# Generated by the muttrc builder at http://muttrcbuilder.org/
# for mutt-1.5.15
#
# abort_nosubject
#
# Type: quadoption
# Default: ask-yes
#
# If set to yes, when composing messages and no subject is given at the
# subject prompt, composition will be aborted. If set to no, composing
# messages with no subject given at the subject prompt will never be
# aborted.
#
# set abort_nosubject = ask-yes
#
##########
# abort_unmodified
#
# Type: quadoption
# Default: yes
#
# If set to yes, composition will automatically abort after editing the
# message body if no changes are made to the file (this check only
# happens after the first edit of the file). When set to no, composition
# will never be aborted.
#
# set abort_unmodified = yes
#
##########
# alias_file
#
# Type: path
# Default: "~/.muttrc"
#
# The default file in which to save aliases created by the
# ``create-alias'' function.
#
# Note: Mutt will not automatically source this file; you must
# explicitly use the ``source'' command for it to be executed.
#
# The default for this option is the currently used muttrc file, or
# ``~/.muttrc'' if no user muttrc was found.
#
# set alias_file = '~/.muttrc'
#
##########
# alias_format
#
# Type: string
# Default: "%4n %2f %t %-10a %r"
#
# Specifies the format of the data displayed for the `alias' menu. The
# following printf(3)-style sequences are available:
#
# %a
# alias name
#
# %f
# flags - currently, a "d" for an alias marked for deletion
#
# %n
# index number
#
# %r
# address which alias expands to
#
# %t
# character which indicates if the alias is tagged for inclusion
#
# set alias_format = '%4n %2f %t %-10a %r'
#
##########
# allow_8bit
#
# Type: boolean
# Default: yes
#
# Controls whether 8-bit data is converted to 7-bit using either Quoted-
# Printable or Base64 encoding when sending mail.
#
# set allow_8bit = yes
#
##########
# allow_ansi
#
# Type: boolean
# Default: no
#
# Controls whether ANSI color codes in messages (and color tags in rich
# text messages) are to be interpreted. Messages containing these codes
# are rare, but if this option is set, their text will be colored
# accordingly. Note that this may override your color choices, and even
# present a security problem, since a message could include a line like
# "[-- PGP output follows ..." and give it the same color as your
# attachment color.
#
# set allow_ansi = no
#
##########
# arrow_cursor
#
# Type: boolean
# Default: no
#
# When set, an arrow (``->'') will be used to indicate the current entry
# in menus instead of highlighting the whole line. On slow network or
# modem links this will make response faster because there is less that
# has to be redrawn on the screen when moving to the next or previous
# entries in the menu.
#
# set arrow_cursor = no
#
##########
# ascii_chars
#
# Type: boolean
# Default: no
#
# If set, Mutt will use plain ASCII characters when displaying thread
# and attachment trees, instead of the default ACS characters.
#
# set ascii_chars = no
#
##########
# askbcc
#
# Type: boolean
# Default: no
#
# If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients
# before editing an outgoing message.
#
# set askbcc = no
#
##########
# askcc
#
# Type: boolean
# Default: no
#
# If set, Mutt will prompt you for carbon-copy (Cc) recipients before
# editing the body of an outgoing message.
#
# set askcc = no
#
##########
# assumed_charset
#
# Type: string
# Default: ""
#
# This variable is a colon-separated list of character encoding schemes
# for messages without character encoding indication. Header field
# values and message body content without character encoding indication
# would be assumed that they are written in one of this list. By
# default, all the header fields and message body without any charset
# indication are assumed to be in "us-ascii".
#
# For example, Japanese users might prefer this:
#
# set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
#
# However, only the first content is valid for the message body.
#
# set assumed_charset = ''
#
##########
# attach_charset
#
# Type: string
# Default: ""
#
# This variable is a colon-separated list of character encoding schemes
# for text file attachments. If unset, $charset value will be used
# instead. For example, the following configuration would work for
# Japanese text handling:
#
# set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
#
# Note: "iso-2022-*" must be put at the head of the value as shown above
# if included.
#
# set attach_charset = ''
#
##########
# attach_format
#
# Type: string
# Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
#
# This variable describes the format of the `attachment' menu. The
# following printf-style sequences are understood:
#
# %C
# charset
#
# %c
# requires charset conversion (n or c)
#
# %D
# deleted flag
#
# %d
# description
#
# %e
# MIME content-transfer-encoding
#
# %f
# filename
#
# %I
# disposition (I=inline, A=attachment)
#
# %m
# major MIME type
#
# %M
# MIME subtype
#
# %n
# attachment number
#
# %Q
# "Q", if MIME part qualifies for attachment counting
#
# %s
# size
#
# %t
# tagged flag
#
# %T
# graphic tree characters
#
# %u
# unlink (=to delete) flag
#
# %X
# number of qualifying MIME parts in this part and its children
# (please see the ``attachments'' section for possible speed
# effects)
#
# %>X
# right justify the rest of the string and pad with character "X"
#
# %|X
# pad to the end of the line with character "X"
#
# set attach_format = '%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] '
#
##########
# attach_sep
#
# Type: string
# Default: "\n"
#
# The separator to add between attachments when operating (saving,
# printing, piping, etc) on a list of tagged attachments.
#
# set attach_sep = '\n'
#
##########
# attach_split
#
# Type: boolean
# Default: yes
#
# If this variable is unset, when operating (saving, printing, piping,
# etc) on a list of tagged attachments, Mutt will concatenate the
# attachments and will operate on them as a single attachment. The
# ``$attach_sep'' separator is added after each attachment. When set,
# Mutt will operate on the attachments one by one.
#
# set attach_split = yes
#
##########
# attribution
#
# Type: string
# Default: "On %d, %n wrote:"
#
# This is the string that will precede a message which has been included
# in a reply. For a full listing of defined printf()-like sequences see
# the section on ``$index_format''.
#
# set attribution = 'On %d, %n wrote:'
#
##########
# autoedit
#
# Type: boolean
# Default: no
#
# When set along with ``$edit_headers'', Mutt will skip the initial
# send-menu and allow you to immediately begin editing the body of your
# message. The send-menu may still be accessed once you have finished
# editing the body of your message.
#
# Also see ``$fast_reply''.
#
# set autoedit = no
#
##########
# auto_tag
#
# Type: boolean
# Default: no
#
# When set, functions in the index menu which affect a message will be
# applied to all tagged messages (if there are any). When unset, you
# must first use the tag-prefix function (default: ";") to make the next
# function apply to all tagged messages.
#
# set auto_tag = no
#
##########
# beep
#
# Type: boolean
# Default: yes
#
# When this variable is set, mutt will beep when an error occurs.
#
# set beep = yes
#
##########
# beep_new
#
# Type: boolean
# Default: no
#
# When this variable is set, mutt will beep whenever it prints a message
# notifying you of new mail. This is independent of the setting of the
# ``$beep'' variable.
#
# set beep_new = no
#
##########
# bounce
#
# Type: quadoption
# Default: ask-yes
#
# Controls whether you will be asked to confirm bouncing messages. If
# set to yes you don't get asked if you want to bounce a message.
# Setting this variable to no is not generally useful, and thus not
# recommended, because you are unable to bounce messages.
#
# set bounce = ask-yes
#
##########
# bounce_delivered
#
# Type: boolean
# Default: yes
#
# When this variable is set, mutt will include Delivered-To headers when
# bouncing messages. Postfix users may wish to unset this variable.
#
# set bounce_delivered = yes
#
##########
# braille_friendly
#
# Type: boolean
# Default: no
#
# When this variable is set, mutt will place the cursor at the beginning
# of the current line in menus, even when the arrow_cursor variable is
# unset, making it easier for blind persons using Braille displays to
# follow these menus. The option is disabled by default because many
# visual terminals don't permit making the cursor invisible.
#
# set braille_friendly = no
#
##########
# check_mbox_size
#
# Type: boolean
# Default: no
#
# When this variable is set, mutt will use file size attribute instead
# of access time when checking for new mail.
#
# set check_mbox_size = no
#
##########
# charset
#
# Type: string
# Default: ""
#
# Character set your terminal uses to display and enter textual data.
#
# set charset = ''
#
##########
# check_new
#
# Type: boolean
# Default: yes
#
# Note: this option only affects maildir and MH style mailboxes.
#
# When set, Mutt will check for new mail delivered while the mailbox is
# open. Especially with MH mailboxes, this operation can take quite some
# time since it involves scanning the directory and checking each file
# to see if it has already been looked at. If check_new is unset, no
# check for new mail is performed while the mailbox is open.
#
# set check_new = yes
#
##########
# collapse_unread
#
# Type: boolean
# Default: yes
#
# When unset, Mutt will not collapse a thread if it contains any unread
# messages.
#
# set collapse_unread = yes
#
##########
# uncollapse_jump
#
# Type: boolean
# Default: no
#
# When set, Mutt will jump to the next unread message, if any, when the
# current thread is uncollapsed.
#
# set uncollapse_jump = no
#
##########
# compose_format
#
# Type: string
# Default: "-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"
#
# Controls the format of the status line displayed in the Compose menu.
# This string is similar to ``$status_format'', but has its own set of
# printf()-like sequences:
#
# %a
# total number of attachments
#
# %h
# local hostname
#
# %l
# approximate size (in bytes) of the current message
#
# %v
# Mutt version string
#
# See the text describing the ``$status_format'' option for more
# information on how to set ``$compose_format''.
#
# set compose_format = '-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-'
#
##########
# config_charset
#
# Type: string
# Default: ""
#
# When defined, Mutt will recode commands in rc files from this
# encoding.
#
# set config_charset = ''
#
##########
# confirmappend
#
# Type: boolean
# Default: yes
#
# When set, Mutt will prompt for confirmation when appending messages to
# an existing mailbox.
#
# set confirmappend = yes
#
##########
# confirmcreate
#
# Type: boolean
# Default: yes
#
# When set, Mutt will prompt for confirmation when saving messages to a
# mailbox which does not yet exist before creating it.
#
# set confirmcreate = yes
#
##########
# connect_timeout
#
# Type: number
# Default: 30
#
# Causes Mutt to timeout a network connection (for IMAP or POP) after
# this many seconds if the connection is not able to be established. A
# negative value causes Mutt to wait indefinitely for the connection to
# succeed.
#
# set connect_timeout = '30'
#
##########
# content_type
#
# Type: string
# Default: "text/plain"
#
# Sets the default Content-Type for the body of newly composed messages.
#
# set content_type = 'text/plain'
#
##########
# copy
#
# Type: quadoption
# Default: yes
#
# This variable controls whether or not copies of your outgoing messages
# will be saved for later references. Also see ``$record'',
# ``$save_name'', ``$force_name'' and ``fcc-hook''.
#
# set copy = yes
#
##########
# crypt_use_gpgme
#
# Type: boolean
# Default: no
#
# This variable controls the use of the GPGME-enabled crypto backends.
# If it is set and Mutt was built with gpgme support, the gpgme code for
# S/MIME and PGP will be used instead of the classic code. Note that you
# need to set this option in .muttrc; it won't have any effect when used
# interactively.
#
# set crypt_use_gpgme = no
#
##########
# crypt_use_pka
#
# Type: boolean
# Default: no
#
# (http://www.g10code.de/docs/pka-intro.de.pdf) during signature
# verification (only supported by the GPGME backend).
#
# set crypt_use_pka = no
#
##########
# crypt_autopgp
#
# Type: boolean
# Default: yes
#
# This variable controls whether or not mutt may automatically enable
# PGP encryption/signing for messages. See also ``$crypt_autoencrypt'',
# ``$crypt_replyencrypt'', ``$crypt_autosign'', ``$crypt_replysign'' and
# ``$smime_is_default''.
#
# set crypt_autopgp = yes
#
##########
# crypt_autosmime
#
# Type: boolean
# Default: yes
#
# This variable controls whether or not mutt may automatically enable
# S/MIME encryption/signing for messages. See also
# ``$crypt_autoencrypt'', ``$crypt_replyencrypt'', ``$crypt_autosign'',
# ``$crypt_replysign'' and ``$smime_is_default''.
#
# set crypt_autosmime = yes
#
##########
# date_format
#
# Type: string
# Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z"
#
# This variable controls the format of the date printed by the ``%d''
# sequence in ``$index_format''. This is passed to the strftime call to
# process the date. See the man page for strftime(3) for the proper
# syntax.
#
# Unless the first character in the string is a bang (``!''), the month
# and week day names are expanded according to the locale specified in
# the variable ``$locale''. If the first character in the string is a
# bang, the bang is discarded, and the month and week day names in the
# rest of the string are expanded in the C locale (that is in US
# English).
#
# set date_format = '!%a, %b %d, %Y at %I:%M:%S%p %Z'
#
##########
# default_hook
#
# Type: string
# Default: "~f %s !~P | (~P ~C %s)"
#
# This variable controls how message-hooks, reply-hooks, send-hooks,
# send2-hooks, save-hooks, and fcc-hooks will be interpreted if they are
# specified with only a simple regexp, instead of a matching pattern.
# The hooks are expanded when they are declared, so a hook will be
# interpreted according to the value of this variable at the time the
# hook is declared. The default value matches if the message is either
# from a user matching the regular expression given, or if it is from
# you (if the from address matches ``alternates'') and is to or cc'ed to
# a user matching the given regular expression.
#
# set default_hook = '~f %s !~P | (~P ~C %s)'
#
##########
# delete
#
# Type: quadoption
# Default: ask-yes
#
# Controls whether or not messages are really deleted when closing or
# synchronizing a mailbox. If set to yes, messages marked for deleting
# will automatically be purged without prompting. If set to no, messages
# marked for deletion will be kept in the mailbox.
#
# set delete = ask-yes
#
##########
# delete_untag
#
# Type: boolean
# Default: yes
#
# If this option is set, mutt will untag messages when marking them for
# deletion. This applies when you either explicitly delete a message, or
# when you save it to another folder.
#
# set delete_untag = yes
#
##########
# digest_collapse
#
# Type: boolean
# Default: yes
#
# If this option is set, mutt's received-attachments menu will not show
# the subparts of individual messages in a multipart/digest. To see
# these subparts, press 'v' on that menu.
#
# set digest_collapse = yes
#
##########
# display_filter
#
# Type: path
# Default: ""
#
# When set, specifies a command used to filter messages. When a message
# is viewed it is passed as standard input to $display_filter, and the
# filtered message is read from the standard output.
#
# set display_filter = ''
#
##########
# dotlock_program
#
# Type: path
# Default: "/usr/local/bin/mutt_dotlock"
#
# Contains the path of the mutt_dotlock (8) binary to be used by mutt.
#
# set dotlock_program = '/usr/local/bin/mutt_dotlock'
#
##########
# dsn_notify
#
# Type: string
# Default: ""
#
# Note: you should not enable this unless you are using Sendmail 8.8.x
# or greater.
#
# This variable sets the request for when notification is returned. The
# string consists of a comma separated list (no spaces!) of one or more
# of the following: never, to never request notification, failure, to
# request notification on transmission failure, delay, to be notified of
# message delays, success, to be notified of successful transmission.
#
# Example: set dsn_notify="failure,delay"
#
# set dsn_notify = ''
#
##########
# dsn_return
#
# Type: string
# Default: ""
#
# Note: you should not enable this unless you are using Sendmail 8.8.x
# or greater.
#
# This variable controls how much of your message is returned in DSN
# messages. It may be set to either hdrs to return just the message
# header, or full to return the full message.
#
# Example: set dsn_return=hdrs
#
# set dsn_return = ''
#
##########
# duplicate_threads
#
# Type: boolean
# Default: yes
#
# This variable controls whether mutt, when sorting by threads, threads
# messages with the same message-id together. If it is set, it will
# indicate that it thinks they are duplicates of each other with an
# equals sign in the thread diagram.
#
# set duplicate_threads = yes
#
##########
# edit_headers
#
# Type: boolean
# Default: no
#
# This option allows you to edit the header of your outgoing messages
# along with the body of your message.
#
# set edit_headers = no
#
##########
# editor
#
# Type: path
# Default: ""
#
# This variable specifies which editor is used by mutt. It defaults to
# the value of the VISUAL, or EDITOR, environment variable, or to the
# string "vi" if neither of those are set.
#
# set editor = ''
#
##########
# encode_from
#
# Type: boolean
# Default: no
#
# When set, mutt will quoted-printable encode messages when they contain
# the string "From " in the beginning of a line. Useful to avoid the
# tampering certain mail delivery and transport agents tend to do with
# messages.
#
# set encode_from = no
#
##########
# envelope_from_address
#
# Type: e-mail address
# Default: ""
#
# Manually sets the envelope sender for outgoing messages. This value is
# ignored if ``$use_envelope_from'' is unset.
#
# set envelope_from_address = ''
#
##########
# escape
#
# Type: string
# Default: "~"
#
# Escape character to use for functions in the builtin editor.
#
# set escape = '~'
#
##########
# fast_reply
#
# Type: boolean
# Default: no
#
# When set, the initial prompt for recipients and subject are skipped
# when replying to messages, and the initial prompt for subject is
# skipped when forwarding messages.
#
# Note: this variable has no effect when the ``$autoedit'' variable is
# set.
#
# set fast_reply = no
#
##########
# fcc_attach
#
# Type: boolean
# Default: yes
#
# This variable controls whether or not attachments on outgoing messages
# are saved along with the main body of your message.
#
# set fcc_attach = yes
#
##########
# fcc_clear
#
# Type: boolean
# Default: no
#
# When this variable is set, FCCs will be stored unencrypted and
# unsigned, even when the actual message is encrypted and/or signed.
# (PGP only)
#
# set fcc_clear = no
#
##########
# folder
#
# Type: path
# Default: "~/Mail"
#
# Specifies the default location of your mailboxes. A `+' or `=' at the
# beginning of a pathname will be expanded to the value of this
# variable. Note that if you change this variable from the default value
# you need to make sure that the assignment occurs before you use `+' or
# `=' for any other variables since expansion takes place during the
# `set' command.
#
# set folder = '~/Mail'
#
##########
# folder_format
#
# Type: string
# Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
#
# This variable allows you to customize the file browser display to your
# personal taste. This string is similar to ``$index_format'', but has
# its own set of printf()-like sequences:
#
# %C
# current file number
#
# %d
# date/time folder was last modified
#
# %f
# filename
#
# %F
# file permissions
#
# %g
# group name (or numeric gid, if missing)
#
# %l
# number of hard links
#
# %N
# N if folder has new mail, blank otherwise
#
# %s
# size in bytes
#
# %t
# * if the file is tagged, blank otherwise
#
# %u
# owner name (or numeric uid, if missing)
#
# %>X
# right justify the rest of the string and pad with character "X"
#
# %|X
# pad to the end of the line with character "X"
#
# set folder_format = '%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f'
#
##########
# followup_to
#
# Type: boolean
# Default: yes
#
# Controls whether or not the Mail-Followup-To header field is generated
# when sending mail. When set, Mutt will generate this field when you
# are replying to a known mailing list, specified with the ``subscribe''
# or ``lists'' commands.
#
# This field has two purposes. First, preventing you from receiving
# duplicate copies of replies to messages which you send to mailing
# lists, and second, ensuring that you do get a reply separately for any
# messages sent to known lists to which you are not subscribed. The
# header will contain only the list's address for subscribed lists, and
# both the list address and your own email address for unsubscribed
# lists. Without this header, a group reply to your message sent to a
# subscribed list will be sent to both the list and your address,
# resulting in two copies of the same email for you.
#
# set followup_to = yes
#
##########
# force_name
#
# Type: boolean
# Default: no
#
# This variable is similar to ``$save_name'', except that Mutt will
# store a copy of your outgoing message by the username of the address
# you are sending to even if that mailbox does not exist.
#
# Also see the ``$record'' variable.
#
# set force_name = no
#
##########
# forward_decode
#
# Type: boolean
# Default: yes
#
# Controls the decoding of complex MIME messages into text/plain when
# forwarding a message. The message header is also RFC2047 decoded. This
# variable is only used, if ``$mime_forward'' is unset, otherwise
# ``$mime_forward_decode'' is used instead.
#
# set forward_decode = yes
#
##########
# forward_edit
#
# Type: quadoption
# Default: yes
#
# This quadoption controls whether or not the user is automatically
# placed in the editor when forwarding messages. For those who always
# want to forward with no modification, use a setting of ``no''.
#
# set forward_edit = yes
#
##########
# forward_format
#
# Type: string
# Default: "[%a: %s]"
#
# This variable controls the default subject when forwarding a message.
# It uses the same format sequences as the ``$index_format'' variable.
#
# set forward_format = '[%a: %s]'
#
##########
# forward_quote
#
# Type: boolean
# Default: no
#
# When set forwarded messages included in the main body of the message
# (when ``$mime_forward'' is unset) will be quoted using
# ``$indent_string''.
#
# set forward_quote = no
#
##########
# from
#
# Type: e-mail address
# Default: ""
#
# When set, this variable contains a default from address. It can be
# overridden using my_hdr (including from send-hooks) and
# ``$reverse_name''. This variable is ignored if ``$use_from'' is unset.
#
# Defaults to the contents of the environment variable EMAIL.
#
# set from = ''
#
##########
# gecos_mask
#
# Type: regular expression
# Default: "^[^,]*"
#
# A regular expression used by mutt to parse the GECOS field of a
# password entry when expanding the alias. By default the regular
# expression is set to "^[^,]*" which will return the string up to the
# first "," encountered. If the GECOS field contains a string like
# "lastname, firstname" then you should set the gecos_mask=".*".
#
# This can be useful if you see the following behavior: you address a
# e-mail to user ID stevef whose full name is Steve Franklin. If mutt
# expands stevef to "Franklin" stevef@foo.bar then you should set the
# gecos_mask to a regular expression that will match the whole name so
# mutt will expand "Franklin" to "Franklin, Steve".
#
# set gecos_mask = '^[^,]*'
#
##########
# hdrs
#
# Type: boolean
# Default: yes
#
# When unset, the header fields normally added by the ``my_hdr'' command
# are not created. This variable must be unset before composing a new
# message or replying in order to take effect. If set, the user defined
# header fields are added to every new message.
#
# set hdrs = yes
#
##########
# header
#
# Type: boolean
# Default: no
#
# When set, this variable causes Mutt to include the header of the
# message you are replying to into the edit buffer. The ``$weed''
# setting applies.
#
# set header = no
#
##########
# help
#
# Type: boolean
# Default: yes
#
# When set, help lines describing the bindings for the major functions
# provided by each menu are displayed on the first line of the screen.
#
# Note: The binding will not be displayed correctly if the function is
# bound to a sequence rather than a single keystroke. Also, the help
# line may not be updated if a binding is changed while Mutt is running.
# Since this variable is primarily aimed at new users, neither of these
# should present a major problem.
#
# set help = yes
#
##########
# hidden_host
#
# Type: boolean
# Default: no
#
# When set, mutt will skip the host name part of ``$hostname'' variable
# when adding the domain part to addresses. This variable does not
# affect the generation of Message-IDs, and it will not lead to the
# cut-off of first-level domains.
#
# set hidden_host = no
#
##########
# hide_limited
#
# Type: boolean
# Default: no
#
# When set, mutt will not show the presence of messages that are hidden
# by limiting, in the thread tree.
#
# set hide_limited = no
#
##########
# hide_missing
#
# Type: boolean
# Default: yes
#
# When set, mutt will not show the presence of missing messages in the
# thread tree.
#
# set hide_missing = yes
#
##########
# hide_thread_subject
#
# Type: boolean
# Default: yes
#
# When set, mutt will not show the subject of messages in the thread
# tree that have the same subject as their parent or closest previously
# displayed sibling.
#
# set hide_thread_subject = yes
#
##########
# hide_top_limited
#
# Type: boolean
# Default: no
#
# When set, mutt will not show the presence of messages that are hidden
# by limiting, at the top of threads in the thread tree. Note that when
# $hide_limited is set, this option will have no effect.
#
# set hide_top_limited = no
#
##########
# hide_top_missing
#
# Type: boolean
# Default: yes
#
# When set, mutt will not show the presence of missing messages at the
# top of threads in the thread tree. Note that when $hide_missing is
# set, this option will have no effect.
#
# set hide_top_missing = yes
#
##########
# history
#
# Type: number
# Default: 10
#
# This variable controls the size (in number of strings remembered) of
# the string history buffer. The buffer is cleared each time the
# variable is set.
#
# set history = '10'
#
##########
# history_file
#
# Type: path
# Default: "~/.mutthistory"
#
# The file in which Mutt will save its history.
#
# set history_file = '~/.mutthistory'
#
##########
# honor_followup_to
#
# Type: quadoption
# Default: yes
#
# This variable controls whether or not a Mail-Followup-To header is
# honored when group-replying to a message.
#
# set honor_followup_to = yes
#
##########
# hostname
#
# Type: string
# Default: ""
#
# Specifies the hostname to use after the ``@'' in local e-mail
# addresses. This overrides the compile time definition obtained from
# /etc/resolv.conf.
#
# set hostname = ''
#
##########
# ignore_linear_white_space
#
# Type: boolean
# Default: no
#
# This option replaces linear-white-space between encoded-word and *text
# to a single space to prevent the display of MIME-encoded ``Subject''
# field from being divided into multiple lines.
#
# set ignore_linear_white_space = no
#
##########
# ignore_list_reply_to
#
# Type: boolean
# Default: no
#
# Affects the behaviour of the reply function when replying to messages
# from mailing lists. When set, if the ``Reply-To:'' field is set to the
# same value as the ``To:'' field, Mutt assumes that the ``Reply-To:''
# field was set by the mailing list to automate responses to the list,
# and will ignore this field. To direct a response to the mailing list
# when this option is set, use the list-reply function; group-reply will
# reply to both the sender and the list.
#
# set ignore_list_reply_to = no
#
##########
# imap_authenticators
#
# Type: string
# Default: ""
#
# This is a colon-delimited list of authentication methods mutt may
# attempt to use to log in to an IMAP server, in the order mutt should
# try them. Authentication methods are either 'login' or the right side
# of an IMAP 'AUTH=xxx' capability string, eg 'digest-md5', 'gssapi' or
# 'cram-md5'. This parameter is case-insensitive. If this parameter is
# unset (the default) mutt will try all available methods, in order from
# most-secure to least-secure.
#
# Example: set imap_authenticators="gssapi:cram-md5:login"
#
# Note: Mutt will only fall back to other authentication methods if the
# previous methods are unavailable. If a method is available but
# authentication fails, mutt will not connect to the IMAP server.
#
# set imap_authenticators = ''
#
##########
# imap_check_subscribed
#
# Type: boolean
# Default: no
#
# When set, mutt will fetch the set of subscribed folders from your
# server on connection, and add them to the set of mailboxes it polls
# for new mail. See also the ``mailboxes'' command.
#
# set imap_check_subscribed = no
#
##########
# imap_delim_chars
#
# Type: string
# Default: "/."
#
# This contains the list of characters which you would like to treat as
# folder separators for displaying IMAP paths. In particular it helps in
# using the '=' shortcut for your folder variable.
#
# set imap_delim_chars = '/.'
#
##########
# imap_headers
#
# Type: string
# Default: ""
#
# Mutt requests these header fields in addition to the default headers
# ("DATE FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE
# CONTENT-DESCRIPTION IN-REPLY-TO REPLY-TO LINES X-LABEL") from IMAP
# servers before displaying the index menu. You may want to add more
# headers for spam detection. Note: This is a space separated list.
#
# set imap_headers = ''
#
##########
# imap_idle
#
# Type: boolean
# Default: no
#
# When set, mutt will attempt to use the IMAP IDLE extension to check
# for new mail in the current mailbox. Some servers (dovecot was the
# inspiration for this option) react badly to mutt's implementation. If
# your connection seems to freeze up periodically, try unsetting this.
#
# set imap_idle = no
#
##########
# imap_keepalive
#
# Type: number
# Default: 900
#
# This variable specifies the maximum amount of time in seconds that
# mutt will wait before polling open IMAP connections, to prevent the
# server from closing them before mutt has finished with them. The
# default is well within the RFC-specified minimum amount of time (30
# minutes) before a server is allowed to do this, but in practice the
# RFC does get violated every now and then. Reduce this number if you
# find yourself getting disconnected from your IMAP server due to
# inactivity.
#
# set imap_keepalive = '900'
#
##########
# imap_list_subscribed
#
# Type: boolean
# Default: no
#
# This variable configures whether IMAP folder browsing will look for
# only subscribed folders or all folders. This can be toggled in the
# IMAP browser with the toggle-subscribed function.
#
# set imap_list_subscribed = no
#
##########
# imap_login
#
# Type: string
# Default: ""
#
# Your login name on the IMAP server.
#
# This variable defaults to the value of imap_user.
#
set imap_login = 'daslogin' # default: ''
#
##########
# imap_pass
#
# Type: string
# Default: ""
#
# Specifies the password for your IMAP account. If unset, Mutt will
# prompt you for your password when you invoke the fetch-mail function.
# Warning: you should only use this option when you are on a fairly
# secure machine, because the superuser can read your muttrc even if you
# are the only one who can read the file.
#
set imap_pass = 'pwwort' # default: ''
#
##########
# imap_passive
#
# Type: boolean
# Default: yes
#
# When set, mutt will not open new IMAP connections to check for new
# mail. Mutt will only check for new mail over existing IMAP
# connections. This is useful if you don't want to be prompted to
# user/password pairs on mutt invocation, or if opening the connection
# is slow.
#
# set imap_passive = yes
#
##########
# imap_peek
#
# Type: boolean
# Default: yes
#
# When set, mutt will avoid implicitly marking your mail as read
# whenever you fetch a message from the server. This is generally a good
# thing, but can make closing an IMAP folder somewhat slower. This
# option exists to appease speed freaks.
#
# set imap_peek = yes
#
##########
# imap_servernoise
#
# Type: boolean
# Default: yes
#
# When set, mutt will display warning messages from the IMAP server as
# error messages. Since these messages are often harmless, or generated
# due to configuration problems on the server which are out of the
# users' hands, you may wish to suppress them at some point.
#
# set imap_servernoise = yes
#
##########
# imap_user
#
# Type: string
# Default: ""
#
# The name of the user whose mail you intend to access on the IMAP
# server.
#
# This variable defaults to your user name on the local machine.
#
# set imap_user = ''
#
##########
# implicit_autoview
#
# Type: boolean
# Default: no
#
# If set to ``yes'', mutt will look for a mailcap entry with the
# copiousoutput flag set for every MIME attachment it doesn't have an
# internal viewer defined for. If such an entry is found, mutt will use
# the viewer defined in that entry to convert the body part to text
# form.
#
# set implicit_autoview = no
#
##########
# include
#
# Type: quadoption
# Default: ask-yes
#
# Controls whether or not a copy of the message(s) you are replying to
# is included in your reply.
#
# set include = ask-yes
#
##########
# include_onlyfirst
#
# Type: boolean
# Default: no
#
# Controls whether or not Mutt includes only the first attachment of the
# message you are replying.
#
# set include_onlyfirst = no
#
##########
# indent_string
#
# Type: string
# Default: "> "
#
# Specifies the string to prepend to each line of text quoted in a
# message to which you are replying. You are strongly encouraged not to
# change this value, as it tends to agitate the more fanatical netizens.
#
# set indent_string = '> '
#
##########
# index_format
#
# Type: string
# Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
#
# This variable allows you to customize the message index display to
# your personal taste.
#
# ``Format strings'' are similar to the strings used in the ``C''
# function printf to format output (see the man page for more detail).
# The following sequences are defined in Mutt:
#
# %a
# address of the author
#
# %A
# reply-to address (if present; otherwise: address of author)
#
# %b
# filename of the original message folder (think mailBox)
#
# %B
# the list to which the letter was sent, or else the folder name
# (%b).
#
# %c
# number of characters (bytes) in the message
#
# %C
# current message number
#
# %d
# date and time of the message in the format specified by
# ``date_format'' converted to sender's time zone
#
# %D
# date and time of the message in the format specified by
# ``date_format'' converted to the local time zone
#
# %e
# current message number in thread
#
# %E
# number of messages in current thread
#
# %f
# entire From: line (address + real name)
#
# %F
# author name, or recipient name if the message is from you
#
# %H
# spam attribute(s) of this message
#
# %i
# message-id of the current message
#
# %l
# number of lines in the message (does not work with maildir, mh,
# and possibly IMAP folders)
#
# %L
# If an address in the To or CC header field matches an address
# defined by the users ``subscribe'' command, this displays "To
# <list-name>", otherwise the same as %F.
#
# %m
# total number of message in the mailbox
#
# %M
# number of hidden messages if the thread is collapsed.
#
# %N
# message score
#
# %n
# author's real name (or address if missing)
#
# %O
# (_O_riginal save folder) Where mutt would formerly have stashed
# the message: list name or recipient name if no list
#
# %s
# subject of the message
#
# %S
# status of the message (N/D/d/!/r/*)
#
# %t
# `to:' field (recipients)
#
# %T
# the appropriate character from the $to_chars string
#
# %u
# user (login) name of the author
#
# %v
# first name of the author, or the recipient if the message is
# from you
#
# %X
# number of attachments (please see the ``attachments'' section
# for possible speed effects)
#
# %y
# `x-label:' field, if present
#
# %Y
# `x-label' field, if present, and (1) not at part of a thread
# tree, (2) at the top of a thread, or (3) `x-label' is different
# from preceding message's `x-label'.
#
# %Z
# message status flags
#
# %{fmt}
# the date and time of the message is converted to sender's time
# zone, and ``fmt'' is expanded by the library function
# ``strftime''; a leading bang disables locales
#
# %[fmt]
# the date and time of the message is converted to the local time
# zone, and ``fmt'' is expanded by the library function
# ``strftime''; a leading bang disables locales
#
# %(fmt)
# the local date and time when the message was received. ``fmt''
# is expanded by the library function ``strftime''; a leading
# bang disables locales
#
# %<fmt>
# the current local time. ``fmt'' is expanded by the library
# function ``strftime''; a leading bang disables locales.
#
# %>X
# right justify the rest of the string and pad with character "X"
#
# %|X
# pad to the end of the line with character "X"
#
# See also: ``$to_chars''.
#
# set index_format = '%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s'
#
##########
# ispell
#
# Type: path
# Default: "ispell"
#
# How to invoke ispell (GNU's spell-checking software).
#
# set ispell = '/usr/bin/ispell'
#
##########
# keep_flagged
#
# Type: boolean
# Default: no
#
# If set, read messages marked as flagged will not be moved from your
# spool mailbox to your ``$mbox'' mailbox, or as a result of a
# ``mbox-hook'' command.
#
# set keep_flagged = no
#
##########
# locale
#
# Type: string
# Default: "C"
#
# The locale used by strftime(3) to format dates. Legal values are the
# strings your system accepts for the locale variable LC_TIME.
#
# set locale = 'C'
#
##########
# mail_check
#
# Type: number
# Default: 5
#
# This variable configures how often (in seconds) mutt should look for
# new mail.
#
# set mail_check = '5'
#
##########
# mailcap_path
#
# Type: string
# Default: ""
#
# This variable specifies which files to consult when attempting to
# display MIME bodies not directly supported by Mutt.
#
# set mailcap_path = ''
#
##########
# mailcap_sanitize
#
# Type: boolean
# Default: yes
#
# If set, mutt will restrict possible characters in mailcap % expandos
# to a well-defined set of safe characters. This is the safe setting,
# but we are not sure it doesn't break some more advanced MIME stuff.
#
# DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE
# DOING!
#
# set mailcap_sanitize = yes
#
##########
# header_cache
#
# Type: path
# Default: ""
#
# The header_cache variable points to the header cache database. If
# header_cache points to a directory it will contain a header cache
# database per folder. If header_cache points to a file that file will
# be a single global header cache. By default it is unset so no header
# caching will be used.
#
# set header_cache = ''
#
##########
# maildir_header_cache_verify
#
# Type: boolean
# Default: yes
#
# Check for Maildir unaware programs other than mutt having modified
# maildir files when the header cache is in use. This incurs one stat(2)
# per message every time the folder is opened.
#
# set maildir_header_cache_verify = yes
#
##########
# header_cache_pagesize
#
# Type: string
# Default: "16384"
#
# When mutt is compiled with either gdbm or bdb4 as the header cache
# backend, this option changes the database page size. Too large or too
# small values can waste space, memory, or CPU time. The default should
# be more or less optimal for most use cases.
#
# set header_cache_pagesize = '16384'
#
##########
# header_cache_compress
#
# Type: boolean
# Default: no
#
# When mutt is compiled with qdbm as header cache backend, this option
# determines whether the database will be compressed. Compression
# results in database files roughly being one fifth of the usual
# diskspace, but the uncompression can result in a slower opening of
# cached folder(s).
#
# set header_cache_compress = no
#
##########
# maildir_trash
#
# Type: boolean
# Default: no
#
# If set, messages marked as deleted will be saved with the maildir
# (T)rashed flag instead of unlinked. NOTE: this only applies to
# maildir-style mailboxes. Setting it will have no effect on other
# mailbox types.
#
# set maildir_trash = no
#
##########
# mark_old
#
# Type: boolean
# Default: yes
#
# Controls whether or not mutt marks new unread messages as old if you
# exit a mailbox without reading them. With this option set, the next
# time you start mutt, the messages will show up with an "O" next to
# them in the index menu, indicating that they are old.
#
# set mark_old = yes
#
##########
# markers
#
# Type: boolean
# Default: yes
#
# Controls the display of wrapped lines in the internal pager. If set, a
# ``+'' marker is displayed at the beginning of wrapped lines. Also see
# the ``$smart_wrap'' variable.
#
# set markers = yes
#
##########
# mask
#
# Type: regular expression
# Default: "!^\.[^.]"
#
# A regular expression used in the file browser, optionally preceded by
# the not operator ``!''. Only files whose names match this mask will be
# shown. The match is always case-sensitive.
#
# set mask = '!^\.[^.]'
#
##########
# mbox
#
# Type: path
# Default: "~/mbox"
#
# This specifies the folder into which read mail in your ``$spoolfile''
# folder will be appended.
#
# set mbox = '~/mbox'
#
##########
# mbox_type
#
# Type: folder magic
# Default: mbox
#
# The default mailbox type used when creating new folders. May be any of
# mbox, MMDF, MH and Maildir.
#
# set mbox_type = 'mbox'
#
##########
# metoo
#
# Type: boolean
# Default: no
#
# If unset, Mutt will remove your address (see the ``alternates''
# command) from the list of recipients when replying to a message.
#
# set metoo = no
#
##########
# menu_context
#
# Type: number
# Default: 0
#
# This variable controls the number of lines of context that are given
# when scrolling through menus. (Similar to ``$pager_context''.)
#
# set menu_context = '0'
#
##########
# menu_move_off
#
# Type: boolean
# Default: yes
#
# When unset, the bottom entry of menus will never scroll up past the
# bottom of the screen, unless there are less entries than lines. When
# set, the bottom entry may move off the bottom.
#
# set menu_move_off = yes
#
##########
# menu_scroll
#
# Type: boolean
# Default: no
#
# When set, menus will be scrolled up or down one line when you attempt
# to move across a screen boundary. If unset, the screen is cleared and
# the next or previous page of the menu is displayed (useful for slow
# links to avoid many redraws).
#
# set menu_scroll = no
#
##########
# meta_key
#
# Type: boolean
# Default: no
#
# If set, forces Mutt to interpret keystrokes with the high bit (bit 8)
# set as if the user had pressed the ESC key and whatever key remains
# after having the high bit removed. For example, if the key pressed has
# an ASCII value of 0xf8, then this is treated as if the user had
# pressed ESC then ``x''. This is because the result of removing the
# high bit from ``0xf8'' is ``0x78'', which is the ASCII character
# ``x''.
#
# set meta_key = no
#
##########
# mh_purge
#
# Type: boolean
# Default: no
#
# When unset, mutt will mimic mh's behaviour and rename deleted messages
# to ,<old file name> in mh folders instead of really deleting them. If
# the variable is set, the message files will simply be deleted.
#
# set mh_purge = no
#
##########
# mh_seq_flagged
#
# Type: string
# Default: "flagged"
#
# The name of the MH sequence used for flagged messages.
#
# set mh_seq_flagged = 'flagged'
#
##########
# mh_seq_replied
#
# Type: string
# Default: "replied"
#
# The name of the MH sequence used to tag replied messages.
#
# set mh_seq_replied = 'replied'
#
##########
# mh_seq_unseen
#
# Type: string
# Default: "unseen"
#
# The name of the MH sequence used for unseen messages.
#
# set mh_seq_unseen = 'unseen'
#
##########
# mime_forward
#
# Type: quadoption
# Default: no
#
# When set, the message you are forwarding will be attached as a
# separate MIME part instead of included in the main body of the
# message. This is useful for forwarding MIME messages so the receiver
# can properly view the message as it was delivered to you. If you like
# to switch between MIME and not MIME from mail to mail, set this
# variable to ask-no or ask-yes.
#
# Also see ``$forward_decode'' and ``$mime_forward_decode''.
#
# set mime_forward = no
#
##########
# mime_forward_decode
#
# Type: boolean
# Default: no
#
# Controls the decoding of complex MIME messages into text/plain when
# forwarding a message while ``$mime_forward'' is set. Otherwise
# ``$forward_decode'' is used instead.
#
# set mime_forward_decode = no
#
##########
# mime_forward_rest
#
# Type: quadoption
# Default: yes
#
# When forwarding multiple attachments of a MIME message from the
# recvattach menu, attachments which cannot be decoded in a reasonable
# manner will be attached to the newly composed message if this option
# is set.
#
# set mime_forward_rest = yes
#
##########
# mix_entry_format
#
# Type: string
# Default: "%4n %c %-16s %a"
#
# This variable describes the format of a remailer line on the mixmaster
# chain selection screen. The following printf-like sequences are
# supported:
#
# %n
# The running number on the menu.
#
# %c
# Remailer capabilities.
#
# %s
# The remailer's short name.
#
# %a
# The remailer's e-mail address.
#
# set mix_entry_format = '%4n %c %-16s %a'
#
##########
# mixmaster
#
# Type: path
# Default: "mixmaster"
#
# This variable contains the path to the Mixmaster binary on your
# system. It is used with various sets of parameters to gather the list
# of known remailers, and to finally send a message through the
# mixmaster chain.
#
# set mixmaster = 'mixmaster'
#
##########
# move
#
# Type: quadoption
# Default: ask-no
#
# Controls whether or not Mutt will move read messages from your spool
# mailbox to your ``$mbox'' mailbox, or as a result of a ``mbox-hook''
# command.
#
# set move = ask-no
#
##########
# message_cachedir
#
# Type: path
# Default: ""
#
# Set this to a directory and mutt will cache copies of messages from
# your IMAP and POP servers here. You are free to remove entries at any
# time, for instance if stale entries accumulate because you have
# deleted messages with another mail client.
#
# set message_cachedir = ''
#
##########
# message_format
#
# Type: string
# Default: "%s"
#
# This is the string displayed in the ``attachment'' menu for
# attachments of type message/rfc822. For a full listing of defined
# printf()-like sequences see the section on ``$index_format''.
#
# set message_format = '%s'
#
##########
# narrow_tree
#
# Type: boolean
# Default: no
#
# This variable, when set, makes the thread tree narrower, allowing
# deeper threads to fit on the screen.
#
# set narrow_tree = no
#
##########
# net_inc
#
# Type: number
# Default: 10
#
# Operations that expect to transfer a large amount of data over the
# network will update their progress every net_inc kilobytes. If set to
# 0, no progress messages will be displayed.
#
# See also ``$read_inc'' and ``$write_inc''.
#
# set net_inc = '10'
#
##########
# pager
#
# Type: path
# Default: "builtin"
#
# This variable specifies which pager you would like to use to view
# messages. builtin means to use the builtin pager, otherwise this
# variable should specify the pathname of the external pager you would
# like to use.
#
# Using an external pager may have some disadvantages: Additional
# keystrokes are necessary because you can't call mutt functions
# directly from the pager, and screen resizes cause lines longer than
# the screen width to be badly formatted in the help menu.
#
# set pager = 'builtin'
#
##########
# pager_context
#
# Type: number
# Default: 0
#
# This variable controls the number of lines of context that are given
# when displaying the next or previous page in the internal pager. By
# default, Mutt will display the line after the last one on the screen
# at the top of the next page (0 lines of context).
#
# set pager_context = '0'
#
##########
# pager_format
#
# Type: string
# Default: "-%Z- %C/%m: %-20.20n %s"
#
# This variable controls the format of the one-line message ``status''
# displayed before each message in either the internal or an external
# pager. The valid sequences are listed in the ``$index_format''
# section.
#
# set pager_format = '-%Z- %C/%m: %-20.20n %s'
#
##########
# pager_index_lines
#
# Type: number
# Default: 0
#
# Determines the number of lines of a mini-index which is shown when in
# the pager. The current message, unless near the top or bottom of the
# folder, will be roughly one third of the way down this mini-index,
# giving the reader the context of a few messages before and after the
# message. This is useful, for example, to determine how many messages
# remain to be read in the current thread. One of the lines is reserved
# for the status bar from the index, so a pager_index_lines of 6 will
# only show 5 lines of the actual index. A value of 0 results in no
# index being shown. If the number of messages in the current folder is
# less than pager_index_lines, then the index will only use as many
# lines as it needs.
#
# set pager_index_lines = '0'
#
##########
# pager_stop
#
# Type: boolean
# Default: no
#
# When set, the internal-pager will not move to the next message when
# you are at the end of a message and invoke the next-page function.
#
# set pager_stop = no
#
##########
# crypt_autosign
#
# Type: boolean
# Default: no
#
# Setting this variable will cause Mutt to always attempt to
# cryptographically sign outgoing messages. This can be overridden by
# use of the pgp-menu, when signing is not required or encryption is
# requested as well. If ``$smime_is_default'' is set, then OpenSSL is
# used instead to create S/MIME messages and settings can be overridden
# by use of the smime-menu. (Crypto only)
#
# set crypt_autosign = no
#
##########
# crypt_autoencrypt
#
# Type: boolean
# Default: no
#
# Setting this variable will cause Mutt to always attempt to PGP encrypt
# outgoing messages. This is probably only useful in connection to the
# send-hook command. It can be overridden by use of the pgp-menu, when
# encryption is not required or signing is requested as well. IF
# ``$smime_is_default'' is set, then OpenSSL is used instead to create
# S/MIME messages and settings can be overridden by use of the
# smime-menu. (Crypto only)
#
# set crypt_autoencrypt = no
#
##########
# pgp_ignore_subkeys
#
# Type: boolean
# Default: yes
#
# Setting this variable will cause Mutt to ignore OpenPGP subkeys.
# Instead, the principal key will inherit the subkeys' capabilities.
# Unset this if you want to play interesting key selection games. (PGP
# only)
#
# set pgp_ignore_subkeys = yes
#
##########
# crypt_replyencrypt
#
# Type: boolean
# Default: yes
#
# If set, automatically PGP or OpenSSL encrypt replies to messages which
# are encrypted. (Crypto only)
#
# set crypt_replyencrypt = yes
#
##########
# crypt_replysign
#
# Type: boolean
# Default: no
#
# If set, automatically PGP or OpenSSL sign replies to messages which
# are signed.
#
# Note: this does not work on messages that are encrypted and signed!
# (Crypto only)
#
# set crypt_replysign = no
#
##########
# crypt_replysignencrypted
#
# Type: boolean
# Default: no
#
# If set, automatically PGP or OpenSSL sign replies to messages which
# are encrypted. This makes sense in combination with
# ``$crypt_replyencrypt'', because it allows you to sign all messages
# which are automatically encrypted. This works around the problem noted
# in ``$crypt_replysign'', that mutt is not able to find out whether an
# encrypted message is also signed. (Crypto only)
#
# set crypt_replysignencrypted = no
#
##########
# crypt_timestamp
#
# Type: boolean
# Default: yes
#
# If set, mutt will include a time stamp in the lines surrounding PGP or
# S/MIME output, so spoofing such lines is more difficult. If you are
# using colors to mark these lines, and rely on these, you may unset
# this setting. (Crypto only)
#
# set crypt_timestamp = yes
#
##########
# pgp_use_gpg_agent
#
# Type: boolean
# Default: no
#
# If set, mutt will use a possibly-running gpg-agent process. (PGP only)
#
# set pgp_use_gpg_agent = no
#
##########
# crypt_verify_sig
#
# Type: quadoption
# Default: yes
#
# If ``yes'', always attempt to verify PGP or S/MIME signatures. If
# ``ask'', ask whether or not to verify the signature. If ``no'', never
# attempt to verify cryptographic signatures. (Crypto only)
#
# set crypt_verify_sig = yes
#
##########
# smime_is_default
#
# Type: boolean
# Default: no
#
# The default behaviour of mutt is to use PGP on all
# auto-sign/encryption operations. To override and to use OpenSSL
# instead this must be set. However, this has no effect while replying,
# since mutt will automatically select the same application that was
# used to sign/encrypt the original message. (Note that this variable
# can be overridden by unsetting $crypt_autosmime.) (S/MIME only)
#
# set smime_is_default = no
#
##########
# smime_ask_cert_label
#
# Type: boolean
# Default: yes
#
# This flag controls whether you want to be asked to enter a label for a
# certificate about to be added to the database or not. It is set by
# default. (S/MIME only)
#
# set smime_ask_cert_label = yes
#
##########
# smime_decrypt_use_default_key
#
# Type: boolean
# Default: yes
#
# If set (default) this tells mutt to use the default key for
# decryption. Otherwise, if manage multiple certificate-key-pairs, mutt
# will try to use the mailbox-address to determine the key to use. It
# will ask you to supply a key, if it can't find one. (S/MIME only)
#
# set smime_decrypt_use_default_key = yes
#
##########
# pgp_entry_format
#
# Type: string
# Default: "%4n %t%f %4l/0x%k %-4a %2c %u"
#
# This variable allows you to customize the PGP key selection menu to
# your personal taste. This string is similar to ``$index_format'', but
# has its own set of printf()-like sequences:
#
# %n
# number
#
# %k
# key id
#
# %u
# user id
#
# %a
# algorithm
#
# %l
# key length
#
# %f
# flags
#
# %c
# capabilities
#
# %t
# trust/validity of the key-uid association
#
# %[<s>]
# date of the key where <s> is an strftime(3) expression
#
# (PGP only)
#
# set pgp_entry_format = '%4n %t%f %4l/0x%k %-4a %2c %u'
#
##########
# pgp_good_sign
#
# Type: regular expression
# Default: ""
#
# If you assign a text to this variable, then a PGP signature is only
# considered verified if the output from $pgp_verify_command contains
# the text. Use this variable if the exit code from the command is 0
# even for bad signatures. (PGP only)
#
# set pgp_good_sign = ''
#
##########
# pgp_check_exit
#
# Type: boolean
# Default: yes
#
# If set, mutt will check the exit code of the PGP subprocess when
# signing or encrypting. A non-zero exit code means that the subprocess
# failed. (PGP only)
#
# set pgp_check_exit = yes
#
##########
# pgp_long_ids
#
# Type: boolean
# Default: no
#
# If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs.
# (PGP only)
#
# set pgp_long_ids = no
#
##########
# pgp_retainable_sigs
#
# Type: boolean
# Default: no
#
# If set, signed and encrypted messages will consist of nested
# multipart/signed and multipart/encrypted body parts.
#
# This is useful for applications like encrypted and signed mailing
# lists, where the outer layer (multipart/encrypted) can be easily
# removed, while the inner multipart/signed part is retained. (PGP only)
#
# set pgp_retainable_sigs = no
#
##########
# pgp_autoinline
#
# Type: boolean
# Default: no
#
# This option controls whether Mutt generates old-style inline
# (traditional) PGP encrypted or signed messages under certain
# circumstances. This can be overridden by use of the pgp-menu, when
# inline is not required.
#
# Note that Mutt might automatically use PGP/MIME for messages which
# consist of more than a single MIME part. Mutt can be configured to ask
# before sending PGP/MIME messages when inline (traditional) would not
# work. See also: ``$pgp_mime_auto''.
#
# Also note that using the old-style PGP message format is strongly
# deprecated. (PGP only)
#
# set pgp_autoinline = no
#
##########
# pgp_replyinline
#
# Type: boolean
# Default: no
#
# Setting this variable will cause Mutt to always attempt to create an
# inline (traditional) message when replying to a message which is PGP
# encrypted/signed inline. This can be overridden by use of the
# pgp-menu, when inline is not required. This option does not
# automatically detect if the (replied-to) message is inline; instead it
# relies on Mutt internals for previously checked/flagged messages.
#
# Note that Mutt might automatically use PGP/MIME for messages which
# consist of more than a single MIME part. Mutt can be configured to ask
# before sending PGP/MIME messages when inline (traditional) would not
# work. See also: ``$pgp_mime_auto''.
#
# Also note that using the old-style PGP message format is strongly
# deprecated. (PGP only)
#
# set pgp_replyinline = no
#
##########
# pgp_show_unusable
#
# Type: boolean
# Default: yes
#
# If set, mutt will display non-usable keys on the PGP key selection
# menu. This includes keys which have been revoked, have expired, or
# have been marked as ``disabled'' by the user. (PGP only)
#
# set pgp_show_unusable = yes
#
##########
# pgp_sign_as
#
# Type: string
# Default: ""
#
# If you have more than one key pair, this option allows you to specify
# which of your private keys to use. It is recommended that you use the
# keyid form to specify your key (e.g., ``0x00112233''). (PGP only)
#
# set pgp_sign_as = ''
#
##########
# pgp_strict_enc
#
# Type: boolean
# Default: yes
#
# If set, Mutt will automatically encode PGP/MIME signed messages as
# quoted-printable. Please note that unsetting this variable may lead to
# problems with non-verifyable PGP signatures, so only change this if
# you know what you are doing. (PGP only)
#
# set pgp_strict_enc = yes
#
##########
# pgp_timeout
#
# Type: number
# Default: 300
#
# The number of seconds after which a cached passphrase will expire if
# not used. (PGP only)
#
# set pgp_timeout = '300'
#
##########
# pgp_sort_keys
#
# Type: sort order
# Default: address
#
# Specifies how the entries in the `pgp keys' menu are sorted. The
# following are legal values:
#
# address
# sort alphabetically by user id
#
# keyid
# sort alphabetically by key id
#
# date
# sort by key creation date
#
# trust
# sort by the trust of the key
#
# If you prefer reverse order of the above values, prefix it with
# `reverse-'. (PGP only)
#
# set pgp_sort_keys = 'address'
#
##########
# pgp_mime_auto
#
# Type: quadoption
# Default: ask-yes
#
# This option controls whether Mutt will prompt you for automatically
# sending a (signed/encrypted) message using PGP/MIME when inline
# (traditional) fails (for any reason).
#
# Also note that using the old-style PGP message format is strongly
# deprecated. (PGP only)
#
# set pgp_mime_auto = ask-yes
#
##########
# pgp_auto_decode
#
# Type: boolean
# Default: no
#
# If set, mutt will automatically attempt to decrypt traditional PGP
# messages whenever the user performs an operation which ordinarily
# would result in the contents of the message being operated on. For
# example, if the user displays a pgp-traditional message which has not
# been manually checked with the check-traditional-pgp function, mutt
# will automatically check the message for traditional pgp.
#
# set pgp_auto_decode = no
#
##########
# pgp_decode_command
#
# Type: string
# Default: ""
#
# This format strings specifies a command which is used to decode
# application/pgp attachments.
#
# The PGP command formats have their own set of printf-like sequences:
#
# %p
# Expands to PGPPASSFD=0 when a pass phrase is needed, to an
# empty string otherwise. Note: This may be used with a %?
# construct.
#
# %f
# Expands to the name of a file containing a message.
#
# %s
# Expands to the name of a file containing the signature part of
# a multipart/signed attachment when verifying it.
#
# %a
# The value of $pgp_sign_as.
#
# %r
# One or more key IDs.
#
# For examples on how to configure these formats for the various
# versions of PGP which are floating around, see the pgp*.rc and gpg.rc
# files in the samples/ subdirectory which has been installed on your
# system alongside the documentation. (PGP only)
#
# set pgp_decode_command = ''
#
##########
# pgp_getkeys_command
#
# Type: string
# Default: ""
#
# This command is invoked whenever mutt will need public key
# information. %r is the only printf-like sequence used with this
# format. (PGP only)
#
# set pgp_getkeys_command = ''
#
##########
# pgp_verify_command
#
# Type: string
# Default: ""
#
# This command is used to verify PGP signatures. (PGP only)
#
# set pgp_verify_command = ''
#
##########
# pgp_decrypt_command
#
# Type: string
# Default: ""
#
# This command is used to decrypt a PGP encrypted message. (PGP only)
#
# set pgp_decrypt_command = ''
#
##########
# pgp_clearsign_command
#
# Type: string
# Default: ""
#
# This format is used to create a old-style "clearsigned" PGP message.
# Note that the use of this format is strongly deprecated. (PGP only)
#
# set pgp_clearsign_command = ''
#
##########
# pgp_sign_command
#
# Type: string
# Default: ""
#
# This command is used to create the detached PGP signature for a
# multipart/signed PGP/MIME body part. (PGP only)
#
# set pgp_sign_command = ''
#
##########
# pgp_encrypt_sign_command
#
# Type: string
# Default: ""
#
# This command is used to both sign and encrypt a body part. (PGP only)
#
# set pgp_encrypt_sign_command = ''
#
##########
# pgp_encrypt_only_command
#
# Type: string
# Default: ""
#
# This command is used to encrypt a body part without signing it. (PGP
# only)
#
# set pgp_encrypt_only_command = ''
#
##########
# pgp_import_command
#
# Type: string
# Default: ""
#
# This command is used to import a key from a message into the user's
# public key ring. (PGP only)
#
# set pgp_import_command = ''
#
##########
# pgp_export_command
#
# Type: string
# Default: ""
#
# This command is used to export a public key from the user's key ring.
# (PGP only)
#
# set pgp_export_command = ''
#
##########
# pgp_verify_key_command
#
# Type: string
# Default: ""
#
# This command is used to verify key information from the key selection
# menu. (PGP only)
#
# set pgp_verify_key_command = ''
#
##########
# pgp_list_secring_command
#
# Type: string
# Default: ""
#
# This command is used to list the secret key ring's contents. The
# output format must be analogous to the one used by gpg --list-keys
# --with-colons.
#
# This format is also generated by the pgpring utility which comes with
# mutt. (PGP only)
#
# set pgp_list_secring_command = ''
#
##########
# pgp_list_pubring_command
#
# Type: string
# Default: ""
#
# This command is used to list the public key ring's contents. The
# output format must be analogous to the one used by gpg --list-keys
# --with-colons.
#
# This format is also generated by the pgpring utility which comes with
# mutt. (PGP only)
#
# set pgp_list_pubring_command = ''
#
##########
# forward_decrypt
#
# Type: boolean
# Default: yes
#
# Controls the handling of encrypted messages when forwarding a message.
# When set, the outer layer of encryption is stripped off. This variable
# is only used if ``$mime_forward'' is set and ``$mime_forward_decode''
# is unset. (PGP only)
#
# set forward_decrypt = yes
#
##########
# smime_timeout
#
# Type: number
# Default: 300
#
# The number of seconds after which a cached passphrase will expire if
# not used. (S/MIME only)
#
# set smime_timeout = '300'
#
##########
# smime_encrypt_with
#
# Type: string
# Default: ""
#
# This sets the algorithm that should be used for encryption. Valid
# choices are "des", "des3", "rc2-40", "rc2-64", "rc2-128". If unset
# "3des" (TripleDES) is used. (S/MIME only)
#
# set smime_encrypt_with = ''
#
##########
# smime_keys
#
# Type: path
# Default: ""
#
# Since there is no pubring/secring as with PGP, mutt has to handle
# storage ad retrieval of keys/certs by itself. This is very basic right
# now, and stores keys and certificates in two different directories,
# both named as the hash-value retrieved from OpenSSL. There is an index
# file which contains mailbox-address keyid pair, and which can be
# manually edited. This one points to the location of the private keys.
# (S/MIME only)
#
# set smime_keys = ''
#
##########
# smime_ca_location
#
# Type: path
# Default: ""
#
# This variable contains the name of either a directory, or a file which
# contains trusted certificates for use with OpenSSL. (S/MIME only)
#
# set smime_ca_location = ''
#
##########
# smime_certificates
#
# Type: path
# Default: ""
#
# Since there is no pubring/secring as with PGP, mutt has to handle
# storage and retrieval of keys by itself. This is very basic right now,
# and keys and certificates are stored in two different directories,
# both named as the hash-value retrieved from OpenSSL. There is an index
# file which contains mailbox-address keyid pairs, and which can be
# manually edited. This one points to the location of the certificates.
# (S/MIME only)
#
# set smime_certificates = ''
#
##########
# smime_decrypt_command
#
# Type: string
# Default: ""
#
# This format string specifies a command which is used to decrypt
# application/x-pkcs7-mime attachments.
#
# The OpenSSL command formats have their own set of printf-like
# sequences similar to PGP's:
#
# %f
# Expands to the name of a file containing a message.
#
# %s
# Expands to the name of a file containing the signature part of
# a multipart/signed attachment when verifying it.
#
# %k
# The key-pair specified with $smime_default_key
#
# %c
# One or more certificate IDs.
#
# %a
# The algorithm used for encryption.
#
# %C
# CA location: Depending on whether $smime_ca_location points to
# a directory or file, this expands to "-CApath
# $smime_ca_location" or "-CAfile $smime_ca_location".
#
# For examples on how to configure these formats, see the smime.rc in
# the samples/ subdirectory which has been installed on your system
# alongside the documentation. (S/MIME only)
#
# set smime_decrypt_command = ''
#
##########
# smime_verify_command
#
# Type: string
# Default: ""
#
# This command is used to verify S/MIME signatures of type
# multipart/signed. (S/MIME only)
#
# set smime_verify_command = ''
#
##########
# smime_verify_opaque_command
#
# Type: string
# Default: ""
#
# This command is used to verify S/MIME signatures of type
# application/x-pkcs7-mime. (S/MIME only)
#
# set smime_verify_opaque_command = ''
#
##########
# smime_sign_command
#
# Type: string
# Default: ""
#
# This command is used to created S/MIME signatures of type
# multipart/signed, which can be read by all mail clients. (S/MIME only)
#
# set smime_sign_command = ''
#
##########
# smime_sign_opaque_command
#
# Type: string
# Default: ""
#
# This command is used to created S/MIME signatures of type
# application/x-pkcs7-signature, which can only be handled by mail
# clients supporting the S/MIME extension. (S/MIME only)
#
# set smime_sign_opaque_command = ''
#
##########
# smime_encrypt_command
#
# Type: string
# Default: ""
#
# This command is used to create encrypted S/MIME messages. (S/MIME
# only)
#
# set smime_encrypt_command = ''
#
##########
# smime_pk7out_command
#
# Type: string
# Default: ""
#
# This command is used to extract PKCS7 structures of S/MIME signatures,
# in order to extract the public X509 certificate(s). (S/MIME only)
#
# set smime_pk7out_command = ''
#
##########
# smime_get_cert_command
#
# Type: string
# Default: ""
#
# This command is used to extract X509 certificates from a PKCS7
# structure. (S/MIME only)
#
# set smime_get_cert_command = ''
#
##########
# smime_get_signer_cert_command
#
# Type: string
# Default: ""
#
# This command is used to extract only the signers X509 certificate from
# a S/MIME signature, so that the certificate's owner may get compared
# to the email's 'From'-field. (S/MIME only)
#
# set smime_get_signer_cert_command = ''
#
##########
# smime_import_cert_command
#
# Type: string
# Default: ""
#
# This command is used to import a certificate via smime_keys. (S/MIME
# only)
#
# set smime_import_cert_command = ''
#
##########
# smime_get_cert_email_command
#
# Type: string
# Default: ""
#
# This command is used to extract the mail address(es) used for storing
# X509 certificates, and for verification purposes (to check whether the
# certificate was issued for the sender's mailbox). (S/MIME only)
#
# set smime_get_cert_email_command = ''
#
##########
# smime_default_key
#
# Type: string
# Default: ""
#
# This is the default key-pair to use for signing. This must be set to
# the keyid (the hash-value that OpenSSL generates) to work properly
# (S/MIME only)
#
# set smime_default_key = ''
#
##########
# ssl_client_cert
#
# Type: path
# Default: ""
#
# The file containing a client certificate and its associated private
# key.
#
# set ssl_client_cert = ''
#
##########
# ssl_force_tls
#
# Type: boolean
# Default: no
#
# If this variable is set, Mutt will require that all connections to
# remote servers be encrypted. Furthermore it will attempt to negotiate
# TLS even if the server does not advertise the capability, since it
# would otherwise have to abort the connection anyway. This option
# supersedes ``$ssl_starttls''.
#
# set ssl_force_tls = no
#
##########
# ssl_starttls
#
# Type: quadoption
# Default: yes
#
# If set (the default), mutt will attempt to use STARTTLS on servers
# advertising the capability. When unset, mutt will not attempt to use
# STARTTLS regardless of the server's capabilities.
#
# set ssl_starttls = yes
#
##########
# certificate_file
#
# Type: path
# Default: "~/.mutt_certificates"
#
# This variable specifies the file where the certificates you trust are
# saved. When an unknown certificate is encountered, you are asked if
# you accept it or not. If you accept it, the certificate can also be
# saved in this file and further connections are automatically accepted.
#
# You can also manually add CA certificates in this file. Any server
# certificate that is signed with one of these CA certificates are also
# automatically accepted.
#
# Example: set certificate_file=~/.mutt/certificates
#
# set certificate_file = '~/.mutt_certificates'
#
##########
# ssl_usesystemcerts
#
# Type: boolean
# Default: yes
#
# If set to yes, mutt will use CA certificates in the system-wide
# certificate store when checking if server certificate is signed by a
# trusted CA.
#
# set ssl_usesystemcerts = yes
#
##########
# entropy_file
#
# Type: path
# Default: ""
#
# The file which includes random data that is used to initialize SSL
# library functions.
#
# set entropy_file = ''
#
##########
# ssl_use_sslv2
#
# Type: boolean
# Default: yes
#
# This variables specifies whether to attempt to use SSLv2 in the SSL
# authentication process.
#
# set ssl_use_sslv2 = yes
#
##########
# ssl_use_sslv3
#
# Type: boolean
# Default: yes
#
# This variables specifies whether to attempt to use SSLv3 in the SSL
# authentication process.
#
# set ssl_use_sslv3 = yes
#
##########
# ssl_use_tlsv1
#
# Type: boolean
# Default: yes
#
# This variables specifies whether to attempt to use TLSv1 in the SSL
# authentication process.
#
# set ssl_use_tlsv1 = yes
#
##########
# ssl_min_dh_prime_bits
#
# Type: number
# Default: 0
#
# This variable specifies the minimum acceptable prime size (in bits)
# for use in any Diffie-Hellman key exchange. A value of 0 will use the
# default from the GNUTLS library.
#
# set ssl_min_dh_prime_bits = '0'
#
##########
# ssl_ca_certificates_file
#
# Type: path
# Default: ""
#
# This variable specifies a file containing trusted CA certificates. Any
# server certificate that is signed with one of these CA certificates
# are also automatically accepted.
#
# Example: set
# ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
#
# set ssl_ca_certificates_file = ''
#
##########
# pipe_split
#
# Type: boolean
# Default: no
#
# Used in connection with the pipe-message command and the ``tag-
# prefix'' operator. If this variable is unset, when piping a list of
# tagged messages Mutt will concatenate the messages and will pipe them
# as a single folder. When set, Mutt will pipe the messages one by one.
# In both cases the messages are piped in the current sorted order, and
# the ``$pipe_sep'' separator is added after each message.
#
# set pipe_split = no
#
##########
# pipe_decode
#
# Type: boolean
# Default: no
#
# Used in connection with the pipe-message command. When unset, Mutt
# will pipe the messages without any preprocessing. When set, Mutt will
# weed headers and will attempt to PGP/MIME decode the messages first.
#
# set pipe_decode = no
#
##########
# pipe_sep
#
# Type: string
# Default: "\n"
#
# The separator to add between messages when piping a list of tagged
# messages to an external Unix command.
#
# set pipe_sep = '\n'
#
##########
# pop_authenticators
#
# Type: string
# Default: ""
#
# This is a colon-delimited list of authentication methods mutt may
# attempt to use to log in to an POP server, in the order mutt should
# try them. Authentication methods are either 'user', 'apop' or any SASL
# mechanism, eg 'digest-md5', 'gssapi' or 'cram-md5'. This parameter is
# case-insensitive. If this parameter is unset (the default) mutt will
# try all available methods, in order from most-secure to least-secure.
#
# Example: set pop_authenticators="digest-md5:apop:user"
#
# set pop_authenticators = ''
#
##########
# pop_auth_try_all
#
# Type: boolean
# Default: yes
#
# If set, Mutt will try all available methods. When unset, Mutt will
# only fall back to other authentication methods if the previous methods
# are unavailable. If a method is available but authentication fails,
# Mutt will not connect to the POP server.
#
# set pop_auth_try_all = yes
#
##########
# pop_checkinterval
#
# Type: number
# Default: 60
#
# This variable configures how often (in seconds) mutt should look for
# new mail in the currently selected mailbox if it is a POP mailbox.
#
# set pop_checkinterval = '60'
#
##########
# pop_delete
#
# Type: quadoption
# Default: ask-no
#
# If set, Mutt will delete successfully downloaded messages from the POP
# server when using the fetch-mail function. When unset, Mutt will
# download messages but also leave them on the POP server.
#
# set pop_delete = ask-no
#
##########
# pop_host
#
# Type: string
# Default: ""
#
# The name of your POP server for the fetch-mail function. You can also
# specify an alternative port, username and password, ie:
#
# [pop[s]://][username[:password]@]popserver[:port]
#
# set pop_host = ''
#
##########
# pop_last
#
# Type: boolean
# Default: no
#
# If this variable is set, mutt will try to use the "LAST" POP command
# for retrieving only unread messages from the POP server when using the
# fetch-mail function.
#
# set pop_last = no
#
##########
# pop_reconnect
#
# Type: quadoption
# Default: ask-yes
#
# Controls whether or not Mutt will try to reconnect to POP server if
# the connection is lost.
#
# set pop_reconnect = ask-yes
#
##########
# pop_user
#
# Type: string
# Default: ""
#
# Your login name on the POP server.
#
# This variable defaults to your user name on the local machine.
#
# set pop_user = ''
#
##########
# pop_pass
#
# Type: string
# Default: ""
#
# Specifies the password for your POP account. If unset, Mutt will
# prompt you for your password when you open POP mailbox. Warning: you
# should only use this option when you are on a fairly secure machine,
# because the superuser can read your muttrc even if you are the only
# one who can read the file.
#
# set pop_pass = ''
#
##########
# post_indent_string
#
# Type: string
# Default: ""
#
# Similar to the ``$attribution'' variable, Mutt will append this string
# after the inclusion of a message which is being replied to.
#
# set post_indent_string = ''
#
##########
# postpone
#
# Type: quadoption
# Default: ask-yes
#
# Controls whether or not messages are saved in the ``$postponed''
# mailbox when you elect not to send immediately.
#
# set postpone = ask-yes
#
##########
# postponed
#
# Type: path
# Default: "~/postponed"
#
# Mutt allows you to indefinitely ``postpone sending a message'' which
# you are editing. When you choose to postpone a message, Mutt saves it
# in the mailbox specified by this variable. Also see the ``$postpone''
# variable.
#
# set postponed = '~/postponed'
#
##########
# preconnect
#
# Type: string
# Default: ""
#
# If set, a shell command to be executed if mutt fails to establish a
# connection to the server. This is useful for setting up secure
# connections, e.g. with ssh(1). If the command returns a nonzero
# status, mutt gives up opening the server. Example:
#
# preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net sleep 20 <
# /dev/null > /dev/null"
#
# Mailbox 'foo' on mailhost.net can now be reached as
# '{localhost:1234}foo'.
#
# NOTE: For this example to work, you must be able to log in to the
# remote machine without having to enter a password.
#
# set preconnect = ''
#
##########
# print
#
# Type: quadoption
# Default: ask-no
#
# Controls whether or not Mutt really prints messages. This is set to
# ask-no by default, because some people accidentally hit ``p'' often
# (like me).
#
# set print = ask-no
#
##########
# print_command
#
# Type: path
# Default: "lpr"
#
# This specifies the command pipe that should be used to print messages.
#
# set print_command = 'lpr'
#
##########
# print_decode
#
# Type: boolean
# Default: yes
#
# Used in connection with the print-message command. If this option is
# set, the message is decoded before it is passed to the external
# command specified by $print_command. If this option is unset, no
# processing will be applied to the message when printing it. The latter
# setting may be useful if you are using some advanced printer filter
# which is able to properly format e-mail messages for printing.
#
# set print_decode = yes
#
##########
# print_split
#
# Type: boolean
# Default: no
#
# Used in connection with the print-message command. If this option is
# set, the command specified by $print_command is executed once for each
# message which is to be printed. If this option is unset, the command
# specified by $print_command is executed only once, and all the
# messages are concatenated, with a form feed as the message separator.
#
# Those who use the enscript(1) program's mail-printing mode will most
# likely want to set this option.
#
# set print_split = no
#
##########
# prompt_after
#
# Type: boolean
# Default: yes
#
# If you use an external ``$pager'', setting this variable will cause
# Mutt to prompt you for a command when the pager exits rather than
# returning to the index menu. If unset, Mutt will return to the index
# menu when the external pager exits.
#
# set prompt_after = yes
#
##########
# query_command
#
# Type: path
# Default: ""
#
# This specifies the command that mutt will use to make external address
# queries. The string should contain a %s, which will be substituted
# with the query string the user types. See ``query'' for more
# information.
#
# set query_command = ''
#
##########
# quit
#
# Type: quadoption
# Default: yes
#
# This variable controls whether ``quit'' and ``exit'' actually quit
# from mutt. If it set to yes, they do quit, if it is set to no, they
# have no effect, and if it is set to ask-yes or ask-no, you are
# prompted for confirmation when you try to quit.
#
# set quit = yes
#
##########
# quote_regexp
#
# Type: regular expression
# Default: "^([ \t]*[|>:}#])+"
#
# A regular expression used in the internal-pager to determine quoted
# sections of text in the body of a message.
#
# Note: In order to use the quotedx patterns in the internal pager, you
# need to set this to a regular expression that matches exactly the
# quote characters at the beginning of quoted lines.
#
# set quote_regexp = '^([ \t]*[|>:}#])+'
#
##########
# read_inc
#
# Type: number
# Default: 10
#
# If set to a value greater than 0, Mutt will display which message it
# is currently on when reading a mailbox or when performing search
# actions such as search and limit. The message is printed after
# read_inc messages have been read or searched (e.g., if set to 25, Mutt
# will print a message when it is at message 25, and then again when it
# gets to message 50). This variable is meant to indicate progress when
# reading or searching large mailboxes which may take some time. When
# set to 0, only a single message will appear before the reading the
# mailbox.
#
# Also see the ``$write_inc'' variable and the ``Tuning'' section of the
# manual for performance considerations.
#
# set read_inc = '10'
#
##########
# read_only
#
# Type: boolean
# Default: no
#
# If set, all folders are opened in read-only mode.
#
# set read_only = no
#
##########
# realname
#
# Type: string
# Default: ""
#
# This variable specifies what "real" or "personal" name should be used
# when sending messages.
#
# By default, this is the GECOS field from /etc/passwd. Note that this
# variable will not be used when the user has set a real name in the
# $from variable.
#
# set realname = ''
#
##########
# recall
#
# Type: quadoption
# Default: ask-yes
#
# Controls whether or not Mutt recalls postponed messages when composing
# a new message. Also see ``$postponed''.
#
# Setting this variable to ``yes'' is not generally useful, and thus not
# recommended.
#
# set recall = ask-yes
#
##########
# record
#
# Type: path
# Default: "~/sent"
#
# This specifies the file into which your outgoing messages should be
# appended. (This is meant as the primary method for saving a copy of
# your messages, but another way to do this is using the ``my_hdr''
# command to create a Bcc: field with your email address in it.)
#
# The value of $record is overridden by the ``$force_name'' and
# ``$save_name'' variables, and the ``fcc-hook'' command.
#
# set record = '~/sent'
#
##########
# reply_regexp
#
# Type: regular expression
# Default: "^(re([\[0-9\]+])*|aw):[ \t]*"
#
# A regular expression used to recognize reply messages when threading
# and replying. The default value corresponds to the English "Re:" and
# the German "Aw:".
#
# set reply_regexp = '^(re([\[0-9\]+])*|aw):[ \t]*'
#
##########
# reply_self
#
# Type: boolean
# Default: no
#
# If unset and you are replying to a message sent by you, Mutt will
# assume that you want to reply to the recipients of that message rather
# than to yourself.
#
# set reply_self = no
#
##########
# reply_to
#
# Type: quadoption
# Default: ask-yes
#
# If set, when replying to a message, Mutt will use the address listed
# in the Reply-to: header as the recipient of the reply. If unset, it
# will use the address in the From: header field instead. This option is
# useful for reading a mailing list that sets the Reply-To: header field
# to the list address and you want to send a private message to the
# author of a message.
#
# set reply_to = ask-yes
#
##########
# resolve
#
# Type: boolean
# Default: yes
#
# When set, the cursor will be automatically advanced to the next
# (possibly undeleted) message whenever a command that modifies the
# current message is executed.
#
# set resolve = yes
#
##########
# reverse_alias
#
# Type: boolean
# Default: no
#
# This variable controls whether or not Mutt will display the "personal"
# name from your aliases in the index menu if it finds an alias that
# matches the message's sender. For example, if you have the following
# alias:
#
#alias juser abd30425@somewhere.net (Joe User)
#
# and then you receive mail which contains the following header:
#
#From: abd30425@somewhere.net
#
# It would be displayed in the index menu as ``Joe User'' instead of
# ``abd30425@somewhere.net.'' This is useful when the person's e-mail
# address is not human friendly (like CompuServe addresses).
#
# set reverse_alias = no
#
##########
# reverse_name
#
# Type: boolean
# Default: no
#
# It may sometimes arrive that you receive mail to a certain machine,
# move the messages to another machine, and reply to some the messages
# from there. If this variable is set, the default From: line of the
# reply messages is built using the address where you received the
# messages you are replying to if that address matches your alternates.
# If the variable is unset, or the address that would be used doesn't
# match your alternates, the From: line will use your address on the
# current machine.
#
# set reverse_name = no
#
##########
# reverse_realname
#
# Type: boolean
# Default: yes
#
# This variable fine-tunes the behaviour of the reverse_name feature.
# When it is set, mutt will use the address from incoming messages
# as-is, possibly including eventual real names. When it is unset, mutt
# will override any such real names with the setting of the realname
# variable.
#
# set reverse_realname = yes
#
##########
# rfc2047_parameters
#
# Type: boolean
# Default: no
#
# When this variable is set, Mutt will decode RFC-2047-encoded MIME
# parameters. You want to set this variable when mutt suggests you to
# save attachments to files named like this:
# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
#
# When this variable is set interactively, the change doesn't have the
# desired effect before you have changed folders.
#
# Note that this use of RFC 2047's encoding is explicitly, prohibited by
# the standard, but nevertheless encountered in the wild. Also note that
# setting this parameter will not have the effect that mutt generates
# this kind of encoding. Instead, mutt will unconditionally use the
# encoding specified in RFC 2231.
#
# set rfc2047_parameters = no
#
##########
# save_address
#
# Type: boolean
# Default: no
#
# If set, mutt will take the sender's full address when choosing a
# default folder for saving a mail. If ``$save_name'' or ``$force_name''
# is set too, the selection of the fcc folder will be changed as well.
#
# set save_address = no
#
##########
# save_empty
#
# Type: boolean
# Default: yes
#
# When unset, mailboxes which contain no saved messages will be removed
# when closed (the exception is ``$spoolfile'' which is never removed).
# If set, mailboxes are never removed.
#
# Note: This only applies to mbox and MMDF folders, Mutt does not delete
# MH and Maildir directories.
#
# set save_empty = yes
#
##########
# save_history
#
# Type: number
# Default: 0
#
# This variable controls the size of the history saved in the
# ``$history_file'' file.
#
# set save_history = '0'
#
##########
# save_name
#
# Type: boolean
# Default: no
#
# This variable controls how copies of outgoing messages are saved. When
# set, a check is made to see if a mailbox specified by the recipient
# address exists (this is done by searching for a mailbox in the
# ``$folder'' directory with the username part of the recipient
# address). If the mailbox exists, the outgoing message will be saved to
# that mailbox, otherwise the message is saved to the ``$record''
# mailbox.
#
# Also see the ``$force_name'' variable.
#
# set save_name = no
#
##########
# score
#
# Type: boolean
# Default: yes
#
# When this variable is unset, scoring is turned off. This can be useful
# to selectively disable scoring for certain folders when the
# ``$score_threshold_delete'' variable and friends are used.
#
# set score = yes
#
##########
# score_threshold_delete
#
# Type: number
# Default: -1
#
# Messages which have been assigned a score equal to or lower than the
# value of this variable are automatically marked for deletion by mutt.
# Since mutt scores are always greater than or equal to zero, the
# default setting of this variable will never mark a message for
# deletion.
#
# set score_threshold_delete = '-1'
#
##########
# score_threshold_flag
#
# Type: number
# Default: 9999
#
# Messages which have been assigned a score greater than or equal to
# this variable's value are automatically marked "flagged".
#
# set score_threshold_flag = '9999'
#
##########
# score_threshold_read
#
# Type: number
# Default: -1
#
# Messages which have been assigned a score equal to or lower than the
# value of this variable are automatically marked as read by mutt. Since
# mutt scores are always greater than or equal to zero, the default
# setting of this variable will never mark a message read.
#
# set score_threshold_read = '-1'
#
##########
# send_charset
#
# Type: string
# Default: "us-ascii:iso-8859-1:utf-8"
#
# A list of character sets for outgoing messages. Mutt will use the
# first character set into which the text can be converted exactly. If
# your ``$charset'' is not iso-8859-1 and recipients may not understand
# UTF-8, it is advisable to include in the list an appropriate widely
# used standard character set (such as iso-8859-2, koi8-r or
# iso-2022-jp) either instead of or after "iso-8859-1".
#
# set send_charset = 'us-ascii:iso-8859-1:utf-8'
#
##########
# sendmail
#
# Type: path
# Default: "/usr/sbin/sendmail -oem -oi"
#
# Specifies the program and arguments used to deliver mail sent by Mutt.
# Mutt expects that the specified program interprets additional
# arguments as recipient addresses.
#
# set sendmail = '/usr/sbin/sendmail -oem -oi'
#
##########
# sendmail_wait
#
# Type: number
# Default: 0
#
# Specifies the number of seconds to wait for the ``$sendmail'' process
# to finish before giving up and putting delivery in the background.
#
# Mutt interprets the value of this variable as follows:
#
# >0
# number of seconds to wait for sendmail to finish before
# continuing
#
# 0
# wait forever for sendmail to finish
#
# <0
# always put sendmail in the background without waiting
#
# Note that if you specify a value other than 0, the output of the child
# process will be put in a temporary file. If there is some error, you
# will be informed as to where to find the output.
#
# set sendmail_wait = '0'
#
##########
# shell
#
# Type: path
# Default: ""
#
# Command to use when spawning a subshell. By default, the user's login
# shell from /etc/passwd is used.
#
# set shell = ''
#
##########
# sig_dashes
#
# Type: boolean
# Default: yes
#
# If set, a line containing ``-- '' will be inserted before your
# ``$signature''. It is strongly recommended that you not unset this
# variable unless your ``signature'' contains just your name. The reason
# for this is because many software packages use ``-- \n'' to detect
# your signature. For example, Mutt has the ability to highlight the
# signature in a different color in the builtin pager.
#
# set sig_dashes = yes
#
##########
# sig_on_top
#
# Type: boolean
# Default: no
#
# If set, the signature will be included before any quoted or forwarded
# text. It is strongly recommended that you do not set this variable
# unless you really know what you are doing, and are prepared to take
# some heat from netiquette guardians.
#
# set sig_on_top = no
#
##########
# signature
#
# Type: path
# Default: "~/.signature"
#
# Specifies the filename of your signature, which is appended to all
# outgoing messages. If the filename ends with a pipe (``|''), it is
# assumed that filename is a shell command and input should be read from
# its stdout.
#
# set signature = '~/.signature'
#
##########
# simple_search
#
# Type: string
# Default: "~f %s | ~s %s"
#
# Specifies how Mutt should expand a simple search into a real search
# pattern. A simple search is one that does not contain any of the ~
# operators. See ``patterns'' for more information on search patterns.
#
# For example, if you simply type joe at a search or limit prompt, Mutt
# will automatically expand it to the value specified by this variable.
# For the default value it would be:
#
# ~f joe | ~s joe
#
# set simple_search = '~f %s | ~s %s'
#
##########
# smart_wrap
#
# Type: boolean
# Default: yes
#
# Controls the display of lines longer than the screen width in the
# internal pager. If set, long lines are wrapped at a word boundary. If
# unset, lines are simply wrapped at the screen edge. Also see the
# ``$markers'' variable.
#
# set smart_wrap = yes
#
##########
# smileys
#
# Type: regular expression
# Default: "(>From )|(:[-^]?[][)(><}{|/DP])"
#
# The pager uses this variable to catch some common false positives of
# ``$quote_regexp'', most notably smileys in the beginning of a line
#
# set smileys = '(>From )|(:[-^]?[][)(><}{|/DP])'
#
##########
# sleep_time
#
# Type: number
# Default: 1
#
# Specifies time, in seconds, to pause while displaying certain
# informational messages, while moving from folder to folder and after
# expunging messages from the current folder. The default is to pause
# one second, so a value of zero for this option suppresses the pause.
#
# set sleep_time = '1'
#
##########
# smtp_url
#
# Type: string
# Default: ""
#
# Defines the SMTP ``smart'' host where sent messages should relayed for
# delivery. This should take the form of an SMTP URL, eg:
#
# smtp[s]://[user[:pass]@]host[:port]/
#
# Setting this variable overrides the value of the ``$sendmail''
# variable.
#
# set smtp_url = ''
#
##########
# smtp_authenticators
#
# Type: string
# Default: ""
#
# This is a colon-delimited list of authentication methods mutt may
# attempt to use to log in to an SMTP server, in the order mutt should
# try them. Authentication methods are any SASL mechanism, eg
# ``digest-md5'', ``gssapi'' or ``cram-md5''. This parameter is
# case-insensitive. If this parameter is unset (the default) mutt will
# try all available methods, in order from most-secure to least-secure.
#
# Example: set smtp_authenticators="digest-md5:cram-md5"
#