 57.450558] EXT3-fs: mounted filesystem with ordered data mode.
[ 62.867627] eth0: no link during initialization.
[ 64.078948] NET: Registered protocol family 10
[ 64.079055] lo: Disabled Privacy Extensions
[ 64.079243] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 64.441180] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 64.476781] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 64.627573] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x88c0
[ 64.627636] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x8880
[ 64.798497] Linux agpgart interface v0.102 (c) Dave Jones
[ 64.851061] input: PC Speaker as /class/input/input3
[ 65.011031] nvidia: module license 'NVIDIA' taints kernel.
[ 65.278995] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 18
[ 65.279049] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKE] -> GSI 18 (level, high) -> IRQ 21
[ 65.279159] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 65.279340] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 65.338150] usbcore: registered new interface driver xpad
[ 65.338196] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 65.598189] ACPI: PCI Interrupt Link [LNKM] enabled at IRQ 17
[ 65.598242] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKM] -> GSI 17 (level, high) -> IRQ 22
[ 65.598362] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 65.979686] lp: driver loaded but no devices found
[ 66.739748] EXT3 FS on sda6, internal journal
[ 67.323923] kjournald starting. Commit interval 5 seconds
[ 67.324026] EXT3 FS on sda5, internal journal
[ 67.324029] EXT3-fs: mounted filesystem with ordered data mode.