<?xml version = "1.0" encoding = "UTF-8"?><!-- DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. Copyright 1997-2007 Sun Microsystems, Inc. All rights reserved. The contents of this file are subject to the terms of either the GNU General Public License Version 2 only ("GPL") or the Common Development and Distribution License("CDDL") (collectively, the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the License at https://glassfish.dev.java.net/public/CDDL+GPL.html or glassfish/bootstrap/legal/LICENSE.txt. See the License for the specific language governing permissions and limitations under the License. When distributing the software, include this License Header Notice in each file and include the License file at glassfish/bootstrap/legal/LICENSE.txt. Sun designates this particular file as subject to the "Classpath" exception as provided by Sun in the GPL Version 2 section of the License file that accompanied this code. If applicable, add the following below the License Header, with the fields enclosed by brackets [] replaced by your own identifying information: "Portions Copyrighted [year] [name of copyright owner]" Contributor(s): If you wish your version of this file to be governed by only the CDDL or only the GPL Version 2, indicate your decision by adding "[Contributor] elects to include this software in this distribution under the [CDDL or GPL Version 2] license." If you don't indicate a single choice of license, a recipient has the option to distribute your version of this file under either the CDDL, the GPL Version 2 or to extend the choice of license to its licensees as provided above. However, if you add GPL Version 2 code and therefore, elected the GPL Version 2 license, then the option applies only if the new code is made subject to such option by the copyright holder.--><xsd:schema targetNamespace="http://java.sun.com/xml/ns/javaee" xmlns:javaee="http://java.sun.com/xml/ns/javaee" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xml="http://www.w3.org/XML/1998/namespace" elementFormDefault="qualified" attributeFormDefault="unqualified" version="2.0"> <xsd:annotation> <xsd:documentation> $Id: web-facesconfig_2_0.xsd,v 1.1.10.1 2008/02/20 19:02:47 edburns Exp $ </xsd:documentation> </xsd:annotation> <xsd:annotation> <xsd:documentation> Copyright 2007 Sun Microsystems, Inc., 901 San Antonio Road, Palo Alto, California 94303, U.S.A. All rights reserved. Sun Microsystems, Inc. has intellectual property rights relating to technology described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the U.S. patents listed at http://www.sun.com/patents and one or more additional patents or pending patent applications in the U.S. and other countries. This document and the technology which it describes are distributed under licenses restricting their use, copying, distribution, and decompilation. No part of this document may be reproduced in any form by any means without prior written authorization of Sun and its licensors, if any. Third-party software, including font technology, is copyrighted and licensed from Sun suppliers. Sun, Sun Microsystems, the Sun logo, Solaris, Java, Java EE, JavaServer Pages, Enterprise JavaBeans and the Java Coffee Cup logo are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Federal Acquisitions: Commercial Software - Government Users Subject to Standard License Terms and Conditions. </xsd:documentation> </xsd:annotation> <xsd:annotation> <xsd:documentation> <![CDATA[ The XML Schema for the JavaServer Faces Application Configuration File (Version 2.0). All JavaServer Faces configuration files must indicate the JavaServer Faces schema by indicating the JavaServer Faces namespace: http://java.sun.com/xml/ns/javaee and by indicating the version of the schema by using the version element as shown below: <faces-config xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="..." version="2.0"> ... </faces-config> The instance documents may indicate the published version of the schema using xsi:schemaLocation attribute for javaee namespace with the following location: http://java.sun.com/xml/ns/javaee/web-facesconfig_2_0.xsd ]]> </xsd:documentation> </xsd:annotation> <xsd:include schemaLocation="javaee_5.xsd"/> <!-- **************************************************** --> <xsd:element name = "faces-config" type="javaee:faces-configType"> <xsd:annotation> <xsd:documentation> The "faces-config" element is the root of the configuration information hierarchy, and contains nested elements for all of the other configuration settings. </xsd:documentation> </xsd:annotation> <xsd:unique name="faces-config-converter-ID-uniqueness"> <xsd:annotation> <xsd:documentation> Converter IDs must be unique within a document. </xsd:documentation> </xsd:annotation> <xsd:selector xpath="javaee:converter"/> <xsd:field xpath="javaee:converter-id"/> </xsd:unique> <xsd:unique name="faces-config-converter-for-class-uniqueness"> <xsd:annotation> <xsd:documentation> 'converter-for-class' element values must be unique within a document. </xsd:documentation> </xsd:annotation> <xsd:selector xpath="javaee:converter"/> <xsd:field xpath="javaee:converter-for-class"/> </xsd:unique> <xsd:unique name="faces-config-validator-ID-uniqueness"> <xsd:annotation> <xsd:documentation> Validator IDs must be unique within a document. </xsd:documentation> </xsd:annotation> <xsd:selector xpath="javaee:validator"/> <xsd:field xpath="javaee:validator-id"/> </xsd:unique> <xsd:unique name="faces-config-managed-bean-name-uniqueness"> <xsd:annotation> <xsd:documentation> Managed bean names must be unique within a document. </xsd:documentation> </xsd:annotation> <xsd:selector xpath="javaee:managed-bean"/> <xsd:field xpath="javaee:managed-bean-name"/> </xsd:unique> </xsd:element> <!-- **************************************************** --> <xsd:complexType name="faces-configType"> <xsd:annotation> <xsd:documentation> The "faces-config" element is the root of the configuration information hierarchy, and contains nested elements for all of the other configuration settings. </xsd:documentation> </xsd:annotation> <xsd:choice minOccurs="0" maxOccurs="unbounded"> <xsd:element name="application" type="javaee:faces-config-applicationType"/> <xsd:element name="factory" type="javaee:faces-config-factoryType"/> <xsd:element name="component" type="javaee:faces-config-componentType"/> <xsd:element name="converter" type="javaee:faces-config-converterType"/> <xsd:element name="managed-bean" type="javaee:faces-config-managed-beanType"/> <xsd:element name="navigation-rule" type="javaee:faces-config-navigation-ruleType"/> <xsd:element name="referenced-bean" type="javaee:faces-config-referenced-beanType"/> <xsd:element name="render-kit" type="javaee:faces-config-render-kitType"/> <xsd:element name="lifecycle" type="javaee:faces-config-lifecycleType"/> <xsd:element name="validator" type="javaee:faces-config-validatorType"/> <xsd:element name="faces-config-extension" type="javaee:faces-config-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:choice> <xsd:attribute name = "id" type = "xsd:ID"/> <xsd:attribute name="version" type="javaee:faces-config-versionType" use="required"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name = "faces-config-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for faces-config. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-applicationType"> <xsd:annotation> <xsd:documentation> The "application" element provides a mechanism to define the various per-application-singleton implementation artifacts for a particular web application that is utilizing JavaServer Faces. For nested elements that are not specified, the JSF implementation must provide a suitable default. </xsd:documentation> </xsd:annotation> <xsd:choice minOccurs="0" maxOccurs="unbounded"> <xsd:element name="action-listener" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "action-listener" element contains the fully qualified class name of the concrete ActionListener implementation class that will be called during the Invoke Application phase of the request processing lifecycle. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="default-render-kit-id" type="javaee:string"> <xsd:annotation> <xsd:documentation> The "default-render-kit-id" element allows the application to define a renderkit to be used other than the standard one. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="message-bundle" type="javaee:string"> <xsd:annotation> <xsd:documentation> The base name of a resource bundle representing the message resources for this application. See the JavaDocs for the "java.util.ResourceBundle" class for more information on the syntax of resource bundle names. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="navigation-handler" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "navigation-handler" element contains the fully qualified class name of the concrete NavigationHandler implementation class that will be called during the Invoke Application phase of the request processing lifecycle, if the default ActionListener (provided by the JSF implementation) is used. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="view-handler" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "view-handler" element contains the fully qualified class name of the concrete ViewHandler implementation class that will be called during the Restore View and Render Response phases of the request processing lifecycle. The faces implementation must provide a default implementation of this class. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="state-manager" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "state-manager" element contains the fully qualified class name of the concrete StateManager implementation class that will be called during the Restore View and Render Response phases of the request processing lifecycle. The faces implementation must provide a default implementation of this class. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="el-resolver" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "el-resolver" element contains the fully qualified class name of the concrete javax.el.ELResolver implementation class that will be used during the processing of EL expressions. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="property-resolver" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "property-resolver" element contains the fully qualified class name of the concrete PropertyResolver implementation class that will be used during the processing of value binding expressions. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="variable-resolver" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "variable-resolver" element contains the fully qualified class name of the concrete VariableResolver implementation class that will be used during the processing of value binding expressions. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="resource-handler" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> <![CDATA[ RELEASE_PENDING (edburns, roger) add docs ]]> </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="locale-config" type="javaee:faces-config-locale-configType"/> <xsd:element name="resource-bundle" type="javaee:faces-config-application-resource-bundleType"/> <xsd:element name="application-extension" type="javaee:faces-config-application-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:choice> <xsd:attribute name = "id" type = "xsd:ID"/> </xsd:complexType> <xsd:complexType name="faces-config-application-resource-bundleType"> <xsd:annotation> <xsd:documentation> The resource-bundle element inside the application element references a java.util.ResourceBundle instance by name using the var element. ResourceBundles referenced in this manner may be returned by a call to Application.getResourceBundle() passing the current FacesContext for this request and the value of the var element below. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="base-name" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The fully qualified class name of the java.util.ResourceBundle instance. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="var" type="javaee:string"> <xsd:annotation> <xsd:documentation> The name by which this ResourceBundle instance is retrieved by a call to Application.getResourceBundle(). </xsd:documentation> </xsd:annotation> </xsd:element> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name = "faces-config-application-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for application. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name = "faces-config-factoryType"> <xsd:annotation> <xsd:documentation> The "factory" element provides a mechanism to define the various Factories that comprise parts of the implementation of JavaServer Faces. For nested elements that are not specified, the JSF implementation must provide a suitable default. </xsd:documentation> </xsd:annotation> <xsd:choice minOccurs="0" maxOccurs="unbounded"> <xsd:element name="application-factory" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "application-factory" element contains the fully qualified class name of the concrete ApplicationFactory implementation class that will be called when FactoryFinder.getFactory(APPLICATION_FACTORY) is called. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="faces-context-factory" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "faces-context-factory" element contains the fully qualified class name of the concrete FacesContextFactory implementation class that will be called when FactoryFinder.getFactory(FACES_CONTEXT_FACTORY) is called. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="lifecycle-factory" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "lifecycle-factory" element contains the fully qualified class name of the concrete LifecycleFactory implementation class that will be called when FactoryFinder.getFactory(LIFECYCLE_FACTORY) is called. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="render-kit-factory" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "render-kit-factory" element contains the fully qualified class name of the concrete RenderKitFactory implementation class that will be called when FactoryFinder.getFactory(RENDER_KIT_FACTORY) is called. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="factory-extension" type="javaee:faces-config-factory-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:choice> <xsd:attribute name = "id" type = "xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name = "faces-config-factory-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for factory. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-attributeType"> <xsd:annotation> <xsd:documentation> The "attribute" element represents a named, typed, value associated with the parent UIComponent via the generic attributes mechanism. Attribute names must be unique within the scope of the parent (or related) component. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="attribute-name" type="javaee:string"> <xsd:annotation> <xsd:documentation> The "attribute-name" element represents the name under which the corresponding value will be stored, in the generic attributes of the UIComponent we are related to. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="attribute-class" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "attribute-class" element represents the Java type of the value associated with this attribute name. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="default-value" type="javaee:faces-config-default-valueType" minOccurs="0"/> <xsd:element name="suggested-value" type="javaee:faces-config-suggested-valueType" minOccurs="0"/> <xsd:element name="attribute-extension" type="javaee:faces-config-attribute-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> <xsd:attribute name = "id" type = "xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name = "faces-config-attribute-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for attribute. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-componentType"> <xsd:annotation> <xsd:documentation> The "component" element represents a concrete UIComponent implementation class that should be registered under the specified type identifier, along with its associated properties and attributes. Component types must be unique within the entire web application. Nested "attribute" elements identify generic attributes that are recognized by the implementation logic of this component. Nested "property" elements identify JavaBeans properties of the component class that may be exposed for manipulation via tools. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="component-type" type="javaee:string"> <xsd:annotation> <xsd:documentation> The "component-type" element represents the name under which the corresponding UIComponent class should be registered. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="component-class" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "component-class" element represents the fully qualified class name of a concrete UIComponent implementation class. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="facet" type="javaee:faces-config-facetType" minOccurs="0" maxOccurs="unbounded"/> <xsd:element name="attribute" type="javaee:faces-config-attributeType" minOccurs="0" maxOccurs="unbounded"/> <xsd:element name="property" type="javaee:faces-config-propertyType" minOccurs="0" maxOccurs="unbounded"/> <xsd:element name="component-extension" type="javaee:faces-config-component-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-component-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for component. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-default-localeType"> <xsd:annotation> <xsd:documentation> The "default-locale" element declares the default locale for this application instance. It must be specified as :language:[_:country:[_:variant:]] without the colons, for example "ja_JP_SJIS". The separators between the segments may be '-' or '_'. </xsd:documentation> </xsd:annotation> <xsd:simpleContent> <xsd:extension base="javaee:faces-config-localeType"> <xsd:attribute name="id" type="xsd:ID"/> </xsd:extension> </xsd:simpleContent> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-default-valueType"> <xsd:annotation> <xsd:documentation> The "default-value" contains the value for the property or attribute in which this element resides. This value differs from the "suggested-value" in that the property or attribute must take the value, whereas in "suggested-value" taking the value is optional. </xsd:documentation> </xsd:annotation> <xsd:simpleContent> <xsd:restriction base="javaee:string"/> </xsd:simpleContent> </xsd:complexType> <!-- **************************************************** --> <xsd:simpleType name="faces-config-el-expressionType"> <xsd:annotation> <xsd:documentation> EL expressions present within a faces config file must start with the character sequence of '#{' and end with '}'. </xsd:documentation> </xsd:annotation> <xsd:restriction base="xsd:string"> <xsd:pattern value="#\{.*\}"/> </xsd:restriction> </xsd:simpleType> <!-- **************************************************** --> <xsd:complexType name="faces-config-facetType"> <xsd:annotation> <xsd:documentation> Define the name and other design-time information for a facet that is associated with a renderer or a component. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="facet-name" type="javaee:java-identifierType"> <xsd:annotation> <xsd:documentation> The "facet-name" element represents the facet name under which a UIComponent will be added to its parent. It must be of type "Identifier". </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="facet-extension" type="javaee:faces-config-facet-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-facet-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for facet. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-from-view-idType"> <xsd:annotation> <xsd:documentation> The value of from-view-id must contain one of the following values: - The exact match for a view identifier that is recognized by the the ViewHandler implementation being used (such as "/index.jsp" if you are using the default ViewHandler). - A proper prefix of a view identifier, plus a trailing "*" character. This pattern indicates that all view identifiers that match the portion of the pattern up to the asterisk will match the surrounding rule. When more than one match exists, the match with the longest pattern is selected. - An "*" character, which means that this pattern applies to all view identifiers. </xsd:documentation> </xsd:annotation> <xsd:simpleContent> <xsd:restriction base="javaee:string"/> </xsd:simpleContent> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-from-actionType"> <xsd:annotation> <xsd:documentation> The "from-action" element contains an action reference expression that must have been executed (by the default ActionListener for handling application level events) in order to select the navigation rule. If not specified, this rule will be relevant no matter which action reference was executed (or if no action reference was executed). </xsd:documentation> </xsd:annotation> <xsd:simpleContent> <xsd:extension base="javaee:faces-config-el-expressionType"> <xsd:attribute name="id" type="xsd:ID"/> </xsd:extension> </xsd:simpleContent> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-converterType"> <xsd:annotation> <xsd:documentation> The "converter" element represents a concrete Converter implementation class that should be registered under the specified converter identifier. Converter identifiers must be unique within the entire web application. Nested "attribute" elements identify generic attributes that may be configured on the corresponding UIComponent in order to affect the operation of the Converter. Nested "property" elements identify JavaBeans properties of the Converter implementation class that may be configured to affect the operation of the Converter. "attribute" and "property" elements are intended to allow component developers to more completely describe their components to tools and users. These elements have no required runtime semantics. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:choice> <xsd:element name="converter-id" type="javaee:string"> <xsd:annotation> <xsd:documentation> The "converter-id" element represents the identifier under which the corresponding Converter class should be registered. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="converter-for-class" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "converter-for-class" element represents the fully qualified class name for which a Converter class will be registered. </xsd:documentation> </xsd:annotation> </xsd:element> </xsd:choice> <xsd:element name="converter-class" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "converter-class" element represents the fully qualified class name of a concrete Converter implementation class. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="attribute" type="javaee:faces-config-attributeType" minOccurs="0" maxOccurs="unbounded"> <xsd:annotation> <xsd:documentation> Nested "attribute" elements identify generic attributes that may be configured on the corresponding UIComponent in order to affect the operation of the Converter. This attribute is primarily for design-time tools and is not specified to have any meaning at runtime. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="property" type="javaee:faces-config-propertyType" minOccurs="0" maxOccurs="unbounded"> <xsd:annotation> <xsd:documentation> Nested "property" elements identify JavaBeans properties of the Converter implementation class that may be configured to affect the operation of the Converter. This attribute is primarily for design-time tools and is not specified to have any meaning at runtime. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="converter-extension" type="javaee:faces-config-converter-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name = "faces-config-converter-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for converter. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-lifecycleType"> <xsd:annotation> <xsd:documentation> The "lifecycle" element provides a mechanism to specify modifications to the behaviour of the default Lifecycle implementation for this web application. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:element name="phase-listener" type="javaee:fully-qualified-classType" minOccurs="0" maxOccurs="unbounded"> <xsd:annotation> <xsd:documentation> The "phase-listener" element contains the fully qualified class name of the concrete PhaseListener implementation class that will be registered on the Lifecycle. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="lifecycle-extension" type="javaee:faces-config-lifecycle-extensionType" minOccurs="0" maxOccurs="unbounded"/> <xsd:element name="faces-lifecycle-listener" type="javaee:faces-config-lifecycle-listenerType" minOccurs="0" maxOccurs="unbounded"></xsd:element> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name = "faces-config-lifecycle-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for lifecycle. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:simpleType name="faces-config-localeType"> <xsd:annotation> <xsd:documentation> The localeType defines valid locale defined by ISO-639-1 and ISO-3166. </xsd:documentation> </xsd:annotation> <xsd:restriction base="xsd:string"> <xsd:pattern value="[a-z]{2}(_|-)?([\p{L}\-\p{Nd}]{2})?"/> </xsd:restriction> </xsd:simpleType> <!-- **************************************************** --> <xsd:complexType name="faces-config-locale-configType"> <xsd:annotation> <xsd:documentation> The "locale-config" element allows the app developer to declare the supported locales for this application. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:element name="default-locale" type="javaee:faces-config-default-localeType" minOccurs="0"> </xsd:element> <xsd:element name="supported-locale" type="javaee:faces-config-supported-localeType" minOccurs="0" maxOccurs="unbounded"> </xsd:element> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-managed-beanType"> <xsd:annotation> <xsd:documentation> The "managed-bean" element represents a JavaBean, of a particular class, that will be dynamically instantiated at runtime (by the default VariableResolver implementation) if it is referenced as the first element of a value binding expression, and no corresponding bean can be identified in any scope. In addition to the creation of the managed bean, and the optional storing of it into the specified scope, the nested managed-property elements can be used to initialize the contents of settable JavaBeans properties of the created instance. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="managed-bean-name" type="javaee:java-identifierType"> <xsd:annotation> <xsd:documentation> The "managed-bean-name" element represents the attribute name under which a managed bean will be searched for, as well as stored (unless the "managed-bean-scope" value is "none"). </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="managed-bean-class" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "managed-bean-class" element represents the fully qualified class name of the Java class that will be used`to instantiate a new instance if creation of the specified`managed bean is requested. The specified class must conform to standard JavaBeans conventions. In particular, it must have a public zero-arguments constructor, and zero or more public property setters. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="managed-bean-scope" type="javaee:faces-config-managed-bean-scopeOrNoneType"> <xsd:annotation> <xsd:documentation> The "managed-bean-scope" element represents the scope into which a newly created instance of the specified managed bean will be stored (unless the value is "none"). </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:choice> <xsd:element name="managed-property" type="javaee:faces-config-managed-propertyType" minOccurs="0" maxOccurs="unbounded"/> <xsd:element name="map-entries" type="javaee:faces-config-map-entriesType"/> <xsd:element name="list-entries" type="javaee:faces-config-list-entriesType"/> </xsd:choice> <xsd:element name="managed-bean-extension" type="javaee:faces-config-managed-bean-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name = "faces-config-managed-bean-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for managed-bean. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-managed-bean-scopeOrNoneType"> <xsd:annotation> <xsd:documentation> <![CDATA[ Defines the legal values for the <managed-bean-scope> element's body content, which includes all of the scopes normally used in a web application, plus the "none" value indicating that a created bean should not be stored into any scope. ]]> </xsd:documentation> </xsd:annotation> <xsd:simpleContent> <xsd:restriction base="javaee:string"> <xsd:enumeration value="request"/> <xsd:enumeration value="view"/> <xsd:enumeration value="session"/> <xsd:enumeration value="application"/> <xsd:enumeration value="none"/> </xsd:restriction> </xsd:simpleContent> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-managed-propertyType"> <xsd:annotation> <xsd:documentation> The "managed-property" element represents an individual property of a managed bean that will be configured to the specified value (or value set) if the corresponding managed bean is automatically created. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="property-name" type="javaee:string"> <xsd:annotation> <xsd:documentation> The "property-name" element represents the JavaBeans property name under which the corresponding value may be stored. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="property-class" type="javaee:java-typeType" minOccurs="0"> <xsd:annotation> <xsd:documentation> The "property-class" element represents the Java type of the value associated with this property name. If not specified, it can be inferred from existing classes; however, this element should be specified if the configuration file is going to be the source for generating the corresponding classes. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:choice> <xsd:element name="map-entries" type="javaee:faces-config-map-entriesType"/> <xsd:element name="null-value" type="javaee:faces-config-null-valueType"> </xsd:element> <xsd:element name="value" type="javaee:faces-config-valueType"/> <xsd:element name="list-entries" type="javaee:faces-config-list-entriesType"/> </xsd:choice> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-map-entryType"> <xsd:annotation> <xsd:documentation> The "map-entry" element reprsents a single key-entry pair that will be added to the computed value of a managed property of type java.util.Map. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:element name="key" type="javaee:string"> <xsd:annotation> <xsd:documentation> The "key" element is the String representation of a map key that will be stored in a managed property of type java.util.Map. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:choice> <xsd:element name="null-value" type="javaee:faces-config-null-valueType"/> <xsd:element name="value" type="javaee:faces-config-valueType"/> </xsd:choice> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-map-entriesType"> <xsd:annotation> <xsd:documentation> The "map-entries' element represents a set of key-entry pairs that will be added to the computed value of a managed property of type java.util.Map. In addition, the Java class types of the key and entry values may be optionally declared. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:element name="key-class" type="javaee:fully-qualified-classType" minOccurs="0"> <xsd:annotation> <xsd:documentation> The "key-class" element defines the Java type to which each "key" element in a set of "map-entry" elements will be converted to. If omitted, "java.lang.String" is assumed. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="value-class" type="javaee:faces-config-value-classType" minOccurs="0"/> <xsd:element name="map-entry" type="javaee:faces-config-map-entryType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-navigation-caseType"> <xsd:annotation> <xsd:documentation> The "navigation-case" element describes a particular combination of conditions that must match for this case to be executed, and the view id of the component tree that should be selected next. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="from-action" type="javaee:faces-config-from-actionType" minOccurs="0"> </xsd:element> <xsd:element name="from-outcome" type="javaee:string" minOccurs="0"> <xsd:annotation> <xsd:documentation> The "from-outcome" element contains a logical outcome string returned by the execution of an application action method selected via an "actionRef" property (or a literal value specified by an "action" property) of a UICommand component. If specified, this rule will be relevant only if the outcome value matches this element's value. If not specified, this rule will be relevant no matter what the outcome value was. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="to-view-id" type="javaee:string"> <xsd:annotation> <xsd:documentation> The "to-view-id" element contains the view identifier of the next view that should be displayed if this navigation rule is matched. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="redirect" type="javaee:faces-config-redirectType" minOccurs="0"/> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-navigation-ruleType"> <xsd:annotation> <xsd:documentation> The "navigation-rule" element represents an individual decision rule that will be utilized by the default NavigationHandler implementation to make decisions on what view should be displayed next, based on the view id being processed. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="from-view-id" type="javaee:faces-config-from-view-idType" minOccurs="0"/> <xsd:element name="navigation-case" type="javaee:faces-config-navigation-caseType" minOccurs="0" maxOccurs="unbounded"/> <xsd:element name="navigation-rule-extension" type="javaee:faces-config-navigation-rule-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name = "faces-config-navigation-rule-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for navigation-rule. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-null-valueType"> <xsd:annotation> <xsd:documentation> The "null-value" element indicates that the managed property in which we are nested will be explicitly set to null if our managed bean is automatically created. This is different from omitting the managed property element entirely, which will cause no property setter to be called for this property. The "null-value" element can only be used when the associated "property-class" identifies a Java class, not a Java primitive. </xsd:documentation> </xsd:annotation> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-propertyType"> <xsd:annotation> <xsd:documentation> The "property" element represents a JavaBean property of the Java class represented by our parent element. Property names must be unique within the scope of the Java class that is represented by the parent element, and must correspond to property names that will be recognized when performing introspection against that class via java.beans.Introspector. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="property-name" type="javaee:string"> <xsd:annotation> <xsd:documentation> The "property-name" element represents the JavaBeans property name under which the corresponding value may be stored. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="property-class" type="javaee:java-typeType"> <xsd:annotation> <xsd:documentation> The "property-class" element represents the Java type of the value associated with this property name. If not specified, it can be inferred from existing classes; however, this element should be specified if the configuration file is going to be the source for generating the corresponding classes. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="default-value" type="javaee:faces-config-default-valueType" minOccurs="0"/> <xsd:element name="suggested-value" type="javaee:faces-config-suggested-valueType" minOccurs="0"/> <xsd:element name="property-extension" type="javaee:faces-config-property-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-property-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for property. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-redirectType"> <xsd:annotation> <xsd:documentation> The "redirect" element indicates that navigation to the specified "to-view-id" should be accomplished by performing an HTTP redirect rather than the usual ViewHandler mechanisms. </xsd:documentation> </xsd:annotation> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-referenced-beanType"> <xsd:annotation> <xsd:documentation> The "referenced-bean" element represents at design time the promise that a Java object of the specified type will exist at runtime in some scope, under the specified key. This can be used by design time tools to construct user interface dialogs based on the properties of the specified class. The presence or absence of a referenced bean element has no impact on the JavaServer Faces runtime environment inside a web application. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="referenced-bean-name" type="javaee:java-identifierType"> <xsd:annotation> <xsd:documentation> The "referenced-bean-name" element represents the attribute name under which the corresponding referenced bean may be assumed to be stored, in one of 'request', 'session', or 'application' scopes. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="referenced-bean-class" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "referenced-bean-class" element represents the fully qualified class name of the Java class (either abstract or concrete) or Java interface implemented by the corresponding referenced bean. </xsd:documentation> </xsd:annotation> </xsd:element> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-render-kitType"> <xsd:annotation> <xsd:documentation> The "render-kit" element represents a concrete RenderKit implementation that should be registered under the specified render-kit-id. If no render-kit-id is specified, the identifier of the default RenderKit (RenderKitFactory.DEFAULT_RENDER_KIT) is assumed. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="render-kit-id" type="javaee:string" minOccurs="0"> <xsd:annotation> <xsd:documentation> The "render-kit-id" element represents an identifier for the RenderKit represented by the parent "render-kit" element. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="render-kit-class" type="javaee:fully-qualified-classType" minOccurs="0"> <xsd:annotation> <xsd:documentation> The "render-kit-class" element represents the fully qualified class name of a concrete RenderKit implementation class. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="renderer" type="javaee:faces-config-rendererType" minOccurs="0" maxOccurs="unbounded"/> <xsd:element name="render-kit-extension" type="javaee:faces-config-render-kit-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-rendererType"> <xsd:annotation> <xsd:documentation> The "renderer" element represents a concrete Renderer implementation class that should be registered under the specified component family and renderer type identifiers, in the RenderKit associated with the parent "render-kit" element. Combinations of component family and renderer type must be unique within the RenderKit associated with the parent "render-kit" element. Nested "attribute" elements identify generic component attributes that are recognized by this renderer. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="component-family" type="javaee:string"> <xsd:annotation> <xsd:documentation> The "component-family" element represents the component family for which the Renderer represented by the parent "renderer" element will be used. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="renderer-type" type="javaee:string"> <xsd:annotation> <xsd:documentation> The "renderer-type" element represents a renderer type identifier for the Renderer represented by the parent "renderer" element. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="renderer-class" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "renderer-class" element represents the fully qualified class name of a concrete Renderer implementation class. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="facet" type="javaee:faces-config-facetType" minOccurs="0" maxOccurs="unbounded"/> <xsd:element name="attribute" type="javaee:faces-config-attributeType" minOccurs="0" maxOccurs="unbounded"/> <xsd:element name="renderer-extension" type="javaee:faces-config-renderer-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-renderer-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for renderer. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-render-kit-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for render-kit. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-suggested-valueType"> <xsd:annotation> <xsd:documentation> The "suggested-value" contains the value for the property or attribute in which this element resides. This value is advisory only and is intended for tools to use when populating pallettes. </xsd:documentation> </xsd:annotation> <xsd:simpleContent> <xsd:restriction base="javaee:string"/> </xsd:simpleContent> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-supported-localeType"> <xsd:annotation> <xsd:documentation> The "supported-locale" element allows authors to declare which locales are supported in this application instance. It must be specified as :language:[_:country:[_:variant:]] without the colons, for example "ja_JP_SJIS". The separators between the segments may be '-' or '_'. </xsd:documentation> </xsd:annotation> <xsd:simpleContent> <xsd:extension base="javaee:faces-config-localeType"> <xsd:attribute name="id" type="xsd:ID"/> </xsd:extension> </xsd:simpleContent> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-validatorType"> <xsd:annotation> <xsd:documentation> The "validator" element represents a concrete Validator implementation class that should be registered under the specified validator identifier. Validator identifiers must be unique within the entire web application. Nested "attribute" elements identify generic attributes that may be configured on the corresponding UIComponent in order to affect the operation of the Validator. Nested "property" elements identify JavaBeans properties of the Validator implementation class that may be configured to affect the operation of the Validator. "attribute" and "property" elements are intended to allow component developers to more completely describe their components to tools and users. These elements have no required runtime semantics. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:group ref="javaee:descriptionGroup"/> <xsd:element name="validator-id" type="javaee:string"> <xsd:annotation> <xsd:documentation> The "validator-id" element represents the identifier under which the corresponding Validator class should be registered. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="validator-class" type="javaee:fully-qualified-classType"> <xsd:annotation> <xsd:documentation> The "validator-class" element represents the fully qualified class name of a concrete Validator implementation class. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="attribute" type="javaee:faces-config-attributeType" minOccurs="0" maxOccurs="unbounded"> <xsd:annotation> <xsd:documentation> Nested "attribute" elements identify generic attributes that may be configured on the corresponding UIComponent in order to affect the operation of the Validator. This attribute is primarily for design-time tools and is not specified to have any meaning at runtime. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="property" type="javaee:faces-config-propertyType" minOccurs="0" maxOccurs="unbounded"> <xsd:annotation> <xsd:documentation> Nested "property" elements identify JavaBeans properties of the Validator implementation class that may be configured to affect the operation of the Validator. This attribute is primarily for design-time tools and is not specified to have any meaning at runtime. </xsd:documentation> </xsd:annotation> </xsd:element> <xsd:element name="validator-extension" type="javaee:faces-config-validator-extensionType" minOccurs="0" maxOccurs="unbounded"/> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name = "faces-config-validator-extensionType"> <xsd:annotation> <xsd:documentation> Extension element for validator. It may contain implementation specific content. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded" /> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:simpleType name="faces-config-valueType"> <xsd:annotation> <xsd:documentation> The "value" element is the String representation of a literal value to which a scalar managed property will be set, or a value binding expression ("#{...}") that will be used to calculate the required value. It will be converted as specified for the actual property type. </xsd:documentation> </xsd:annotation> <xsd:union memberTypes="javaee:faces-config-el-expressionType xsd:string"/> </xsd:simpleType> <!-- **************************************************** --> <xsd:complexType name="faces-config-value-classType"> <xsd:annotation> <xsd:documentation> The "value-class" element defines the Java type to which each "value" element's value will be converted to, prior to adding it to the "list-entries" list for a managed property that is a java.util.List, or a "map-entries" map for a managed property that is a java.util.Map. </xsd:documentation> </xsd:annotation> <xsd:simpleContent> <xsd:restriction base="javaee:fully-qualified-classType"/> </xsd:simpleContent> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-list-entriesType"> <xsd:annotation> <xsd:documentation> The "list-entries" element represents a set of initialization elements for a managed property that is a java.util.List or an array. In the former case, the "value-class" element can optionally be used to declare the Java type to which each value should be converted before adding it to the Collection. </xsd:documentation> </xsd:annotation> <xsd:sequence> <xsd:element name="value-class" type="javaee:faces-config-value-classType" minOccurs="0"/> <xsd:choice minOccurs="0" maxOccurs="unbounded"> <xsd:element name="null-value" type="javaee:faces-config-null-valueType"/> <xsd:element name="value" type="javaee:faces-config-valueType"/> </xsd:choice> </xsd:sequence> <xsd:attribute name="id" type="xsd:ID"/> </xsd:complexType> <!-- **************************************************** --> <xsd:complexType name="faces-config-lifecycle-listenerType"> <xsd:sequence> <xsd:element name="faces-lifecycle-listener-class" type="javaee:fully-qualified-classType"/> <xsd:element name="faces-lifecycle-event-class" minOccurs="0" type="javaee:fully-qualified-classType"/> <xsd:element name="source-class" minOccurs="0" type="javaee:fully-qualified-classType"/> </xsd:sequence> </xsd:complexType> <xsd:simpleType name="faces-config-versionType"> <xsd:annotation> <xsd:documentation> This type contains the recognized versions of faces-config supported. </xsd:documentation> </xsd:annotation> <xsd:restriction base="xsd:token"> <xsd:enumeration value="2.0"/> </xsd:restriction> </xsd:simpleType> <!-- **************************************************** --></xsd:schema>