rendered paste body# iwconfig rausb0
Warning: Driver for device rausb0 has been compiled with version 22
of Wireless Extension, while this program supports up to version 20.
Some things may be broken...
rausb0 RT73 WLAN ESSID:off/any Nickname:""
Mode:Auto Frequency=2.412 GHz Bit Rate=54 Mb/s
RTS thr:off Fragment thr:off
Encryption key:0000-0000-00 Security mode:open
Link Quality=0/100 Signal level:-121 dBm Noise level:-115 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
ummy0 Link encap:Ethernet HWaddr BA:95:8B:93:32:0A
BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
rausb0 Link encap:Ethernet HWaddr 00:0E:2E:CB:16:2C
inet addr:66.93.38.119 Bcast:66.93.38.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:629 errors:0 dropped:0 overruns:0 frame:0
TX packets:2790 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:69191 (67.5 KiB) TX bytes:224232 (218.9 KiB)
usb0 Link encap:Ethernet HWaddr 7E:21:04:61:8B:57
inet addr:192.168.55.25 Bcast:192.168.55.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
selected clock c01eb6c0 (pclk) quot 27, calc 113169
selected clock c01eb6c0 (pclk) quot 27, calc 113169
selected clock c01eb6c0 (pclk) quot 27, calc 113169
selected clock c01eb6c0 (pclk) quot 27, calc 113169
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
hub 1-1:1.0: port 1 not reset yet, waiting 10ms
usb 1-1.1: new full speed USB device using s3c2410-ohci and address 4
hub 1-1:1.0: port 1 not reset yet, waiting 10ms
usb 1-1.1: default language 0x0409
usb 1-1.1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: 802.11 bg WLAN
usb 1-1.1: Manufacturer: Ralink
usb 1-1.1: uevent
usb 1-1.1: usb_probe_device
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
usb 1-1.1:1.0: uevent
usb 1-1.1:1.0: uevent
rt73 1-1.1:1.0: usb_probe_interface
rt73 1-1.1:1.0: usb_probe_interface - got id
idVendor = 0x148f, idProduct = 0x2573
drivers/usb/core/inode.c: creating file '004'
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
=> usb_rtusb_open
# iwlist rausb0 scanning
Warning: Driver for device rausb0 has been compiled with version 22
of Wireless Extension, while this program supports up to version 20.
Some things may be broken...
rausb0 Scan completed :
Cell 01 - Address: 00:18:01:F4:4D:A9
Mode:Managed
ESSID:"B6NP3"
Channel:6
Encryption key:on
Bit Rates:130 Mb/s
Cell 02 - Address: 00:0E:2E:C3:4E:B0
Mode:Managed
ESSID:"thedynaplexnetwork"
Channel:11
Encryption key:on
Bit Rates:6 Mb/s