rendered paste bodydmesg
[ 0.000000] Linux version 2.6.22-14-386 (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 Tue Feb 12 07:12:19 UTC 2008 (Ubuntu 2.6.22-14.52-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F75E0 checksum 0
[ 0.000000] ACPI: RSDP 000F75E0, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3FFF30C0, 4561 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FFF0000, 0040
[ 0.000000] ACPI: APIC 3FFF7640, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Built 1 zonelists. Total pages: 260081
[ 0.000000] Kernel command line: root=UUID=de36a319-c0c1-4b2a-92e0-d8b9954fa0af ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2205.027 MHz processor.
[ 34.710732] Console: colour VGA+ 80x25
[ 34.711256] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 34.711682] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 34.734172] Memory: 1028144k/1048512k available (1929k kernel code, 19600k reserved, 876k data, 348k init, 131008k highmem)
[ 34.734182] virtual kernel memory layout:
[ 34.734183] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB)
[ 34.734184] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 34.734185] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 34.734186] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 34.734187] .init : 0xc03c0000 - 0xc0417000 ( 348 kB)
[ 34.734188] .data : 0xc02e2655 - 0xc03bda04 ( 876 kB)
[ 34.734190] .text : 0xc0100000 - 0xc02e2655 (1929 kB)
[ 34.734193] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 34.734243] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 34.814199] Calibrating delay using timer specific routine.. 4413.28 BogoMIPS (lpj=8826562)
[ 34.814229] Security Framework v1.0.0 initialized
[ 34.814237] SELinux: Disabled at boot.
[ 34.814243] Mount-cache hash table entries: 512
[ 34.814356] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 34.814364] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 34.814367] CPU: L2 Cache: 512K (64 bytes/line)
[ 34.814369] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 34.814379] Compat vDSO mapped to ffffe000.
[ 34.814388] CPU: AMD Athlon(tm) XP 3200+ stepping 00
[ 34.814394] Checking 'hlt' instruction... OK.
[ 34.830750] Early unpacking initramfs... done
[ 35.102927] ACPI: Core revision 20070126
[ 35.102998] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 35.105787] ENABLING IO-APIC IRQs
[ 35.105977] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 35.249932] Booting paravirtualized kernel on bare hardware
[ 35.249990] Time: 15:15:18 Date: 01/19/108
[ 35.250014] NET: Registered protocol family 16
[ 35.250095] EISA bus registered
[ 35.250107] ACPI: bus type pci registered
[ 35.281841] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
[ 35.281845] PCI: Using configuration type 1
[ 35.281846] Setting up standard PCI resources
[ 35.287420] ACPI: EC: Look up EC in DSDT
[ 35.292419] ACPI: Interpreter enabled
[ 35.292421] ACPI: (supports S0 S1 S4 S5)
[ 35.292434] ACPI: Using IOAPIC for interrupt routing
[ 35.301009] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 35.301018] PCI: Probing PCI hardware (bus 00)
[ 35.301073] PCI: nForce2 C1 Halt Disconnect fixup
[ 35.301816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 35.301998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 35.302254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 35.357791] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 35.357946] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 35.358096] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 35.358246] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 35.358395] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 35.358545] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 35.358699] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 35.358848] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 35.358998] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 35.359147] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 35.359296] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 35.359446] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 35.359596] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 35.359749] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 35.359898] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 35.360047] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 35.360175] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 35.360302] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[ 35.360429] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[ 35.360554] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[ 35.360674] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 35.360863] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 35.361052] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 35.361238] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 35.361425] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
[ 35.361612] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 35.361800] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 35.361936] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[ 35.362122] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 35.362309] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0
[ 35.362496] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 35.362683] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 35.362777] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 35.362791] pnp: PnP ACPI init
[ 35.362797] ACPI: bus type pnp registered
[ 35.367802] pnp: PnP ACPI: found 15 devices
[ 35.367804] ACPI: ACPI bus type pnp unregistered
[ 35.367808] PnPBIOS: Disabled by ACPI PNP
[ 35.367851] PCI: Using ACPI for IRQ routing
[ 35.367855] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 35.416233] NET: Registered protocol family 8
[ 35.416235] NET: Registered protocol family 20
[ 35.416287] pnp: 00:00: ioport range 0x4000-0x407f has been reserved
[ 35.416290] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[ 35.416293] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[ 35.416295] pnp: 00:00: ioport range 0x4480-0x44ff has been reserved
[ 35.416297] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[ 35.416300] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[ 35.416304] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[ 35.416306] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[ 35.416310] pnp: 00:02: iomem range 0xd8800-0xdbfff has been reserved
[ 35.416313] pnp: 00:02: iomem range 0xf0000-0xf7fff could not be reserved
[ 35.416315] pnp: 00:02: iomem range 0xf8000-0xfbfff could not be reserved
[ 35.416318] pnp: 00:02: iomem range 0xfc000-0xfffff could not be reserved
[ 35.417735] Time: tsc clocksource has been installed.
[ 35.446539] PCI: Bridge: 0000:00:08.0
[ 35.446542] IO window: a000-bfff
[ 35.446547] MEM window: e4000000-e5ffffff
[ 35.446550] PREFETCH window: 50000000-500fffff
[ 35.446555] PCI: Bridge: 0000:00:1e.0
[ 35.446556] IO window: disabled.
[ 35.446560] MEM window: e1000000-e3ffffff
[ 35.446563] PREFETCH window: d8000000-dfffffff
[ 35.446573] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 35.446586] NET: Registered protocol family 2
[ 35.485698] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 35.485852] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 35.487049] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 35.487384] TCP: Hash tables configured (established 131072 bind 65536)
[ 35.487386] TCP reno registered
[ 35.497793] checking if image is initramfs... it is
[ 35.949329] Switched to high resolution mode on CPU 0
[ 36.018052] Freeing initrd memory: 7047k freed
[ 36.018403] audit: initializing netlink socket (disabled)
[ 36.018417] audit(1203434118.176:1): initialized
[ 36.018468] highmem bounce pool size: 64 pages
[ 36.019978] VFS: Disk quotas dquot_6.5.1
[ 36.019990] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 36.020071] io scheduler noop registered
[ 36.020073] io scheduler anticipatory registered
[ 36.020075] io scheduler deadline registered
[ 36.020088] io scheduler cfq registered (default)
[ 36.073128] Boot video device is 0000:03:00.0
[ 36.073256] isapnp: Scanning for PnP cards...
[ 36.427365] isapnp: No Plug & Play device found
[ 36.447021] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 36.447125] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 36.447277] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 36.447774] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 36.447989] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 36.448549] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 36.448663] input: Macintosh mouse button emulation as /class/input/input0
[ 36.448748] PNP: No PS/2 controller found. Probing ports directly.
[ 36.451172] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 36.451176] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 36.451311] mice: PS/2 mouse device common for all mice
[ 36.451391] EISA: Probing bus 0 at eisa.0
[ 36.451412] Cannot allocate resource for EISA slot 4
[ 36.451414] Cannot allocate resource for EISA slot 5
[ 36.451428] EISA: Detected 0 cards.
[ 36.451516] TCP cubic registered
[ 36.451523] NET: Registered protocol family 1
[ 36.451538] Using IPI Shortcut mode
[ 36.451703] Magic number: 12:711:285
[ 36.451871] hash matches device PNP0C04:00
[ 36.452230] Freeing unused kernel memory: 348k freed
[ 37.625912] AppArmor: AppArmor initialized<5>audit(1203434119.784:2): type=1505 info="AppArmor initialized" pid=1222
[ 37.633108] fuse init (API version 7.8)
[ 37.637882] Failure registering capabilities with primary security module.
[ 38.132429] usbcore: registered new interface driver usbfs
[ 38.132456] usbcore: registered new interface driver hub
[ 38.132473] usbcore: registered new device driver usb
[ 38.133017] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 38.133386] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 38.133394] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
[ 38.133409] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 38.133413] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 38.133583] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 38.133600] ohci_hcd 0000:00:02.0: irq 16, io mem 0xe6087000
[ 38.154503] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 38.179960] SCSI subsystem initialized
[ 38.184197] libata version 2.21 loaded.
[ 38.209320] usb usb1: configuration #1 chosen from 1 choice
[ 38.209346] hub 1-0:1.0: USB hub found
[ 38.209358] hub 1-0:1.0: 3 ports detected
[ 38.311560] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 38.311571] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
[ 38.311586] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 38.311589] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 38.311612] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 38.311631] ohci_hcd 0000:00:02.1: irq 17, io mem 0xe6082000
[ 38.365209] Floppy drive(s): fd0 is 1.44M
[ 38.369137] usb usb2: configuration #1 chosen from 1 choice
[ 38.369168] hub 2-0:1.0: USB hub found
[ 38.369179] hub 2-0:1.0: 3 ports detected
[ 38.384720] FDC 0 is a post-1991 82077
[ 38.471458] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 38.471468] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
[ 38.471481] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 38.471484] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 38.471507] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 38.471540] ehci_hcd 0000:00:02.2: debug port 1
[ 38.471545] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 38.471554] ehci_hcd 0000:00:02.2: irq 18, io mem 0xe6083000
[ 38.614817] usb 1-3: new full speed USB device using ohci_hcd and address 2
[ 38.614838] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 38.614929] usb usb3: configuration #1 chosen from 1 choice
[ 38.614953] hub 3-0:1.0: USB hub found
[ 38.614961] hub 3-0:1.0: 6 ports detected
[ 38.719215] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 38.719221] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
[ 38.719227] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 39.238630] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
[ 39.243310] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 39.243316] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 39.244436] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[ 39.244458] NFORCE2: chipset revision 162
[ 39.244460] NFORCE2: not 100% native mode: will probe irqs later
[ 39.244468] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 39.244477] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 39.244488] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 39.244496] Probing IDE interface ide0...
[ 39.977714] hda: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
[ 40.281306] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 40.499935] usb 2-1: configuration #1 chosen from 1 choice
[ 40.760991] hdb: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
[ 40.804833] usb 2-2: new low speed USB device using ohci_hcd and address 3
[ 40.817162] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 40.817669] Probing IDE interface ide1...
[ 41.007402] usb 2-2: configuration #1 chosen from 1 choice
[ 41.312374] usb 2-3: new low speed USB device using ohci_hcd and address 4
[ 41.384746] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
[ 41.384751] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 21 (level, high) -> IRQ 17
[ 41.384757] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 41.437323] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[e6084000-e60847ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 41.449115] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 41.449125] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 19
[ 41.449167] skge 1.11 addr 0xe5000000 irq 19 chip Yukon-Lite rev 7
[ 41.449448] skge eth1: addr 00:11:2f:a6:e9:4e
[ 41.449540] sata_sil 0000:01:0b.0: version 2.2
[ 41.449724] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 41.449728] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 20
[ 41.450096] scsi0 : sata_sil
[ 41.450262] scsi1 : sata_sil
[ 41.450374] ata1: SATA max UDMA/100 cmd 0xf8854080 ctl 0xf885408a bmdma 0xf8854000 irq 20
[ 41.450395] ata2: SATA max UDMA/100 cmd 0xf88540c0 ctl 0xf88540ca bmdma 0xf8854008 irq 20
[ 41.456836] hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 41.456844] Uniform CD-ROM driver Revision: 3.20
[ 41.458206] hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[ 41.496219] usb 2-3: device descriptor read/64, error -62
[ 41.779950] usb 2-3: device descriptor read/64, error -62
[ 41.915849] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 41.924326] ata1.00: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7
[ 41.924329] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 41.940306] ata1.00: configured for UDMA/100
[ 42.059697] usb 2-3: new low speed USB device using ohci_hcd and address 5
[ 42.239533] usb 2-3: device descriptor read/64, error -62
[ 42.407403] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 42.416714] ata2.00: ATA-7: Maxtor 6B200M0, BANC1B70, max UDMA/133
[ 42.416717] ata2.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 42.432713] ata2.00: configured for UDMA/100
[ 42.432808] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5
[ 42.433141] scsi 1:0:0:0: Direct-Access ATA Maxtor 6B200M0 BANC PQ: 0 ANSI: 5
[ 42.548447] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[ 42.552854] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
[ 42.552873] sd 0:0:0:0: [sda] Write Protect is off
[ 42.552876] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 42.552888] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 42.552940] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
[ 42.552947] sd 0:0:0:0: [sda] Write Protect is off
[ 42.552949] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 42.552960] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 42.552964] sda: sda1
[ 42.554509] sd 0:0:0:0: [sda] Attached SCSI disk
[ 42.554642] sd 1:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
[ 42.554650] sd 1:0:0:0: [sdb] Write Protect is off
[ 42.554652] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 42.554664] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 42.554688] sd 1:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
[ 42.554695] sd 1:0:0:0: [sdb] Write Protect is off
[ 42.554698] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 42.554709] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 42.554711] sdb: sdb1 sdb2 sdb3 sdb4
[ 42.590924] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 42.594378] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 42.594401] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 42.603235] usb 2-3: device descriptor read/64, error -62
[ 42.819105] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000a576a1]
[ 42.855439] Attempting manual resume
[ 42.855443] swsusp: Resume From Partition 8:19
[ 42.855444] PM: Checking swsusp image.
[ 42.873211] PM: Resume from disk failed.
[ 42.883001] usb 2-3: new low speed USB device using ohci_hcd and address 6
[ 42.901903] kjournald starting. Commit interval 5 seconds
[ 42.901913] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.290588] usb 2-3: device not accepting address 6, error -62
[ 43.466430] usb 2-3: new low speed USB device using ohci_hcd and address 7
[ 43.874059] usb 2-3: device not accepting address 7, error -62
[ 43.874111] usbcore: registered new interface driver hiddev
[ 44.177784] usb 1-3: new full speed USB device using ohci_hcd and address 3
[ 44.394093] usb 1-3: configuration #1 chosen from 1 choice
[ 44.404019] input: Logitech Logitech USB Keyboard as /class/input/input1
[ 44.404030] input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.1-1
[ 44.418842] input: Logitech Logitech USB Keyboard as /class/input/input2
[ 44.418847] input: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:02.1-1
[ 44.424925] input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input3
[ 44.424939] input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:02.1-2
[ 44.424948] usbcore: registered new interface driver usbhid
[ 44.424951] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 49.586970] Linux agpgart interface v0.102 (c) Dave Jones
[ 49.591556] agpgart: Detected NVIDIA nForce2 chipset
[ 49.598454] agpgart: AGP aperture is 128M @ 0xd0000000
[ 50.007540] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 50.008949] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 50.618816] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 50.618843] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500
[ 50.632173] Real Time Clock Driver v1.12ac
[ 50.937457] input: PC Speaker as /class/input/input4
[ 51.100941] parport_pc 00:0c: reported by Plug and Play ACPI
[ 51.100999] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 51.104542] usbcore: registered new interface driver libusual
[ 51.126697] Initializing USB Mass Storage driver...
[ 51.163021] scsi2 : SCSI emulation for USB Mass Storage devices
[ 51.163451] usb-storage: device found at 3
[ 51.163454] usb-storage: waiting for device to settle before scanning
[ 51.163482] usbcore: registered new interface driver usb-storage
[ 51.163485] USB Mass Storage support registered.
[ 51.171642] usbcore: registered new interface driver xpad
[ 51.171647] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 51.350867] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[ 51.350873] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 18
[ 51.350895] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 51.671003] intel8x0_measure_ac97_clock: measured 52850 usecs
[ 51.671007] intel8x0: clocking to 47417
[ 53.147489] lp0: using parport0 (interrupt-driven).
[ 53.205882] Adding 1052248k swap on /dev/sdb3. Priority:-1 extents:1 across:1052248k
[ 53.523317] EXT3 FS on sdb1, internal journal
[ 54.323910] kjournald starting. Commit interval 5 seconds
[ 54.324005] EXT3 FS on sdb2, internal journal
[ 54.324010] EXT3-fs: mounted filesystem with ordered data mode.
[ 54.379279] kjournald starting. Commit interval 5 seconds
[ 54.379435] EXT3 FS on sdb4, internal journal
[ 54.379437] EXT3-fs: mounted filesystem with ordered data mode.
[ 54.384470] kjournald starting. Commit interval 5 seconds
[ 54.388671] EXT3 FS on sda1, internal journal
[ 54.388674] EXT3-fs: mounted filesystem with ordered data mode.
[ 55.148171] input: Power Button (FF) as /class/input/input5
[ 55.151747] ACPI: Power Button (FF) [PWRF]
[ 55.188038] input: Power Button (CM) as /class/input/input6
[ 55.191635] ACPI: Power Button (CM) [PWRB]
[ 55.203668] No dock devices found.
[ 56.156838] usb-storage: device scan complete
[ 56.163840] scsi 2:0:0:0: Direct-Access IC USB Storage-CFC 301b PQ: 0 ANSI: 0 CCS
[ 56.170838] scsi 2:0:0:1: Direct-Access IC USB Storage-SMC 301b PQ: 0 ANSI: 0 CCS
[ 56.178040] scsi 2:0:0:2: Direct-Access IC USB Storage-MMC 301b PQ: 0 ANSI: 0 CCS
[ 56.185824] scsi 2:0:0:3: Direct-Access IC USB Storage-MSC 301b PQ: 0 ANSI: 0 CCS
[ 56.197835] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 56.197870] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 56.208822] sd 2:0:0:1: [sdd] Attached SCSI removable disk
[ 56.208859] sd 2:0:0:1: Attached scsi generic sg3 type 0
[ 56.218981] sd 2:0:0:2: [sde] Attached SCSI removable disk
[ 56.219019] sd 2:0:0:2: Attached scsi generic sg4 type 0
[ 56.230805] sd 2:0:0:3: [sdf] Attached SCSI removable disk
[ 56.230848] sd 2:0:0:3: Attached scsi generic sg5 type 0
[ 56.810902] eth0: no link during initialization.
[ 56.879682] skge eth1: enabling interface
[ 57.145907] ppdev: user-space parallel port driver
[ 57.603257] audit(1203434140.559:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4935 profile="/usr/sbin/cupsd"
[ 57.764967] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 57.764972] apm: overridden by ACPI.
[ 59.280297] skge eth1: Link is up at 100 Mbps, full duplex, flow control none
[ 59.636184] Failure registering capabilities with primary security module.
[ 60.299672] Bluetooth: Core ver 2.11
[ 60.299780] NET: Registered protocol family 31
[ 60.299782] Bluetooth: HCI device and connection manager initialized
[ 60.299785] Bluetooth: HCI socket layer initialized
[ 60.334198] Bluetooth: L2CAP ver 2.8
[ 60.334203] Bluetooth: L2CAP socket layer initialized
[ 60.338585] Bluetooth: RFCOMM socket layer initialized
[ 60.338662] Bluetooth: RFCOMM TTY layer initialized
[ 60.338664] Bluetooth: RFCOMM ver 1.8
[ 65.561837] NET: Registered protocol family 17
[ 72.089690] NET: Registered protocol family 10
[ 72.089810] lo: Disabled Privacy Extensions
[ 72.090012] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 82.487122] eth1: no IPv6 routers present
[14241.576798] usb 2-2: USB disconnect, address 3
[14244.423243] usb 2-2: new low speed USB device using ohci_hcd and address 8
[14244.637801] usb 2-2: configuration #1 chosen from 1 choice
[14244.648938] input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input7
[14244.648985] input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:02.1-2
[21195.060753] skge eth1: Link is down.
[21263.613207] usb 3-2: new high speed USB device using ehci_hcd and address 7
[21263.765477] usb 3-2: configuration #1 chosen from 1 choice
[21263.801071] scsi3 : SCSI emulation for USB Mass Storage devices
[21263.801889] usb-storage: device found at 7
[21263.801892] usb-storage: waiting for device to settle before scanning
[21268.796932] usb-storage: device scan complete
[21268.798054] scsi 3:0:0:0: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
[21268.799039] scsi 3:0:0:1: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
[21268.800037] scsi 3:0:0:2: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
[21268.801037] scsi 3:0:0:3: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
[21268.803153] sd 3:0:0:0: [sdg] Attached SCSI removable disk
[21268.803200] sd 3:0:0:0: Attached scsi generic sg6 type 0
[21268.805445] sd 3:0:0:1: [sdh] Attached SCSI removable disk
[21268.805488] sd 3:0:0:1: Attached scsi generic sg7 type 0
[21268.807676] sd 3:0:0:2: [sdi] Attached SCSI removable disk
[21268.807721] sd 3:0:0:2: Attached scsi generic sg8 type 0
[21268.809900] sd 3:0:0:3: [sdj] Attached SCSI removable disk
[21268.809944] sd 3:0:0:3: Attached scsi generic sg9 type 0
[21277.259379] sd 3:0:0:2: [sdi] 1984000 512-byte hardware sectors (1016 MB)
[21277.260851] sd 3:0:0:2: [sdi] Write Protect is off
[21277.260854] sd 3:0:0:2: [sdi] Mode Sense: 02 00 00 00
[21277.260857] sd 3:0:0:2: [sdi] Assuming drive cache: write through
[21277.263122] sd 3:0:0:2: [sdi] 1984000 512-byte hardware sectors (1016 MB)
[21277.264497] sd 3:0:0:2: [sdi] Write Protect is off
[21277.264500] sd 3:0:0:2: [sdi] Mode Sense: 02 00 00 00
[21277.264502] sd 3:0:0:2: [sdi] Assuming drive cache: write through
[21277.264505] sdi: sdi1
[21377.563587] skge eth1: Link is up at 100 Mbps, full duplex, flow control none
[21377.564105] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[21393.136013] eth1: no IPv6 routers present
[21464.631502] end_request: I/O error, dev fd0, sector 0
[21476.768615] end_request: I/O error, dev fd0, sector 0
[21554.083122] end_request: I/O error, dev fd0, sector 0
[21566.220142] end_request: I/O error, dev fd0, sector 0
[21770.362910] end_request: I/O error, dev fd0, sector 0
[21782.492497] end_request: I/O error, dev fd0, sector 0
[21794.641521] end_request: I/O error, dev fd0, sector 0
[21803.105524] usb 3-2: USB disconnect, address 7
[21803.254061] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254075] FAT: Directory bread(block 485) failed
[21803.254080] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254084] FAT: Directory bread(block 486) failed
[21803.254090] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254093] FAT: Directory bread(block 487) failed
[21803.254101] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254105] FAT: Directory bread(block 488) failed
[21803.254110] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254113] FAT: Directory bread(block 489) failed
[21803.254118] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254121] FAT: Directory bread(block 490) failed
[21803.254126] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254129] FAT: Directory bread(block 491) failed
[21803.254134] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254137] FAT: Directory bread(block 492) failed
[21803.254142] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254145] FAT: Directory bread(block 493) failed
[21803.254150] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254153] FAT: Directory bread(block 494) failed
[21803.254158] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254162] FAT: Directory bread(block 495) failed
[21803.254168] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254172] FAT: Directory bread(block 496) failed
[21803.254177] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254180] FAT: Directory bread(block 497) failed
[21803.254185] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254188] FAT: Directory bread(block 498) failed
[21803.254193] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254197] FAT: Directory bread(block 499) failed
[21803.254201] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254205] FAT: Directory bread(block 500) failed
[21803.254209] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254213] FAT: Directory bread(block 501) failed
[21803.254217] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254221] FAT: Directory bread(block 502) failed
[21803.254226] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254229] FAT: Directory bread(block 503) failed
[21803.254236] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254239] FAT: Directory bread(block 504) failed
[21803.254244] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254247] FAT: Directory bread(block 505) failed
[21803.254252] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254255] FAT: Directory bread(block 506) failed
[21803.254260] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254263] FAT: Directory bread(block 507) failed
[21803.254271] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254275] FAT: Directory bread(block 508) failed
[21803.254279] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254283] FAT: Directory bread(block 509) failed
[21803.254287] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254291] FAT: Directory bread(block 510) failed
[21803.254296] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254299] FAT: Directory bread(block 511) failed
[21803.254307] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254310] FAT: Directory bread(block 512) failed
[21803.254315] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254318] FAT: Directory bread(block 513) failed
[21803.254323] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254327] FAT: Directory bread(block 514) failed
[21803.254331] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254335] FAT: Directory bread(block 515) failed
[21803.254339] scsi 3:0:0:2: rejecting I/O to dead device
[21803.254343] FAT: Directory bread(block 516) failed
[21803.694609] scsi 3:0:0:2: rejecting I/O to dead device
[21806.793942] end_request: I/O error, dev fd0, sector 0
[21818.939305] end_request: I/O error, dev fd0, sector 0
[21818.939312] Buffer I/O error on device fd0, logical block 0
[21831.088225] end_request: I/O error, dev fd0, sector 0
[21831.088233] Buffer I/O error on device fd0, logical block 0
[21843.225042] end_request: I/O error, dev fd0, sector 0
[21843.225049] Buffer I/O error on device fd0, logical block 0
[21855.370056] end_request: I/O error, dev fd0, sector 0
[21855.370063] Buffer I/O error on device fd0, logical block 0
[21867.515371] end_request: I/O error, dev fd0, sector 0
[21867.515378] Buffer I/O error on device fd0, logical block 0
[21879.664564] end_request: I/O error, dev fd0, sector 0
[21879.664572] Buffer I/O error on device fd0, logical block 0
[21891.805113] end_request: I/O error, dev fd0, sector 0
[21891.805120] Buffer I/O error on device fd0, logical block 0
[21904.089989] end_request: I/O error, dev fd0, sector 0
[21904.089997] Buffer I/O error on device fd0, logical block 0
[21916.235318] end_request: I/O error, dev fd0, sector 0
[21916.235325] Buffer I/O error on device fd0, logical block 0
[21928.376415] end_request: I/O error, dev fd0, sector 0
[21928.376422] Buffer I/O error on device fd0, logical block 0
[21940.525516] end_request: I/O error, dev fd0, sector 0
[21940.525524] Buffer I/O error on device fd0, logical block 0
[21952.678351] end_request: I/O error, dev fd0, sector 0
[21952.678359] Buffer I/O error on device fd0, logical block 0
[21964.823341] end_request: I/O error, dev fd0, sector 0
[21964.823348] Buffer I/O error on device fd0, logical block 0
[21976.968016] end_request: I/O error, dev fd0, sector 0
[21976.968024] Buffer I/O error on device fd0, logical block 0
[21989.121113] end_request: I/O error, dev fd0, sector 0
[21989.121120] Buffer I/O error on device fd0, logical block 0
[22001.262011] end_request: I/O error, dev fd0, sector 0
[22001.262018] Buffer I/O error on device fd0, logical block 0
[22013.407088] end_request: I/O error, dev fd0, sector 0
[22025.548618] end_request: I/O error, dev fd0, sector 0
[22037.701046] end_request: I/O error, dev fd0, sector 0
[22049.846629] end_request: I/O error, dev fd0, sector 0
[22049.846637] Buffer I/O error on device fd0, logical block 0
[22061.999078] end_request: I/O error, dev fd0, sector 0
[22061.999085] Buffer I/O error on device fd0, logical block 0
[23989.978738] usb 3-2: new high speed USB device using ehci_hcd and address 8
[23990.125500] usb 3-2: configuration #1 chosen from 1 choice
[23990.126102] scsi4 : SCSI emulation for USB Mass Storage devices
[23990.126236] usb-storage: device found at 8
[23990.126238] usb-storage: waiting for device to settle before scanning
[23995.118619] usb-storage: device scan complete
[23995.119722] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
[23995.235326] scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
[23995.236385] scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
[23995.237981] scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
[23995.244996] sd 4:0:0:0: [sdg] Attached SCSI removable disk
[23995.245042] sd 4:0:0:0: Attached scsi generic sg6 type 0
[23995.247208] sd 4:0:0:1: [sdh] Attached SCSI removable disk
[23995.247257] sd 4:0:0:1: Attached scsi generic sg7 type 0
[23995.249383] sd 4:0:0:2: [sdi] 1984000 512-byte hardware sectors (1016 MB)
[23995.250832] sd 4:0:0:2: [sdi] Write Protect is off
[23995.250836] sd 4:0:0:2: [sdi] Mode Sense: 02 00 00 00
[23995.250838] sd 4:0:0:2: [sdi] Assuming drive cache: write through
[23995.253829] sd 4:0:0:2: [sdi] 1984000 512-byte hardware sectors (1016 MB)
[23995.255327] sd 4:0:0:2: [sdi] Write Protect is off
[23995.255330] sd 4:0:0:2: [sdi] Mode Sense: 02 00 00 00
[23995.255332] sd 4:0:0:2: [sdi] Assuming drive cache: write through
[23995.255334] sdi: sdi1 sdi2
[23995.258649] sd 4:0:0:2: [sdi] Attached SCSI removable disk
[23995.258694] sd 4:0:0:2: Attached scsi generic sg8 type 0
[23995.260977] sd 4:0:0:3: [sdj] Attached SCSI removable disk
[23995.261026] sd 4:0:0:3: Attached scsi generic sg9 type 0
[24247.905424] sd 4:0:0:2: [sdi] 1984000 512-byte hardware sectors (1016 MB)
[24247.906858] sd 4:0:0:2: [sdi] Write Protect is off
[24247.906861] sd 4:0:0:2: [sdi] Mode Sense: 02 00 00 00
[24247.906864] sd 4:0:0:2: [sdi] Assuming drive cache: write through
[24247.909413] sd 4:0:0:2: [sdi] 1984000 512-byte hardware sectors (1016 MB)
[24247.910852] sd 4:0:0:2: [sdi] Write Protect is off
[24247.910855] sd 4:0:0:2: [sdi] Mode Sense: 02 00 00 00
[24247.910857] sd 4:0:0:2: [sdi] Assuming drive cache: write through
[24247.910860] sdi: sdi1 sdi2
[24368.005455] end_request: I/O error, dev fd0, sector 0
[24380.154472] end_request: I/O error, dev fd0, sector 0
[24392.306905] end_request: I/O error, dev fd0, sector 0
[24404.436502] end_request: I/O error, dev fd0, sector 0
[24416.589218] end_request: I/O error, dev fd0, sector 0
[24416.589226] Buffer I/O error on device fd0, logical block 0
[24428.730407] end_request: I/O error, dev fd0, sector 0
[24428.730415] Buffer I/O error on device fd0, logical block 0
[24447.249738] end_request: I/O error, dev fd0, sector 0
[24459.406563] end_request: I/O error, dev fd0, sector 0
[24600.286846] end_request: I/O error, dev fd0, sector 0
[24612.431794] end_request: I/O error, dev fd0, sector 0
[24621.631982] sd 4:0:0:2: [sdi] 1984000 512-byte hardware sectors (1016 MB)
[24621.633474] sd 4:0:0:2: [sdi] Write Protect is off
[24621.633478] sd 4:0:0:2: [sdi] Mode Sense: 02 00 00 00
[24621.633480] sd 4:0:0:2: [sdi] Assuming drive cache: write through
[24621.636001] sd 4:0:0:2: [sdi] 1984000 512-byte hardware sectors (1016 MB)
[24621.637595] sd 4:0:0:2: [sdi] Write Protect is off
[24621.637598] sd 4:0:0:2: [sdi] Mode Sense: 02 00 00 00
[24621.637600] sd 4:0:0:2: [sdi] Assuming drive cache: write through
[24621.637603] sdi: sdi1 sdi2
[24655.069199] end_request: I/O error, dev fd0, sector 0
[24667.210292] end_request: I/O error, dev fd0, sector 0
[24767.219837] end_request: I/O error, dev fd0, sector 0
[24779.361320] end_request: I/O error, dev fd0, sector 0
[24801.496242] sd 4:0:0:2: [sdi] 1984000 512-byte hardware sectors (1016 MB)
[24801.497790] sd 4:0:0:2: [sdi] Write Protect is off
[24801.497793] sd 4:0:0:2: [sdi] Mode Sense: 02 00 00 00
[24801.497795] sd 4:0:0:2: [sdi] Assuming drive cache: write through
[24801.500260] sd 4:0:0:2: [sdi] 1984000 512-byte hardware sectors (1016 MB)
[24801.501787] sd 4:0:0:2: [sdi] Write Protect is off
[24801.501790] sd 4:0:0:2: [sdi] Mode Sense: 02 00 00 00
[24801.501791] sd 4:0:0:2: [sdi] Assuming drive cache: write through
[24801.501794] sdi: sdi1
[24876.929025] end_request: I/O error, dev fd0, sector 0
[24889.078037] end_request: I/O error, dev fd0, sector 0
[24901.215070] end_request: I/O error, dev fd0, sector 0
[24913.364073] end_request: I/O error, dev fd0, sector 0
[24925.516900] end_request: I/O error, dev fd0, sector 0
[24925.516908] Buffer I/O error on device fd0, logical block 0
[24937.658088] end_request: I/O error, dev fd0, sector 0
[24937.658096] Buffer I/O error on device fd0, logical block 0
[24949.810928] end_request: I/O error, dev fd0, sector 0
[24949.810936] Buffer I/O error on device fd0, logical block 0
[24961.952149] end_request: I/O error, dev fd0, sector 0
[24961.952157] Buffer I/O error on device fd0, logical block 0
[24974.096648] end_request: I/O error, dev fd0, sector 0
[24974.096655] Buffer I/O error on device fd0, logical block 0
[24986.234142] end_request: I/O error, dev fd0, sector 0
[24986.234149] Buffer I/O error on device fd0, logical block 0
[24998.386971] end_request: I/O error, dev fd0, sector 0
[24998.386978] Buffer I/O error on device fd0, logical block 0
[25010.531620] end_request: I/O error, dev fd0, sector 0
[25010.531628] Buffer I/O error on device fd0, logical block 0
[25022.673200] end_request: I/O error, dev fd0, sector 0
[25022.673207] Buffer I/O error on device fd0, logical block 0
[25034.818218] end_request: I/O error, dev fd0, sector 0
[25034.818225] Buffer I/O error on device fd0, logical block 0
[25046.963202] end_request: I/O error, dev fd0, sector 0
[25046.963209] Buffer I/O error on device fd0, logical block 0
[25058.647946] usb 3-2: reset high speed USB device using ehci_hcd and address 8
[25059.116041] end_request: I/O error, dev fd0, sector 0
[25059.116048] Buffer I/O error on device fd0, logical block 0
[25071.261672] end_request: I/O error, dev fd0, sector 0
[25071.261680] Buffer I/O error on device fd0, logical block 0
[25083.401807] end_request: I/O error, dev fd0, sector 0
[25083.401815] Buffer I/O error on device fd0, logical block 0
[25095.539281] end_request: I/O error, dev fd0, sector 0
[25095.539289] Buffer I/O error on device fd0, logical block 0
[25107.692077] end_request: I/O error, dev fd0, sector 0
[25107.692084] Buffer I/O error on device fd0, logical block 0
[25119.836726] end_request: I/O error, dev fd0, sector 0
[25131.966315] end_request: I/O error, dev fd0, sector 0
[25144.127128] end_request: I/O error, dev fd0, sector 0
[25156.263852] end_request: I/O error, dev fd0, sector 0
[25168.408790] end_request: I/O error, dev fd0, sector 0
[25173.298801] usb 3-2: USB disconnect, address 8
[25180.538386] end_request: I/O error, dev fd0, sector 0
[25180.538393] Buffer I/O error on device fd0, logical block 0
[25192.683366] end_request: I/O error, dev fd0, sector 0
[25192.683373] Buffer I/O error on device fd0, logical block 0
macgyver@macgyver-desktop:/proc$