Part of Slepp's Projects — Pastebin — TURL — Imagebin — Filebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate

Paste Actions

Download Raw
Embed
Post to Twitter
Remove Paste

Paste Details

Raw format, 9 years 10 months old.

Advertising

Miscellany
Monday, February 18th, 2008 at 7:26:37pm UTC 

  1. [    0.000000] Linux version 2.6.22-14-generic ([email protected]) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
  2. [    0.000000] BIOS-provided physical RAM map:
  3. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  4. [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  5. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  6. [    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
  7. [    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
  8. [    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
  9. [    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
  10. [    0.000000] 0MB HIGHMEM available.
  11. [    0.000000] 511MB LOWMEM available.
  12. [    0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
  13. [    0.000000] Zone PFN ranges:
  14. [    0.000000]   DMA             0 ->     4096
  15. [    0.000000]   Normal       4096 ->   131056
  16. [    0.000000]   HighMem    131056 ->   131056
  17. [    0.000000] early_node_map[1] active PFN ranges
  18. [    0.000000]     0:        0 ->   131056
  19. [    0.000000] On node 0 totalpages: 131056
  20. [    0.000000]   DMA zone: 32 pages used for memmap
  21. [    0.000000]   DMA zone: 0 pages reserved
  22. [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
  23. [    0.000000]   Normal zone: 991 pages used for memmap
  24. [    0.000000]   Normal zone: 125969 pages, LIFO batch:31
  25. [    0.000000]   HighMem zone: 0 pages used for memmap
  26. [    0.000000] DMI 2.2 present.
  27. [    0.000000] ACPI: RSDP signature @ 0xC00F70A0 checksum 0
  28. [    0.000000] ACPI: RSDP 000F70A0, 0014 (r0 IntelR)
  29. [    0.000000] ACPI: RSDT 1FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
  30. [    0.000000] ACPI: FACP 1FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
  31. [    0.000000] ACPI: DSDT 1FFF30C0, 2311 (r1 INTELR AWRDACPI     1000 MSFT  100000C)
  32. [    0.000000] ACPI: FACS 1FFF0000, 0040
  33. [    0.000000] ACPI: BOOT 1FFF5400, 0028 (r1 IntelR                 0             0)
  34. [    0.000000] ACPI: PM-Timer IO Port: 0x4008
  35. [    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
  36. [    0.000000] Built 1 zonelists.  Total pages: 130033
  37. [    0.000000] Kernel command line: root=UUID=cd05e507-790d-4f08-9873-19b8740e12a0 ro quiet splash
  38. [    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
  39. [    0.000000] mapped APIC to ffffd000 (0140c000)
  40. [    0.000000] Enabling fast FPU save and restore... done.
  41. [    0.000000] Initializing CPU#0
  42. [    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
  43. [    0.000000] Detected 350.800 MHz processor.
  44. [   56.689290] Console: colour VGA+ 80x25
  45. [   56.690946] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  46. [   56.692538] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  47. [   56.773236] Memory: 508172k/524224k available (2015k kernel code, 15428k reserved, 915k data, 364k init, 0k highmem)
  48. [   56.773294] virtual kernel memory layout:
  49. [   56.773301]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
  50. [   56.773310]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  51. [   56.773319]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
  52. [   56.773327]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
  53. [   56.773335]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
  54. [   56.773343]       .data : 0xc02f7e86 - 0xc03dce84   ( 915 kB)
  55. [   56.773352]       .text : 0xc0100000 - 0xc02f7e86   (2015 kB)
  56. [   56.773371] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  57. [   56.773553] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
  58. [   56.853605] Calibrating delay using timer specific routine.. 702.58 BogoMIPS (lpj=1405175)
  59. [   56.853735] Security Framework v1.0.0 initialized
  60. [   56.853773] SELinux:  Disabled at boot.
  61. [   56.853856] Mount-cache hash table entries: 512
  62. [   56.854461] CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
  63. [   56.854520] CPU: L1 I cache: 16K, L1 D cache: 16K
  64. [   56.854536] CPU: L2 cache: 512K
  65. [   56.854551] CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
  66. [   56.854607] Compat vDSO mapped to ffffe000.
  67. [   56.854667] Checking 'hlt' instruction... OK.
  68. [   56.869730] SMP alternatives: switching to UP code
  69. [   56.870516] Freeing SMP alternatives: 11k freed
  70. [   56.871860] Early unpacking initramfs... done
  71. [   58.715274] ACPI: Core revision 20070126
  72. [   58.715615] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
  73. [   58.722581] ACPI: setting ELCR to 0200 (from 0ca0)
  74. [   58.725896] CPU0: Intel Pentium II (Deschutes) stepping 01
  75. [   58.725925] SMP motherboard not detected.
  76. [   58.725938] Local APIC not detected. Using dummy APIC emulation.
  77. [   58.726167] Brought up 1 CPUs
  78. [   58.726770] Booting paravirtualized kernel on bare hardware
  79. [   58.727011] Time: 18:43:13  Date: 01/18/108
  80. [   58.727141] NET: Registered protocol family 16
  81. [   58.727664] EISA bus registered
  82. [   58.727708] ACPI: bus type pci registered
  83. [   58.758201] PCI: PCI BIOS revision 2.10 entry at 0xfb520, last bus=1
  84. [   58.758216] PCI: Using configuration type 1
  85. [   58.758228] Setting up standard PCI resources
  86. [   58.776921] ACPI: EC: Look up EC in DSDT
  87. [   58.790846] ACPI: Interpreter enabled
  88. [   58.790862] ACPI: (supports S0 S1 S4 S5)
  89. [   58.790966] ACPI: Using PIC for interrupt routing
  90. [   58.808080] ACPI: PCI Root Bridge [PCI0] (0000:00)
  91. [   58.808111] PCI: Probing PCI hardware (bus 00)
  92. [   58.808752] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
  93. [   58.808764] * this clock source is slow. Consider trying other clock sources
  94. [   58.808845] PCI quirk: region 4000-403f claimed by PIIX4 ACPI
  95. [   58.808862] PCI quirk: region 5000-500f claimed by PIIX4 SMB
  96. [   58.809712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  97. [   58.876579] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  98. [   58.877164] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  99. [   58.877776] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  100. [   58.878357] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
  101. [   58.878905] Linux Plug and Play Support v0.97 (c) Adam Belay
  102. [   58.878964] pnp: PnP ACPI init
  103. [   58.879013] ACPI: bus type pnp registered
  104. [   58.889271] pnp: PnP ACPI: found 9 devices
  105. [   58.889287] ACPI: ACPI bus type pnp unregistered
  106. [   58.889311] PnPBIOS: Disabled by ACPI PNP
  107. [   58.889596] PCI: Using ACPI for IRQ routing
  108. [   58.889616] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  109. [   58.897121] NET: Registered protocol family 8
  110. [   58.897136] NET: Registered protocol family 20
  111. [   58.897498] pnp: 00:00: iomem range 0xd4600-0xd7fff has been reserved
  112. [   58.897520] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
  113. [   58.897538] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
  114. [   58.897557] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
  115. [   58.897669] Time: tsc clocksource has been installed.
  116. [   58.929919] PCI: Bridge: 0000:00:01.0
  117. [   58.929934]   IO window: disabled.
  118. [   58.929952]   MEM window: d4000000-d5ffffff
  119. [   58.929968]   PREFETCH window: d6000000-d7ffffff
  120. [   58.930042] NET: Registered protocol family 2
  121. [   58.969929] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  122. [   58.970202] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
  123. [   58.971180] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  124. [   58.971827] TCP: Hash tables configured (established 16384 bind 16384)
  125. [   58.971842] TCP reno registered
  126. [   58.982340] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
  127. [   60.614732]  it is
  128. [   62.518338] Freeing initrd memory: 7054k freed
  129. [   62.518786] Simple Boot Flag at 0x34 set to 0x1
  130. [   62.519931] audit: initializing netlink socket (disabled)
  131. [   62.519989] audit(1203360196.628:1): initialized
  132. [   62.536433] VFS: Disk quotas dquot_6.5.1
  133. [   62.536850] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  134. [   62.537607] io scheduler noop registered
  135. [   62.537623] io scheduler anticipatory registered
  136. [   62.537636] io scheduler deadline registered
  137. [   62.537803] io scheduler cfq registered (default)
  138. [   62.537848] Limiting direct PCI/PCI transfers.
  139. [   62.537923] Boot video device is 0000:01:00.0
  140. [   62.538763] isapnp: Scanning for PnP cards...
  141. [   62.893661] isapnp: No Plug & Play device found
  142. [   63.106910] Real Time Clock Driver v1.12ac
  143. [   63.107475] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  144. [   63.115186] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  145. [   63.116068] input: Macintosh mouse button emulation as /class/input/input0
  146. [   63.116579] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  147. [   63.119773] serio: i8042 KBD port at 0x60,0x64 irq 1
  148. [   63.119802] serio: i8042 AUX port at 0x60,0x64 irq 12
  149. [   63.120995] mice: PS/2 mouse device common for all mice
  150. [   63.121904] EISA: Probing bus 0 at eisa.0
  151. [   63.121964] Cannot allocate resource for EISA slot 4
  152. [   63.121978] Cannot allocate resource for EISA slot 5
  153. [   63.122014] EISA: Detected 0 cards.
  154. [   63.122524] TCP cubic registered
  155. [   63.122623] NET: Registered protocol family 1
  156. [   63.122765] Using IPI No-Shortcut mode
  157. [   63.123539]   Magic number: 12:919:746
  158. [   63.125895] Freeing unused kernel memory: 364k freed
  159. [   63.161590] input: AT Translated Set 2 keyboard as /class/input/input1
  160. [   65.307727] AppArmor: AppArmor initialized<5>audit(1203360199.128:2):  type=1505 info="AppArmor initialized" pid=1086
  161. [   65.364454] fuse init (API version 7.8)
  162. [   65.396697] Failure registering capabilities with primary security module.
  163. [   65.435240] ACPI: Fan [FAN] (on)
  164. [   65.474595] ACPI: CPU0 (power states: C1[C1] C2[C2])
  165. [   65.474624] ACPI: Processor [CPU0] (supports 2 throttling states)
  166. [   65.486471] ACPI: Thermal Zone [THRM] (38 C)
  167. [   68.435342] SCSI subsystem initialized
  168. [   68.513933] libata version 2.21 loaded.
  169. [   68.558361] ata_piix 0000:00:07.1: version 2.11
  170. [   68.559123] scsi0 : ata_piix
  171. [   68.559371] scsi1 : ata_piix
  172. [   68.559548] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
  173. [   68.559572] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
  174. [   68.674848] usbcore: registered new interface driver usbfs
  175. [   68.674977] usbcore: registered new interface driver hub
  176. [   68.675130] usbcore: registered new device driver usb
  177. [   68.685230] USB Universal Host Controller Interface driver v3.0
  178. [   68.730099] ata1.00: ATA-5: WDC WD1000BB-32CCB0, 22.04A22, max UDMA/100
  179. [   68.730125] ata1.00: 195371568 sectors, multi 16: LBA
  180. [   68.731096] ata1.01: ATA-5: WDC WD1000BB-32CCB0, 22.04A22, max UDMA/100
  181. [   68.731116] ata1.01: 195371568 sectors, multi 16: LBA
  182. [   68.746101] ata1.00: configured for UDMA/33
  183. [   68.762067] ata1.01: configured for UDMA/33
  184. [   68.908624] 8139too Fast Ethernet driver 0.9.28
  185. [   69.081125] ata2.00: ATAPI: LITE-ON DVD+RW LDW-401S, ES0G, max UDMA/33
  186. [   69.253137] ata2.00: configured for UDMA/33
  187. [   69.258442] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1000BB-32C 22.0 PQ: 0 ANSI: 5
  188. [   69.265080] scsi 0:0:1:0: Direct-Access     ATA      WDC WD1000BB-32C 22.0 PQ: 0 ANSI: 5
  189. [   69.266094] scsi 1:0:0:0: CD-ROM            LITE-ON  DVD+RW LDW-401S  ES0G PQ: 0 ANSI: 5
  190. [   69.268215] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
  191. [   69.268236] PCI: setting IRQ 7 as level-triggered
  192. [   69.268250] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
  193. [   69.268295] uhci_hcd 0000:00:07.2: UHCI Host Controller
  194. [   69.268761] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
  195. [   69.268833] uhci_hcd 0000:00:07.2: irq 7, io base 0x0000d000
  196. [   69.269594] usb usb1: configuration #1 chosen from 1 choice
  197. [   69.269765] hub 1-0:1.0: USB hub found
  198. [   69.269817] hub 1-0:1.0: 2 ports detected
  199. [   69.375299] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
  200. [   69.375323] PCI: setting IRQ 10 as level-triggered
  201. [   69.375337] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
  202. [   69.375981] eth0: RealTek RTL8139 at 0xe0812000, 00:50:ba:b1:dc:55, IRQ 10
  203. [   69.375998] eth0:  Identified 8139 chip type 'RTL-8139C'
  204. [   69.376958] pata_sil680 0000:00:0f.0: version 0.4.6
  205. [   69.376987] sil680: BA5_EN = 1 clock = 00
  206. [   69.377003] sil680: BA5_EN = 1 clock = 10
  207. [   69.377031] sil680: 133MHz clock.
  208. [   69.377803] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
  209. [   69.377821] PCI: setting IRQ 11 as level-triggered
  210. [   69.377834] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
  211. [   69.378247] scsi2 : pata_sil680
  212. [   69.378510] scsi3 : pata_sil680
  213. [   69.378695] ata3: PATA max UDMA/133 cmd 0x0001dc00 ctl 0x0001e002 bmdma 0x0001ec00 irq 11
  214. [   69.378719] ata4: PATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e802 bmdma 0x0001ec08 irq 11
  215. [   69.560914] ata3.00: ATA-8: WDC WD5000AAKB-00YSA0, 12.01C02, max UDMA/100
  216. [   69.560939] ata3.00: 976773168 sectors, multi 16: LBA48
  217. [   69.561213] ata3.01: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133
  218. [   69.561232] ata3.01: 398297088 sectors, multi 16: LBA48
  219. [   69.577890] ata3.00: configured for UDMA/100
  220. [   69.593475] ata3.01: configured for UDMA/133
  221. [   69.773706] ata4.00: ATA-7: HDS724040KLAT80, KFAOAC6A, max UDMA/133
  222. [   69.773731] ata4.00: 781422768 sectors, multi 16: LBA48
  223. [   69.774009] ata4.01: ATA-7: Maxtor 7Y250P0, YAR41BW0, max UDMA/133
  224. [   69.774028] ata4.01: 490234752 sectors, multi 16: LBA48
  225. [   69.808239] ata4.00: configured for UDMA/133
  226. [   69.821447] ata4.01: configured for UDMA/133
  227. [   69.828992] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKB-0 12.0 PQ: 0 ANSI: 5
  228. [   69.832960] scsi 2:0:1:0: Direct-Access     ATA      Maxtor 6Y200P0   YAR4 PQ: 0 ANSI: 5
  229. [   69.840982] scsi 3:0:0:0: Direct-Access     ATA      HDS724040KLAT80  KFAO PQ: 0 ANSI: 5
  230. [   69.855990] scsi 3:0:1:0: Direct-Access     ATA      Maxtor 7Y250P0   YAR4 PQ: 0 ANSI: 5
  231. [   69.880943] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
  232. [   69.884669] sd 0:0:0:0: [sda] Write Protect is off
  233. [   69.884690] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  234. [   69.884887] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  235. [   69.885188] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
  236. [   69.885270] sd 0:0:0:0: [sda] Write Protect is off
  237. [   69.885288] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  238. [   69.885418] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  239. [   69.885450]  sda: sda1 sda2 < sda5 >
  240. [   70.027902] sd 0:0:0:0: [sda] Attached SCSI disk
  241. [   70.034819] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
  242. [   70.034842] Uniform CD-ROM driver Revision: 3.20
  243. [   70.035948] sr 1:0:0:0: Attached scsi CD-ROM sr0
  244. [   70.044883] sd 0:0:1:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
  245. [   70.048684] sd 0:0:1:0: [sdb] Write Protect is off
  246. [   70.048705] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
  247. [   70.048945] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  248. [   70.049239] sd 0:0:1:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
  249. [   70.049320] sd 0:0:1:0: [sdb] Write Protect is off
  250. [   70.049338] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
  251. [   70.049469] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  252. [   70.049492]  sdb:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
  253. [   70.096848] sd 0:0:1:0: Attached scsi generic sg1 type 0
  254. [   70.097836] sr 1:0:0:0: Attached scsi generic sg2 type 5
  255. [   70.098868] scsi 2:0:0:0: Attached scsi generic sg3 type 0
  256. [   70.099853] scsi 2:0:1:0: Attached scsi generic sg4 type 0
  257. [   70.100901] scsi 3:0:0:0: Attached scsi generic sg5 type 0
  258. [   70.101935] scsi 3:0:1:0: Attached scsi generic sg6 type 0
  259. [   70.157136]  sdb1
  260. [   70.159461] sd 0:0:1:0: [sdb] Attached SCSI disk
  261. [   70.182741] sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
  262. [   70.183148] sd 2:0:0:0: [sdc] Write Protect is off
  263. [   70.183168] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  264. [   70.184271] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  265. [   70.185141] sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
  266. [   70.185526] sd 2:0:0:0: [sdc] Write Protect is off
  267. [   70.185546] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  268. [   70.186665] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  269. [   70.186688]  sdc: sdc1
  270. [   70.208709] sd 2:0:0:0: [sdc] Attached SCSI disk
  271. [   70.211018] sd 2:0:1:0: [sdd] 398297088 512-byte hardware sectors (203928 MB)
  272. [   70.211107] sd 2:0:1:0: [sdd] Write Protect is off
  273. [   70.211126] sd 2:0:1:0: [sdd] Mode Sense: 00 3a 00 00
  274. [   70.211260] sd 2:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  275. [   70.211557] sd 2:0:1:0: [sdd] 398297088 512-byte hardware sectors (203928 MB)
  276. [   70.211638] sd 2:0:1:0: [sdd] Write Protect is off
  277. [   70.211656] sd 2:0:1:0: [sdd] Mode Sense: 00 3a 00 00
  278. [   70.211788] sd 2:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  279. [   70.211810]  sdd: sdd1
  280. [   70.233095] sd 2:0:1:0: [sdd] Attached SCSI disk
  281. [   70.240907] sd 3:0:0:0: [sde] 781422768 512-byte hardware sectors (400088 MB)
  282. [   70.244877] sd 3:0:0:0: [sde] Write Protect is off
  283. [   70.244899] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
  284. [   70.247357] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  285. [   70.247656] sd 3:0:0:0: [sde] 781422768 512-byte hardware sectors (400088 MB)
  286. [   70.247739] sd 3:0:0:0: [sde] Write Protect is off
  287. [   70.247757] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
  288. [   70.247889] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  289. [   70.247912]  sde: sde1
  290. [   70.266626] sd 3:0:0:0: [sde] Attached SCSI disk
  291. [   70.267976] sd 3:0:1:0: [sdf] 490234752 512-byte hardware sectors (251000 MB)
  292. [   70.268060] sd 3:0:1:0: [sdf] Write Protect is off
  293. [   70.268079] sd 3:0:1:0: [sdf] Mode Sense: 00 3a 00 00
  294. [   70.268212] sd 3:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  295. [   70.268491] sd 3:0:1:0: [sdf] 490234752 512-byte hardware sectors (251000 MB)
  296. [   70.268573] sd 3:0:1:0: [sdf] Write Protect is off
  297. [   70.268591] sd 3:0:1:0: [sdf] Mode Sense: 00 3a 00 00
  298. [   70.268724] sd 3:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  299. [   70.268746]  sdf: sdf1
  300. [   70.274018] sd 3:0:1:0: [sdf] Attached SCSI disk
  301. [   14.544000] Marking TSC unstable due to: possible TSC halt in C2.
  302. [   14.548000] Time: acpi_pm clocksource has been installed.
  303. [   14.876000] Attempting manual resume
  304. [   14.876000] swsusp: Resume From Partition 8:5
  305. [   14.876000] PM: Checking swsusp image.
  306. [   14.876000] PM: Resume from disk failed.
  307. [   15.036000] kjournald starting.  Commit interval 5 seconds
  308. [   15.036000] EXT3-fs: mounted filesystem with ordered data mode.
  309. [   26.692000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  310. [   28.392000] NET: Registered protocol family 10
  311. [   28.392000] lo: Disabled Privacy Extensions
  312. [   32.092000] Linux agpgart interface v0.102 (c) Dave Jones
  313. [   32.208000] agpgart: Detected an Intel 440BX Chipset.
  314. [   32.216000] agpgart: AGP aperture is 64M @ 0xd0000000
  315. [   33.420000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  316. [   33.488000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  317. [   33.564000] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
  318. [   35.796000] acx: Loaded combined PCI/USB driver, firmware_ver=default
  319. [   35.796000] acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
  320. [   35.796000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
  321. [   35.796000] PCI: setting IRQ 5 as level-triggered
  322. [   35.796000] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
  323. [   35.796000] acx: found ACX111-based wireless network card at 0000:00:11.0, irq:5, phymem1:0xD9020000, phymem2:0xD9000000, mem1:0xe0954000, mem1_size:8192, mem2:0xe0a40000, mem2_size:131072
  324. [   35.796000] acx: loading firmware for acx1111 chipset with radio ID 16
  325. [   37.448000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
  326. [   37.496000] input: PC Speaker as /class/input/input3
  327. [   38.536000] eth0: no IPv6 routers present
  328. [   42.456000] NVS_vendor_offs:01CD probe_delay:200 eof_memory:1114112
  329. [   42.456000] CCAModes:04 Diversity:01 ShortPreOpt:01 PBCC:01 ChanAgil:00 PHY:05 Temp:01
  330. [   42.456000] AntennaID:00 Len:02 Data:01 02
  331. [   42.456000] PowerLevelID:01 Len:02 Data:001E 000A
  332. [   42.456000] DataRatesID:02 Len:05 Data:02 04 11 22 44
  333. [   42.456000] DomainID:03 Len:06 Data:10 20 30 31 32 41
  334. [   42.456000] ProductID:04 Len:09 Data:TI ACX100
  335. [   42.456000] ManufacturerID:05 Len:07 Data:TI Test
  336. [   42.516000] acx: === chipset TNETW1130, radio type 0x16 (Radia), form factor 0x01 ((mini-)PCI / CardBus), EEPROM version 0x05: uploaded firmware 'Rev 1.2.1.34' ===
  337. [   42.516000] acx v0.3.36: net device wlan0, driver compiled against wireless extensions 22 and Linux 2.6.22-14-generic
  338. [   42.516000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
  339. [   42.524000] usbcore: registered new interface driver acx_usb
  340. [   42.908000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  341. [   43.708000] lp: driver loaded but no devices found
  342. [   43.888000] Adding 1510068k swap on /dev/sda5.  Priority:-1 extents:1 across:1510068k
  343. [   44.348000] NET: Registered protocol family 17
  344. [   44.532000] EXT3 FS on sda1, internal journal
  345. [   45.172000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  346. [   45.704000] wlan0: duplicate address detected!
  347. [   48.772000] No dock devices found.
  348. [   49.052000] input: Power Button (FF) as /class/input/input4
  349. [   49.052000] ACPI: Power Button (FF) [PWRF]
  350. [   49.100000] input: Power Button (CM) as /class/input/input5
  351. [   49.100000] ACPI: Power Button (CM) [PWRB]
  352. [   54.120000] ppdev: user-space parallel port driver
  353. [   55.444000] audit(1203360245.989:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4700 profile="/usr/sbin/cupsd"
  354. [   55.772000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
  355. [   55.772000] apm: overridden by ACPI.
  356. [   56.404000] Failure registering capabilities with primary security module.
  357. [ 1230.096000] kjournald starting.  Commit interval 5 seconds
  358. [ 1230.096000] EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended
  359. [ 1230.100000] EXT3 FS on sdb1, internal journal
  360. [ 1230.100000] EXT3-fs: mounted filesystem with ordered data mode.
  361. [ 1245.044000] kjournald starting.  Commit interval 5 seconds
  362. [ 1245.044000] EXT3-fs warning: checktime reached, running e2fsck is recommended
  363. [ 1245.052000] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
  364. [ 1245.052000] ata4.00: (BMDMA stat 0x4)
  365. [ 1245.052000] ata4.00: cmd ca/00:08:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out
  366. [ 1245.052000]          res 51/84:00:46:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
  367. [ 1245.052000] ata4: soft resetting port
  368. [ 1246.436000] irq 11: nobody cared (try booting with the "irqpoll" option)
  369. [ 1246.436000]  [<c015b5b4>] __report_bad_irq+0x24/0x80
  370. [ 1246.436000]  [<c015b872>] note_interrupt+0x262/0x2a0
  371. [ 1246.436000]  [<c015aad0>] handle_IRQ_event+0x30/0x60
  372. [ 1246.436000]  [<c015c48b>] handle_level_irq+0xdb/0x110
  373. [ 1246.436000]  [<c0106b1b>] do_IRQ+0x3b/0x70
  374. [ 1246.436000]  [<c0105223>] common_interrupt+0x23/0x30
  375. [ 1246.436000]  [<c012d68b>] __do_softirq+0x5b/0x110
  376. [ 1246.436000]  [<c012d795>] do_softirq+0x55/0x60
  377. [ 1246.436000]  [<c012da7d>] irq_exit+0x6d/0x80
  378. [ 1246.436000]  [<c0106b20>] do_IRQ+0x40/0x70
  379. [ 1246.436000]  [<c0105223>] common_interrupt+0x23/0x30
  380. [ 1246.436000]  [<c02f2110>] schedule+0x2f0/0x890
  381. [ 1246.436000]  [<c01317e7>] lock_timer_base+0x27/0x60
  382. [ 1246.436000]  [<c013192f>] __mod_timer+0x9f/0xb0
  383. [ 1246.436000]  [<c02f2ebc>] schedule_timeout+0x4c/0xd0
  384. [ 1246.436000]  [<c01fe6c6>] __delay+0x6/0x10
  385. [ 1246.436000]  [<c0131470>] process_timeout+0x0/0x10
  386. [ 1246.436000]  [<c02f2eb7>] schedule_timeout+0x47/0xd0
  387. [ 1246.436000]  [<c02f29a9>] wait_for_completion_timeout+0x99/0x100
  388. [ 1246.436000]  [<c0122bc0>] default_wake_function+0x0/0x10
  389. [ 1246.436000]  [<e08a26d8>] ata_exec_internal_sg+0x258/0x3f0 [libata]
  390. [ 1246.436000]  [<e08a28f8>] ata_exec_internal+0x88/0xd0 [libata]
  391. [ 1246.436000]  [<e08a2aff>] ata_dev_read_id+0x1bf/0x430 [libata]
  392. [ 1246.436000]  [<e08a31c3>] ata_dev_configure+0x153/0xef0 [libata]
  393. [ 1246.436000]  [<e08a2dc2>] ata_dev_reread_id+0x52/0x200 [libata]
  394. [ 1246.436000]  [<c013bdeb>] autoremove_wake_function+0x1b/0x50
  395. [ 1246.436000]  [<c011fff9>] __wake_up_common+0x39/0x60
  396. [ 1246.436000]  [<e08a3faa>] ata_dev_revalidate+0x4a/0xf0 [libata]
  397. [ 1246.436000]  [<e08aa3af>] ata_eh_about_to_do+0x5f/0x90 [libata]
  398. [ 1246.436000]  [<e08aad25>] ata_do_eh+0x6c5/0x17d0 [libata]
  399. [ 1246.436000]  [<e084a410>] sil680_bus_reset+0x0/0xb0 [pata_sil680]
  400. [ 1246.436000]  [<e08a5120>] ata_std_prereset+0x0/0xe0 [libata]
  401. [ 1246.436000]  [<e08a9c02>] ata_bmdma_irq_clear+0x12/0x30 [libata]
  402. [ 1246.436000]  [<e08a9ac1>] ata_bmdma_drive_eh+0xf1/0x180 [libata]
  403. [ 1246.436000]  [<e084a410>] sil680_bus_reset+0x0/0xb0 [pata_sil680]
  404. [ 1246.436000]  [<e084a3c1>] sil680_error_handler+0x21/0x30 [pata_sil680]
  405. [ 1246.436000]  [<e08a18b0>] ata_std_postreset+0x0/0xb0 [libata]
  406. [ 1246.436000]  [<e08ac44b>] ata_scsi_error+0x19b/0x5b0 [libata]
  407. [ 1246.436000]  [<e087d830>] scsi_error_handler+0x0/0x510 [scsi_mod]
  408. [ 1246.436000]  [<e087d8d6>] scsi_error_handler+0xa6/0x510 [scsi_mod]
  409. [ 1246.436000]  [<c01205c0>] complete+0x40/0x60
  410. [ 1246.436000]  [<e087d830>] scsi_error_handler+0x0/0x510 [scsi_mod]
  411. [ 1246.436000]  [<c013bb12>] kthread+0x42/0x70
  412. [ 1246.436000]  [<c013bad0>] kthread+0x0/0x70
  413. [ 1246.436000]  [<c0105487>] kernel_thread_helper+0x7/0x10
  414. [ 1246.436000]  =======================
  415. [ 1246.436000] handlers:
  416. [ 1246.436000] [<e08a5600>] (ata_interrupt+0x0/0x200 [libata])
  417. [ 1246.436000] Disabling IRQ #11
  418. [ 1276.448000] ata4.00: qc timeout (cmd 0x27)
  419. [ 1276.448000] ata4.00: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (781422768)
  420. [ 1276.448000] ata4.00: failed to set xfermode (err_mask=0x40)
  421. [ 1276.448000] ata4: failed to recover some devices, retrying in 5 secs
  422. [ 1281.452000] ata4: soft resetting port
  423. [ 1311.616000] ata4.01: qc timeout (cmd 0x27)
  424. [ 1311.616000] ata4.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (490234752)
  425. [ 1311.616000] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x40)
  426. [ 1311.616000] ata4.00: revalidation failed (errno=-5)
  427. [ 1311.616000] ata4.00: limiting speed to UDMA/133:PIO3
  428. [ 1311.616000] ata4: failed to recover some devices, retrying in 5 secs
  429. [ 1316.620000] ata4: soft resetting port
  430. [ 1346.784000] ata4.01: qc timeout (cmd 0x27)
  431. [ 1346.784000] ata4.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (490234752)
  432. [ 1346.784000] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x40)
  433. [ 1346.784000] ata4.00: revalidation failed (errno=-5)
  434. [ 1346.784000] ata4.00: disabled
  435. [ 1346.784000] ata4: failed to recover some devices, retrying in 5 secs
  436. [ 1351.788000] ata4.01: failed to set xfermode (err_mask=0x40)
  437. [ 1351.788000] ata4: failed to recover some devices, retrying in 5 secs
  438. [ 1356.792000] ata4: soft resetting port
  439. [ 1386.956000] ata4.01: qc timeout (cmd 0x27)
  440. [ 1386.956000] ata4.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (490234752)
  441. [ 1386.956000] ata4.01: failed to set xfermode (err_mask=0x40)
  442. [ 1386.956000] ata4.01: limiting speed to UDMA/133:PIO3
  443. [ 1386.956000] ata4: failed to recover some devices, retrying in 5 secs
  444. [ 1391.960000] ata4: soft resetting port
  445. [ 1401.580000] wlan0: got deauth frame with reason 2 (prev auth is not valid)
  446. [ 1422.124000] ata4.01: qc timeout (cmd 0x27)
  447. [ 1422.124000] ata4.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (490234752)
  448. [ 1422.124000] ata4.01: failed to set xfermode (err_mask=0x40)
  449. [ 1422.124000] ata4.01: disabled
  450. [ 1422.628000] ata4: EH complete
  451. [ 1422.628000] sd 3:0:0:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  452. [ 1422.628000] end_request: I/O error, dev sde, sector 63
  453. [ 1422.628000] Buffer I/O error on device sde1, logical block 0
  454. [ 1422.628000] lost page write due to I/O error on sde1
  455. [ 1422.628000] EXT3 FS on sde1, internal journal
  456. [ 1422.628000] EXT3-fs: recovery complete.
  457. [ 1422.628000] EXT3-fs: mounted filesystem with ordered data mode.
  458. [ 1422.636000] sd 3:0:0:0: [sde] READ CAPACITY failed
  459. [ 1422.636000] sd 3:0:0:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  460. [ 1422.636000] sd 3:0:0:0: [sde] Sense not available.
  461. [ 1422.640000] sd 3:0:0:0: [sde] Write Protect is off
  462. [ 1422.640000] sd 3:0:0:0: [sde] Mode Sense: 00 00 00 00
  463. [ 1422.640000] sd 3:0:0:0: [sde] Asking for cache data failed
  464. [ 1422.640000] sd 3:0:0:0: [sde] Assuming drive cache: write through
  465. [ 1422.680000] EXT3-fs error (device sde1): ext3_find_entry: reading directory #2 offset 0
  466. [ 1422.716000] Buffer I/O error on device sde1, logical block 0
  467. [ 1422.716000] lost page write due to I/O error on sde1
  468. [ 1422.716000] EXT3-fs error (device sde1): ext3_find_entry: reading directory #2 offset 0
  469. [ 1422.732000] Buffer I/O error on device sde1, logical block 0
  470. [ 1422.732000] lost page write due to I/O error on sde1
  471. [ 1496.996000] EXT3-fs error (device sde1): ext3_readdir: directory #2 contains a hole at offset 0
  472. [ 1497.004000] Buffer I/O error on device sde1, logical block 0
  473. [ 1497.004000] lost page write due to I/O error on sde1
  474. [ 1508.264000] Buffer I/O error on device sde1, logical block 1569
  475. [ 1508.264000] lost page write due to I/O error on sde1
  476. [ 1508.264000] Buffer I/O error on device sde1, logical block 1572
  477. [ 1508.264000] lost page write due to I/O error on sde1
  478. [ 1508.264000] Aborting journal on device sde1.
  479. [ 1508.268000] journal commit I/O error
  480. [ 1508.268000] Buffer I/O error on device sde1, logical block 1051
  481. [ 1508.268000] lost page write due to I/O error on sde1
  482. [ 1508.268000] Buffer I/O error on device sde1, logical block 1569
  483. [ 1508.268000] lost page write due to I/O error on sde1
  484. [ 1508.272000] Buffer I/O error on device sde1, logical block 0
  485. [ 1508.272000] lost page write due to I/O error on sde1
  486. [ 1716.876000] EXT3-fs: unable to read superblock
  487. [ 1761.440000] ata3.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  488. [ 1761.440000] ata3.01: cmd c8/00:02:41:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 1024 in
  489. [ 1761.440000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
  490. [ 1761.440000] ata3: soft resetting port
  491. [ 1791.604000] ata3.01: qc timeout (cmd 0x27)
  492. [ 1791.604000] ata3.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (398297088)
  493. [ 1791.604000] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x40)
  494. [ 1791.604000] ata3.00: revalidation failed (errno=-5)
  495. [ 1791.604000] ata3: failed to recover some devices, retrying in 5 secs
  496. [ 1796.608000] ata3: soft resetting port
  497. [ 1826.772000] ata3.01: qc timeout (cmd 0x27)
  498. [ 1826.772000] ata3.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (398297088)
  499. [ 1826.772000] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x40)
  500. [ 1826.772000] ata3.00: revalidation failed (errno=-5)
  501. [ 1826.772000] ata3.00: limiting speed to UDMA/100:PIO3
  502. [ 1826.772000] ata3: failed to recover some devices, retrying in 5 secs
  503. [ 1831.776000] ata3: soft resetting port
  504. [ 1861.940000] ata3.01: qc timeout (cmd 0x27)
  505. [ 1861.940000] ata3.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (398297088)
  506. [ 1861.940000] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x40)
  507. [ 1861.940000] ata3.00: revalidation failed (errno=-5)
  508. [ 1861.940000] ata3.00: disabled
  509. [ 1861.940000] ata3: failed to recover some devices, retrying in 5 secs
  510. [ 1866.944000] ata3.01: failed to set xfermode (err_mask=0x40)
  511. [ 1866.944000] ata3: failed to recover some devices, retrying in 5 secs
  512. [ 1871.948000] ata3: soft resetting port
  513. [ 1902.112000] ata3.01: qc timeout (cmd 0x27)
  514. [ 1902.112000] ata3.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (398297088)
  515. [ 1902.112000] ata3.01: failed to set xfermode (err_mask=0x40)
  516. [ 1902.112000] ata3.01: limiting speed to UDMA/133:PIO3
  517. [ 1902.112000] ata3: failed to recover some devices, retrying in 5 secs
  518. [ 1907.116000] ata3: soft resetting port
  519. [ 1937.280000] ata3.01: qc timeout (cmd 0x27)
  520. [ 1937.280000] ata3.01: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (398297088)
  521. [ 1937.280000] ata3.01: failed to set xfermode (err_mask=0x40)
  522. [ 1937.280000] ata3.01: disabled
  523. [ 1937.784000] ata3: EH complete
  524. [ 1937.788000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  525. [ 1937.788000] end_request: I/O error, dev sdd, sector 65
  526. [ 1937.800000] sd 2:0:0:0: [sdc] READ CAPACITY failed
  527. [ 1937.800000] sd 2:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  528. [ 1937.800000] sd 2:0:0:0: [sdc] Sense not available.
  529. [ 1937.800000] sd 2:0:0:0: [sdc] Write Protect is off
  530. [ 1937.800000] sd 2:0:0:0: [sdc] Mode Sense: 00 00 00 00
  531. [ 1937.804000] sd 2:0:0:0: [sdc] Asking for cache data failed
  532. [ 1937.804000] sd 2:0:0:0: [sdc] Assuming drive cache: write through
  533. [ 1941.156000] EXT3-fs: unable to read superblock
  534. [ 1974.056000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  535. [ 1974.056000] end_request: I/O error, dev sdd, sector 0
  536. [ 1974.056000] Buffer I/O error on device sdd, logical block 0
  537. [ 1974.056000] Buffer I/O error on device sdd, logical block 1
  538. [ 1974.056000] Buffer I/O error on device sdd, logical block 2
  539. [ 1974.056000] Buffer I/O error on device sdd, logical block 3
  540. [ 1974.088000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  541. [ 1974.088000] end_request: I/O error, dev sdd, sector 0
  542. [ 1974.088000] Buffer I/O error on device sdd, logical block 0
  543. [ 1974.104000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  544. [ 1974.104000] end_request: I/O error, dev sdd, sector 0
  545. [ 1974.104000] Buffer I/O error on device sdd, logical block 0
  546. [ 1974.120000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  547. [ 1974.120000] end_request: I/O error, dev sdd, sector 0
  548. [ 1974.120000] Buffer I/O error on device sdd, logical block 0
  549. [ 1974.136000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  550. [ 1974.136000] end_request: I/O error, dev sdd, sector 0
  551. [ 1974.136000] Buffer I/O error on device sdd, logical block 0
  552. [ 1974.152000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  553. [ 1974.152000] end_request: I/O error, dev sdd, sector 0
  554. [ 1974.152000] Buffer I/O error on device sdd, logical block 0
  555. [ 1974.168000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  556. [ 1974.168000] end_request: I/O error, dev sdd, sector 0
  557. [ 1974.168000] Buffer I/O error on device sdd, logical block 0
  558. [ 1974.184000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  559. [ 1974.184000] end_request: I/O error, dev sdd, sector 0
  560. [ 1974.200000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  561. [ 1974.200000] end_request: I/O error, dev sdd, sector 0
  562. [ 1974.204000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  563. [ 1974.204000] end_request: I/O error, dev sdd, sector 8
  564. [ 1974.220000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  565. [ 1974.220000] end_request: I/O error, dev sdd, sector 8
  566. [ 1974.224000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  567. [ 1974.224000] end_request: I/O error, dev sdd, sector 8
  568. [ 1974.240000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  569. [ 1974.240000] end_request: I/O error, dev sdd, sector 8
  570. [ 1974.252000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  571. [ 1974.252000] end_request: I/O error, dev sdd, sector 8
  572. [ 1974.268000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  573. [ 1974.268000] end_request: I/O error, dev sdd, sector 8
  574. [ 1974.272000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  575. [ 1974.272000] end_request: I/O error, dev sdd, sector 8
  576. [ 1974.288000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  577. [ 1974.288000] end_request: I/O error, dev sdd, sector 8
  578. [ 1974.300000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  579. [ 1974.300000] end_request: I/O error, dev sdd, sector 0
  580. [ 1974.316000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  581. [ 1974.316000] end_request: I/O error, dev sdd, sector 0
  582. [ 1974.332000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  583. [ 1974.332000] end_request: I/O error, dev sdd, sector 0
  584. [ 1974.336000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  585. [ 1974.336000] end_request: I/O error, dev sdd, sector 398297080
  586. [ 1974.352000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  587. [ 1974.352000] end_request: I/O error, dev sdd, sector 0
  588. [ 1974.364000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  589. [ 1974.364000] end_request: I/O error, dev sdd, sector 0
  590. [ 1974.380000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  591. [ 1974.380000] end_request: I/O error, dev sdd, sector 0
  592. [ 1974.396000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  593. [ 1974.396000] end_request: I/O error, dev sdd, sector 0
  594. [ 1974.400000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  595. [ 1974.400000] end_request: I/O error, dev sdd, sector 0
  596. [ 1974.416000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  597. [ 1974.416000] end_request: I/O error, dev sdd, sector 0
  598. [ 1974.432000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  599. [ 1974.432000] end_request: I/O error, dev sdf, sector 0
  600. [ 1974.572000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  601. [ 1974.572000] end_request: I/O error, dev sdf, sector 0
  602. [ 1974.588000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  603. [ 1974.588000] end_request: I/O error, dev sdf, sector 0
  604. [ 1974.592000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  605. [ 1974.592000] end_request: I/O error, dev sdf, sector 0
  606. [ 1974.608000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  607. [ 1974.608000] end_request: I/O error, dev sdf, sector 0
  608. [ 1974.620000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  609. [ 1974.620000] end_request: I/O error, dev sdf, sector 0
  610. [ 1974.628000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  611. [ 1974.628000] end_request: I/O error, dev sdf, sector 0
  612. [ 1974.640000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  613. [ 1974.640000] end_request: I/O error, dev sdf, sector 0
  614. [ 1974.656000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  615. [ 1974.656000] end_request: I/O error, dev sdf, sector 0
  616. [ 1974.668000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  617. [ 1974.668000] end_request: I/O error, dev sdf, sector 8
  618. [ 1974.676000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  619. [ 1974.676000] end_request: I/O error, dev sdf, sector 8
  620. [ 1974.688000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  621. [ 1974.688000] end_request: I/O error, dev sdf, sector 8
  622. [ 1974.704000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  623. [ 1974.704000] end_request: I/O error, dev sdf, sector 8
  624. [ 1974.716000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  625. [ 1974.716000] end_request: I/O error, dev sdf, sector 8
  626. [ 1974.728000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  627. [ 1974.728000] end_request: I/O error, dev sdf, sector 8
  628. [ 1974.736000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  629. [ 1974.736000] end_request: I/O error, dev sdf, sector 8
  630. [ 1974.752000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  631. [ 1974.752000] end_request: I/O error, dev sdf, sector 8
  632. [ 1974.764000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  633. [ 1974.764000] end_request: I/O error, dev sdf, sector 0
  634. [ 1974.780000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  635. [ 1974.780000] end_request: I/O error, dev sdf, sector 0
  636. [ 1974.784000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  637. [ 1974.784000] end_request: I/O error, dev sdf, sector 0
  638. [ 1974.800000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  639. [ 1974.800000] end_request: I/O error, dev sdf, sector 490234744
  640. [ 1974.812000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  641. [ 1974.812000] end_request: I/O error, dev sdf, sector 0
  642. [ 1974.828000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  643. [ 1974.828000] end_request: I/O error, dev sdf, sector 0
  644. [ 1974.832000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  645. [ 1974.832000] end_request: I/O error, dev sdf, sector 0
  646. [ 1974.848000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  647. [ 1974.848000] end_request: I/O error, dev sdf, sector 0
  648. [ 1974.864000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  649. [ 1974.864000] end_request: I/O error, dev sdf, sector 0
  650. [ 1974.880000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  651. [ 1974.880000] end_request: I/O error, dev sdf, sector 0
  652. [ 2122.068000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  653. [ 2122.068000] end_request: I/O error, dev sdd, sector 0
  654. [ 2122.068000] printk: 56 messages suppressed.
  655. [ 2122.068000] Buffer I/O error on device sdd, logical block 0
  656. [ 2122.068000] Buffer I/O error on device sdd, logical block 1
  657. [ 2122.068000] Buffer I/O error on device sdd, logical block 2
  658. [ 2122.068000] Buffer I/O error on device sdd, logical block 3
  659. [ 2122.076000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  660. [ 2122.076000] end_request: I/O error, dev sdd, sector 0
  661. [ 2122.076000] Buffer I/O error on device sdd, logical block 0
  662. [ 2122.088000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  663. [ 2122.088000] end_request: I/O error, dev sdd, sector 0
  664. [ 2122.088000] Buffer I/O error on device sdd, logical block 0
  665. [ 2122.092000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  666. [ 2122.092000] end_request: I/O error, dev sdd, sector 0
  667. [ 2122.092000] Buffer I/O error on device sdd, logical block 0
  668. [ 2122.092000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  669. [ 2122.092000] end_request: I/O error, dev sdd, sector 0
  670. [ 2122.092000] Buffer I/O error on device sdd, logical block 0
  671. [ 2122.104000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  672. [ 2122.104000] end_request: I/O error, dev sdd, sector 0
  673. [ 2122.104000] Buffer I/O error on device sdd, logical block 0
  674. [ 2122.108000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  675. [ 2122.108000] end_request: I/O error, dev sdd, sector 0
  676. [ 2122.108000] Buffer I/O error on device sdd, logical block 0
  677. [ 2122.112000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  678. [ 2122.112000] end_request: I/O error, dev sdd, sector 0
  679. [ 2122.124000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  680. [ 2122.124000] end_request: I/O error, dev sdd, sector 0
  681. [ 2122.128000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  682. [ 2122.128000] end_request: I/O error, dev sdd, sector 8
  683. [ 2122.132000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  684. [ 2122.132000] end_request: I/O error, dev sdd, sector 8
  685. [ 2122.132000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  686. [ 2122.132000] end_request: I/O error, dev sdd, sector 8
  687. [ 2122.144000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  688. [ 2122.144000] end_request: I/O error, dev sdd, sector 8
  689. [ 2122.148000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  690. [ 2122.148000] end_request: I/O error, dev sdd, sector 8
  691. [ 2122.148000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  692. [ 2122.148000] end_request: I/O error, dev sdd, sector 8
  693. [ 2122.152000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  694. [ 2122.152000] end_request: I/O error, dev sdd, sector 8
  695. [ 2122.164000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  696. [ 2122.164000] end_request: I/O error, dev sdd, sector 8
  697. [ 2122.164000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  698. [ 2122.164000] end_request: I/O error, dev sdd, sector 0
  699. [ 2122.168000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  700. [ 2122.168000] end_request: I/O error, dev sdd, sector 0
  701. [ 2122.176000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  702. [ 2122.180000] end_request: I/O error, dev sdd, sector 0
  703. [ 2122.180000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  704. [ 2122.180000] end_request: I/O error, dev sdd, sector 398297080
  705. [ 2122.184000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  706. [ 2122.184000] end_request: I/O error, dev sdd, sector 0
  707. [ 2122.184000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  708. [ 2122.184000] end_request: I/O error, dev sdd, sector 0
  709. [ 2122.196000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  710. [ 2122.196000] end_request: I/O error, dev sdd, sector 0
  711. [ 2122.200000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  712. [ 2122.200000] end_request: I/O error, dev sdd, sector 0
  713. [ 2122.200000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  714. [ 2122.200000] end_request: I/O error, dev sdd, sector 8
  715. [ 2122.212000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  716. [ 2122.212000] end_request: I/O error, dev sdd, sector 0
  717. [ 2122.216000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  718. [ 2122.216000] end_request: I/O error, dev sdd, sector 0
  719. [ 2122.224000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  720. [ 2122.224000] end_request: I/O error, dev sdf, sector 0
  721. [ 2122.372000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  722. [ 2122.372000] end_request: I/O error, dev sdf, sector 0
  723. [ 2122.376000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  724. [ 2122.376000] end_request: I/O error, dev sdf, sector 0
  725. [ 2122.380000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  726. [ 2122.380000] end_request: I/O error, dev sdf, sector 0
  727. [ 2122.380000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  728. [ 2122.380000] end_request: I/O error, dev sdf, sector 0
  729. [ 2122.392000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  730. [ 2122.392000] end_request: I/O error, dev sdf, sector 0
  731. [ 2122.396000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  732. [ 2122.396000] end_request: I/O error, dev sdf, sector 0
  733. [ 2122.396000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  734. [ 2122.396000] end_request: I/O error, dev sdf, sector 0
  735. [ 2122.400000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  736. [ 2122.400000] end_request: I/O error, dev sdf, sector 0
  737. [ 2122.412000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  738. [ 2122.412000] end_request: I/O error, dev sdf, sector 8
  739. [ 2122.412000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  740. [ 2122.412000] end_request: I/O error, dev sdf, sector 8
  741. [ 2122.416000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  742. [ 2122.416000] end_request: I/O error, dev sdf, sector 8
  743. [ 2122.428000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  744. [ 2122.428000] end_request: I/O error, dev sdf, sector 8
  745. [ 2122.428000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  746. [ 2122.428000] end_request: I/O error, dev sdf, sector 8
  747. [ 2122.432000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  748. [ 2122.432000] end_request: I/O error, dev sdf, sector 8
  749. [ 2122.432000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  750. [ 2122.432000] end_request: I/O error, dev sdf, sector 8
  751. [ 2122.444000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  752. [ 2122.444000] end_request: I/O error, dev sdf, sector 8
  753. [ 2122.448000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  754. [ 2122.448000] end_request: I/O error, dev sdf, sector 0
  755. [ 2122.448000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  756. [ 2122.448000] end_request: I/O error, dev sdf, sector 0
  757. [ 2122.452000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  758. [ 2122.452000] end_request: I/O error, dev sdf, sector 0
  759. [ 2122.460000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  760. [ 2122.460000] end_request: I/O error, dev sdf, sector 490234744
  761. [ 2122.464000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  762. [ 2122.464000] end_request: I/O error, dev sdf, sector 0
  763. [ 2122.468000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  764. [ 2122.468000] end_request: I/O error, dev sdf, sector 0
  765. [ 2122.468000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  766. [ 2122.468000] end_request: I/O error, dev sdf, sector 0
  767. [ 2122.484000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  768. [ 2122.484000] end_request: I/O error, dev sdf, sector 0
  769. [ 2122.484000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  770. [ 2122.484000] end_request: I/O error, dev sdf, sector 8
  771. [ 2122.496000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  772. [ 2122.496000] end_request: I/O error, dev sdf, sector 0
  773. [ 2122.496000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  774. [ 2122.496000] end_request: I/O error, dev sdf, sector 0
  775. [ 2203.404000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  776. [ 2203.404000] end_request: I/O error, dev sdd, sector 0
  777. [ 2203.404000] printk: 56 messages suppressed.
  778. [ 2203.404000] Buffer I/O error on device sdd, logical block 0
  779. [ 2203.404000] Buffer I/O error on device sdd, logical block 1
  780. [ 2203.404000] Buffer I/O error on device sdd, logical block 2
  781. [ 2203.404000] Buffer I/O error on device sdd, logical block 3
  782. [ 2203.408000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  783. [ 2203.408000] end_request: I/O error, dev sdd, sector 0
  784. [ 2203.408000] Buffer I/O error on device sdd, logical block 0
  785. [ 2203.412000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  786. [ 2203.412000] end_request: I/O error, dev sdd, sector 398297080
  787. [ 2203.412000] Buffer I/O error on device sdd, logical block 49787135
  788. [ 2203.412000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  789. [ 2203.412000] end_request: I/O error, dev sdd, sector 398297080
  790. [ 2203.412000] Buffer I/O error on device sdd, logical block 49787135
  791. [ 2203.416000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  792. [ 2203.416000] end_request: I/O error, dev sdd, sector 0
  793. [ 2203.416000] Buffer I/O error on device sdd, logical block 0
  794. [ 2203.416000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  795. [ 2203.416000] end_request: I/O error, dev sdd, sector 8
  796. [ 2203.416000] Buffer I/O error on device sdd, logical block 1
  797. [ 2203.416000] Buffer I/O error on device sdd, logical block 2
  798. [ 2203.420000] sd 2:0:1:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  799. [ 2203.420000] end_request: I/O error, dev sdd, sector 0
  800. [ 2208.440000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  801. [ 2208.440000] end_request: I/O error, dev sdf, sector 0
  802. [ 2208.440000] printk: 2 messages suppressed.
  803. [ 2208.440000] Buffer I/O error on device sdf, logical block 0
  804. [ 2208.448000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  805. [ 2208.448000] end_request: I/O error, dev sdf, sector 0
  806. [ 2208.456000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  807. [ 2208.456000] end_request: I/O error, dev sdf, sector 490234744
  808. [ 2208.460000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  809. [ 2208.460000] end_request: I/O error, dev sdf, sector 490234744
  810. [ 2208.468000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  811. [ 2208.468000] end_request: I/O error, dev sdf, sector 0
  812. [ 2208.468000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  813. [ 2208.468000] end_request: I/O error, dev sdf, sector 8
  814. [ 2208.480000] sd 3:0:1:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
  815. [ 2208.480000] end_request: I/O error, dev sdf, sector 0
  816. [ 2384.244000] EXT2-fs: unable to read superblock

advertising

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

comments powered by Disqus
worth-right