rendered paste bodyloop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 228k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:04:01.2[C] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:04:01.2: EHCI Host Controller
ehci_hcd 0000:04:01.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:04:01.2: irq 19, io mem 0xfebffc00
ehci_hcd 0000:04:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
Initializing USB Mass Storage driver...
usb 2-2: new high speed USB device using ehci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 9
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
usb usb9: configuration #1 chosen from 1 choice
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:04:01.0: OHCI Host Controller
ohci_hcd 0000:04:01.0: new USB bus registered, assigned bus number 10
ohci_hcd 0000:04:01.0: irq 17, io mem 0xfebfd000
usb usb10: configuration #1 chosen from 1 choice
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:04:01.1[B] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:04:01.1: OHCI Host Controller
ohci_hcd 0000:04:01.1: new USB bus registered, assigned bus number 11
ohci_hcd 0000:04:01.1: irq 18, io mem 0xfebfe000
usb 8-2: new full speed USB device using uhci_hcd and address 2
usb usb11: configuration #1 chosen from 1 choice
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
usb 8-2: configuration #1 chosen from 1 choice
usb 9-1: new low speed USB device using uhci_hcd and address 2
usb 9-1: configuration #1 chosen from 1 choice
usb 9-2: new full speed USB device using uhci_hcd and address 3
usb 9-2: configuration #1 chosen from 1 choice
hub 9-2:1.0: USB hub found
hub 9-2:1.0: 4 ports detected
usb 9-2.4: new low speed USB device using uhci_hcd and address 4
usb 9-2.4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input0
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1
input: Ideazon Zboard as /class/input/input1
input: USB HID v1.10 Keyboard [Ideazon Zboard] on usb-0000:00:1d.2-2.4
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
libata version 2.00 loaded.
ahci 0000:00:1f.2: version 2.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC2000003E900 ctl 0x0 bmdma 0x0 irq 22
ata2: SATA max UDMA/133 cmd 0xFFFFC2000003E980 ctl 0x0 bmdma 0x0 irq 22
ata3: SATA max UDMA/133 cmd 0xFFFFC2000003EA00 ctl 0x0 bmdma 0x0 irq 22
ata4: SATA max UDMA/133 cmd 0xFFFFC2000003EA80 ctl 0x0 bmdma 0x0 irq 22
ata5: SATA max UDMA/133 cmd 0xFFFFC2000003EB00 ctl 0x0 bmdma 0x0 irq 22
ata6: SATA max UDMA/133 cmd 0xFFFFC2000003EB80 ctl 0x0 bmdma 0x0 irq 22
scsi1 : ahci
ata1: SATA link down (SStatus 0 SControl 300)
scsi2 : ahci
ata2: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
scsi 0:0:0:0: Direct-Access Canon MP500Storage 0109 PQ: 0 ANSI: 2
sd 0:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
ata3: SATA link down (SStatus 0 SControl 300)
scsi4 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi5 : ahci
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 31/32)
ata5.00: ata5: dev 0 multi count 16
ata5.00: configured for UDMA/133
scsi6 : ahci
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI, max UDMA/100
ata6.00: configured for UDMA/100
scsi 5:0:0:0: Direct-Access ATA WDC WD2500JS-00N 10.0 PQ: 0 ANSI: 5
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 < >
sd 5:0:0:0: Attached scsi disk sdb
scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62L DL00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
JFS: nTxBlock = 8192, nTxLock = 65536
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
Copyright (c) 1999-2006 Intel Corporation.
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset iso8859-1
Unable to load NLS charset iso8859-1
ISO 9660 Extensions: RRIP_1991A
Real Time Clock Driver v1.12ac
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: RTL8169sc/8110sc at 0xffffc20000050800, 00:1b:fc:ee:57:d3, IRQ 16
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v1.10 addr 0xfbffc000 irq 17 Yukon-EC Ultra (0xb4) rev 3
sky2 eth1: addr 00:1b:fc:ee:5e:4a
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: RTL8169sc/8110sc at 0xffffc20000050800, 00:1b:fc:ee:57:d3, IRQ 16
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v1.10 addr 0xfbffc000 irq 17 Yukon-EC Ultra (0xb4) rev 3
sky2 eth1: addr 00:1b:fc:ee:5e:4a
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
sr 6:0:0:0: Attached scsi generic sg2 type 5
sky2 eth1: enabling interface
r8169: eth0: link up
sky2 eth1: disabling interface
sky2 eth1: enabling interface
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
r8169: eth0: link up
eth0: no IPv6 routers present