the compiler should be arm-angstrom-linux-g++ but is arm-linux-g++
sh-3.1$ bitbake opie-image
NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance.
NOTE: Handling BitBake files: / (4969/4969) [100 %]
NOTE: Parsing finished. 4737 cached, 0 parsed, 232 skipped, 0 masked.
NOTE: build 200802221426: started
OE Build Configuration:
BB_VERSION = "1.8.9"
OE_REVISION = "98d8c9d10e039fd0a9770088da67f9d4b791f310"
TARGET_ARCH = "arm"
TARGET_OS = "linux"
MACHINE = "simpad"
DISTRO = "angstrom"
DISTRO_VERSION = "2007.12-r5"
TARGET_FPU = "soft"
NOTE: Resolving missing task queue dependencies
NOTE: preferred version 2.5 of glibc not available (for item virtual/arm-angstrom-linux-libc-for-gcc)
NOTE: Preparing runqueue
NOTE: Executing runqueue
NOTE: Running task 1416 of 2311 (ID: 1935, /home/nice/SlackPAD/oe/org.openembedded.angstrom-2007.12-stable/packages/qte/qte-mt_2.3.10.bb, do_compile)
NOTE: package qte-mt-2.3.10: started
NOTE: package qte-mt-2.3.10-r25: task do_compile: started
ERROR: function do_compile failed
ERROR: log data follows (/home/nice/SlackPAD/oe/tmp/work/arm-oabi-angstrom-linux/qte-mt-2.3.10-r25/temp/log.do_compile.11864)
| NOTE: make -j 4 -e symlinks
| NOTE: make -j 4 -e src-mt sub-src
| make -f src-mt.mk
| make[1]: Entering directory `/home/nice/SlackPAD/oe/tmp/work/arm-oabi-angstrom-linux/qte-mt-2.3.10-r25/qt-2.3.10'
| cd src; make 'QT_THREAD_SUFFIX=-mt' 'QT_LFLAGS_MT=$(SYSCONF_LFLAGS_THREAD) $(SYSCONF_LIBS_THREAD)' 'QT_CXX_MT=$(SYSCONF_CXXFLAGS_THREAD) -DQT_THREAD_SUPPORT' 'QT_C_MT=$(SYSCONF_CFLAGS_THREAD) -DQT_THREAD_SUPPORT'
| make[2]: Entering directory `/home/nice/SlackPAD/oe/tmp/work/arm-oabi-angstrom-linux/qte-mt-2.3.10-r25/qt-2.3.10/src'
| arm-linux-g++ -D_REENTRANT -DQT_THREAD_SUPPORT -c -I/home/nice/SlackPAD/oe/tmp/work/arm-oabi-angstrom-linux/qte-mt-2.3.10-r25/qt-2.3.10/include -pipe -DQWS -fno-exceptions -fno-rtti -O2 -Wall -W -DNO_DEBUG -fPIC -DQT_NO_IMAGEIO_MNG -DQT_NO_VNC -DQT_NO_QWS_SNAP -DQT_NO_QWS_VOODOO3 -DQT_NO_QWS_MACH64 -DQT_NO_QWS_MATROX -DQT_NO_QWS_VNC -DQT_NO_QWS_VGA_16 -DQT_NO_QWS_DEPTH_4 -DQT_NO_QWS_DEPTH_24 -DQT_NO_QWS_VFB -DQT_BUILTIN_GIF_READER=1 -DQT_NO_IMAGEIO_MNG -DQT_NO_SM_SUPPORT -DQT_NO_XKB -I3rdparty/kernel -I3rdparty/tools -o allmoc.o allmoc.cpp
| make[2]: arm-linux-g++: Command not found
| make[2]: *** [allmoc.o] Error 127
| make[2]: Leaving directory `/home/nice/SlackPAD/oe/tmp/work/arm-oabi-angstrom-linux/qte-mt-2.3.10-r25/qt-2.3.10/src'
| make[1]: *** [src-mt] Error 2
| make[1]: Leaving directory `/home/nice/SlackPAD/oe/tmp/work/arm-oabi-angstrom-linux/qte-mt-2.3.10-r25/qt-2.3.10'
| make: *** [src-mt] Error 2
| FATAL: oe_runmake failed
NOTE: Task failed: /home/nice/SlackPAD/oe/tmp/work/arm-oabi-angstrom-linux/qte-mt-2.3.10-r25/temp/log.do_compile.11864
NOTE: package qte-mt-2.3.10-r25: task do_compile: failed
ERROR: TaskFailed event exception, aborting
NOTE: package qte-mt-2.3.10: failed
ERROR: Build of /home/nice/SlackPAD/oe/org.openembedded.angstrom-2007.12-stable/packages/qte/qte-mt_2.3.10.bb do_compile failed
ERROR: Task 1935 (/home/nice/SlackPAD/oe/org.openembedded.angstrom-2007.12-stable/packages/qte/qte-mt_2.3.10.bb, do_compile) failed
NOTE: Tasks Summary: Attempted 1415 tasks of which 1415 didn't need to be rerun and 1 failed.
ERROR: '/home/nice/SlackPAD/oe/org.openembedded.angstrom-2007.12-stable/packages/qte/qte-mt_2.3.10.bb' failed
----------------------------------------------------------------
sh-3.1$ cat sources.txt
/home/nice/SlackPAD/oe/
BBPATH=/home/nice/SlackPAD/oe/:/home/nice/SlackPAD/oe/build/:/home/nice/SlackPAD/oe/org.openembedded.angstrom-2007.12-stable/
PKGDIR=/home/nice/SlackPAD/oe/build/
DL_DIR=/home/nice/SlackPAD/oe/downloads
echo Setting up dev env for Ångström
if [ -z ${ORG_PATH} ]
then
ORG_PATH=${PATH}
export ORG_PATH
fi
if [ -z ${ORG_LD_LIBRARY_PATH} ]
then
ORG_LD_LIBRARY_PATH=${LD_LIBRARY_PATH}
export ORG_LD_LIBRARY_PATH
fi
PATH=/home/nice/SlackPAD/oe/bitbake-1.8.8/bin:${ORG_PATH}
cd $PKGDIR
LD_LIBRARY_PATH=
export PATH LD_LIBRARY_PATH BBPATH
export LANG=C
echo "Altered environment for OE Development"
----------------------------------------------------------------
sh-3.1$ cat build/conf/local.conf
#
# OpenEmbedded local configuration file (sample)
#
# Please visit the Wiki at http://openembedded.org/ for more info.
#
#
# Be SURE to read this file in its entirety and the GettingStarted page on the
# wiki before proceeding.
#
# Once you have done that, remove the line at the end of this
# file and build away.
#
# WARNING: lines starting with a space (' ') will result in parse failures.
# Remove '# ' from commented lines to activate them.
#
# NOTE: Do NOT use $HOME in your paths, BitBake does NOT expand ~ for you. If you
# must have paths relative to your homedir use ${HOME} (note the {}'s there
# you MUST have them for the variable expansion to be done by BitBake). Your
# paths should all be absolute paths (They should all start with a / after
# expansion. Stuff like starting with ${HOME} or ${TOPDIR} is ok).
# Use this to specify where BitBake should place the downloaded sources into
DL_DIR = "${HOME}/SlackPAD/oe/sources"
# Delete the line below. Then specify which .bb files to consider for
# your build. Typically this will be something like BBFILES = "/path/to/openembedded/packages/*/*.bb"
BBFILES := "${HOME}/SlackPAD/oe/org.openembedded.angstrom-2007.12-stable/packages/*/*.bb"
# Use the BBMASK below to instruct BitBake to _NOT_ consider some .bb files
# This is a regulary expression, so be sure to get your parenthesis balanced.
BBMASK = ""
# Uncomment this if you want to use a prebuilt toolchain. You will need to
# provide packages for toolchain and additional libraries yourself. You also
# have to set PATH in your environment to make sure BitBake finds additional binaries.
# Note: You will definitely need to say:
# ASSUME_PROVIDED += "virtual/arm-linux-gcc-2.95"
# to build any of two Linux 2.4 Embedix kernels,
# i.e. openzaurus-sa-2.4.18 and openzaurus-pxa-2.4.18 - and don't forget
# to rename the binaries as instructed in the Wiki.
# ASSUME_PROVIDED += "virtual/${TARGET_PREFIX}gcc virtual/libc"
# Select between multiple alternative providers, if more than one is eligible.
PREFERRED_PROVIDERS = "virtual/qte:qte virtual/libqpe:libqpe-opie"
PREFERRED_PROVIDERS += " virtual/libsdl:libsdl-x11"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
# Uncomment this to specify where BitBake should create its temporary files.
# Note that a full build of everything in OpenEmbedded will take GigaBytes of hard
# disk space, so make sure to free enough space. The default TMPDIR is
# <build directory>/tmp
# Don't use symlinks in in the path to avoid problems
TMPDIR = "${HOME}/SlackPAD/oe/tmp"
# Uncomment this to specify a machine to build for. See the conf directory
# for machines currently known to OpenEmbedded. This will automatically take care
# of TARGET_ARCH
MACHINE = "simpad"
# Use this to specify the target architecture. Note that this is only
# needed when building for a machine not known to OpenEmbedded. Better use
# the MACHINE attribute (see above)
# TARGET_ARCH = "arm"
# Use this to specify the target operating system. The default is "linux",
# for a normal linux system with glibc. Set this to "linux-uclibc" if you want
# to build a uclibc based system.
# Normally the DISTRO of your choosing will take care of this
# TARGET_OS = "linux"
# TARGET_OS = "linux-uclibc"
# Uncomment this to select a distribution policy. See the conf directory
# for distributions currently known to OpenEmbedded.
# Although it no longer contain version number in the (file-)name
# openzaurus-unstable is a so called "versioned" distro, i.e. they
# explicitely select specific versions of various packages.
# Stay away from unversioned distros unless you really know what you are doing
DISTRO = "angstrom-2007.1"
# So far, angstrom.conf sets ENABLE_BINARY_LOCALE_GENERATION
# to generate binary locale packages at build time using qemu-native and
# thereby guarantee i18n support on all devices. If your build breaks on
# qemu-native consider disabling ENABLE_BINARY_LOCALE_GENERATION (note that
# this breaks i18n on devices with less than 128MB RAM) or installing
# a working third-party qemu (e.g. provided by your distribution) and
# adding qemu-native to ASSUME_PROVIDED. Caveat emptor, since third-party
# qemus lack patches needed to work with various OE targets.
ENABLE_BINARY_LOCALE_GENERATION = "0"
#ASSUME_PROVIDED += "qemu-native"
# If ENABLE_BINARY_LOCALE_GENERATION is set to "1", you can limit locales
# generated to the list provided by GLIBC_GENERATE_LOCALES. This is huge
# time-savior for developmental builds. Format: list of locale.encoding pairs
# with spaces as separators.
# GLIBC_GENERATE_LOCALES = "en_GB.UTF-8 de_DE.UTF-8"
# Uncomment this to select a particular major kernel version if the MACHINE setting
# supports more than one major kernel version. Currently this is suported by the
# following MACHINE types: poodle, tosa and simpad.
# MACHINE_KERNEL_VERSION = "2.6"
# Uncomment one of these to build packages during the build process.
# This is done automatically if you set DISTRO (see above)
# INHERIT = "package_ipk"
# INHERIT = "package_tar"
# Add the required image file system types below. Valid are
# jffs2, tar(.gz|bz2), cpio(.gz), cramfs, ext2(.gz), ext3(.gz)
# squashfs, squashfs-lzma
IMAGE_FSTYPES = "jffs2 tar"
# Uncomment this to disable the parse cache (not recommended).
# CACHE = ""
# Uncomment this if you want BitBake to emit debugging output
# BBDEBUG = "yes"
# Uncomment these two if you want BitBake to build images useful for debugging.
# Note that INHIBIT_PACKAGE_STRIP needs a package format to be defined.
# Also note that OE now produces -dbg packages which contain debugging symbols.
# DEBUG_BUILD = "1"
# INHIBIT_PACKAGE_STRIP = "1"
# Uncomment these to build a package such that you can use gprof to profile it.
# NOTE: This will only work with 'linux' targets, not
# 'linux-uclibc', as uClibc doesn't provide the necessary
# object files. Also, don't build glibc itself with these
# flags, or it'll fail to build.
#
# PROFILE_OPTIMIZATION = "-pg"
# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
# LDFLAGS =+ "-pg"
# Uncomment this to enable parallel make.
# This allows make to spawn mutliple processes to take advantage of multiple
# processors. Useful on SMP machines. This may break some packages - we're
# in the process of marking these so let us know if you find any.
PARALLEL_MAKE = "-j 4"
# Uncomment this if you want BitBake to emit the log if a build fails.
BBINCLUDELOGS = "yes"
# Specifies a location to search for pre-generated tarballs when fetching
# a cvs:// URI. Outcomment this, if you always want to pull directly from CVS.
#CVS_TARBALL_STASH = ""
ANGSTROM_MODE = "glibc"
# EDIT THIS FILE and then remove the line below before using!
----------------------------------------------------