rendered paste bodyjulianna:~# smartctl -a /dev/hdb
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar WDxxxAB series
Device Model: WDC WD400AB-34BVA0
Serial Number: WD-WMA7F1187735
Firmware Version: 21.01H21
User Capacity: 40,020,664,320 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Mar 11 19:04:57 2008 VET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Total time to complete Offline
data collection: (2376) seconds.
Offline data collection
capabilities: (0x3b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 42) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 191 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 097 097 021 Pre-fail Always - 4200
4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 967
5 Reallocated_Sector_Ct 0x0032 199 199 112 Old_age Always - 1
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 053 053 000 Old_age Always - 34566
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 886
196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 44
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 171 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 171 occurred at disk power-on lifetime: 205 hours (8 days + 13 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 b6 8c 0a e0 Error: UNC at LBA = 0x000a8cb6 = 691382
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 01 b6 8c 0a e0 00 00:04:25.200 READ VERIFY SECTOR(S)
c8 00 01 3b 8b 38 e1 00 00:04:25.200 READ DMA
c8 00 01 00 00 00 e0 00 00:04:25.200 READ DMA
40 00 01 b5 8c 0a e0 00 00:04:25.200 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 e0 00 00:04:25.200 READ DMA
Error 170 occurred at disk power-on lifetime: 205 hours (8 days + 13 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 b6 8c 0a e0 Error: UNC at LBA = 0x000a8cb6 = 691382
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 02 b5 8c 0a e0 00 00:04:20.100 READ VERIFY SECTOR(S)
c8 00 01 3b 8b 38 e1 00 00:04:20.100 READ DMA
c8 00 01 00 00 00 e0 00 00:04:20.100 READ DMA
40 00 02 b3 8c 0a e0 00 00:04:20.100 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 e0 00 00:04:20.100 READ DMA
Error 169 occurred at disk power-on lifetime: 205 hours (8 days + 13 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 b6 8c 0a e0 Error: UNC at LBA = 0x000a8cb6 = 691382
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 04 b3 8c 0a e0 00 00:04:15.100 READ VERIFY SECTOR(S)
40 00 04 af 8c 0a e0 00 00:04:15.100 READ VERIFY SECTOR(S)
40 00 08 b7 8c 0a e0 00 00:04:15.100 READ VERIFY SECTOR(S)
c8 00 01 3b 8b 38 e1 00 00:04:15.050 READ DMA
c8 00 01 00 00 00 e0 00 00:04:15.050 READ DMA
Error 168 occurred at disk power-on lifetime: 205 hours (8 days + 13 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 b6 8c 0a e0 Error: UNC at LBA = 0x000a8cb6 = 691382
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 08 af 8c 0a e0 00 00:04:10.100 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 e0 00 00:04:10.100 READ DMA
c8 00 01 00 00 00 e0 00 00:04:10.100 READ DMA
40 00 10 af 8c 0a e0 00 00:04:04.850 READ VERIFY SECTOR(S)
c8 00 01 3b 8b 38 e1 00 00:04:04.850 READ DMA
Error 167 occurred at disk power-on lifetime: 205 hours (8 days + 13 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 b6 8c 0a e0 Error: UNC at LBA = 0x000a8cb6 = 691382
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 10 af 8c 0a e0 00 00:04:04.850 READ VERIFY SECTOR(S)
c8 00 01 3b 8b 38 e1 00 00:04:04.850 READ DMA
c8 00 01 00 00 00 e0 00 00:04:04.850 READ DMA
40 00 10 9f 8c 0a e0 00 00:04:04.850 READ VERIFY SECTOR(S)
c8 00 01 00 00 00 e0 00 00:04:04.850 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed without error 00% 705 -
# 2 Conveyance offline Completed without error 00% 705 -
# 3 Conveyance offline Completed without error 00% 704 -
# 4 Short offline Completed without error 00% 704 -
# 5 Extended offline Aborted by host 80% 704 -
# 6 Short offline Completed without error 00% 704 -
# 7 Extended offline Completed without error 00% 434 -
# 8 Short offline Completed without error 00% 0 -
Device does not support Selective Self Tests/Logging
julianna:~#