rendered paste body 1 Linux version 2.6.23.15-137.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sun Feb 10 17:48:34 EST 2008
2 BIOS-provided physical RAM map:
3 BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
4 BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
5 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
6 BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
7 BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
8 BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS)
9 BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
10 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
11 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
12 1151MB HIGHMEM available.
13 896MB LOWMEM available.
14 found SMP MP-table at 000ff780
15 Using x86 segment limits to approximate NX protection
16 Entering add_active_range(0, 0, 524208) 0 entries of 256 used
17 Zone PFN ranges:
18 DMA 0 -> 4096
19 Normal 4096 -> 229376
20 HighMem 229376 -> 524208
21 Movable zone start PFN for each node
22 early_node_map[1] active PFN ranges
23 0: 0 -> 524208
24 On node 0 totalpages: 524208
25 DMA zone: 32 pages used for memmap
26 DMA zone: 0 pages reserved
27 DMA zone: 4064 pages, LIFO batch:0
28 Normal zone: 1760 pages used for memmap
29 Normal zone: 223520 pages, LIFO batch:31
30 HighMem zone: 2303 pages used for memmap
31 HighMem zone: 292529 pages, LIFO batch:31
32 Movable zone: 0 pages used for memmap
33 DMI present.
34 Using APIC driver default
35 ACPI: RSDP 000F88C0, 0014 (r0 MSI_NB)
36 ACPI: RSDT 7FFB0000, 0040 (r1 MSI_NB MEGABOOK 20070726 MSFT 97)
37 ACPI: FACP 7FFB0200, 0084 (r2 MSI_NB MEGABOOK 20070726 MSFT 97)
38 ACPI: DSDT 7FFB05B0, 4BF8 (r1 MSI_NB MEGABOOK 0 INTL 20051117)
39 ACPI: FACS 7FFBE000, 0040
40 ACPI: APIC 7FFB0390, 005C (r1 MSI_NB MEGABOOK 20070726 MSFT 97)
41 ACPI: MCFG 7FFB03F0, 003C (r1 MSI_NB MEGABOOK 20070726 MSFT 97)
42 ACPI: SLIC 7FFB0430, 0176 (r1 MSI_NB MEGABOOK 20070726 MSFT 97)
43 ACPI: OEMB 7FFBE040, 0071 (r1 MSI_NB MEGABOOK 20070726 MSFT 97)
44 ACPI: HPET 7FFB51B0, 0038 (r1 MSI_NB OEMHPET 20070726 MSFT 97)
45 ACPI: SSDT 7FFBE960, 04E6 (r1 PmRef CpuPm 3000 INTL 20051117)
46 ACPI: PM-Timer IO Port: 0x808
47 ACPI: Local APIC address 0xfee00000
48 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
49 Processor #0 6:15 APIC version 20
50 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
51 Processor #1 6:15 APIC version 20
52 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
53 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
54 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
55 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
56 ACPI: IRQ0 used by override.
57 ACPI: IRQ2 used by override.
58 ACPI: IRQ9 used by override.
59 Enabling APIC mode: Flat. Using 1 I/O APICs
60 ACPI: HPET id: 0xffffffff base: 0xfed00000
61 Using ACPI (MADT) for SMP configuration information
62 Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
63 swsusp: Registered nosave memory region: 000000000009a000 - 000000000009b000
64 swsusp: Registered nosave memory region: 000000000009b000 - 00000000000a0000
65 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
66 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
67 Built 1 zonelists in Zone order. Total pages: 520113
68 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
69 mapped APIC to ffffb000 (fee00000)
70 mapped IOAPIC to ffffa000 (fec00000)
71 Enabling fast FPU save and restore... done.
72 Enabling unmasked SIMD FPU exception support... done.
73 Initializing CPU#0
74 CPU 0 irqstacks, hard=c07a9000 soft=c0789000
75 PID hash table entries: 4096 (order: 12, 16384 bytes)
76 Detected 1995.072 MHz processor.
77 Console: colour VGA+ 80x25
78 console [tty0] enabled
79 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
80 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
81 Memory: 2070224k/2096832k available (2187k kernel code, 25356k reserved, 1118k data, 280k init, 1179328k highmem)
82 virtual kernel memory layout:
83 fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
84 pkmap : 0xff800000 - 0xffc00000 (4096 kB)
85 vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
86 lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
87 .init : 0xc0740000 - 0xc0786000 ( 280 kB)
88 .data : 0xc0622d15 - 0xc073a544 (1118 kB)
89 .text : 0xc0400000 - 0xc0622d15 (2187 kB)
90 Checking if this processor honours the WP bit even in supervisor mode... Ok.
91 SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
92 hpet clockevent registered
93 Calibrating delay using timer specific routine.. 3993.62 BogoMIPS (lpj=1996811)
94 Security Framework v1.0.0 initialized
95 SELinux: Initializing.
96 SELinux: Starting in permissive mode
97 selinux_register_security: Registering secondary module capability
98 Capability LSM initialized as secondary
99 Mount-cache hash table entries: 512
100 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
101 monitor/mwait feature present.
102 using mwait in idle threads.
103 CPU: L1 I cache: 32K, L1 D cache: 32K
104 CPU: L2 cache: 2048K
105 CPU: Physical Processor ID: 0
106 CPU: Processor Core ID: 0
107 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
108 Intel machine check architecture supported.
109 Intel machine check reporting enabled on CPU#0.
110 Compat vDSO mapped to ffffe000.
111 Checking 'hlt' instruction... OK.
112 SMP alternatives: switching to UP code
113 ACPI: Core revision 20070126
114 CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
115 SMP alternatives: switching to SMP code
116 Booting processor 1/1 eip 3000
117 CPU 1 irqstacks, hard=c07aa000 soft=c078a000
118 Initializing CPU#1
119 Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=1995015)
120 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
121 monitor/mwait feature present.
122 CPU: L1 I cache: 32K, L1 D cache: 32K
123 CPU: L2 cache: 2048K
124 CPU: Physical Processor ID: 0
125 CPU: Processor Core ID: 1
126 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
127 Intel machine check architecture supported.
128 Intel machine check reporting enabled on CPU#1.
129 CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
130 Total of 2 processors activated (7983.65 BogoMIPS).
131 ENABLING IO-APIC IRQs
132 ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
133 checking TSC synchronization [CPU#0 -> CPU#1]: passed.
134 Brought up 2 CPUs
135 sizeof(vma)=84 bytes
136 sizeof(page)=32 bytes
137 sizeof(inode)=336 bytes
138 sizeof(dentry)=132 bytes
139 sizeof(ext3inode)=488 bytes
140 sizeof(buffer_head)=56 bytes
141 sizeof(skbuff)=180 bytes
142 sizeof(task_struct)=1552 bytes
143 Booting paravirtualized kernel on bare hardware
144 Time: 23:11:03 Date: 02/26/08
145 NET: Registered protocol family 16
146 No dock devices found.
147 ACPI: bus type pci registered
148 PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8
149 PCI: Using configuration type 1
150 Setting up standard PCI resources
151 ACPI: EC: Look up EC in DSDT
152 ACPI: Interpreter enabled
153 ACPI: (supports S0 S1 S3 S4 S5)
154 ACPI: Using IOAPIC for interrupt routing
155 Error attaching device data
156 Error attaching device data
157 ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
158 ACPI: PCI Root Bridge [PCI0] (0000:00)
159 PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
160 PCI quirk: region 0500-053f claimed by ICH6 GPIO
161 PCI: Transparent bridge - 0000:00:1e.0
162 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
163 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
164 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
165 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
166 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
167 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
168 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
169 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
170 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
171 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
172 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
173 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
174 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
175 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
176 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
177 ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
178 ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 5D, should be 88 [20070126]
179 Linux Plug and Play Support v0.97 (c) Adam Belay
180 pnp: PnP ACPI init
181 ACPI: bus type pnp registered
182 pnp: PnP ACPI: found 14 devices
183 ACPI: ACPI bus type pnp unregistered
184 usbcore: registered new interface driver usbfs
185 usbcore: registered new interface driver hub
186 usbcore: registered new device driver usb
187 PCI: Using ACPI for IRQ routing
188 PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
189 NetLabel: Initializing
190 NetLabel: domain hash size = 128
191 NetLabel: protocols = UNLABELED CIPSOv4
192 NetLabel: unlabeled traffic allowed by default
193 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
194 hpet0: 3 64-bit timers, 14318180 Hz
195 Time: tsc clocksource has been installed.
196 pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
197 pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
198 pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
199 pnp: 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
200 pnp: 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
201 pnp: 00:0a: iomem range 0xfed40000-0xfed8ffff has been reserved
202 pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
203 pnp: 00:0c: ioport range 0x400-0x41f has been reserved
204 pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
205 pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
206 pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
207 pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
208 PCI: Bridge: 0000:00:01.0
209 IO window: c000-cfff
210 MEM window: f8a00000-feafffff
211 PREFETCH window: bff00000-dfefffff
212 PCI: Bridge: 0000:00:1c.0
213 IO window: disabled.
214 MEM window: disabled.
215 PREFETCH window: disabled.
216 PCI: Bridge: 0000:00:1c.1
217 IO window: disabled.
218 MEM window: disabled.
219 PREFETCH window: disabled.
220 PCI: Bridge: 0000:00:1c.2
221 IO window: a000-afff
222 MEM window: f8000000-f87fffff
223 PREFETCH window: bdf00000-bfefffff
224 PCI: Bridge: 0000:00:1c.3
225 IO window: disabled.
226 MEM window: f8800000-f88fffff
227 PREFETCH window: disabled.
228 PCI: Bridge: 0000:00:1c.4
229 IO window: b000-bfff
230 MEM window: f8900000-f89fffff
231 PREFETCH window: disabled.
232 PCI: Bridge: 0000:00:1e.0
233 IO window: disabled.
234 MEM window: f7f00000-f7ffffff
235 PREFETCH window: disabled.
236 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
237 PCI: Setting latency timer of device 0000:00:01.0 to 64
238 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
239 PCI: Setting latency timer of device 0000:00:1c.0 to 64
240 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
241 PCI: Setting latency timer of device 0000:00:1c.1 to 64
242 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
243 PCI: Setting latency timer of device 0000:00:1c.2 to 64
244 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
245 PCI: Setting latency timer of device 0000:00:1c.3 to 64
246 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
247 PCI: Setting latency timer of device 0000:00:1c.4 to 64
248 PCI: Setting latency timer of device 0000:00:1e.0 to 64
249 NET: Registered protocol family 2
250 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
251 TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
252 TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
253 TCP: Hash tables configured (established 131072 bind 65536)
254 TCP reno registered
255 checking if image is initramfs... it is
256 Switched to high resolution mode on CPU 1
257 Switched to high resolution mode on CPU 0
258 Freeing initrd memory: 3625k freed
259 apm: BIOS not found.
260 audit: initializing netlink socket (disabled)
261 audit(1204067462.541:1): initialized
262 highmem bounce pool size: 64 pages
263 Total HugeTLB memory allocated, 0
264 VFS: Disk quotas dquot_6.5.1
265 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
266 SELinux: Registering netfilter hooks
267 ksign: Installing public key data
268 Loading keyring
269 - Added public key 433CDEB37FB53040
270 - User ID: Red Hat, Inc. (Kernel Module GPG key)
271 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
272 io scheduler noop registered
273 io scheduler anticipatory registered
274 io scheduler deadline registered
275 io scheduler cfq registered (default)
276 Boot video device is 0000:08:00.0
277 PCI: Setting latency timer of device 0000:00:01.0 to 64
278 assign_interrupt_mode Found MSI capability
279 Allocate Port Service[0000:00:01.0:pcie00]
280 Allocate Port Service[0000:00:01.0:pcie02]
281 PCI: Setting latency timer of device 0000:00:1c.0 to 64
282 assign_interrupt_mode Found MSI capability
283 Allocate Port Service[0000:00:1c.0:pcie00]
284 Allocate Port Service[0000:00:1c.0:pcie02]
285 PCI: Setting latency timer of device 0000:00:1c.1 to 64
286 assign_interrupt_mode Found MSI capability
287 Allocate Port Service[0000:00:1c.1:pcie00]
288 Allocate Port Service[0000:00:1c.1:pcie02]
289 PCI: Setting latency timer of device 0000:00:1c.2 to 64
290 assign_interrupt_mode Found MSI capability
291 Allocate Port Service[0000:00:1c.2:pcie00]
292 Allocate Port Service[0000:00:1c.2:pcie02]
293 PCI: Setting latency timer of device 0000:00:1c.3 to 64
294 assign_interrupt_mode Found MSI capability
295 Allocate Port Service[0000:00:1c.3:pcie00]
296 Allocate Port Service[0000:00:1c.3:pcie02]
297 PCI: Setting latency timer of device 0000:00:1c.4 to 64
298 assign_interrupt_mode Found MSI capability
299 Allocate Port Service[0000:00:1c.4:pcie00]
300 Allocate Port Service[0000:00:1c.4:pcie02]
301 pci_hotplug: PCI Hot Plug PCI Core version: 0.5
302 ACPI: SSDT 7FFBE190, 027A (r1 PmRef Cpu0Ist 3000 INTL 20051117)
303 ACPI: SSDT 7FFBE4A0, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
304 Monitor-Mwait will be used to enter C-1 state
305 Monitor-Mwait will be used to enter C-2 state
306 Monitor-Mwait will be used to enter C-3 state
307 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
308 ACPI: SSDT 7FFBE0C0, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20051117)
309 ACPI: SSDT 7FFBE410, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051117)
310 ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
311 ACPI: Thermal Zone [THRM] (68 C)
312 isapnp: Scanning for PnP cards...
313 isapnp: No Plug & Play device found
314 Real Time Clock Driver v1.12ac
315 hpet_resources: 0xfed00000 is busy
316 Non-volatile memory driver v1.2
317 Linux agpgart interface v0.102
318 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
319 RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
320 input: Macintosh mouse button emulation as /class/input/input0
321 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
322 i8042.c: Detected active multiplexing controller, rev 1.1.
323 serio: i8042 KBD port at 0x60,0x64 irq 1
324 serio: i8042 AUX0 port at 0x60,0x64 irq 12
325 serio: i8042 AUX1 port at 0x60,0x64 irq 12
326 serio: i8042 AUX2 port at 0x60,0x64 irq 12
327 serio: i8042 AUX3 port at 0x60,0x64 irq 12
328 mice: PS/2 mouse device common for all mice
329 input: AT Translated Set 2 keyboard as /class/input/input1
330 cpuidle: using governor menu
331 usbcore: registered new interface driver hiddev
332 Marking TSC unstable due to: TSC halts in idle.
333 usbcore: registered new interface driver usbhid
334 drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
335 TCP cubic registered
336 Initializing XFRM netlink socket
337 NET: Registered protocol family 1
338 NET: Registered protocol family 17
339 Using IPI No-Shortcut mode
340 Magic number: 12:984:201
341 Freeing unused kernel memory: 280k freed
342 Write protecting the kernel read-only data: 850k
343 Time: hpet clocksource has been installed.
344 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
345 PCI: Setting latency timer of device 0000:00:1a.7 to 64
346 ehci_hcd 0000:00:1a.7: EHCI Host Controller
347 ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
348 ehci_hcd 0000:00:1a.7: debug port 1
349 PCI: cache line size of 32 is not supported by device 0000:00:1a.7
350 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff000
351 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
352 usb usb1: configuration #1 chosen from 1 choice
353 hub 1-0:1.0: USB hub found
354 hub 1-0:1.0: 4 ports detected
355 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
356 PCI: Setting latency timer of device 0000:00:1d.7 to 64
357 ehci_hcd 0000:00:1d.7: EHCI Host Controller
358 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
359 ehci_hcd 0000:00:1d.7: debug port 1
360 PCI: cache line size of 32 is not supported by device 0000:00:1d.7
361 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebff400
362 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
363 usb usb2: configuration #1 chosen from 1 choice
364 hub 2-0:1.0: USB hub found
365 hub 2-0:1.0: 6 ports detected
366 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
367 USB Universal Host Controller Interface driver v3.0
368 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
369 PCI: Setting latency timer of device 0000:00:1a.0 to 64
370 uhci_hcd 0000:00:1a.0: UHCI Host Controller
371 uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
372 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
373 usb usb3: configuration #1 chosen from 1 choice
374 hub 3-0:1.0: USB hub found
375 hub 3-0:1.0: 2 ports detected
376 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
377 PCI: Setting latency timer of device 0000:00:1a.1 to 64
378 uhci_hcd 0000:00:1a.1: UHCI Host Controller
379 uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
380 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
381 usb usb4: configuration #1 chosen from 1 choice
382 hub 4-0:1.0: USB hub found
383 hub 4-0:1.0: 2 ports detected
384 input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
385 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
386 PCI: Setting latency timer of device 0000:00:1d.0 to 64
387 uhci_hcd 0000:00:1d.0: UHCI Host Controller
388 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
389 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e080
390 usb usb5: configuration #1 chosen from 1 choice
391 hub 5-0:1.0: USB hub found
392 hub 5-0:1.0: 2 ports detected
393 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
394 PCI: Setting latency timer of device 0000:00:1d.1 to 64
395 uhci_hcd 0000:00:1d.1: UHCI Host Controller
396 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
397 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
398 usb usb6: configuration #1 chosen from 1 choice
399 hub 6-0:1.0: USB hub found
400 hub 6-0:1.0: 2 ports detected
401 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
402 PCI: Setting latency timer of device 0000:00:1d.2 to 64
403 uhci_hcd 0000:00:1d.2: UHCI Host Controller
404 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
405 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00
406 usb usb7: configuration #1 chosen from 1 choice
407 hub 7-0:1.0: USB hub found
408 hub 7-0:1.0: 2 ports detected
409 SCSI subsystem initialized
410 libata version 2.21 loaded.
411 ahci 0000:00:1f.2: version 2.3
412 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
413 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
414 ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part
415 PCI: Setting latency timer of device 0000:00:1f.2 to 64
416 scsi0 : ahci
417 scsi1 : ahci
418 scsi2 : ahci
419 ata1: SATA max UDMA/133 cmd 0xf8848900 ctl 0x00000000 bmdma 0x00000000 irq 217
420 ata2: SATA max UDMA/133 cmd 0xf8848980 ctl 0x00000000 bmdma 0x00000000 irq 217
421 ata3: SATA max UDMA/133 cmd 0xf8848a00 ctl 0x00000000 bmdma 0x00000000 irq 217
422 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
423 ata1.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133
424 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
425 ata1.00: configured for UDMA/133
426 ata2: SATA link down (SStatus 0 SControl 300)
427 ata3: SATA link down (SStatus 0 SControl 300)
428 scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 04.0 PQ: 0 ANSI: 5
429 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
430 sd 0:0:0:0: [sda] Write Protect is off
431 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
432 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
433 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
434 sd 0:0:0:0: [sda] Write Protect is off
435 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
436 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
437 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
438 sd 0:0:0:0: [sda] Attached SCSI disk
439 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
440 ata_piix 0000:00:1f.1: version 2.12
441 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
442 PCI: Setting latency timer of device 0000:00:1f.1 to 64
443 scsi3 : ata_piix
444 scsi4 : ata_piix
445 ata4: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
446 ata5: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
447 ata4.00: ATAPI: Optiarc DVD RW AD-7530B, NX02, max UDMA/33
448 ata4.00: configured for UDMA/33
449 ata5: port disabled. ignoring.
450 scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NX02 PQ: 0 ANSI: 5
451 kjournald starting. Commit interval 5 seconds
452 EXT3-fs: mounted filesystem with ordered data mode.
453 SELinux: Disabled at runtime.
454 SELinux: Unregistering netfilter hooks
455 audit(1204067472.491:2): selinux=0 auid=4294967295
456 sd 0:0:0:0: Attached scsi generic sg0 type 0
457 scsi 3:0:0:0: Attached scsi generic sg1 type 5
458 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
459 Uniform CD-ROM driver Revision: 3.20
460 sr 3:0:0:0: Attached scsi CD-ROM sr0
461 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
462 ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
463 PCI: Setting latency timer of device 0000:07:00.0 to 64
464 eth0: RTL8168b/8111b at 0xf8896000, 00:19:db:eb:9e:0f, XID 38000000 IRQ 16
465 input: PC Speaker as /class/input/input3
466 input: Power Button (FF) as /class/input/input4
467 ACPI: Power Button (FF) [PWRF]
468 input: Lid Switch as /class/input/input5
469 ACPI: Lid Switch [LID0]
470 input: Power Button (CM) as /class/input/input6
471 ACPI: Power Button (CM) [PWRB]
472 ACPI: Battery Slot [BAT1] (battery present)
473 ACPI: AC Adapter [ADP1] (on-line)
474 iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23kds
475 iwl4965: Copyright(c) 2003-2007 Intel Corporation
476 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
477 PCI: Setting latency timer of device 0000:06:00.0 to 64
478 iwl4965: Detected Intel Wireless WiFi Link 4965AGN
479 phy0: Selected rate control algorithm 'iwl-4965-rs'
480 sdhci: Secure Digital Host Controller Interface driver
481 sdhci: Copyright(c) Pierre Ossman
482 input: Video Bus as /class/input/input7
483 atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
484 atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
485 atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
486 atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
487 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
488 ACPI: PCI interrupt for device 0000:06:00.0 disabled
489 sdhci: SDHCI controller found at 0000:01:04.2 [1217:7120] (rev 1)
490 ACPI: PCI Interrupt 0000:01:04.2[A] -> GSI 17 (level, low) -> IRQ 17
491 mmc0: SDHCI at 0xf7ffe400 irq 17 PIO
492 ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 17 (level, low) -> IRQ 17
493 firewire_ohci: Added fw-ohci device 0000:01:04.0, OHCI version 1.10
494 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
495 PCI: Setting latency timer of device 0000:00:1b.0 to 64
496 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
497 si3054: cannot initialize. EXT MID = 0000
498 Clocksource tsc unstable (delta = -85570525 ns)
499 firewire_core: created device fw0: GUID 00dc10005f122001, S400
500 NET: Registered protocol family 10
501 lo: Disabled Privacy Extensions
502 ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
503 device-mapper: multipath: version 1.0.5 loaded
504 loop: module loaded
505 EXT3 FS on dm-0, internal journal
506 kjournald starting. Commit interval 5 seconds
507 EXT3 FS on dm-1, internal journal
508 EXT3-fs: mounted filesystem with ordered data mode.
509 kjournald starting. Commit interval 5 seconds
510 EXT3 FS on sda5, internal journal
511 EXT3-fs: mounted filesystem with ordered data mode.
512 Adding 2850808k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2850808k
513 IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
514 r8169: eth0: link up
515 r8169: eth0: link up
516 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
517 iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
518 ADDRCONF(NETDEV_UP): wlan0: link is not ready
519 eth0: no IPv6 routers present
520 atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
521 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
522 atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
523 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
524 atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
525 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
526 atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
527 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
528 atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
529 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
530 atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
531 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
532 atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
533 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
534 atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
535 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
536 atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
537 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
538 atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
539 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
540 atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
541 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
542 atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
543 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
544 atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
545 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
546 atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
547 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
548 atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
549 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
550 atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
551 atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
552 audit(1204067551.313:3): audit_pid=2250 old=0 by auid=4294967295
553 Bluetooth: Core ver 2.11
554 NET: Registered protocol family 31
555 Bluetooth: HCI device and connection manager initialized
556 Bluetooth: HCI socket layer initialized
557 Bluetooth: L2CAP ver 2.8
558 Bluetooth: L2CAP socket layer initialized
559 Bluetooth: RFCOMM socket layer initialized
560 Bluetooth: RFCOMM TTY layer initialized
561 Bluetooth: RFCOMM ver 1.8