rendered paste bodyLista:
// Najpierw RAMy:
free -mt
root@alien:/home/alien# free -mt
total used free shared buffers cached
Mem: 503 479 24 0 22 235
-/+ buffers/cache: 220 283
Swap: 635 30 604
Total: 1139 509 629
// Procek/Architektura
cat /proc/cpuinfo
root@alien:/home/alien# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.66GHz
stepping : 9
cpu MHz : 2666.174
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up cid xtpr
bogomips : 5335.77
clflush size : 64
// Teraz urzadzenia PCI
lspci
root@alien:/home/alien# lspci
00:00.0 Host bridge: Broadcom GCNB-LE Host Bridge (rev 32)
00:00.1 Host bridge: Broadcom GCNB-LE Host Bridge
00:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
00:04.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
00:09.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:0f.0 ISA bridge: Broadcom CSB6 South Bridge (rev a0)
00:0f.1 IDE interface: Broadcom CSB6 RAID/IDE Controller (rev a0)
00:0f.2 USB Controller: Broadcom CSB6 OHCI USB Controller (rev 05)
00:0f.3 Host bridge: Broadcom GCLE-2 Host Bridge
// Teraz dmesg
dmesg
root@alien:/home/alien# dmesg
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Tue Feb 12 05:41:34 UTC 2008 (Ubuntu 2.6.20-16.35-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fefb000 end: 000000001fffb000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fffb000 size: 0000000000004000 end: 000000001ffff000 type: 3
[ 0.000000] copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end: 0000000020000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffb000 (usable)
[ 0.000000] BIOS-e820: 000000001fffb000 - 000000001ffff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f07b0
[ 0.000000] Entering add_active_range(0, 0, 131067) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131067
[ 0.000000] HighMem 131067 -> 131067
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131067
[ 0.000000] On node 0 totalpages: 131067
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125980 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 HP ) @ 0x000f5260
[ 0.000000] ACPI: RSDT (v001 HP HWPC22E 0x42302e31 MSFT 0x31313031) @ 0x1fffb000
[ 0.000000] ACPI: FADT (v001 HP HWPC22E 0x42302e31 MSFT 0x31313031) @ 0x1fffb11b
[ 0.000000] ACPI: BOOT (v001 HP HWPC22E 0x42302e31 MSFT 0x31313031) @ 0x1fffb034
[ 0.000000] ACPI: SPCR (v001 HP HWPC22E 0x42302e31 MSFT 0x31313031) @ 0x1fffb05c
[ 0.000000] ACPI: MADT (v001 HP HWPC22E 0x42302e31 MSFT 0x31313031) @ 0x1fffb0a9
[ 0.000000] ACPI: DSDT (v001 HP HWPC22E 0x00001000 MSFT 0x0100000b) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32])
[ 0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 3 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 2666.174 MHz processor.
[ 281.876971] Built 1 zonelists. Total pages: 130044
[ 281.876977] Kernel command line: root=UUID=5c383298-138f-4991-a777-c65da7e914d3 ro quiet splash locale=pl_PL
[ 281.877150] mapped APIC to ffffd000 (fee00000)
[ 281.877153] mapped IOAPIC to ffffc000 (fec00000)
[ 281.877155] mapped IOAPIC to ffffb000 (fec01000)
[ 281.877158] mapped IOAPIC to ffffa000 (fec02000)
[ 281.877161] Enabling fast FPU save and restore... done.
[ 281.877165] Enabling unmasked SIMD FPU exception support... done.
[ 281.877179] Initializing CPU#0
[ 281.877281] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 281.879316] Console: colour VGA+ 80x25
[ 281.879698] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 281.880048] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 281.890679] Memory: 508728k/524268k available (1993k kernel code, 14980k reserved, 900k data, 328k init, 0k highmem)
[ 281.890690] virtual kernel memory layout:
[ 281.890691] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 281.890692] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 281.890693] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 281.890694] lowmem : 0xc0000000 - 0xdfffb000 ( 511 MB)
[ 281.890695] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 281.890696] .data : 0xc02f24c9 - 0xc03d36d4 ( 900 kB)
[ 281.890697] .text : 0xc0100000 - 0xc02f24c9 (1993 kB)
[ 281.890700] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 281.969265] Calibrating delay using timer specific routine.. 5335.77 BogoMIPS (lpj=10671547)
[ 281.969311] Security Framework v1.0.0 initialized
[ 281.969319] SELinux: Disabled at boot.
[ 281.969336] Mount-cache hash table entries: 512
[ 281.969499] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[ 281.969512] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 281.969515] CPU: L2 cache: 512K
[ 281.969517] CPU: Hyper-Threading is disabled
[ 281.969520] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000
[ 281.969531] Compat vDSO mapped to ffffe000.
[ 281.969535] Remapping vsyscall page to ffffe000
[ 281.969549] Checking 'hlt' instruction... OK.
[ 281.985362] SMP alternatives: switching to UP code
[ 281.985583] Freeing SMP alternatives: 11k freed
[ 281.985806] Early unpacking initramfs... done
[ 282.276677] ACPI: Core revision 20060707
[ 282.277523] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 282.279233] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09
[ 282.279278] Total of 1 processors activated (5335.77 BogoMIPS).
[ 282.279707] ENABLING IO-APIC IRQs
[ 282.279910] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 282.319621] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 282.319676] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 282.319679] ...trying to set up timer as Virtual Wire IRQ... works.
[ 282.465208] Brought up 1 CPUs
[ 282.465489] Booting paravirtualized kernel on bare hardware
[ 282.465578] Time: 14:33:52 Date: 02/19/108
[ 282.465613] NET: Registered protocol family 16
[ 282.465719] EISA bus registered
[ 282.465725] ACPI: bus type pci registered
[ 282.467173] PCI: PCI BIOS revision 2.10 entry at 0xf17b0, last bus=0
[ 282.467176] PCI: Using configuration type 1
[ 282.467177] Setting up standard PCI resources
[ 282.477044] ACPI: Interpreter enabled
[ 282.477049] ACPI: Using IOAPIC for interrupt routing
[ 282.477681] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.477902] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0
[ 282.478116] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 282.478329] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 282.478545] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.478760] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.478974] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.479194] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.479410] ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.479623] ACPI: PCI Interrupt Link [LNKJ] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.479840] ACPI: PCI Interrupt Link [LNKK] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.480057] ACPI: PCI Interrupt Link [LNKL] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.480271] ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.480486] ACPI: PCI Interrupt Link [LNKN] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.480701] ACPI: PCI Interrupt Link [LNKO] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.480917] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.481133] ACPI: PCI Interrupt Link [LNKQ] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.481359] ACPI: PCI Interrupt Link [LNKR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.481573] ACPI: PCI Interrupt Link [LNKS] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.481800] ACPI: PCI Interrupt Link [LNKT] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.482018] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.482234] ACPI: PCI Interrupt Link [LNKV] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.482452] ACPI: PCI Interrupt Link [LNKW] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.482669] ACPI: PCI Interrupt Link [LNKX] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.482887] ACPI: PCI Interrupt Link [LNKY] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.483103] ACPI: PCI Interrupt Link [LNKZ] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.483318] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.483533] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.483751] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.483968] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 282.484182] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[ 282.484397] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 10 11 12 14 15) *0
[ 282.484515] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 282.484522] PCI: Probing PCI hardware (bus 00)
[ 282.486741] Boot video device is 0000:00:09.0
[ 282.486934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 282.490176] ACPI: Power Resource [FDDP] (off)
[ 282.490239] ACPI: Power Resource [LPTP] (off)
[ 282.490302] ACPI: Power Resource [URP1] (off)
[ 282.490370] ACPI: Power Resource [URP2] (off)
[ 282.490755] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 282.490773] pnp: PnP ACPI init
[ 282.495231] pnp: PnP ACPI: found 13 devices
[ 282.495236] PnPBIOS: Disabled by ACPI PNP
[ 282.495295] PCI: Using ACPI for IRQ routing
[ 282.495301] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 282.497672] NET: Registered protocol family 8
[ 282.497674] NET: Registered protocol family 20
[ 282.497919] pnp: 00:08: ioport range 0xeb00-0xeb7f could not be reserved
[ 282.497927] pnp: 00:0c: ioport range 0x540-0x54f has been reserved
[ 282.497929] pnp: 00:0c: ioport range 0x5a0-0x5bf has been reserved
[ 282.497932] pnp: 00:0c: ioport range 0xc20-0xc30 has been reserved
[ 282.497934] pnp: 00:0c: ioport range 0xc80-0xc9f has been reserved
[ 282.497937] pnp: 00:0c: ioport range 0x1200-0x122f has been reserved
[ 282.497939] pnp: 00:0c: ioport range 0xc00-0xc01 has been reserved
[ 282.497942] pnp: 00:0c: ioport range 0xc06-0xc08 has been reserved
[ 282.497944] pnp: 00:0c: ioport range 0xc14-0xc14 has been reserved
[ 282.498285] NET: Registered protocol family 2
[ 282.537242] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 282.537338] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 282.537435] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 282.537488] TCP: Hash tables configured (established 16384 bind 8192)
[ 282.537491] TCP reno registered
[ 282.549281] checking if image is initramfs... it is
[ 283.123339] Freeing initrd memory: 6786k freed
[ 283.123603] Simple Boot Flag at 0x3a set to 0x1
[ 283.123911] audit: initializing netlink socket (disabled)
[ 283.123928] audit(1205937233.288:1): initialized
[ 283.124076] VFS: Disk quotas dquot_6.5.1
[ 283.124098] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 283.124155] io scheduler noop registered
[ 283.124159] io scheduler anticipatory registered
[ 283.124161] io scheduler deadline registered
[ 283.124170] io scheduler cfq registered (default)
[ 283.124180] PCI: MSI quirk detected. MSI deactivated.
[ 283.124184] PCI: MSI quirk detected. MSI deactivated.
[ 283.137255] isapnp: Scanning for PnP cards...
[ 283.491270] isapnp: No Plug & Play device found
[ 283.518355] Real Time Clock Driver v1.12ac
[ 283.518412] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 283.518535] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 283.519315] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 283.519656] mice: PS/2 mouse device common for all mice
[ 283.520293] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 283.520575] input: Macintosh mouse button emulation as /class/input/input0
[ 283.520616] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 283.520621] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 283.520891] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 283.524370] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 283.524376] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 283.524500] EISA: Probing bus 0 at eisa.0
[ 283.524505] EISA: Cannot allocate resource for mainboard
[ 283.524535] EISA: Detected 0 cards.
[ 283.554648] TCP cubic registered
[ 283.554655] NET: Registered protocol family 1
[ 283.554682] Using IPI No-Shortcut mode
[ 283.554760] ACPI: (supports S0 S1 S4 S5)
[ 283.554812] Magic number: 0:921:586
[ 283.554911] hash matches device ptyc4
[ 283.555383] Freeing unused kernel memory: 328k freed
[ 283.556907] Time: tsc clocksource has been installed.
[ 283.574967] input: AT Translated Set 2 keyboard as /class/input/input1
[ 284.795742] Capability LSM initialized
[ 285.347367] tg3.c:v3.72.1 (January 8, 2007)
[ 285.347402] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 285.361059] SCSI subsystem initialized
[ 285.407685] usbcore: registered new interface driver usbfs
[ 285.407714] usbcore: registered new interface driver hub
[ 285.407739] usbcore: registered new device driver usb
[ 285.408655] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 285.444861] eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:08:02:f7:bf:69
[ 285.444870] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[ 285.444873] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 285.445028] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 285.697517] Floppy drive(s): fd0 is 1.44M
[ 285.772420] FDC 0 is a National Semiconductor PC87306
[ 300.669730] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 300.669734] <Adaptec (Compaq OEM) 29160 Ultra160 SCSI adapter>
[ 300.669735] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 300.669736]
[ 300.673035] scsi 0:0:0:0: Direct-Access COMPAQ BD03695CC8 HPB6 PQ: 0 ANSI: 3
[ 300.673050] scsi0:A:0:0: Tagged Queuing enabled. Depth 8
[ 300.673065] target0:0:0: Beginning Domain Validation
[ 300.678636] libata version 2.20 loaded.
[ 300.682010] target0:0:0: wide asynchronous
[ 300.684504] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001a800 irq 14
[ 300.684540] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001a808 irq 15
[ 300.684561] scsi1 : pata_serverworks
[ 300.685636] target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 300.692463] target0:0:0: Ending Domain Validation
[ 300.694741] scsi 0:0:1:0: Direct-Access COMPAQ BD03695A27 HPB4 PQ: 0 ANSI: 3
[ 300.694754] scsi0:A:1:0: Tagged Queuing enabled. Depth 8
[ 300.694766] target0:0:1: Beginning Domain Validation
[ 300.697681] target0:0:1: wide asynchronous
[ 300.699901] target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 300.704806] target0:0:1: Ending Domain Validation
[ 300.841737] scsi2 : pata_serverworks
[ 301.161887] ata2.00: ATAPI, max UDMA/25
[ 301.325864] ata2.00: configured for UDMA/25
[ 301.325914] scsi: waiting for bus probes to complete ...
[ 304.050952] scsi 2:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8482B 2.05 PQ: 0 ANSI: 5
[ 304.051750] ACPI: PCI Interrupt Link [LNK5] BIOS reported IRQ 0, using IRQ 11
[ 304.051754] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
[ 304.051764] ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
[ 304.051780] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[ 304.052100] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
[ 304.052122] ohci_hcd 0000:00:0f.2: irq 11, io mem 0xfb000000
[ 304.052946] SCSI device sda: 71132000 512-byte hdwr sectors (36420 MB)
[ 304.054903] sda: Write Protect is off
[ 304.054909] sda: Mode Sense: cf 00 10 08
[ 304.056037] SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA
[ 304.056541] SCSI device sda: 71132000 512-byte hdwr sectors (36420 MB)
[ 304.058501] sda: Write Protect is off
[ 304.058505] sda: Mode Sense: cf 00 10 08
[ 304.060036] SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA
[ 304.060043] sda:<6>sda: Current: sense key: Recovered Error
[ 304.067041] Additional sense: Servo impending failure drive error rate too high
[ 304.067096] sda1 sda2
[ 304.107193] usb usb1: configuration #1 chosen from 1 choice
[ 304.107224] hub 1-0:1.0: USB hub found
[ 304.107237] hub 1-0:1.0: 4 ports detected
[ 304.218983] sd 0:0:0:0: Attached scsi disk sda
[ 304.219520] SCSI device sdb: 71132000 512-byte hdwr sectors (36420 MB)
[ 304.220751] sdb: Write Protect is off
[ 304.220755] sdb: Mode Sense: d3 00 10 08
[ 304.222261] SCSI device sdb: write cache: disabled, read cache: enabled, supports DPO and FUA
[ 304.222823] SCSI device sdb: 71132000 512-byte hdwr sectors (36420 MB)
[ 304.224038] sdb: Write Protect is off
[ 304.224041] sdb: Mode Sense: d3 00 10 08
[ 304.225481] SCSI device sdb: write cache: disabled, read cache: enabled, supports DPO and FUA
[ 304.225486] sdb: sdb1
[ 304.236508] sd 0:0:1:0: Attached scsi disk sdb
[ 304.241148] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 304.241176] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 304.241196] scsi 2:0:0:0: Attached scsi generic sg2 type 5
[ 304.253768] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 304.253775] Uniform CD-ROM driver Revision: 3.20
[ 304.253844] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 304.456560] Attempting manual resume
[ 304.456565] swsusp: Resume From Partition 8:2
[ 304.456567] PM: Checking swsusp image.
[ 304.456861] PM: Resume from disk failed.
[ 304.494353] kjournald starting. Commit interval 5 seconds
[ 304.494368] EXT3-fs: mounted filesystem with ordered data mode.
[ 304.932914] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 305.152710] usb 1-1: configuration #1 chosen from 1 choice
[ 311.664723] PM: Writing back config space on device 0000:00:03.0 at offset b (was 164714e4, writing bb0e11)
[ 311.664739] PM: Writing back config space on device 0000:00:03.0 at offset 3 (was 0, writing 4008)
[ 311.664745] PM: Writing back config space on device 0000:00:03.0 at offset 2 (was 2000000, writing 2000002)
[ 311.664750] PM: Writing back config space on device 0000:00:03.0 at offset 1 (was 2b00000, writing 2b00006)
[ 311.664756] PM: Writing back config space on device 0000:00:03.0 at offset 0 (was 164714e4, writing 16a614e4)
[ 312.000792] NET: Registered protocol family 10
[ 312.000890] lo: Disabled Privacy Extensions
[ 312.000945] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 313.265511] Linux agpgart interface v0.102 (c) Dave Jones
[ 313.337243] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 313.337248] tg3: eth0: Flow control is on for TX and on for RX.
[ 313.338443] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 313.629301] piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
[ 313.782515] parport: PnPBIOS parport detected.
[ 313.782621] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 313.799802] input: PC Speaker as /class/input/input2
[ 313.956879] usbcore: registered new interface driver libusual
[ 314.063284] eth0: duplicate address detected!
[ 314.070813] Initializing USB Mass Storage driver...
[ 314.070885] scsi3 : SCSI emulation for USB Mass Storage devices
[ 314.070946] usbcore: registered new interface driver usb-storage
[ 314.070950] USB Mass Storage support registered.
[ 314.071085] usb-storage: device found at 2
[ 314.071087] usb-storage: waiting for device to settle before scanning
[ 314.404283] input: PS/2 Generic Mouse as /class/input/input3
[ 314.580585] fuse init (API version 7.8)
[ 314.599948] lp0: using parport0 (interrupt-driven).
[ 314.632816] Adding 650624k swap on /dev/disk/by-uuid/0c2d52b3-2f82-4195-823f-78566e3aeebb. Priority:-1 extents:1 across:650624k
[ 314.767495] EXT3 FS on sda1, internal journal
[ 314.929407] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 316.239721] NET: Registered protocol family 17
[ 319.071556] usb-storage: device scan complete
[ 319.078553] scsi 3:0:0:0: Direct-Access CREATIVE Zen Nano Plus 1123 PQ: 0 ANSI: 4
[ 319.089524] SCSI device sdc: 236416 2048-byte hdwr sectors (484 MB)
[ 319.096516] sdc: Write Protect is off
[ 319.096519] sdc: Mode Sense: 38 00 00 00
[ 319.096521] sdc: assuming drive cache: write through
[ 319.115508] SCSI device sdc: 236416 2048-byte hdwr sectors (484 MB)
[ 319.122504] sdc: Write Protect is off
[ 319.122507] sdc: Mode Sense: 38 00 00 00
[ 319.122508] sdc: assuming drive cache: write through
[ 319.122512] sdc: sdc1
[ 319.136540] sd 3:0:0:0: Attached scsi removable disk sdc
[ 319.136584] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 320.248545] Using specific hotkey driver
[ 320.306303] input: Power Button (FF) as /class/input/input4
[ 320.310990] ACPI: Power Button (FF) [PWRF]
[ 320.339688] input: Power Button (CM) as /class/input/input5
[ 320.344398] ACPI: Power Button (CM) [PWRB]
[ 320.359783] ibm_acpi: ec object not found
[ 320.388428] No dock devices found.
[ 320.490131] pcc_acpi: loading...
[ 325.159066] ppdev: user-space parallel port driver
[ 325.951847] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 325.951853] apm: overridden by ACPI.
[ 326.442001] Bluetooth: Core ver 2.11
[ 326.442074] NET: Registered protocol family 31
[ 326.442077] Bluetooth: HCI device and connection manager initialized
[ 326.442081] Bluetooth: HCI socket layer initialized
[ 326.510181] Bluetooth: L2CAP ver 2.8
[ 326.510186] Bluetooth: L2CAP socket layer initialized
[ 326.519479] Bluetooth: RFCOMM socket layer initialized
[ 326.519494] Bluetooth: RFCOMM TTY layer initialized
[ 326.519496] Bluetooth: RFCOMM ver 1.8
[ 1900.669364] kjournald starting. Commit interval 5 seconds
[ 1900.674916] EXT3 FS on sdb1, internal journal
[ 1900.675082] EXT3-fs: mounted filesystem with ordered data mode.
// Urzadzenia wszystkie
lshw
root@alien:/home/alien# lshw
alien
description: Mini Tower Computer
product: HP Server
vendor: Hewlett-Packard
version: TC2120
serial: Chassis Serial Number
width: 32 bits
capabilities: smbios-2.3 dmi-2.3
configuration: boot=normal chassis=mini-tower uuid=0314903A-1186-0001-3110-000802F7BF69
*-core
description: Motherboard
physical id: 0
*-firmware
description: BIOS
vendor: Award Software, Inc.
physical id: 0
version: 6.00.23 RV (09/08/2003) (09/08/2003)
size: 64KB
capacity: 448KB
capabilities: pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi biosbootspecification
*-cpu
description: CPU
product: Intel(R) Pentium(R) 4 CPU 2.66GHz
vendor: Intel Corp.
physical id: 3
bus info: cpu@0
version: 15.2.9
slot: Primary CPU
size: 2667MHz
capacity: 3400MHz
width: 32 bits
clock: 133MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up cid xtpr
configuration: id=0
*-cache:0
description: L1 cache
physical id: 9
slot: L1 Cache
size: 8KB
capacity: 32KB
capabilities: pipeline-burst synchronous internal varies unified
*-cache:1
description: L2 cache
physical id: a
slot: L2 Cache
size: 512KB
capacity: 512KB
capabilities: pipeline-burst synchronous internal varies unified
*-memory
description: System Memory
physical id: 1e
slot: System board or motherboard
size: 512MB
capacity: 512MB
*-bank:0
description: DIMM DRAM Synchronous [empty]
physical id: 0
slot: DIMM1
*-bank:1
description: DIMM DRAM Synchronous [empty]
physical id: 1
slot: DIMM2
*-bank:2
description: DIMM DRAM Synchronous
physical id: 2
slot: DIMM3
size: 256MB
width: 64 bits
*-bank:3
description: DIMM DRAM Synchronous
physical id: 3
slot: DIMM4
size: 256MB
width: 64 bits
*-pci:0
description: Host bridge
product: GCNB-LE Host Bridge
vendor: Broadcom
physical id: 100
bus info: pci@00:00.0
version: 32
width: 32 bits
clock: 33MHz
*-network
description: Ethernet interface
product: NetXtreme BCM5702X Gigabit Ethernet
vendor: Broadcom Corporation
physical id: 3
bus info: pci@00:03.0
logical name: eth0
version: 02
serial: 00:08:02:f7:bf:69
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 66MHz
capabilities: bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.72.1 duplex=full firmware=5702-v2.24a ip=192.168.3.252 latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100MB/s
resources: iomemory:fe000000-fe00ffff irq:16
*-scsi
description: SCSI storage controller
product: AIC-7892A U160/m
vendor: Adaptec
physical id: 4
bus info: pci@00:04.0
logical name: scsi0
version: 02
width: 64 bits
clock: 66MHz
capabilities: scsi bus_master cap_list scsi-host
configuration: driver=aic7xxx latency=32 maxlatency=25 mingnt=40
resources: iomemory:fd800000-fd800fff irq:17
*-disk:0
description: SCSI Disk
product: BD03695CC8
vendor: COMPAQ
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: HPB6
serial: UPS1P3A02AGN0341
size: 33GB
capacity: 42GB
capabilities: 10000rpm partitioned partitioned:dos
configuration: ansiversion=3
*-volume:0
description: Linux filesystem partition
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
capacity: 33GB
capabilities: primary
*-volume:1
description: Linux swap / Solaris partition
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
capacity: 635MB
capabilities: primary nofs
*-disk:1
description: SCSI Disk
product: BD03695A27
vendor: COMPAQ
physical id: 0.1.0
bus info: scsi@0:0.1.0
logical name: /dev/sdb
version: HPB4
serial: 3JA66QAY00007412R69P
size: 33GB
capacity: 34GB
capabilities: 10000rpm partitioned partitioned:dos
configuration: ansiversion=3
*-volume
description: Linux filesystem partition
physical id: 1
bus info: scsi@0:0.1.0,1
logical name: /dev/sdb1
capacity: 33GB
capabilities: primary
*-display
description: VGA compatible controller
product: Rage XL
vendor: ATI Technologies Inc
physical id: 9
bus info: pci@00:09.0
version: 27
size: 16MB
width: 32 bits
clock: 33MHz
capabilities: vga bus_master cap_list
configuration: latency=32 mingnt=8
resources: iomemory:fc000000-fcffffff ioport:d400-d4ff iomemory:fb800000-fb800fff irq:10
*-isa
description: ISA bridge
product: CSB6 South Bridge
vendor: Broadcom
physical id: f
bus info: pci@00:0f.0
version: a0
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: driver=piix4_smbus latency=32
*-ide
description: IDE interface
product: CSB6 RAID/IDE Controller
vendor: Broadcom
physical id: f.1
bus info: pci@00:0f.1
logical name: scsi2
logical name: scsi1
version: a0
width: 32 bits
clock: 33MHz
capabilities: ide bus_master emulated scsi-host
configuration: driver=pata_serverworks latency=64
resources: ioport:1f0-1f7 ioport:3f4-3f3 ioport:170-177 ioport:374-373 ioport:a800-a80f
*-cdrom
description: SCSI CD-ROM
product: CD-ROM GCR-8482B
vendor: HL-DT-ST
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/cdrom
logical name: /dev/scd0
logical name: /dev/sr0
version: 2.05
serial: HL-DT-STCD-ROM GCR-8482B2.05
capabilities: removable audio
configuration: ansiversion=5
*-disc
physical id: 0
logical name: /dev/cdrom
*-usb
description: USB Controller
product: CSB6 OHCI USB Controller
vendor: Broadcom
physical id: f.2
bus info: pci@00:0f.2
version: 05
width: 32 bits
clock: 33MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=32 maxlatency=80
resources: iomemory:fb000000-fb000fff irq:11
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.20-16-generic ohci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=4 speed=12.0MB/s
*-usb
description: Mass storage device
product: Zen Nano Plus
vendor: CREATIVE
physical id: 1
bus info: usb@1:1
logical name: scsi3
version: 11.23
serial: 0002F9D1E21E450F
capabilities: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=100mA speed=12.0MB/s
*-disk
description: SCSI Disk
product: Zen Nano Plus
vendor: CREATIVE
physical id: 0.0.0
bus info: scsi@3:0.0.0
logical name: /dev/sdc
version: 1123
serial: 0002F9D1E21E450F
size: 461MB
capabilities: removable
configuration: ansiversion=4
*-disc
physical id: 0
logical name: /dev/sdc
size: 461MB
capabilities: partitioned partitioned:dos
*-volume UNCLAIMED
description: FAT16 partition
physical id: 1
capacity: 115MB
capabilities: primary bootable
*-pci:1
description: Host bridge
product: GCNB-LE Host Bridge
vendor: Broadcom
physical id: 101
bus info: pci@00:00.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:2
description: Host bridge
product: GCLE-2 Host Bridge
vendor: Broadcom
physical id: 102
bus info: pci@00:0f.3
version: 00
width: 32 bits
clock: 33MHz