rendered paste body[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[4294667.296000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f4bd0
[4294667.296000] On node 0 totalpages: 131056
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 126960 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 GBT ) @ 0x000f6500
[4294667.296000] ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3040
[4294667.296000] ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff30c0
[4294667.296000] ACPI: MCFG (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff6640
[4294667.296000] ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff6580
[4294667.296000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x1fff66c0
[4294667.296000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20040311) @ 0x1fff6b50
[4294667.296000] ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x408
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:4 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 15:4 APIC version 20
[4294667.296000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/sda2 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 2994.185 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.448000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294668.448000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.455000] Memory: 508596k/524224k available (1976k kernel code, 15024k reserved, 606k data, 288k init, 0k highmem)
[4294668.455000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.515000] Calibrating delay using timer specific routine.. 5989.74 BogoMIPS (lpj=2994870)
[4294668.515000] Security Framework v1.0.0 initialized
[4294668.515000] SELinux: Disabled at boot.
[4294668.515000] Mount-cache hash table entries: 512
[4294668.515000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
[4294668.515000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
[4294668.515000] monitor/mwait feature present.
[4294668.515000] using mwait in idle threads.
[4294668.515000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[4294668.515000] CPU: L2 cache: 2048K
[4294668.515000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000649d 00000000 00000000
[4294668.515000] mtrr: v2.0 (20020519)
[4294668.515000] CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[4294668.515000] Enabling fast FPU save and restore... done.
[4294668.515000] Enabling unmasked SIMD FPU exception support... done.
[4294668.515000] Checking 'hlt' instruction... OK.
[4294668.519000] checking if image is initramfs... it is
[4294669.048000] Freeing initrd memory: 6836k freed
[4294669.055000] ACPI: Looking for DSDT ... not found!
[4294669.058000] ENABLING IO-APIC IRQs
[4294669.058000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294669.169000] NET: Registered protocol family 16
[4294669.169000] EISA bus registered
[4294669.169000] ACPI: bus type pci registered
[4294669.172000] PCI: PCI BIOS revision 3.00 entry at 0xfa5d0, last bus=2
[4294669.172000] PCI: Using MMCONFIG
[4294669.172000] ACPI: Subsystem revision 20051216
[4294669.179000] ACPI: Interpreter enabled
[4294669.179000] ACPI: Using IOAPIC for interrupt routing
[4294669.180000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294669.180000] PCI: Probing PCI hardware (bus 00)
[4294669.181000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[4294669.181000] Boot video device is 0000:01:00.0
[4294669.182000] PCI: Transparent bridge - 0000:00:1e.0
[4294669.182000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294669.193000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[4294669.195000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[4294669.195000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[4294669.196000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[4294669.196000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[4294669.196000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[4294669.196000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[4294669.197000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[4294669.197000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[4294669.197000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.197000] pnp: PnP ACPI init
[4294669.200000] pnp: PnP ACPI: found 11 devices
[4294669.200000] PnPBIOS: Disabled by ACPI PNP
[4294669.200000] PCI: Using ACPI for IRQ routing
[4294669.200000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294669.218000] pnp: 00:07: ioport range 0x400-0x4bf could not be reserved
[4294669.218000] PCI: Bridge: 0000:00:01.0
[4294669.218000] IO window: 9000-9fff
[4294669.218000] MEM window: e4000000-e5ffffff
[4294669.218000] PREFETCH window: e0000000-e3ffffff
[4294669.218000] PCI: Bridge: 0000:00:1e.0
[4294669.218000] IO window: a000-afff
[4294669.218000] MEM window: e6000000-e60fffff
[4294669.218000] PREFETCH window: disabled.
[4294669.218000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294669.218000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294669.218000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294669.219000] audit: initializing netlink socket (disabled)
[4294669.219000] audit(1153485507.218:1): initialized
[4294669.219000] VFS: Disk quotas dquot_6.5.1
[4294669.219000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.219000] Initializing Cryptographic API
[4294669.219000] io scheduler noop registered
[4294669.219000] io scheduler anticipatory registered
[4294669.219000] io scheduler deadline registered
[4294669.219000] io scheduler cfq registered
[4294669.219000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294669.219000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294669.219000] assign_interrupt_mode Found MSI capability
[4294669.219000] Allocate Port Service[pcie00]
[4294669.219000] Allocate Port Service[pcie03]
[4294669.219000] isapnp: Scanning for PnP cards...
[4294669.575000] isapnp: No Plug & Play device found
[4294669.592000] PNP: No PS/2 controller found. Probing ports directly.
[4294669.603000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294669.604000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.604000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294669.604000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.607000] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.607000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 193
[4294669.607000] 0000:02:01.0: ttyS5 at I/O 0xa008 (irq = 193) is a 16450
[4294669.607000] 0000:02:01.0: ttyS6 at I/O 0xa010 (irq = 193) is a 8250
[4294669.607000] 0000:02:01.0: ttyS7 at I/O 0xa018 (irq = 193) is a 16450
[4294669.607000] 0000:02:01.0: ttyS8 at I/O 0xa020 (irq = 193) is a 8250
[4294669.607000] 0000:02:01.0: ttyS9 at I/O 0xa028 (irq = 193) is a 8250
[4294669.608000] 0000:02:01.0: ttyS16 at I/O 0xa060 (irq = 193) is a 8250
[4294669.610000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294669.610000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294669.610000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294669.610000] mice: PS/2 mouse device common for all mice
[4294669.612000] EISA: Probing bus 0 at eisa.0
[4294669.612000] EISA: Detected 0 cards.
[4294669.612000] NET: Registered protocol family 2
[4294669.625000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[4294669.625000] TCP established hash table entries: 32768 (order: 5, 131072 bytes)
[4294669.625000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[4294669.625000] TCP: Hash tables configured (established 32768 bind 32768)
[4294669.625000] TCP reno registered
[4294669.625000] TCP bic registered
[4294669.625000] NET: Registered protocol family 1
[4294669.625000] NET: Registered protocol family 8
[4294669.625000] NET: Registered protocol family 20
[4294669.625000] Using IPI Shortcut mode
[4294669.625000] ACPI wakeup devices:
[4294669.625000] PCI0 PEX0 PEX1 PEX2 PEX3 PEX4 PEX5 HUB0 USB0 USB1 USB2 USB3 USBE AC97 MC97 AZAL
[4294669.625000] ACPI: (supports S0 S3 S4 S5)
[4294669.625000] Freeing unused kernel memory: 288k freed
[4294670.264000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294670.298000] vga16fb: initializing
[4294670.298000] vga16fb: mapped to 0xc00a0000
[4294670.419000] Console: switching to colour frame buffer device 80x25
[4294670.419000] fb0: VGA16 VGA frame buffer device
[4294671.548000] Capability LSM initialized
[4294671.576000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294672.009000] SCSI subsystem initialized
[4294672.010000] ACPI: bus type scsi registered
[4294672.010000] libata version 1.20 loaded.
[4294672.012000] ata_piix 0000:00:1f.2: version 1.05
[4294672.012000] ata_pci_init_one: pci_dev class+intf: 0x10180
[4294672.012000] ata_pci_init_one: NO_LEGACY == 0
[4294672.012000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
[4294672.012000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294672.012000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
[4294672.182000] ata1: dev 0 cfg 00:0040 49:2f00 82:746b 83:7f01 84:4023 85:7468 86:3e01 87:4023 88:20ff 93:0000
[4294672.182000] ata1: dev 0 ATA-7, max UDMA7, 390721968 sectors: LBA48
[4294672.182000] ata_acpi_push_id: skipping for PATA mode
[4294672.182000] ata1: dev 0 configured for UDMA/133
[4294672.182000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294672.182000] pata_get_dev_handle: dev_handle: 0xdffd82a0, parent_handle: 0xdf927460
[4294672.182000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff68a00, *handle=0xdffd82a0
[4294672.182000] do_drive_get_GTF: drive w/ adr=0: v: 0xdffd8e40
[4294672.183000] scsi0 : ata_piix
[4294672.183000] Vendor: ATA Model: SAMSUNG SP2004C Rev: VM10
[4294672.183000] Type: Direct-Access ANSI SCSI revision: 05
[4294672.183000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294672.183000] pata_get_dev_handle: dev_handle: 0xdffd82a0, parent_handle: 0xdf927460
[4294672.183000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff68a00, *handle=0xdffd82a0
[4294672.184000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
[4294672.489000] ata2: dev 0 cfg 00:8580 49:0b00 82:0000 83:0200 84:0000 85:0000 86:0000 87:0000 88:0407 93:0000
[4294672.489000] ata2: dev 0 ATAPI, max UDMA/33
[4294672.489000] ata_acpi_push_id: skipping for PATA mode
[4294672.489000] ata2: dev 0 configured for UDMA/33
[4294672.489000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294672.489000] pata_get_dev_handle: dev_handle: 0xdffd82a0, parent_handle: 0xdf927460
[4294672.489000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff68a00, *handle=0xdffd82a0
[4294672.489000] do_drive_get_GTF: drive w/ adr=0: v: 0xdffd8cc0
[4294672.490000] scsi1 : ata_piix
[4294672.492000] Vendor: _NEC Model: DVD_RW ND-4550A Rev: 1.84
[4294672.492000] Type: CD-ROM ANSI SCSI revision: 05
[4294672.492000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294672.492000] pata_get_dev_handle: dev_handle: 0xdffd82a0, parent_handle: 0xdf927460
[4294672.492000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff68a00, *handle=0xdffd82a0
[4294672.499000] Driver 'sd' needs updating - please use bus_type methods
[4294672.505000] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[4294672.505000] SCSI device sda: drive cache: write back
[4294672.507000] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[4294672.507000] SCSI device sda: drive cache: write back
[4294672.507000] sda: sda1 sda2 sda3
[4294672.559000] sd 0:0:0:0: Attached scsi disk sda
[4294672.597000] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[4294672.597000] Uniform CD-ROM driver Revision: 3.20
[4294672.598000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[4294672.752000] usbcore: registered new driver usbfs
[4294672.753000] usbcore: registered new driver hub
[4294672.754000] USB Universal Host Controller Interface driver v2.3
[4294672.755000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201
[4294672.755000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294672.755000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294672.755000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294672.755000] uhci_hcd 0000:00:1d.0: irq 201, io base 0x0000bc00
[4294672.755000] hub 1-0:1.0: USB hub found
[4294672.755000] hub 1-0:1.0: 2 ports detected
[4294672.807000] ieee1394: Initialized config rom entry `ip1394'
[4294672.856000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
[4294672.856000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294672.856000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294672.856000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294672.856000] uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000b000
[4294672.856000] hub 2-0:1.0: USB hub found
[4294672.856000] hub 2-0:1.0: 2 ports detected
[4294672.957000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
[4294672.957000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294672.957000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294672.957000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294672.957000] uhci_hcd 0000:00:1d.2: irq 209, io base 0x0000b400
[4294672.957000] hub 3-0:1.0: USB hub found
[4294672.957000] hub 3-0:1.0: 2 ports detected
[4294673.058000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[4294673.058000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294673.058000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294673.058000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294673.058000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000b800
[4294673.058000] hub 4-0:1.0: USB hub found
[4294673.058000] hub 4-0:1.0: 2 ports detected
[4294673.160000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
[4294673.160000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294673.160000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294673.160000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294673.161000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294673.161000] ehci_hcd 0000:00:1d.7: irq 201, io mem 0xe6104000
[4294673.164000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294673.165000] hub 5-0:1.0: USB hub found
[4294673.165000] hub 5-0:1.0: 8 ports detected
[4294673.266000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[4294673.266000] ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 23 (level, low) -> IRQ 201
[4294673.316000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201] MMIO=[e6004000-e60047ff] Max Packet=[2048]
[4294673.346000] ide0: I/O resource 0x1F0-0x1F7 not free.
[4294673.346000] ide0: ports already in use, skipping probe
[4294673.346000] ide1: I/O resource 0x170-0x177 not free.
[4294673.346000] ide1: ports already in use, skipping probe
[4294673.379000] Attempting manual resume
[4294673.407000] EXT3-fs: mounted filesystem with ordered data mode.
[4294673.421000] kjournald starting. Commit interval 5 seconds
[4294674.092000] usb 3-1: new low speed USB device using uhci_hcd and address 3
[4294674.443000] usb 3-2: new low speed USB device using uhci_hcd and address 4
[4294674.572000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00148500005ec855]
[4294674.810000] usb 4-1: new low speed USB device using uhci_hcd and address 2
[4294680.200000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294680.200000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[4294681.440000] Linux agpgart interface v0.101 (c) Dave Jones
[4294681.444000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294681.463000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294681.475000] agpgart: Detected an Intel 945G Chipset.
[4294681.492000] agpgart: AGP aperture is 256M @ 0x0
[4294681.739000] hw_random: RNG not detected
[4294681.795000] Real Time Clock Driver v1.12
[4294681.834000] input: PC Speaker as /class/input/input1
[4294681.850000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294681.850000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4294681.883000] FDC 0 is a post-1991 82077
[4294682.120000] usbcore: registered new driver hiddev
[4294682.140000] input: HID 1267:0103 as /class/input/input2
[4294682.140000] input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1d.2-1
[4294682.166000] input: HID 1267:0103 as /class/input/input3
[4294682.166000] input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1d.2-1
[4294682.194000] input: Logitech USB Mouse as /class/input/input4
[4294682.194000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.2-2
[4294682.215000] input: G-Tech CHINA USB Wireless Mouse & KeyBoard V1.01 as /class/input/input5
[4294682.215000] input: USB HID v1.00 Keyboard [G-Tech CHINA USB Wireless Mouse & KeyBoard V1.01 ] on usb-0000:00:1d.3-1
[4294682.260000] input: G-Tech CHINA USB Wireless Mouse & KeyBoard V1.01 as /class/input/input6
[4294682.260000] input: USB HID v1.00 Mouse [G-Tech CHINA USB Wireless Mouse & KeyBoard V1.01 ] on usb-0000:00:1d.3-1
[4294682.260000] usbcore: registered new driver usbhid
[4294682.260000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294682.384000] ts: Compaq touchscreen protocol output
[4294682.865000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
[4294682.865000] e100: Copyright(c) 1999-2005 Intel Corporation
[4294682.866000] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 217
[4294682.885000] e100: eth0: e100_probe: addr 0xe6006000, irq 217, MAC addr 00:14:85:5E:F3:B0
[4294683.183000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[4294683.783000] lp: driver loaded but no devices found
[4294683.810000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[4294683.810000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294683.810000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294683.841000] Adding 2337448k swap on /dev/sda3. Priority:-1 extents:1 across:2337448k
[4294684.008000] EXT3 FS on sda2, internal journal
[4294684.136000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294684.136000] md: bitmap version 4.39
[4294684.218000] NET: Registered protocol family 17
[4294684.556000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294685.117000] cdrom: open failed.
[4294685.439000] kjournald starting. Commit interval 5 seconds
[4294685.439000] EXT3 FS on sda1, internal journal
[4294685.439000] EXT3-fs: mounted filesystem with ordered data mode.
[4294691.019000] ACPI: Power Button (FF) [PWRF]
[4294691.019000] ACPI: Power Button (CM) [PWRB]
[4294691.091000] ibm_acpi: ec object not found
[4294691.107000] pcc_acpi: loading...
[4294691.639000] acpi-cpufreq: CPU0 - ACPI performance management activated.
[4294694.286000] [drm] Initialized drm 1.0.1 20051102
[4294694.293000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294694.293000] [drm] Initialized radeon 1.24.0 20060225 on minor 0
[4294695.098000] ppdev: user-space parallel port driver
[4294695.336000] apm: BIOS not found.
[4294696.150000] ttyS8: LSR safety check engaged!
[4294697.532000] Bluetooth: Core ver 2.8
[4294697.532000] NET: Registered protocol family 31
[4294697.532000] Bluetooth: HCI device and connection manager initialized
[4294697.532000] Bluetooth: HCI socket layer initialized
[4294697.556000] Bluetooth: L2CAP ver 2.8
[4294697.556000] Bluetooth: L2CAP socket layer initialized
[4294697.578000] Bluetooth: RFCOMM socket layer initialized
[4294697.578000] Bluetooth: RFCOMM TTY layer initialized
[4294697.578000] Bluetooth: RFCOMM ver 1.7
[4294698.996000] [drm] Setting GART location based on new memory map
[4294698.997000] [drm] Loading R300 Microcode
[4294698.997000] [drm] writeback test succeeded in 1 usecs
[4294714.920000] NET: Registered protocol family 10
[4294714.920000] lo: Disabled Privacy Extensions
[4294714.920000] IPv6 over IPv4 tunneling driver
[4294725.115000] eth0: no IPv6 routers present
[4296402.627000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[4296402.740000] usb 1-2: device descriptor read/64, error -71
[4296402.954000] usb 1-2: device descriptor read/64, error -71
[4296403.157000] usb 1-2: new full speed USB device using uhci_hcd and address 3
[4296403.270000] usb 1-2: device descriptor read/64, error -71
[4296403.484000] usb 1-2: device descriptor read/64, error -71
[4296403.687000] usb 1-2: new full speed USB device using uhci_hcd and address 4
[4296404.095000] usb 1-2: device not accepting address 4, error -71
[4296404.197000] usb 1-2: new full speed USB device using uhci_hcd and address 5
[4296404.605000] usb 1-2: device not accepting address 5, error -71
[4297450.127000] usb 1-1: new full speed USB device using uhci_hcd and address 6
[4297450.240000] usb 1-1: device descriptor read/64, error -71
[4297450.454000] usb 1-1: device descriptor read/64, error -71
[4297450.657000] usb 1-1: new full speed USB device using uhci_hcd and address 7
[4297450.770000] usb 1-1: device descriptor read/64, error -71
[4297450.984000] usb 1-1: device descriptor read/64, error -71
[4297451.187000] usb 1-1: new full speed USB device using uhci_hcd and address 8
[4297451.595000] usb 1-1: device not accepting address 8, error -71
[4297451.697000] usb 1-1: new full speed USB device using uhci_hcd and address 9
[4297452.105000] usb 1-1: device not accepting address 9, error -71