Someone

root  (hd0,0)
 Filesystem type is ext2fs, partition type 0x83
kernel  /boot/vmlinuz-2.6.18-6-k7 root=/dev/sda1 ro console=tty0 console=ttyS0,
9600 acpi=off 
   [Linux-bzImage, setup=0x1e00, size=0x13387d]
initrd  /boot/initrd.img-2.6.18-6-k7
   [Linux-initrd @ 0x1fba7000, 0x448d2f bytes]
savedefault

Linux version 2.6.18-6-k7 (Debian 2.6.18.dfsg.1-18etch1) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sun Feb 10 22:16:15 UTC 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
 BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
 BIOS-e820: 000000007ff70000 - 000000007ff7b000 (ACPI data)
 BIOS-e820: 000000007ff7b000 - 000000007ff80000 (ACPI NVS)
 BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f77b0
DMI present.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: AMD      Product ID: HAMMER       APIC at: 0xFEE00000
Processor #0 15:5 APIC version 16
Processor #1 15:5 APIC version 16
I/O APIC #2 Version 17 at 0xFEC00000.
I/O APIC #3 Version 17 at 0xFC000000.
I/O APIC #4 Version 17 at 0xFC001000.
Enabling APIC mode:  Flat.  Using 3 I/O APICs
Processors: 2
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Detected 2392.743 MHz processor.
Built 1 zonelists.  Total pages: 524144
Kernel command line: root=/dev/sda1 ro console=tty0 console=ttyS0,9600 acpi=off 
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2070936k/2096576k available (1555k kernel code, 24316k reserved, 579k data, 196k init, 1179072k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4789.85 BogoMIPS (lpj=9579705)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
CPU0: AMD Opteron(tm) Processor 250 stepping 0a
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4785.44 BogoMIPS (lpj=9570891)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Opteron(tm) Processor 250 stepping 0a
Total of 2 processors activated (9575.29 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=598
checking if image is initramfs... it is
Freeing initrd memory: 4387k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd8f2, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f77c0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb133, dseg 0x400
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
PCI: Probing PCI hardware
CPU 0: Machine Check Exception: 0000000000000007
Bank 3: b40000000000083b at 000000fdfc000cfc
Kernel panic - not syncing: Unable to continue
 BUG: warning at arch/i386/kernel/smp.c:547/smp_call_function()
 [<c010f5cd>] smp_call_function+0x53/0xfd
 [<c011da81>] printk+0x14/0x18
 [<c010f68a>] smp_send_stop+0x13/0x1c
 [<c011d0f4>] panic+0x4c/0xe0
 [<c010a3fa>] k7_machine_check+0x10f/0x131
 [<c010a2eb>] k7_machine_check+0x0/0x131
 [<c01037d5>] error_code+0x39/0x40
 [<c0221049>] pci_conf1_read+0x97/0xb2
 [<c0222008>] pci_read+0x1c/0x21
 [<c01bfe81>] pci_bus_read_config_dword+0x40/0x63
 [<c01c0c02>] pci_scan_single_device+0x19/0x307
 [<c018fb98>] sysfs_create_link+0xed/0xf9
 [<c01c0f05>] pci_scan_slot+0x15/0x44
 [<c01c13a8>] pci_scan_child_bus+0x18/0x6f
 [<c01c1417>] pci_scan_bus_parented+0x18/0x1f
 [<c02220c6>] pcibios_scan_root+0x41/0x4a
 [<c033454f>] pci_legacy_init+0x42/0xdf
 [<c01003e1>] init+0x111/0x28e
 [<c0102b46>] ret_from_fork+0x6/0x1c
 [<c01002d0>] init+0x0/0x28e
 [<c01002d0>] init+0x0/0x28e
 [<c0101005>] kernel_thread_helper+0x5/0xb