rendered paste bodychemikalz@chemikalz:~$ lsmod
Module Size Used by
af_packet 24840 4
nls_iso8859_1 5120 1
nls_cp437 6784 1
vfat 14080 1
fat 54300 1 vfat
usb_storage 73024 1
ide_core 116804 1 usb_storage
libusual 18448 1 usb_storage
ipv6 273892 10
rfcomm 42136 2
l2cap 26240 11 rfcomm
bluetooth 57060 4 rfcomm,l2cap
apm 22616 2
ppdev 10244 0
cpufreq_ondemand 9612 0
cpufreq_conservative 8072 0
cpufreq_stats 7232 0
freq_table 5792 2 cpufreq_ondemand,cpufreq_stats
cpufreq_powersave 2688 0
cpufreq_userspace 5280 0
lp 12580 0
snd_ymfpci 63264 1
gameport 16776 1 snd_ymfpci
snd_ac97_codec 100644 1 snd_ymfpci
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
snd_pcm 80388 3 snd_ymfpci,snd_ac97_codec,snd_pcm_oss
snd_opl3_lib 11520 1 snd_ymfpci
snd_hwdep 10244 1 snd_opl3_lib
snd_page_alloc 11400 2 snd_ymfpci,snd_pcm
snd_mpu401_uart 9600 1 snd_ymfpci
snd_seq_dummy 4740 0
snd_seq_oss 33152 0
snd_seq_midi 9600 0
parport_pc 37412 1
snd_rawmidi 25728 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
parport 37448 3 ppdev,lp,parport_pc
snd_seq 53232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24324 4 snd_ymfpci,snd_pcm,snd_opl3_lib,snd_seq
snd_seq_device 9228 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
wlan_scan_sta 15104 1
serio_raw 8068 0
ath_rate_sample 14208 1
pcspkr 4224 0
snd 54660 15 snd_ymfpci,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
shpchp 34580 0
pci_hotplug 32704 1 shpchp
psmouse 39952 0
ath_pci 98336 0
soundcore 8800 1 snd
wlan 206660 4 wlan_scan_sta,ath_rate_sample,ath_pci
i2c_piix4 9740 0
intel_agp 25620 1
agpgart 35016 1 intel_agp
i2c_core 26112 1 i2c_piix4
ath_hal 192720 3 ath_rate_sample,ath_pci
evdev 11136 2
ext3 133896 2
jbd 60456 1 ext3
mbcache 9732 1 ext3
sg 36764 0
usbhid 29536 0
hid 28928 1 usbhid
sd_mod 30336 7
sr_mod 17828 0
cdrom 37536 1 sr_mod
floppy 60004 0
uhci_hcd 26640 0
usbcore 138632 5 usb_storage,libusual,usbhid,uhci_hcd
ata_piix 17540 3
ata_generic 8452 0
libata 125168 2 ata_piix,ata_generic
scsi_mod 147084 5 usb_storage,sg,sd_mod,sr_mod,libata
fuse 47124 1
apparmor 40728 0
commoncap 8320 1 apparmor
chemikalz@chemikalz:~$ lsmod |pico
chemikalz@chemikalz:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e7400 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000040fdc00 (usable)
[ 0.000000] BIOS-e820: 00000000040fdc00 - 00000000040ff800 (ACPI data)
[ 0.000000] BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000040ffc00 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000fffe7400 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65536) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65536
[ 0.000000] HighMem 65536 -> 65536
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65536
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60960 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.1 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F67C0 checksum 0
[ 0.000000] ACPI: RSDP 000F67C0, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 040FDE3F, 0028 (r1 PTLTD RSDT 0 PTL 1000000)
[ 0.000000] ACPI: FACP 040FF78C, 0074 (r1 INTEL MAUI 0 PTL F4240)
[ 0.000000] ACPI: DSDT 040FDE67, 1925 (r1 Intel MU44EX 0 MSFT 1000004)
[ 0.000000] ACPI: FACS 040FFBC0, 0040
[ 0.000000] ACPI: BIOS age (1998) fails cutoff (2000), acpi=force is required to enable ACPI
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:effe7400)
[ 0.000000] Built 1 zonelists. Total pages: 65024
[ 0.000000] Kernel command line: root=UUID=004cd0b3-13c3-42b3-93b3-4369ee42222f ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0120c000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 365.039 MHz processor.
[ 25.920812] Console: colour VGA+ 80x25
[ 25.921385] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 25.922123] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 25.973517] Memory: 248460k/262144k available (2015k kernel code, 13184k reserved, 916k data, 364k init, 0k highmem)
[ 25.973575] virtual kernel memory layout:
[ 25.973581] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 25.973590] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 25.973598] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 25.973606] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 25.973614] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 25.973622] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 25.973630] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 25.973649] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 25.973838] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 26.053885] Calibrating delay using timer specific routine.. 731.01 BogoMIPS (lpj=1462023)
[ 26.054011] Security Framework v1.0.0 initialized
[ 26.054051] SELinux: Disabled at boot.
[ 26.054128] Mount-cache hash table entries: 512
[ 26.054754] CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 26.054816] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 26.054831] CPU: L2 cache: 128K
[ 26.054847] CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 26.054899] Compat vDSO mapped to ffffe000.
[ 26.054970] Checking 'hlt' instruction... OK.
[ 26.070037] SMP alternatives: switching to UP code
[ 26.070855] Freeing SMP alternatives: 11k freed
[ 26.072334] Early unpacking initramfs... done
[ 27.899220] CPU0: Intel Celeron (Mendocino) stepping 00
[ 27.899255] SMP motherboard not detected.
[ 27.899269] Local APIC not detected. Using dummy APIC emulation.
[ 27.899512] Brought up 1 CPUs
[ 27.900220] Booting paravirtualized kernel on bare hardware
[ 27.900459] Time: 16:25:28 Date: 02/11/108
[ 27.900609] NET: Registered protocol family 16
[ 27.901225] EISA bus registered
[ 27.915824] PCI: PCI BIOS revision 2.10 entry at 0xfd9c3, last bus=1
[ 27.915841] PCI: Using configuration type 1
[ 27.915853] Setting up standard PCI resources
[ 27.928170] ACPI: Interpreter disabled.
[ 27.928197] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 27.928248] pnp: PnP ACPI: disabled
[ 27.928268] PnPBIOS: Scanning system for PnP BIOS support...
[ 27.928407] PnPBIOS: Found PnP BIOS installation structure at 0xc00f67e0
[ 27.928426] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x995e, dseg 0x400
[ 27.939689] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
[ 27.940040] PCI: Probing PCI hardware
[ 27.940131] PCI: Probing PCI hardware (bus 00)
[ 27.940881] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 27.940892] * this clock source is slow. Consider trying other clock sources
[ 27.940979] PCI quirk: region 8000-803f claimed by PIIX4 ACPI
[ 27.940996] PCI quirk: region 7000-700f claimed by PIIX4 SMB
[ 27.944651] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
[ 27.947302] NET: Registered protocol family 8
[ 27.947317] NET: Registered protocol family 20
[ 27.947791] pnp: 00:00: ioport range 0x370-0x371 has been reserved
[ 27.947821] pnp: 00:00: iomem range 0xfffc0000-0xffffffff could not be reserved
[ 27.947861] pnp: 00:01: iomem range 0x0-0x9ffff could not be reserved
[ 27.947879] pnp: 00:01: iomem range 0xe4000-0xfffff could not be reserved
[ 27.947898] pnp: 00:01: iomem range 0x100000-0xfffffff could not be reserved
[ 27.947916] pnp: 00:01: iomem range 0xfff80000-0xfffbffff has been reserved
[ 27.947973] pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 27.947991] pnp: 00:0a: ioport range 0x8000-0x803f has been reserved
[ 27.948009] pnp: 00:0a: ioport range 0x7000-0x700f has been reserved
[ 27.948045] pnp: 00:0b: iomem range 0xdc000-0xdffff has been reserved
[ 27.949753] Time: tsc clocksource has been installed.
[ 27.950522] PCI: Bridge: 0000:00:01.0
[ 27.950543] IO window: 9000-9fff
[ 27.950563] MEM window: f4100000-f5ffffff
[ 27.950580] PREFETCH window: 20000000-200fffff
[ 27.950677] NET: Registered protocol family 2
[ 27.985959] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 27.986185] TCP established hash table entries: 8192 (order: 4, 98304 bytes)
[ 27.986768] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 27.987291] TCP: Hash tables configured (established 8192 bind 8192)
[ 27.987310] TCP reno registered
[ 27.998540] checking if image is initramfs... it is
[ 31.406412] Freeing initrd memory: 7052k freed
[ 31.408268] audit: initializing netlink socket (disabled)
[ 31.408335] audit(1205252730.980:1): initialized
[ 31.423965] VFS: Disk quotas dquot_6.5.1
[ 31.424427] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 31.425660] io scheduler noop registered
[ 31.425680] io scheduler anticipatory registered
[ 31.425692] io scheduler deadline registered
[ 31.425867] io scheduler cfq registered (default)
[ 31.425916] Limiting direct PCI/PCI transfers.
[ 31.425988] Boot video device is 0000:01:00.0
[ 31.426886] isapnp: Scanning for PnP cards...
[ 31.781509] isapnp: No Plug & Play device found
[ 32.067313] Real Time Clock Driver v1.12ac
[ 32.067780] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 32.068018] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.073302] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.079136] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 32.080066] input: Macintosh mouse button emulation as /class/input/input0
[ 32.080662] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 32.083696] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 32.083728] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 32.085001] mice: PS/2 mouse device common for all mice
[ 32.085882] EISA: Probing bus 0 at eisa.0
[ 32.085929] Cannot allocate resource for EISA slot 1
[ 32.085981] Cannot allocate resource for EISA slot 7
[ 32.085994] Cannot allocate resource for EISA slot 8
[ 32.086006] EISA: Detected 0 cards.
[ 32.086516] TCP cubic registered
[ 32.086603] NET: Registered protocol family 1
[ 32.086728] Using IPI No-Shortcut mode
[ 32.087147] Magic number: 0:877:438
[ 32.089154] Freeing unused kernel memory: 364k freed
[ 34.505592] AppArmor: AppArmor initialized<5>audit(1205252734.480:2): type=1505 info="AppArmor initialized" pid=1120
[ 34.549287] fuse init (API version 7.8)
[ 34.583401] Failure registering capabilities with primary security module.
[ 34.694547] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 38.128129] SCSI subsystem initialized
[ 38.184901] libata version 2.21 loaded.
[ 38.216332] ata_piix 0000:00:07.1: version 2.11
[ 38.217206] scsi0 : ata_piix
[ 38.217489] scsi1 : ata_piix
[ 38.217657] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011020 irq 14
[ 38.217679] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011028 irq 15
[ 38.315730] usbcore: registered new interface driver usbfs
[ 38.315855] usbcore: registered new interface driver hub
[ 38.316025] usbcore: registered new device driver usb
[ 38.324501] USB Universal Host Controller Interface driver v3.0
[ 38.553208] ata1.00: ATAPI: DVDRW 16X16, PTS2, max UDMA/66
[ 38.741182] ata1.00: configured for UDMA/33
[ 38.921117] ata2.00: ATA-3: FUJITSU MPC3064AT, 6018, max UDMA/33
[ 38.921141] ata2.00: 12672450 sectors, multi 16: LBA
[ 38.922087] ata2.01: ATA-5: WDC WD800BB-00CAA1, 17.07W17, max UDMA/100
[ 38.922106] ata2.01: 156301488 sectors, multi 16: LBA
[ 38.937227] ata2.00: configured for UDMA/33
[ 38.954151] ata2.01: configured for UDMA/33
[ 38.955576] scsi 0:0:0:0: CD-ROM DVDRW 16X16 PTS2 PQ: 0 ANSI: 5
[ 38.961014] scsi 1:0:0:0: Direct-Access ATA FUJITSU MPC3064A 6018 PQ: 0 ANSI: 5
[ 38.969016] scsi 1:0:1:0: Direct-Access ATA WDC WD800BB-00CA 17.0 PQ: 0 ANSI: 5
[ 38.969939] PCI: setting IRQ 9 as level-triggered
[ 38.969961] PCI: Found IRQ 9 for device 0000:00:07.2
[ 38.969999] PCI: Sharing IRQ 9 with 0000:01:00.0
[ 38.970036] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 38.970555] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 38.970639] uhci_hcd 0000:00:07.2: irq 9, io base 0x00001000
[ 38.971368] usb usb1: configuration #1 chosen from 1 choice
[ 38.971546] hub 1-0:1.0: USB hub found
[ 38.971593] hub 1-0:1.0: 2 ports detected
[ 39.312999] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 39.445836] FDC 0 is a post-1991 82077
[ 39.555193] usb 1-1: configuration #1 chosen from 1 choice
[ 39.961643] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 39.961674] Uniform CD-ROM driver Revision: 3.20
[ 39.963348] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 39.969011] sd 1:0:0:0: [sda] 12672450 512-byte hardware sectors (6488 MB)
[ 39.969232] sd 1:0:0:0: [sda] Write Protect is off
[ 39.969249] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.969358] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 39.969685] sd 1:0:0:0: [sda] 12672450 512-byte hardware sectors (6488 MB)
[ 39.969749] sd 1:0:0:0: [sda] Write Protect is off
[ 39.969765] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 39.969867] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 39.969897] sda: sda1 sda2 <<6>usbcore: registered new interface driver hiddev
[ 40.014267] sda5 >
[ 40.014828] sd 1:0:0:0: [sda] Attached SCSI disk
[ 40.020910] sd 1:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 40.024948] sd 1:0:1:0: [sdb] Write Protect is off
[ 40.024978] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.033461] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.035452] sd 1:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 40.035535] sd 1:0:1:0: [sdb] Write Protect is off
[ 40.035552] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 40.035658] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.035680] sdb: sdb1
[ 40.052584] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 40.083214] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 40.083351] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 40.083500] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 40.278506] input: Chicony USB Keyboard as /class/input/input1
[ 40.278591] input: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:07.2-1
[ 40.389575] input: Chicony USB Keyboard as /class/input/input2
[ 40.389659] input: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:07.2-1
[ 40.389741] usbcore: registered new interface driver usbhid
[ 40.389761] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 41.388320] Attempting manual resume
[ 41.388342] swsusp: Resume From Partition 8:5
[ 41.388353] PM: Checking swsusp image.
[ 41.417878] PM: Resume from disk failed.
[ 41.580956] kjournald starting. Commit interval 5 seconds
[ 41.581031] EXT3-fs: mounted filesystem with ordered data mode.
[ 66.233112] ath_hal: module license 'Proprietary' taints kernel.
[ 66.240056] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 66.709851] Linux agpgart interface v0.102 (c) Dave Jones
[ 66.731506] agpgart: Detected an Intel 440LX Chipset.
[ 66.739947] agpgart: AGP aperture is 64M @ 0xf8000000
[ 66.752282] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 68.233704] wlan: 0.8.4.2 (0.9.3.2)
[ 68.365935] ath_pci: 0.9.4.5 (0.9.3.2)
[ 68.415106] PCI: setting IRQ 10 as level-triggered
[ 68.415129] PCI: Found IRQ 10 for device 0000:00:0d.0
[ 70.286177] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 70.383949] input: PC Speaker as /class/input/input3
[ 70.465469] logips2pp: Detected unknown logitech mouse model 89
[ 70.757383] ath_rate_sample: 1.2 (0.9.3.2)
[ 70.758876] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 70.758911] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 70.758963] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 70.758998] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 70.759019] wifi0: mac 7.9 phy 4.5 radio 5.6
[ 70.759053] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 70.759065] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 70.759078] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 70.759090] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 70.759101] wifi0: Use hw queue 8 for CAB traffic
[ 70.759113] wifi0: Use hw queue 9 for beacons
[ 70.840435] wifi0: Atheros 5212: mem=0xf4000000, irq=10
[ 70.841166] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 70.948365] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input4
[ 73.232650] parport_pc 00:15: reported by Plug and Play BIOS
[ 73.232718] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 75.435022] PCI: setting IRQ 11 as level-triggered
[ 75.435043] PCI: Found IRQ 11 for device 0000:00:0c.0
[ 77.684654] lp0: using parport0 (interrupt-driven).
[ 77.885400] Adding 321260k swap on /dev/sda5. Priority:-1 extents:1 across:321260k
[ 78.424605] EXT3 FS on sda1, internal journal
[ 83.744515] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 83.745177] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[ 83.746674] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[ 83.747450] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 88.202842] ppdev: user-space parallel port driver
[ 89.019115] audit(1205252789.735:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4300 profile="/usr/sbin/cupsd"
[ 89.460598] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 91.047608] Failure registering capabilities with primary security module.
[ 91.900110] Bluetooth: Core ver 2.11
[ 91.901453] NET: Registered protocol family 31
[ 91.901483] Bluetooth: HCI device and connection manager initialized
[ 91.901501] Bluetooth: HCI socket layer initialized
[ 91.997815] Bluetooth: L2CAP ver 2.8
[ 91.997844] Bluetooth: L2CAP socket layer initialized
[ 92.121246] Bluetooth: RFCOMM socket layer initialized
[ 92.122433] Bluetooth: RFCOMM TTY layer initialized
[ 92.122465] Bluetooth: RFCOMM ver 1.8
[ 311.263097] NET: Registered protocol family 10
[ 311.264158] lo: Disabled Privacy Extensions
[ 321.898964] ath0: no IPv6 routers present
[ 453.169397] kjournald starting. Commit interval 5 seconds
[ 453.169899] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 453.187468] EXT3 FS on sdb1, internal journal
[ 453.187865] EXT3-fs: mounted filesystem with ordered data mode.
[ 781.395244] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 781.562035] usb 1-2: configuration #1 chosen from 1 choice
[ 782.328406] usbcore: registered new interface driver libusual
[ 782.681531] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 782.682036] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 782.839552] Initializing USB Mass Storage driver...
[ 782.848489] scsi2 : SCSI emulation for USB Mass Storage devices
[ 782.851607] usb-storage: device found at 3
[ 782.851631] usb-storage: waiting for device to settle before scanning
[ 782.852514] usbcore: registered new interface driver usb-storage
[ 782.852940] USB Mass Storage support registered.
[ 787.852801] usb-storage: device scan complete
[ 787.855881] scsi 2:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[ 788.396566] sd 2:0:0:0: [sdc] 1950720 512-byte hardware sectors (999 MB)
[ 788.401568] sd 2:0:0:0: [sdc] Write Protect is off
[ 788.401600] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 788.401614] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 788.414533] sd 2:0:0:0: [sdc] 1950720 512-byte hardware sectors (999 MB)
[ 788.419609] sd 2:0:0:0: [sdc] Write Protect is off
[ 788.419643] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 788.419658] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 788.419682] sdc: sdc1
[ 788.426040] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 788.426281] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 903.255632] kjournald starting. Commit interval 5 seconds
[ 903.256120] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 903.262164] EXT3 FS on sdb1, internal journal
[ 903.262547] EXT3-fs: mounted filesystem with ordered data mode.
[ 1774.112755] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[ 1774.224836] NET: Registered protocol family 17
[ 1794.488439] ath0: no IPv6 routers present