rendered paste body[][][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[][]
[][][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[][]
[][] [[[ [[[ [[[ [[[ [[[ [[[ [[ [[[ [][]
[][] [[[ [[ [[[ [[ [[[[[[ [[[[[ [[[ [[ [[ [[ [[ [[[[[][]
[][] [[[ [[ [[[ [[ [[[[[[ [[[[[ [[[ [[ [[ [[ [[ [[[[[][]
[][] [[[ [[ [[[ [[ [[[[[[ [[[[[ [[[ [[ [[ [[ [[ [][]
[][] [[[ [[ [[[ [[ [[[[[[ [[[[[ [[ [[ [[[ [[[[[][]
[][] [ [[ [[[ [[ [[[[[[ [[[[[ [[[ [[ [[ [[ [[ [[[[[][]
[][][ [[[[ [[[ [[ [[[[[ [[[ [[ [[ [[[ [ [][]
[][][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[][]
[][][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[][]
** Voltaire Booter SW Ver 0.74, Board Revision: A **
** Compilation time: Feb 16 2003, 09:24:08**
Total Memory size 512 MB.
User memory start address: 0xC0000
DIMM0- size:512MB type:256Mbit (16 devices) (133.33MHz/CL=3) (100.00MHz/CL=2)
SDRAM operation mode: Normal
CAS Latency = 2 RAS Precharge = 2 RAS to CAS = 2
GT Tclock = SysClock = 100.00MHz, CPU Core clock = 650.51MHz
External cache clock=162.62Mhz
Current time and date: 23:28 (hh:mm) 08.03.2008 (dd:mm:yyyy)
Secondary Image
AutoBoot (rom) - press '#' key in 1 seconds to get Booter prompt
Return control to Dink32
$ #
$
$ help
COMMAND LIST
Command Mnemonic Command Mnemonic
======= ======== ======= ========
About... about, ab Memory Modify memod, mm
Assemble assemble, as Memory Fill memfill, mf
Breakpoint ops bkpt, bp Memory Move memove, mv
Set Baud Rate setbaud, sb Memory Search memsrch, ms
Register Display regdisp, rd
Define Alias defalias, da Register Modify regmod, rm
Disassemble disassem, ds Run Alias runalias, ra
Download download, dl Set Input setinput, si
Go go Transparent Mode transpar,tm
Help help, he Trace trace, tr
Log session log . (repeat last command)
Menu menu, me
Memory Display memdisp, md
For additional details about a command, please type "help <mnemonic>"
$ ab
[][][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[][]
[][][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[][]
[][] [[[ [[[ [[[ [[[ [[[ [[[ [[ [[[ [][]
[][] [[[ [[ [[[ [[ [[[[[[ [[[[[ [[[ [[ [[ [[ [[ [[[[[][]
[][] [[[ [[ [[[ [[ [[[[[[ [[[[[ [[[ [[ [[ [[ [[ [[[[[][]
[][] [[[ [[ [[[ [[ [[[[[[ [[[[[ [[[ [[ [[ [[ [[ [][]
[][] [[[ [[ [[[ [[ [[[[[[ [[[[[ [[ [[ [[[ [[[[[][]
[][] [ [[ [[[ [[ [[[[[[ [[[[[ [[[ [[ [[ [[ [[ [[[[[][]
[][][ [[[[ [[[ [[ [[[[[ [[[ [[ [[ [[[ [ [][]
[][][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[][]
[][][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[][]
** Voltaire Booter SW Ver 0.74, Board Revision: A **
** Compilation time: Feb 16 2003, 09:24:08**
Total Memory size 512 MB.
User memory start address: 0xC0000
DIMM0- size:512MB type:256Mbit (16 devices) (133.33MHz/CL=3) (100.00MHz/CL=2)
SDRAM operation mode: Normal
CAS Latency = 2 RAS Precharge = 2 RAS to CAS = 2
GT Tclock = SysClock = 100.00MHz, CPU Core clock = 650.51MHz
External cache clock=162.62Mhz
Current time and date: 23:28 (hh:mm) 08.03.2008 (dd:mm:yyyy)
$ menu
COMMAND LIST
Command Mnemonic Command Mnemonic
======= ======== ======= ========
About... about, ab Memory Modify memod, mm
Assemble assemble, as Memory Fill memfill, mf
Breakpoint ops bkpt, bp Memory Move memove, mv
Set Baud Rate setbaud, sb Memory Search memsrch, ms
Register Display regdisp, rd
Define Alias defalias, da Register Modify regmod, rm
Disassemble disassem, ds Run Alias runalias, ra
Download download, dl Set Input setinput, si
Go go Transparent Mode transpar,tm
Help help, he Trace trace, tr
Log session log . (repeat last command)
Menu menu, me
Memory Display memdisp, md
For additional details about a command, please type "help <mnemonic>"
$ go
ERROR : (fe00) : invalid number of command arguements
$ md
ERROR : (fc00) : used a reserved word as an arguement
$ Use Default Dink Trace Level : 5
[][][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[][]
[][][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[][]
[][] [[[ [[[ [[[ [[[ [[[ [[[ [[ [[[ [][]
[][] [[[ [[ [[[ [[ [[[[[[ [[[[[ [[[ [[ [[ [[ [[ [[[[[][]
[][] [[[ [[ [[[ [[ [[[[[[ [[[[[ [[[ [[ [[ [[ [[ [[[[[][]
[][] [[[ [[ [[[ [[ [[[[[[ [[[[[ [[[ [[ [[ [[ [[ [][]
[][] [[[ [[ [[[ [[ [[[[[[ [[[[[ [[ [[ [[[ [[[[[][]
[][] [ [[ [[[ [[ [[[[[[ [[[[[ [[[ [[ [[ [[ [[ [[[[[][]
[][][ [[[[ [[[ [[ [[[[[ [[[ [[ [[ [[[ [ [][]
[][][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[][]
[][][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[][]
** Voltaire Booter SW Ver 0.74, Board Revision: A **
** Compilation time: Feb 16 2003, 09:24:08**
Total Memory size 512 MB.
User memory start address: 0xC0000
DIMM0- size:512MB type:256Mbit (16 devices) (133.33MHz/CL=3) (100.00MHz/CL=2)
SDRAM operation mode: Normal
CAS Latency = 2 RAS Precharge = 2 RAS to CAS = 2
GT Tclock = SysClock = 100.00MHz, CPU Core clock = 650.51MHz
External cache clock=162.62Mhz
Current time and date: 23:30 (hh:mm) 08.03.2008 (dd:mm:yyyy)
Secondary Image
AutoBoot (rom) - press '#' key in 1 seconds to get Booter prompt
Execute kernel from FLASH image...
Warning: WatchDog enabled before branch
Uncompressing ...done.
Loading...
IBAT[0].Low=0xF0000032, IBAT[0].High=0xF0001FFE
DBAT[0].Low=0xF000003A, DBAT[0].High=0xF0001FFE
IBAT[1] - Disabled
DBAT[1] - Disabled
IBAT[3] - Disabled
DBAT[3] - Disabled
Init Environment, please wait...(flash start env. 0xffec0000)
The StrataFlashBar is 0xfe000000.the size is 0x2000000
Total memory = 256MB; using 1024kB for hash table (at c0300000)
IBAT[2].Low=0x2, IBAT[2].High=0xC0001FFE
DBAT[2].Low=0x2, DBAT[2].High=0xC0001FFE
Linux version 2.4.4-BARAK_PRIM_6_3 (root@tzahi-dev) (gcc version 2.95.3 20010315 (release)) #1 Wed Feb 5 18:52:15 UTC 2003
IBAT[1].Low=0x80000032, IBAT[1].High=0x80001FFE
DBAT[1].Low=0x8000003A, DBAT[1].High=0x80001FFE
IBAT[2].Low=0x90000032, IBAT[2].High=0x90001FFE
DBAT[2].Low=0x9000003A, DBAT[2].High=0x90001FFE
IBAT[3] - Disabled
DBAT[3] - Disabled
On node 0 totalpages: 65536
zone(0): 65536 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram rw ip=192.168.1.2:192.168.1.1::255.255.255.0:ww:eth0:none console=mpsc
Board TCLK is 100 MHz
Assigned SDMA IRQ 8;
Assigned MPSC IRQ 9 to port 0;
Calibrating delay loop... 432.53 BogoMIPS
Memory: 228488k available (1392k kernel code, 740k data, 404k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
----------------------------------------------------------
Primary Environment init...
Assigned IIC IRQ 10;
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
Assigned MPSC IRQ 11 to port 1;
pty: 256 Unix98 ptys configured
Kernel Warm boot device registered. Major 122
block: queued sectors max/low 151706kB/50568kB, 448 slots per queue
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
00000000 00000067 00000000
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 4972k freed
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x2
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
loop: loaded (max 8 devices)
physmap flash device: 500000 at fe000000
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
evb64260_eth_open : Assigned IRQ 12 to evb64260_eth0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: AppleTalk 0.18a for Linux NET4.0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 404k init
Init CPU & PCI Access Protect Regions... pass
Kernel logger buffer is at:0xcec00000, size: 4194291, using existing buffer
Real Time Clock Driver v1.001a
Assigned FAN irq 14
Assigned PCI Retry counter irq 15
Environment module init...
Primary Image version 2.4.4-BARAK_PRIM_6_3 #1 Wed Feb 5 18:52:15 UTC 2003
* ioremap_bot = 0xf8000000, ioremap_base=0xf8000000
** Special kernel version with special "non HW coherent" SDRAM region **
init started: BusyBox v0.60.5 (2002.10.28-11:06+0000) multi-call binary
Starting BSP: [ OK ]
Mounting all mounted file systems.
Welcome to Voltaire Universal Busybox disk
Now trying to continue normal boot.
ww login: admin
Password:
Load mode%
Load mode%help
GNU bash, version 2.05a.0(1)-release (powerpc-unknown-linux-gnu)
These shell commands are defined internally. Type `help' to see this list.
Type `help name' to find out more about the function `name'.
Use `info bash' to find out more about the shell in general.
A star (*) next to a name means that the command is disabled.
%[DIGITS | WORD] [&] . filename
: [ arg... ]
alias [-p] [name[=value] ... ] bind [-lpvsPVS] [-m keymap] [-f fi
break [n] builtin [shell-builtin [arg ...]]
case WORD in [PATTERN [| PATTERN]. cd [-PL] [dir]
command [-pVv] command [arg ...] compgen [-abcdefgjkvu] [-o option]
complete [-abcdefgjkvu] [-pr] [-o continue [n]
declare [-afFrxi] [-p] name[=value dirs [-clpv] [+N] [-N]
echo [-neE] [arg ...] enable [-pnds] [-a] [-f filename]
eval [arg ...] exec [-cl] [-a name] file [redirec
exit [n] export [-nf] [name ...] or export
false fc [-e ename] [-nlr] [first] [last
for NAME [in WORDS ... ;] do COMMA function NAME { COMMANDS ; } or NA
getopts optstring name [arg] hash [-r] [-p pathname] [-t] [name
help [-s] [pattern ...] history [-c] [-d offset] [n] or hi
if COMMANDS; then COMMANDS; [ elif let arg [arg ...]
local name[=value] ... logout
popd [+N | -N] [-n] printf format [arguments]
pushd [dir | +N | -N] [-n] pwd [-PL]
read [-ers] [-t timeout] [-p promp readonly [-anf] [name ...] or read
return [n] select NAME [in WORDS ... ;] do CO
set [--abefhkmnptuvxBCHP] [-o opti shift [n]
shopt [-pqsu] [-o long-option] opt source filename
test [expr] time [-p] PIPELINE
times trap [arg] [signal_spec ...] or tr
true type [-apt] name [name ...]
typeset [-afFrxi] [-p] name[=value ulimit [-SHacdflmnpstuv] [limit]
umask [-p] [-S] [mode] unalias [-a] [name ...]
unset [-f] [-v] [name ...] until COMMANDS; do COMMANDS; done
variables - Some variable names an wait [n]
while COMMANDS; do COMMANDS; done { COMMANDS ; }
Load mode%ls
bash: ls: command not found
Load mode%bash
bash: bash: command not found
Load mode%?
Command Description
----------------------------------------------------------------
ip-address - set/show ip address
default-geteway - set default geteway
show-ip - show ip
route-show - show route table
ping - ping
telnet - telnet
update-software - get new software version by FTP
update-software-tftp - get new software version by TFTP
factory-default - use factory default configration
set-config-old - use old configration
import - import configration by FTP
import-tftp - import configration by TFTP
export-tftp - export configration by TFTP
reload - reload the nVigor
? - help
Load mode%show-ip
eth0 Link encap:Ethernet HWaddr 00:08:F1:05:67:00
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 iB) TX bytes:0 (0.0 iB)
Interrupt:12
Load mode%command bash
bash: bash: command not found
Load mode%sh
bash: sh: command not found
Load mode%/bin/sh
bash: /bin/sh: restricted: cannot specify `/' in command names
Load mode%
! exit reload
. export return
: export-tftp route-show
? factory-default select
CVS false set
[ fc set-config-old
[[ fi shift
]] for shopt
alias function show-ip
bind getopts source
break hash telnet
builtin help test
case history then
cd if time
command import times
compgen import-tftp trap
complete in true
continue init type
declare ip-address typeset
default-geteway let ulimit
dirs local umask
do logout unalias
done ping unset
echo popd until
elif printf update-software
else pushd update-software-tftp
enable pwd wait
esac read while
eval readonly {
exec reboot }
Load mode%telnet
USE: telnet <ip-address>
Load mode%