rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe70000 (usable)
[ 0.000000] BIOS-e820: 000000007fe70000 - 000000007ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7d10
[ 0.000000] Entering add_active_range(0, 0, 523888) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 523888
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 523888
[ 0.000000] On node 0 totalpages: 523888
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2300 pages used for memmap
[ 0.000000] HighMem zone: 292212 pages, LIFO batch:31
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7C60 checksum 0
[ 0.000000] ACPI: RSDP 000F7C60, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 7FE7C582, 007C (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7FE84D6E, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 7FE7D83A, 74C0 (r1 HP 30BC 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 7FE85FC0, 0040
[ 0.000000] ACPI: APIC 7FE84E62, 0068 (r1 HP 30BC 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 7FE84ECA, 0038 (r1 HP 30BC 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 7FE84F02, 003C (r1 HP 30BC 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA 7FE84F3E, 0032 (r1 HP 30BB 6040000 PTL 1)
[ 0.000000] ACPI: APIC 7FE84F70, 0068 (r1 HP 30BC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7FE84FD8, 0028 (r1 HP 30BC 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 7FE7D630, 020A (r1 HP 30BC 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7FE7CB8A, 025F (r1 HP 30BC 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7FE7CAE4, 00A6 (r1 HP 30BC 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7FE7C5FE, 04E6 (r1 HP 30BC 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Built 1 zonelists. Total pages: 519796
[ 0.000000] Kernel command line: root=UUID=74395223-2d04-42c6-8638-095ee1571907 ro quiet splash locale=fr_FR
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.613 MHz processor.
[ 16.509158] Console: colour VGA+ 80x25
[ 16.509479] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 16.509807] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.607733] Memory: 2065840k/2095552k available (2015k kernel code, 28464k reserved, 916k data, 364k init, 1178048k highmem)
[ 16.607742] virtual kernel memory layout:
[ 16.607743] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 16.607745] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.607746] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 16.607747] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 16.607748] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 16.607749] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 16.607751] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 16.607754] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.607794] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 16.607952] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 16.607957] hpet0: 3 64-bit timers, 14318180 Hz
[ 16.688927] Calibrating delay using timer specific routine.. 3196.66 BogoMIPS (lpj=6393334)
[ 16.688952] Security Framework v1.0.0 initialized
[ 16.688959] SELinux: Disabled at boot.
[ 16.688972] Mount-cache hash table entries: 512
[ 16.689113] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 16.689121] monitor/mwait feature present.
[ 16.689123] using mwait in idle threads.
[ 16.689128] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 16.689131] CPU: L2 cache: 2048K
[ 16.689134] CPU: Physical Processor ID: 0
[ 16.689136] CPU: Processor Core ID: 0
[ 16.689138] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 16.689148] Compat vDSO mapped to ffffe000.
[ 16.689162] Checking 'hlt' instruction... OK.
[ 16.705038] SMP alternatives: switching to UP code
[ 16.705514] Early unpacking initramfs... done
[ 17.063172] ACPI: Core revision 20070126
[ 17.063225] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.069616] CPU0: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06
[ 17.069633] SMP alternatives: switching to SMP code
[ 17.069718] Booting processor 1/1 eip 3000
[ 17.079988] Initializing CPU#1
[ 17.156618] Calibrating delay using timer specific routine.. 3227.40 BogoMIPS (lpj=6454809)
[ 17.156624] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 17.156630] monitor/mwait feature present.
[ 17.156633] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 17.156635] CPU: L2 cache: 2048K
[ 17.156637] CPU: Physical Processor ID: 0
[ 17.156638] CPU: Processor Core ID: 1
[ 17.156640] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 17.157268] CPU1: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06
[ 17.157294] Total of 2 processors activated (6424.07 BogoMIPS).
[ 17.157492] ENABLING IO-APIC IRQs
[ 17.157697] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 17.304617] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 17.324622] Brought up 2 CPUs
[ 17.467700] migration_cost=70
[ 17.467843] Booting paravirtualized kernel on bare hardware
[ 17.467932] Time: 21:59:04 Date: 02/18/108
[ 17.467952] NET: Registered protocol family 16
[ 17.468036] EISA bus registered
[ 17.468041] ACPI: bus type pci registered
[ 17.468166] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=7
[ 17.468168] PCI: Using configuration type 1
[ 17.468170] Setting up standard PCI resources
[ 17.470699] ACPI: EC: Look up EC in DSDT
[ 17.471719] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 17.473232] ACPI: System BIOS is requesting _OSI(Linux)
[ 17.473235] ACPI: Please test with "acpi_osi=!Linux"
[ 17.473236] Please send dmidecode to linux-acpi@vger.kernel.org
[ 17.473712] ACPI: Interpreter enabled
[ 17.473716] ACPI: (supports S0 S3 S4 S5)
[ 17.473733] ACPI: Using IOAPIC for interrupt routing
[ 17.480666] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 17.480727] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.480742] PCI: Probing PCI hardware (bus 00)
[ 17.481498] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 17.481503] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 17.483051] PCI: Transparent bridge - 0000:00:1e.0
[ 17.483146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.483437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 17.483574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 17.483700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 17.483824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 17.483961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 17.490717] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 17.490846] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
[ 17.490973] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
[ 17.491098] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
[ 17.491223] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[ 17.491349] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[ 17.491478] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[ 17.491604] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
[ 17.491734] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.491744] pnp: PnP ACPI init
[ 17.491751] ACPI: bus type pnp registered
[ 17.494225] pnp: PnP ACPI: found 11 devices
[ 17.494227] ACPI: ACPI bus type pnp unregistered
[ 17.494231] PnPBIOS: Disabled by ACPI PNP
[ 17.494276] PCI: Using ACPI for IRQ routing
[ 17.494279] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.524862] NET: Registered protocol family 8
[ 17.524864] NET: Registered protocol family 20
[ 17.524931] pnp: 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
[ 17.524938] pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
[ 17.524941] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 17.524945] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 17.524948] pnp: 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 17.524955] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 17.524962] pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
[ 17.524965] pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 17.528380] Time: tsc clocksource has been installed.
[ 17.528394] Switched to high resolution mode on CPU 0
[ 17.528482] Switched to high resolution mode on CPU 1
[ 17.555304] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[ 17.555371] PCI: Bridge: 0000:00:01.0
[ 17.555372] IO window: disabled.
[ 17.555377] MEM window: dc000000-ddffffff
[ 17.555380] PREFETCH window: c0000000-cfffffff
[ 17.555385] PCI: Bridge: 0000:00:1c.0
[ 17.555388] IO window: 2000-2fff
[ 17.555394] MEM window: d8000000-d9ffffff
[ 17.555400] PREFETCH window: d2000000-d3ffffff
[ 17.555406] PCI: Bridge: 0000:00:1c.1
[ 17.555409] IO window: 3000-3fff
[ 17.555416] MEM window: d6000000-d7ffffff
[ 17.555421] PREFETCH window: d0000000-d1ffffff
[ 17.555428] PCI: Bridge: 0000:00:1c.2
[ 17.555431] IO window: 4000-4fff
[ 17.555437] MEM window: da000000-dbffffff
[ 17.555442] PREFETCH window: d4000000-d5ffffff
[ 17.555449] PCI: Bridge: 0000:00:1e.0
[ 17.555451] IO window: disabled.
[ 17.555457] MEM window: de000000-de0fffff
[ 17.555462] PREFETCH window: disabled.
[ 17.555479] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.555485] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 17.555511] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 17.555517] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 17.555542] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 17.555548] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 17.555574] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 17.555580] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 17.555592] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
[ 17.555599] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 17.555611] NET: Registered protocol family 2
[ 17.600320] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.600384] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 17.601153] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 17.601437] TCP: Hash tables configured (established 131072 bind 65536)
[ 17.601440] TCP reno registered
[ 17.616460] checking if image is initramfs... it is
[ 18.320501] Freeing initrd memory: 7342k freed
[ 18.320626] Simple Boot Flag at 0x35 set to 0x1
[ 18.321152] audit: initializing netlink socket (disabled)
[ 18.321171] audit(1205877544.296:1): initialized
[ 18.321283] highmem bounce pool size: 64 pages
[ 18.323273] VFS: Disk quotas dquot_6.5.1
[ 18.323325] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.323424] io scheduler noop registered
[ 18.323426] io scheduler anticipatory registered
[ 18.323428] io scheduler deadline registered
[ 18.323443] io scheduler cfq registered (default)
[ 18.323552] Boot video device is 0000:01:00.0
[ 18.323643] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 18.323687] assign_interrupt_mode Found MSI capability
[ 18.323690] Allocate Port Service[0000:00:01.0:pcie00]
[ 18.323778] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 18.323841] assign_interrupt_mode Found MSI capability
[ 18.323843] Allocate Port Service[0000:00:1c.0:pcie00]
[ 18.323883] Allocate Port Service[0000:00:1c.0:pcie02]
[ 18.323988] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 18.324051] assign_interrupt_mode Found MSI capability
[ 18.324053] Allocate Port Service[0000:00:1c.1:pcie00]
[ 18.324088] Allocate Port Service[0000:00:1c.1:pcie02]
[ 18.324195] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 18.324258] assign_interrupt_mode Found MSI capability
[ 18.324260] Allocate Port Service[0000:00:1c.2:pcie00]
[ 18.324293] Allocate Port Service[0000:00:1c.2:pcie02]
[ 18.324468] isapnp: Scanning for PnP cards...
[ 18.681906] isapnp: No Plug & Play device found
[ 18.703204] Real Time Clock Driver v1.12ac
[ 18.703454] hpet_resources: 0xfed00000 is busy
[ 18.703485] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.704634] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.704863] input: Macintosh mouse button emulation as /class/input/input0
[ 18.704944] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.721494] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.721499] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.721656] mice: PS/2 mouse device common for all mice
[ 18.722504] EISA: Probing bus 0 at eisa.0
[ 18.722512] Cannot allocate resource for EISA slot 1
[ 18.722516] Cannot allocate resource for EISA slot 2
[ 18.722518] Cannot allocate resource for EISA slot 3
[ 18.722521] Cannot allocate resource for EISA slot 4
[ 18.722540] EISA: Detected 0 cards.
[ 18.722641] TCP cubic registered
[ 18.722656] NET: Registered protocol family 1
[ 18.722679] Using IPI No-Shortcut mode
[ 18.722847] Magic number: 0:6:1006
[ 18.722853] hash matches device ttye5
[ 18.722946] hash matches device 00:08
[ 18.723166] Freeing unused kernel memory: 364k freed
[ 18.734203] input: AT Translated Set 2 keyboard as /class/input/input1
[ 19.932439] AppArmor: AppArmor initialized<5>audit(1205877545.796:2): type=1505 info="AppArmor initialized" pid=1244
[ 19.938494] fuse init (API version 7.8)
[ 19.943076] Failure registering capabilities with primary security module.
[ 19.983512] ACPI: SSDT 7FE7D330, 0238 (r1 HP 30BC 3000 INTL 20050624)
[ 19.983737] ACPI: SSDT 7FE7CDE9, 04C2 (r1 HP 30BC 3001 INTL 20050624)
[ 19.984226] Monitor-Mwait will be used to enter C-1 state
[ 19.984230] Monitor-Mwait will be used to enter C-2 state
[ 19.984233] Monitor-Mwait will be used to enter C-3 state
[ 19.984238] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 19.984243] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 19.984509] ACPI: SSDT 7FE7D568, 00C8 (r1 HP 30BC 3000 INTL 20050624)
[ 19.984719] ACPI: SSDT 7FE7D2AB, 0085 (r1 HP 30BC 3000 INTL 20050624)
[ 19.985235] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 19.985240] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.252000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.256000] Time: hpet clocksource has been installed.
[ 3.256000] ACPI: Thermal Zone [THR1] (44 C)
[ 3.752000] usbcore: registered new interface driver usbfs
[ 3.752000] usbcore: registered new interface driver hub
[ 3.752000] usbcore: registered new device driver usb
[ 3.756000] USB Universal Host Controller Interface driver v3.0
[ 3.756000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.756000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.756000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.756000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.756000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[ 3.756000] usb usb1: configuration #1 chosen from 1 choice
[ 3.756000] hub 1-0:1.0: USB hub found
[ 3.756000] hub 1-0:1.0: 2 ports detected
[ 3.776000] SCSI subsystem initialized
[ 3.780000] libata version 2.21 loaded.
[ 3.804000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 3.804000] Copyright (c) 1999-2006 Intel Corporation.
[ 3.860000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 3.860000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.860000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.860000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.860000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[ 3.860000] usb usb2: configuration #1 chosen from 1 choice
[ 3.860000] hub 2-0:1.0: USB hub found
[ 3.860000] hub 2-0:1.0: 2 ports detected
[ 3.964000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.964000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.964000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.964000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.964000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 3.964000] usb usb3: configuration #1 chosen from 1 choice
[ 3.964000] hub 3-0:1.0: USB hub found
[ 3.964000] hub 3-0:1.0: 2 ports detected
[ 4.000000] Clocksource tsc unstable (delta = -65340713 ns)
[ 4.068000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 4.068000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 4.068000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.068000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 4.068000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 4.068000] usb usb4: configuration #1 chosen from 1 choice
[ 4.068000] hub 4-0:1.0: USB hub found
[ 4.068000] hub 4-0:1.0: 2 ports detected
[ 4.172000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 4.172000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.172000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.172000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.172000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.172000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.172000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xde304000
[ 4.176000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.176000] usb usb5: configuration #1 chosen from 1 choice
[ 4.176000] hub 5-0:1.0: USB hub found
[ 4.176000] hub 5-0:1.0: 8 ports detected
[ 4.280000] ahci 0000:00:1f.2: version 2.2
[ 4.280000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 4.584000] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 4.720000] usb 5-4: configuration #1 chosen from 1 choice
[ 5.284000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 5.284000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 5.284000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.284000] scsi0 : ahci
[ 5.284000] scsi1 : ahci
[ 5.284000] scsi2 : ahci
[ 5.284000] scsi3 : ahci
[ 5.284000] ata1: SATA max UDMA/133 cmd 0xf8826500 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.284000] ata2: SATA max UDMA/133 cmd 0xf8826580 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.284000] ata3: SATA max UDMA/133 cmd 0xf8826600 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.284000] ata4: SATA max UDMA/133 cmd 0xf8826680 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.768000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.768000] ata1.00: ATA-7: FUJITSU MHV2120BH PL, 892C, max UDMA/100
[ 5.768000] ata1.00: 234441648 sectors, multi 16: LBA48
[ 5.768000] ata1.00: configured for UDMA/100
[ 6.176000] ata2: SATA link down (SStatus 0 SControl 0)
[ 6.488000] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.800000] ata4: SATA link down (SStatus 0 SControl 0)
[ 6.800000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B 892C PQ: 0 ANSI: 5
[ 6.800000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 6.800000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 6.804000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 6.804000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.804000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.804000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.804000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 6.804000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.804000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.804000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.804000] sda:<6>e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:36:b9:2f:63
[ 6.884000] sda1 sda2 sda3 sda4
[ 6.912000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.916000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.920000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 6.920000] ata_piix 0000:00:1f.1: version 2.11
[ 6.920000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 6.920000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 6.920000] scsi4 : ata_piix
[ 6.920000] scsi5 : ata_piix
[ 6.920000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14
[ 6.920000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15
[ 7.240000] ata5.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.05, max MWDMA2
[ 7.304000] Attempting manual resume
[ 7.304000] swsusp: Resume From Partition 8:2
[ 7.304000] PM: Checking swsusp image.
[ 7.304000] PM: Resume from disk failed.
[ 7.312000] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[ 7.312000] ReiserFS: sda3: using ordered data mode
[ 7.324000] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 7.324000] ReiserFS: sda3: checking transaction log (sda3)
[ 7.392000] ReiserFS: sda3: Using r5 hash to sort names
[ 7.412000] ata5.00: configured for MWDMA2
[ 7.412000] ata6: port disabled. ignoring.
[ 7.412000] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.05 PQ: 0 ANSI: 5
[ 7.412000] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 7.412000] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 7.412000] PCI: Setting latency timer of device 0000:07:05.0 to 64
[ 7.464000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[de000000-de0007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 8.744000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc000b1bacf00]
[ 14.308000] Linux agpgart interface v0.102 (c) Dave Jones
[ 14.468000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.468000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.664000] intel_rng: FWH not detected
[ 14.696000] iTCO_vendor_support: vendor-support=0
[ 14.712000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 14.844000] sdhci: Secure Digital Host Controller Interface driver
[ 14.844000] sdhci: Copyright(c) Pierre Ossman
[ 14.844000] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
[ 14.844000] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
[ 14.844000] ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 14.844000] PCI: Setting latency timer of device 0000:07:05.1 to 64
[ 14.844000] mmc0: SDHCI at 0xde000800 irq 17 DMA
[ 14.884000] ieee80211_crypt: registered algorithm 'NULL'
[ 14.884000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 14.884000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 14.916000] Linux video capture interface: v2.00
[ 14.940000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[ 14.940000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 14.944000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.944000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 14.956000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 14.964000] nvidia: module license 'NVIDIA' taints kernel.
[ 15.260000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.260000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 15.260000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 15.312000] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1810)
[ 15.312000] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 15.312000] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
[ 15.312000] uvcvideo: Failed to initialize the device (-5).
[ 15.312000] usbcore: registered new interface driver uvcvideo
[ 15.312000] USB Video Class driver (v0.1.0)
[ 15.332000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 15.332000] Uniform CD-ROM driver Revision: 3.20
[ 15.332000] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 15.468000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 15.528000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 15.532000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 15.532000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.608000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 15.608000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 16.784000] hda_intel: azx_get_response timeout, switching to polling mode...
[ 17.104000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 17.108000] lp: driver loaded but no devices found
[ 17.232000] Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k
[ 18.996000] NET: Registered protocol family 17
[ 25.508000] kjournald starting. Commit interval 5 seconds
[ 25.508000] EXT3 FS on sda4, internal journal
[ 25.508000] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.456000] ACPI: AC Adapter [ACAD] (on-line)
[ 26.464000] No dock devices found.
[ 26.516000] input: Power Button (FF) as /class/input/input3
[ 26.516000] ACPI: Power Button (FF) [PWRF]
[ 26.516000] input: Power Button (CM) as /class/input/input4
[ 26.516000] ACPI: Power Button (CM) [PWRB]
[ 26.516000] input: Sleep Button (CM) as /class/input/input5
[ 26.516000] ACPI: Sleep Button (CM) [SLPB]
[ 26.516000] input: Lid Switch as /class/input/input6
[ 26.516000] ACPI: Lid Switch [LID]
[ 26.716000] ACPI: Battery Slot [BAT0] (battery present)
[ 26.724000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 26.728000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 28.032000] ppdev: user-space parallel port driver
[ 28.480000] audit(1205873971.427:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5156 profile="/usr/sbin/cupsd"
[ 28.668000] apm: BIOS not found.
[ 31.988000] Failure registering capabilities with primary security module.
[ 32.420000] Bluetooth: Core ver 2.11
[ 32.420000] NET: Registered protocol family 31
[ 32.420000] Bluetooth: HCI device and connection manager initialized
[ 32.420000] Bluetooth: HCI socket layer initialized
[ 32.456000] Bluetooth: L2CAP ver 2.8
[ 32.456000] Bluetooth: L2CAP socket layer initialized
[ 32.460000] Bluetooth: RFCOMM socket layer initialized
[ 32.460000] Bluetooth: RFCOMM TTY layer initialized
[ 32.460000] Bluetooth: RFCOMM ver 1.8
[ 62.920000] NET: Registered protocol family 10
[ 62.920000] lo: Disabled Privacy Extensions
[ 62.924000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 62.924000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 221.860000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 221.860000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 221.864000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 228.972000] e1000: eth0: e1000_watchdog: NIC Link is Down
[ 233.284000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 233.284000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 233.288000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 243.876000] eth0: no IPv6 routers present
[ 411.344000] ipw3945: Error sending SCAN_ABORT_CMD: time out after 500ms.
[ 452.016000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 461.544000] e1000: eth0: e1000_watchdog: NIC Link is Down
[ 464.100000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 464.100000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 464.104000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 480.444000] eth0: no IPv6 routers present