rendered paste body=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHT series
Device Model: FUJITSU MHT2030AT
Serial Number: NN32T4416AJ1
Firmware Version: 849B
User Capacity: 30,005,821,440 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
Local Time is: Sun Feb 24 13:34:47 2008 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 220) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 43606
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 12386304
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 4684
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 8568460083208
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 3499
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
9 Power_On_Seconds 0x0032 055 055 000 Old_age Always - 22585h+11m+54s
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2010
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 391
193 Load_Cycle_Count 0x0032 076 076 000 Old_age Always - 242556
194 Temperature_Celsius 0x0022 100 080 000 Old_age Always - 42 (Lifetime Min/Max 14/64)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 75
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 81891360776
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 3
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000f 100 068 060 Pre-fail Always - 24131
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 1533288120709
SMART Error Log Version: 1
ATA Error Count: 1325 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1325 occurred at disk power-on lifetime: 22399 hours (933 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 21 6e 01 30 e0 Error: UNC at LBA = 0x0030016e = 3146094
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 ff 21 6e 01 30 e0 00 00:38:03.532 READ MULTIPLE
c8 ff 21 6e 01 30 e0 00 00:37:58.535 READ DMA
ef 03 45 ff ff 00 e0 00 00:37:58.511 SET FEATURES [Set transfer mode]
ef 03 0c ff ff 00 e0 00 00:37:58.509 SET FEATURES [Set transfer mode]
c6 ff 10 ff ff 00 e0 00 00:37:58.509 SET MULTIPLE MODE
Error 1324 occurred at disk power-on lifetime: 22399 hours (933 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 16 79 01 30 e0 Error: UNC 22 sectors at LBA = 0x00300179 = 3146105
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 21 6e 01 30 e0 00 00:37:58.535 READ DMA
ef 03 45 ff ff 00 e0 00 00:37:58.511 SET FEATURES [Set transfer mode]
ef 03 0c ff ff 00 e0 00 00:37:58.509 SET FEATURES [Set transfer mode]
c6 ff 10 ff ff 00 e0 00 00:37:58.509 SET MULTIPLE MODE
10 ff 50 3f 6b b1 e0 00 00:37:58.506 RECALIBRATE [OBS-4]
Error 1323 occurred at disk power-on lifetime: 22399 hours (933 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 21 6e 01 30 e0 Error: UNC at LBA = 0x0030016e = 3146094
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 ff 21 6e 01 30 e0 00 00:37:53.483 READ MULTIPLE
c8 ff 21 6e 01 30 e0 00 00:37:48.497 READ DMA
c8 ff 1f 4f 01 30 e0 00 00:37:48.485 READ DMA
ef 03 45 ff ff 00 e0 00 00:37:48.461 SET FEATURES [Set transfer mode]
ef 03 0c ff ff 00 e0 00 00:37:48.459 SET FEATURES [Set transfer mode]
Error 1322 occurred at disk power-on lifetime: 22399 hours (933 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 16 79 01 30 e0 Error: UNC 22 sectors at LBA = 0x00300179 = 3146105
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 21 6e 01 30 e0 00 00:37:48.497 READ DMA
c8 ff 1f 4f 01 30 e0 00 00:37:48.485 READ DMA
ef 03 45 ff ff 00 e0 00 00:37:48.461 SET FEATURES [Set transfer mode]
ef 03 0c ff ff 00 e0 00 00:37:48.459 SET FEATURES [Set transfer mode]
c6 ff 10 ff ff 00 e0 00 00:37:48.459 SET MULTIPLE MODE
Error 1321 occurred at disk power-on lifetime: 22399 hours (933 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 21 6e 01 30 e0 Error: UNC at LBA = 0x0030016e = 3146094
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 ff 21 6e 01 30 e0 00 00:37:43.433 READ MULTIPLE
c8 ff 21 6e 01 30 e0 00 00:37:38.313 READ DMA
ef 03 45 ff ff 00 e0 00 00:37:38.284 SET FEATURES [Set transfer mode]
ef 03 0c ff ff 00 e0 00 00:37:38.283 SET FEATURES [Set transfer mode]
c6 ff 10 ff ff 00 e0 00 00:37:38.282 SET MULTIPLE MODE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.