rendered paste bodydustbunny:~# ztcfg -vvvvvvvvvvvvvv
Zaptel Version: 1.4.8
Echo Canceller: MG2
Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: Clear channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: D-channel (Default) (Slaves: 24)
24 channels to configure.
-- Reloading module 'chan_zap.so' (Zapata Telephony)
== Parsing '/etc/asterisk/zapata.conf': Found
[Mar 11 04:11:53] WARNING[12504]: chan_zap.c:11176 process_zap: Ignoring switchtype
[Mar 11 04:11:53] WARNING[12504]: chan_zap.c:11176 process_zap: Ignoring signalling
[Mar 11 04:11:53] ERROR[12504]: chan_zap.c:10527 build_channels: Unable to reconfigure channel '1-23'
[Mar 11 04:11:53] WARNING[12504]: chan_zap.c:11494 reload: Reload of chan_zap.so is unsuccessful!
[Mar 11 04:11:53] VERBOSE[12504] logger.c: -- Reloading module 'chan_zap.so' (Zapata Telephony)
[Mar 11 04:11:53] VERBOSE[12504] logger.c: == Parsing '/etc/asterisk/zapata.conf': [Mar 11 04:11:53] VERBOSE[12504] logger.c: Found
[Mar 11 04:11:53] WARNING[12504] chan_zap.c: Ignoring switchtype
[Mar 11 04:11:53] WARNING[12504] chan_zap.c: Ignoring signalling
[Mar 11 04:11:53] ERROR[12504] chan_zap.c: Unable to reconfigure channel '1-23'
[Mar 11 04:11:53] WARNING[12504] chan_zap.c: Reload of chan_zap.so is unsuccessful!
dustbunny:/etc/asterisk# cat /proc/zaptel/1
Span 1: WPT1/0 "wanpipe1 card 0" (MASTER) B8ZS/ESF
1 WPT1/0/1 Clear
2 WPT1/0/2 Clear
3 WPT1/0/3 Clear
4 WPT1/0/4 Clear
5 WPT1/0/5 Clear
6 WPT1/0/6 Clear
7 WPT1/0/7 Clear
8 WPT1/0/8 Clear
9 WPT1/0/9 Clear
10 WPT1/0/10 Clear
11 WPT1/0/11 Clear
12 WPT1/0/12 Clear
13 WPT1/0/13 Clear
14 WPT1/0/14 Clear
15 WPT1/0/15 Clear
16 WPT1/0/16 Clear
17 WPT1/0/17 Clear
18 WPT1/0/18 Clear
19 WPT1/0/19 Clear
20 WPT1/0/20 Clear
21 WPT1/0/21 Clear
22 WPT1/0/22 Clear
23 WPT1/0/23 Clear
24 WPT1/0/24 HDLCFCS
(zaptel)
# Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit
# Zaptel Channels Configurations (zaptel.conf)
#
loadzone=us
defaultzone=us
#Sangoma A101 port 1 [slot:12 bus:2 span:1] <wanpipe1>
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
(zapata)
;autogenerated by /usr/local/sbin/config-zaptel do not hand edit
;Zaptel Channels Configurations (zapata.conf)
;
;For detailed zapata options, view /etc/asterisk/zapata.conf.orig
[trunkgroups]
[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
;Sangoma A101 port 1 [slot:12 bus:2 span:1] <wanpipe1>
context=from-pstn
group=1
switchtype=national
signalling=pri_cpe
channel => 1-23
(wanpipe)
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec 6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
# by /usr/local/sbin/setup-sangoma program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 12
PCIBUS = 2
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 24
TDMV_HW_DTMF = NO
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
Connected to Asterisk 1.4.17 currently running on dustbunny (pid = 11293)
Verbosity is at least 7
dustbunny*CLI> zap show status
Description Alarms IRQ bpviol CRC4
wanpipe1 card 0 OK 0 0 0
dustbunny*CLI> zap show channels
Chan Extension Context Language MOH Interpret
pseudo from-pstn default
dustbunny*CLI> -- Executing [2004005@TRG:1] Dial("SIP/110-08366a20", "zap/g1/2004005") in new stack
[Mar 11 04:08:23] WARNING[12396]: app_dial.c:1191 dial_exec_full: Unable to create channel of type 'zap' (cause 0 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
== Auto fallthrough, channel 'SIP/110-08366a20' status is 'CHANUNAVAIL'
-- Executing [2004005@TRG:1] Dial("SIP/110-08366a20", "zap/g1/2004005") in new stack
[Mar 11 04:08:23] WARNING[12396]: app_dial.c:1191 dial_exec_full: Unable to create channel of type 'zap' (cause 0 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
== Auto fallthrough, channel 'SIP/110-08366a20' status is 'CHANUNAVAIL'