rendered paste bodyLinux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Bootdata ok (command line is root=/dev/sda1 ro)
Linux version 2.6.18-53.1.13.el5xen (mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Tue Feb 12 13:33:07 EST 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 133120
Kernel command line: root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2301.366 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Software IO TLB disabled
Memory: 501504k/532480k available (2357k kernel code, 22216k reserved, 1326k data, 172k init)
Calibrating delay using timer specific routine.. 5756.77 BogoMIPS (lpj=11513553)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
(SMP-)alternatives turned off
Brought up 1 CPUs
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 1C7A0 could not acquire Mutex [2] [20060707]
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 1C7A0 could not acquire Mutex [2] [20060707]
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1204674140.981:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key C03FF3A61AA023C3
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vif/0
Write protecting the kernel read-only data: 445k
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading xenblk.ko module
Registering block device major 8
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading ohci-hcd.ko module
Loading ehci-hcd.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
register_blkdev: cannot get major 8 for sd
Loading libata.ko module
Loading sata_via.ko module
Loading usb-storage.ko module
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Waiting for driver initialization.
stabilized: stat /proc/bus/usb/devices: No such file or directory
Loading xennet.ko module
netfront: Initialising virtual ethernet driver.
netfront: device eth0 has flipping receive path.
Waiting for driver initialization.
Scanning and configuring dmraid supported devices
Creating root device.
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
INIT: version 2.86 booting
INIT: /etc/inittab[16]: id field too long (max 4 characters)
* Mounting /dev for udev ... [ ok ]
* Seeding /dev with needed nodes ... [ ok ]
* Setting up proper hotplug agent ...
* Using netlink for hotplug events...
[ ok ]
* Starting udevd ... [ ok ]
* Populating /dev with existing devices through uevents ... [ ok ]
* Letting udev process events ...FATAL: Could not load /lib/modules/2.6.18-53.1.13.el5xen/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.18-53.1.13.el5xen/modules.dep: No such file or directory
[ ok ]
* Finalizing udev configuration ... [ ok ]
* Mounting devpts at /dev/pts ... [ ok ]
* Checking root filesystem .../dev/sda1: clean, 39378/2562240 files, 279800/5120256 blocks
[ ok ]
* Remounting root filesystem read/write ...EXT3 FS on sda1, internal journal
[ ok ]
FATAL: Could not load /lib/modules/2.6.18-53.1.13.el5xen/modules.dep: No such file or directory
* Checking all filesystems ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Mounting USB device filesystem (usbfs) ... [ ok ]
* Mounting misc binary format filesystem ... [ ok ]
* Activating (possible) swap ...Adding 1049592k swap on /dev/sda2. Priority:-1 extents:1 across:1049592k
[ ok ]
* Setting system clock using the hardware clock [xen] ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Updating environment ... [ ok ]
* Cleaning /var/lock, /var/run ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
INIT: Entering runlevel: 3
* Mounting /dev for udev ... [ ok ]
* Seeding /dev with needed nodes ... [ ok ]
* Setting up proper hotplug agent ...
* Using netlink for hotplug events...
[ ok ]
* Starting udevd ...udevd[772]: init_udevd_socket: bind failed: Address already in use
error initializing udevd socket
udevd[772]: main: error initializing udevd socket
[ !! ]
* Populating /dev with existing devices through uevents ... [ ok ]
* Letting udev process events ...FATAL: Could not load /lib/modules/2.6.18-53.1.13.el5xen/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.18-53.1.13.el5xen/modules.dep: No such file or directory
[ ok ]
* Finalizing udev configuration ... [ ok ]
* Mounting devpts at /dev/pts ... [ ok ]
* Remounting root filesystem read-only ... [ ok ]
* Checking root filesystem .../dev/sda1: clean, 39378/2562240 files, 279800/5120256 blocks
[ ok ]
* Remounting root filesystem read/write ...EXT3 FS on sda1, internal journal
[ ok ]
FATAL: Could not load /lib/modules/2.6.18-53.1.13.el5xen/modules.dep: No such file or directory
* Checking all filesystems ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Mounting USB device filesystem (usbfs) ...mount: usbfs already mounted or /proc/bus/usb busy
mount: according to mtab, usbfs is already mounted on /proc/bus/usb
* Failed to mount USB device filesystem
[ !! ]
* Mounting misc binary format filesystem ...mount: binfmt_misc already mounted or /proc/sys/fs/binfmt_misc busy
mount: according to mtab, binfmt_misc is already mounted on /proc/sys/fs/binfmt_misc
[ !! ]
* Activating (possible) swap ... [ ok ]
* Setting system clock using the hardware clock [xen] ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Updating environment ... [ ok ]
* Cleaning /var/lock, /var/run ... [ ok ]
* Cleaning /tmp directory ...