rendered paste bodydc*CLI> Dial 812409381212
== Console is full duplex
-- Executing [812409381212@local:1] Dial("OSS/dsp", "Zap/g1/12409381212") in new stack
1 -- Making new call for cr 137
-- Requested transfer capability: 0x00 - SPEECH
1 *CLI>
> [ 00 c1 12 12 08 01 09 05 04 03 80 90 a2 18 01 81 6c 02 00 81 70 0c 80 31 32 34 30 39 33 38 31 32 31 32 a1 ]
1 *CLI>
> Informational frame:
1 > SAPI: 00 C/R: 0 EA: 0
> TEI: 096 EA: 1
1 > N(S): 009 0: 0
> N(R): 009 P: 0
> 31 bytes of data
1 -- Restarting T203 counter
1 Stopping T_203 timer
1 Starting T_200 timer
1 > Protocol Discriminator: Q.931 (8) len=31
1 > Call Ref: len= 1 (reference 9/0x9) (Originator)
1 > Message type: SETUP (5)
1 > [04 03 80 90 a2]
1 > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
1 > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
1 > Ext: 1 User information layer 1: u-Law (34)
1 > [18 01 81]
1 > Channel ID (len= 3) [ Ext: 1 IntID: Implicit Other Spare: 0 Preferred Dchan: 0
1 > ChanSel: B1 channel
1 ]
1 > [6c 02 00 81]
1 > Calling Number (len= 4) [ Ext: 0 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0)
1 > Presentation: Presentation permitted, user number passed network screening (1) '' ]
1 > [70 0c 80 31 32 34 30 39 33 38 31 32 31 32]
1 > Called Number (len=14) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) '12409381212' ]
1 > [a1]
1 > Sending Complete (len= 1)
1 q931.c:3637 q931_setup: call 137 on channel 1 enters state 1 (Call Initiated)
-- Called g1/12409381212
1 *CLI>
< [ 00 c1 01 14 ]
1
< Supervisory frame:
1 < SAPI: 00 C/R: 0 EA: 0
< TEI: 096 EA: 1
1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 010 P/F: 0
< 0 bytes of data
1 -- ACKing all packets from 8 to (but not including) 10
1 -- ACKing packet 9, new txqueue is -1 (-1 means empty)
1 -- Since there was nothing left, stopping T200 counter
1 -- Nothing left, starting T203 counter
1 -- Restarting T203 counter
1 *CLI>
< [ 02 c1 12 14 08 01 89 5a 08 02 82 95 ]
1
< Informational frame:
1 < SAPI: 00 C/R: 1 EA: 0
< TEI: 096 EA: 1
1 < N(S): 009 0: 0
< N(R): 010 P: 0
< 8 bytes of data
1 -- ACKing all packets from 9 to (but not including) 10
1 -- Since there was nothing left, stopping T200 counter
1 -- Stopping T203 counter since we got an ACK
1 -- Nothing left, starting T203 counter
1 Sending Receiver Ready (10)
1
> [ 02 c1 01 14 ]
1
> Supervisory frame:
1 > SAPI: 00 C/R: 1 EA: 0
> TEI: 096 EA: 1
1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 010 P/F: 0
> 0 bytes of data
1 -- Restarting T203 counter
1 < Protocol Discriminator: Q.931 (8) len=8
1 < Call Ref: len= 1 (reference 137/0x89) (Terminator)
1 < Message type: RELEASE COMPLETE (90)
1 < [08 02 82 95]
1 < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Public network serving the local user (2)
1 < Ext: 1 Cause: Call Rejected (21), class = Normal Event (1) ]
1 -- Processing IE 8 (cs0, Cause)
1 q931.c:4482 q931_receive: call 137 on channel 1 enters state 0 (Null)
1 -- Restarting T203 counter
-- Channel 0/1, span 1 got hangup, cause 21
-- Zap/1-1 is circuit-busy
[Feb 29 15:00:57] DEBUG[4504]: chan_zap.c:3133 zt_setoption: Set option AUDIO MODE, value: ON(1) on Zap/1-1
[Feb 29 15:00:57] DEBUG[4504]: chan_zap.c:2721 zt_hangup: Already hungup... Calling hangup once, and clearing call
1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
1 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
[Feb 29 15:00:57] DEBUG[4504]: chan_zap.c:3129 zt_setoption: Set option AUDIO MODE, value: OFF(0) on Zap/1-1
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [812409381212@local:2] Hangup("OSS/dsp", "") in new stack
== Spawn extension (local, 812409381212, 2) exited non-zero on 'OSS/dsp'
<< Hangup on console >>